Parameters of electrostatic spraying and its influence on the application efficiency

When the electrostatic spraying is used correctly, it provides advantages over conventional systems, however many factors can affect the system efficiency. Therefore, the objective of this study was to evaluate the charge/mass ratio (Q/M) at different spraying distances (0, 1, 2, 3, 4 and 5 m), and the liquid deposition efficiency on the target. Evaluating the Q/M ratio the Faraday cage method was used and to evaluate the liquid deposition efficiency the artificial targets were positioned longitudinally and transversely to the spray jet. It was found that the spraying distance affects the Q/M ratio, consequently, the liquid deposition efficiency. For the closest distance to the target the Q/M ratio was 4.11 mC kg-1, and at distances of 1, 2, 3, 4 and 5 m, the ratio decreased to 1.38, 0.64, 0.31, 0.17 and 0.005 mC kg-1, respectively. For the liquid deposition, the electrostatic system was affected by the target orientation and spraying distance. The target transversely to the jet of liquid did not improve the liquid deposition, but longitudinally increased the deposition up to 3 meters of distance.

Crescimento de crambe na presença ou ausência de competição interespecífica

RESUMOCrambe (Crambe abyssinica) has a cropping cycle of around 90 days, being suitable as an alternative to the second grain crop planted after soybean is harvested in the Center West region of Brazil. It is necessary to understand the growth and development dynamics of crambe plants in order to allow correct management of the production factors. This study aimed to describe the growth and development parameters of crambe plants under presence or absence of interspecific competition. The experiment was installed in the fall-winter 2011 in an Oxisoil, in completely randomized blocks design with three replications. Treatments comprised crambe plants growing either in presence or absence of interspecific simulated competition, throughout the cropping cycle. Plants were collected for the growth analysis every 15 days from harvest until 75 days after emergence. Growth parameters leaf area (AF), dry mass of stems/culms (MSC), leaves (MSF) and total (MST) dry mass, leaf area index (IAF), absolute (TCA) and relative (TCR) growth rates, net assimilation rate (TAL), specific leaf area (AFE), leaf area duration (DAF), leaf area ratio (RAF) and leaf mass ratio (RMF) were determined for the crop plants, subjected or not to competition, as well as for the simulated competitor. Crambe is a low competitive crop, being the competition more severe until 60-70 days after emergence. Besides, crop performance under field conditions was properly described by the net assimilation rate (TAL), which is also affected by the leaf area duration (DAF) and leaf mass ratio (RMF).

HEART ANEURYSM IN CHAGAS' DISEASE

This prospective study on 41 autopsy collected human hearts concerns the "apical" lesion in Chagas' disease. Previous report did not show a correlation between lesion frequency and heart weight then discarding a vascular factor in its pathogenesis. The present paper involves other variables besides the heart weight to evaluate the relative coronary insufficiency. Distinct colored gel (green and red) injected through the capillary beds of both coronary arteries defined the extent of both vessels before separating the atria and removing the sub-epicardium fat. The Right Ventricle (RV) and Left Ventricle (LV) free walls furnished the RV/LV mass ratio. The myocardium mass colored green (right coronary artery - RC) and the whole Ventricular Weight (VW) determined the RC/VW mass ratio. The heart weight plus these mass ratios, graded and added, composed a score inversely proportional to the myocardium irrigation condition. It intended to be a more sensitive morphologic evaluation of the relative ischaemia to correlate to the apical lesion. This study showed a right deviation for the relative accumulated frequency of lesions plotted as a score function and a significant difference for higher scores in hearts with aneurysm. It suggests a ischaemic factor intervening in the apical lesion pathogenesis in Chagas' cardiopathy.

Effects of losartan on ventricular remodeling in experimental infarction in rats

OBJECTIVE: To evaluate the effects of losartan on ventricular remodeling and on survival after myocardial infarction in rats. METHODS: After surgical occlusion of left coronary artery, 84 surviving male Wistar rats were divided into two groups: LO treated with losartan (20mg/kg/day, n=33) and NT (n=51), without medication. After 3 months, we analyzed mortality; ventricular to body mass ratio (VM /BM); myocardial hydroxyproline concentration (HOP); isovolumetric pressure, +dp/dt, -dp/dt, and diastolic volume/left ventricle mass ratio (VO/LV). RESULTS: Mortality was: LO = 22%, and NT = 47% (p<0.05). Ventricular mass,(VM/BM, mg/g) was 4.14 ± 0.76 and 3.54±0.48, in the NT and LO groups, respectively (p<0.05). HOP (median) was 4.92 upsilong/mg in the LO and 5.54 upsilong/g in the NT group (p>0.05). The V0/LV values (median) were 0.24 mL/g in group LO and 0.31 mL/g in group NT (p<0.05) compared to NT group. There were no differences between the groups for +dp/dt and -dp/dt parameters. CONCLUSION: 1- The use of losartan myocardial infarction causes an attenuation of ventricular remodeling, bringing about an increased survival, an attenuation of ventricular hypertrophy and dilation, and an improvement of the isovolumetric pressure; 2- the treatment does not modify the myocardial collagen concentration.

Fecundity of Biomphalaria straminea and B. glabrata in the laboratory: a twelve-month comparative study

In the present comparative study a Biomphalaria straminea sample from Picos (Piauí) showed expressive advantages related to fecundity over a B. glabrata sample from Belo Horizonte (Minas Gerais) such as: higher egg-mass production in 10 out of 12 months of study; higher egg production in all months of study; higher egg per egg-mass ratio in 11 out of 12 months of study; 66% of the egg-masses containing more than 20 eggs while in B. glabrata 70% of the egg-masses showed less than 20 eggs; three times less empty egg capsules than B. glabrata; attainning maximum fecundity in half the time required by B. glabrata. Mortality however was higher and sooner in B. straminea, suggesting higher semelparity in this species than in B. glabrata, a possibility that requires confirmation through long-term studies with other samples of both species. This first finding of a B. straminea sample more fecund than B. glabrata is discussed in relation to other data from the literature, and some recommendations are made on the quantification of fecundity of planorbid snails.

Reciclagem química de zeólitas comerciais desativadas

Pyro and hydrometallurgical processes were applied to the treatment of spent commercial zeolites (a molecular sieve and a ZSM-5 sample). Both catalysts were employed in pilot plant units. They were kept in their original shape, they were not regenerated and were not subjected neither to mechanical stress nor to overheating zones during their time on-stream. Two recycling processes were tested: (i) direct solubilization of samples in mixtures of HF + H2O2 (60 ºC, 1 h). Although silicon was solubilized, insoluble matter was found in both samples, particularly in the molecular sieve, due to its high amounts of alkaline and alkaline-earth metals; (ii) fusion with KHSO4 (5 h, 600 ºC) with KHSO4/zeolite mass ratio 6:1. After fusion the solid was solubilized in water (100 ºC), leaving silicon as SiO2 residue. In both processes, solubilized metals were isolated by conventional selective precipitation techniques. Analysis of final products by common analytical methods shows that metals present in the original catalysts were recovered with very high yields except when the molecular sieve was treated with HF + H2O2. This reactant mixture proved to be suitable for processing zeolites with a low alkaline and alkaline-earth metal content whereas fusion with KHSO4 appeared to be adequate for all types of zeolites.

Recuperação de metais de catalisadores de hidrorrefino usados via fusão com KHSO4

This work describes a process for metal recovery from spent NiMo and CoMo/Al2O3 commercial hydrorefining catalysts. The samples were treated by fusion with potassium hydrogen sulfate (5 h, 600 ºC) with a KHSO4/catalyst mass ratio of 10:1. After fusion the solid was solubilized in water (100 ºC), leaving silicon compounds as residue. Losses of nickel and cobalt may reach 16 wt% of the amount present in the sample, depending on the silicon content. Soluble metals were isolated by selective precipitation techniques (nickel, cobalt, aluminum) or by solvent extraction with methyl-isobutyl ketone (molybdenum) in a hydrochloric acid medium. All metals were recovered in very good yields except for nickel and cobalt in the presence of considerable amounts of silicon. Soluble wastes consist of potassium/sodium sulfates/chlorides. Solid wastes correspond to about 4 wt% of the catalyst and can be discarded in industrial dumps.

Parâmetros operacionais no processamento de zeólitas desativadas por fusão com KHSO4

This work presents a study on the determination of the optimal experimental conditions for processing spent commercial zeolites in order to recover lanthanide elements and eventually other elements. The process is based on the fusion of the sample with potassium hydrogenosulfate (KHSO4). Three experimental parameters were studied: temperature, reaction time and catalyst/flux mass ratio. After fusion the solid was dissolved in water and the amount of insoluble matter was used to determine the efficiency of the process. The optimized experimental parameters depend on the composition of the sample processed. Under such conditions the insoluble residue corresponds to SiO2. Lanthanide elements and aluminum present in solution were isolated by conventional precipitation techniques; the yields were at least 75 wt%. The final generated wastes correspond to neutral colorless solutions containing alkali chlorides/sulfates and solids that can be disposed of in industrial dumps.

Seedling growth of fifteen Brazilian tropical tree species differing in successional status

Growth of seedlings of fifteen tropical tree species representative, at the adult stage, of different successional positions, was studied under field conditions. Seedlings were grown in three treatments: full sun (FS), artificial shade imposed by neutral screens (AS) and natural shade imposed by a closed canopy in a Forest Reserve in Southeast Brazil (NS). Most of the studied species survived in both shade treatments, although their growth was severely affected. Decreases in height, internode numbers, dry weight, leaf area, root:shoot ratio (R:S) and increases in leaf mass ratio (LMR), leaf area ratio (LAR) and specific leaf area (SLA) were common responses to shade. Relative growth rates (RGRs) and net assimilation rates (NARs) were consistently lower in the shaded treatments than in full sun. RGR was significantly correlated with NAR in the FS and NS treatments, whereas it was correlated with LAR in the AS treatment. Natural shade had more severe effects than artificial shade on leaf area reduction and RGR. Between-species differences in R:S, LMR, SLA and LAR were not related to the successional status of species. However, there was a tendency for early-successional species to have higher RGRs than late successional ones, regardless of the light environment. Late-successional species also showed less pronounced responses to shade than early ones. The characteristics presented by the late-successional species may be associated with shade tolerance, enabling their persistence under dense canopies.

Seed characteristics and dispersal of dimorphic fruit segments of Cakile maritima Scopoli (Brassicaceae) population of southern Brazilian coastal dunes

Cakile maritima occurs sporadically along the southern Brazilian coast, where it is restricted to more protected sites at the base of foredunes. Somatic dimorphism in C. maritima is manifested as morphologically distinct upper and lower fruit segments (silicules). The two morphs were tested for differences in size, number of seeds, dispersal ability and natural establishment. In the C. maritima population of southern Brazil, the lower silicule has more seeds than upper silicule, and lower seeds are more likely to abort than the upper ones. Seeds from upper segments were significantly larger than those from lower ones; however, their mass ranges overlap. The mean silicule mass was not significantly different from both segments, but the silicule/seed mass ratio from upper and lower segments was significantly different. Both segments had high ability to float in sea water, more than 50% were still afloat after 70 days. Nevertheless, dispersal occurs mainly to landward due to dominant wind action. Most of the seedlings were restricted to within a one-metre radius of the mother plant, and were principally derived from lower fruit segments.

Fatty acid ethyl esters production using a non-commercial lipase in pressurized propane medium

The objective of this work is to investigate the production of fatty acid ethyl esters from soybean oil in compressed propane using a non-commercial lipase from Yarrowia lipolytica and two commercial ones as catalysts, Amano PS and Amano AY30. The experiments were performed in the temperature range of 35-65 °C. at 50 bar, enzyme concentration of 5 wt%, oil to ethanol molar ratio of 1:6 and 1:9, and solvent to substrates mass ratio of 2:1 and 4:1. The results indicated that low reaction conversions were generally obtained with the use of commercial and non-commercial lipases in pressurized propane medium. On the other hand, the aspects of low solvent to substrates mass ratio and mild temperature and pressure operating conditions used to produce ethyl esters justify further investigations to improve reaction yields.

Use of simulated annealing in standardization and optimization of the acerola wine production

In this study, seven wine samples were prepared varying the amount of pulp of acerola fruits and the sugar content using the simulated annealing technique to obtain the optimal sensory qualities and cost for the wine produced. S. cerevisiae yeast was used in the fermentation process and the sensory attributes were evaluated using a hedonic scale. Acerola wines were classified as sweet, with 11°GL of alcohol concentration and with aroma, taste, and color characteristics of the acerola fruit. The simulated annealing experiments showed that the best conditions were found at mass ratio between 1/7.5-1/6 and total soluble solids between 28.6-29.0 °Brix, from which the sensory acceptance scores of 6.9, 6.8, and 8.8 were obtained for color, aroma, and flavor, respectively, with a production cost 43-45% lower than the cost of traditional wines commercialized in Brazil.

DISCORDANCE BETWEEN BODY MASS INDEX AND ANTHROPOMETRIC MEASUREMENTS AMONG HIV-1-INFECTED PATIENTS ON ANTIRETROVIRAL THERAPY AND WITH LIPOATROPHY/LIPOHYPERTROPHY SYNDROME

Introduction: Highly Active Antiretroviral Therapy (HAART) has improved and extended the lives of thousands of people living with HIV/AIDS around the world. However, this treatment can lead to the development of adverse reactions such as lipoatrophy/lipohypertrophy syndrome (LLS) and its associated risks. Objective: This study was designed to assess the prevalence of self-reported lipodystrophy and nutritional status by anthropometric measurements in patients with HIV/AIDS. Methods: An observational study of 227 adult patients in the Secondary Immunodeficiencies Outpatient Department of Dermatology, Hospital das Clínicas, Faculty of Medicine, University of São Paulo (3002 ADEE-HCFMUSP). The sample was divided into three groups; Group 1 = 92 patients on HAART and with self-reported lipodystrophy, Group 2 = 70 patients on HAART without self-reported lipodystrophy and Group 3 = 65 patients not taking HAART. The nutritional status of individuals in the study sample was determined by body mass index (BMI) and percentage of body fat (% BF). The cardiovascular risk and diseases associated with abdominal obesity were determined by waist/hip ratio (WHR) and waist circumference (WC). Results: The prevalence of self-reported lipoatrophy/lipohypertrophy syndrome was 33% among women and 59% among men. Anthropometry showed depletion of fat mass in the evaluation of the triceps (TSF) in the treatment groups with HAART and was statistically independent of gender; for men p = 0.001, and for women p = 0.007. Similar results were found in the measurement of skin folds of the upper and lower body (p = 0.001 and p = 0.003 respectively). In assessing the nutritional status of groups by BMI and % BF, excess weight and body fat were more prevalent among women compared to men (p = 0.726). The WHR and WC revealed risks for cardiovascular and other diseases associated with abdominal obesity for women on HAART and with self-reported LLS (p = 0.005) and (p = 0.011). Conclusions: Anthropometric measurements were useful in the confirmation of the prevalence of LLS. BMI alone does not appear to be a good parameter for assessing the nutritional status of HIV-infected patients on HAART and with LLS. Other anthropometric measurements are needed to evaluate patients with the lipoatrophy/lipohypertrophy syndrome.

Systemic hypertension, diabetes mellitus, and dyslipidemia in relation to body mass index: evaluation of a Brazilian population

OBJECTIVE: To determine the prevalence of systemic hypertension, diabetes mellitus, hypercholesterolemia, and hypertriglyceridemia in a Brazilian population in relation to body mass index. METHOD: Retrospective evaluation of 1213 adults (mean age: 45.2 ± 12.8; 80.6% females) divided into groups according to body mass index [normal (18.5 - 24.4 kg/m²); overweight (25 - 29.9 kg/m²); grade 1 obesity (30 - 34.9 kg/m²); grade 2 obesity (35 - 39.9 kg/m²), and grade 3 obesity (> 40 kg/m²)]. The prevalence of hypertension, diabetes mellitus, hypercholesterolemia, and hypertriglyceridemia were analyzed in each group. The severity of cardiovascular risk was determined. High-risk patients were considered those reporting 2 or more of the following factors: systemic hypertension, HDL < 35 mg/dL, total cholesterol > 240 mg/dL, triglycerides > 200 mg/dL when HDL < 35 mg/dL, and glycemia > 126 mg/dL. Moderate-risk patients were those reporting 2 or more of the following factors: systemic hypertension, HDL < 45, triglycerides > 200 mg/dL, and total cholesterol > 200 mg/dL. RESULTS: The prevalence of systemic hypertension, diabetes mellitus, hypertriglyceridemia, and low HDL-cholesterol levels increased along with weight, but the prevalence of hypercholesterolemia did not. The odds ratio adjusted for gender and age, according to grade of obesity compared with patients with normal weight were respectively 5.9, 8.6, and 14.8 for systemic hypertension, 3.8, 5.8, and 9.2 for diabetes mellitus and 1.2, 1.3, and 2.6 for hypertriglyceridemia. We also verified that body mass index was positively related to cardiovascular high risk (P < .001) CONCLUSION: In our population, cardiovascular risk increased along with body mass index.

Isotope determination of sulfur by mass spectrometry in soil samples

Sulphur plays an essential role in plants and is one of the main nutrients in several metabolic processes. It has four stable isotopes (32S, 33S, 34S, and 36S) with a natural abundance of 95.00, 0.76, 4.22, and 0.014 in atom %, respectively. A method for isotopic determination of S by isotope-ratio mass spectrometry (IRMS) in soil samples is proposed. The procedure involves the oxidation of organic S to sulphate (S-SO4(2-)), which was determined by dry combustion with alkaline oxidizing agents. The total S-SO4(2-) concentration was determined by turbidimetry and the results showed that the conversion process was adequate. To produce gaseous SO2 gas, BaSO4 was thermally decomposed in a vacuum system at 900 ºC in the presence of NaPO3. The isotope determination of S (atom % 34S atoms) was carried out by isotope ratio mass spectrometry (IRMS). In this work, the labeled material (K2(34)SO4) was used to validate the method of isotopic determination of S; the results were precise and accurate, showing the viability of the proposed method.