14 resultados para Joy
em Scielo Saúde Pública - SP
Resumo:
Sera from patients infected with Taenia solium, Hymenolepis nana and Echinococcus granulosus were tested against homologous and heterologous parasite antigens using an ELISA assay, and a high degree of cross-reactivity was verified. To identify polypeptides responsible for this cross reactivity, the Enzyme Linked Immunoelectro Transfer Blot (EITB) was used. Sera from infected patients with T.solium, H.nana, and E.granulosus were assessed against crude, ammonium sulphate precipitated (TSASP), and lentil-lectin purified antigens of T.solium and crude antigens of.H.nana and E.granulosus. Several bands, recognized by sera from patients with T.solium, H.nana, and E.granulosus infections, were common to either two or all three cestodes. Unique reactive bands in H.nana were noted at 49 and 66 K-Da and in E.granulosus at 17-21 K-Da and at 27-32 K-Da. In the crude cysticercosis extract, a specific non glycoprotein band was present at 61-67 K-Da in addiction to specific glycoprotein bands of 50, 42, 24, 21, 18, 14, and 13 K-Da. None of the sera from patients with H.nana or E.granulosus infection cross reacted with these seven glycoprotein bands considered specific for T.solium infection.
Resumo:
Introduction: This work was carried out on the purpose of identifying the species of phlebotomine sandflies in the municipality of Monte Negro, state of Rondonia, Brazil, that may have been transmitting the American cutaneous leishmaniasis (ACL), and concisely describe epidemiological aspects of disease. METHODS: The epidemiologic and socioeconomical indicators were obtained from government institutions and the local Municipal Secretary of Health. Phlebotomine sandflies were captured using CDC light traps between July 2006 to July 2008. The total of 1,240 of female sandflies were examined by PCR method directed to k-DNA. RESULTS: There has been a significant decrease in the incidence of ACL of about 50% over the last ten years in the municipality. A total of 1,935 specimens of 53 sandfly species were captured, three of the genus Brumptomyia genus and 50 of the genus Lutzomyia. The predominant species was Lutzomyia acanthopharynx, Lutzomyia whitmani, Lutzomyia geniculata and Lutzomyia davisi. None were positive for Leishmania sp. CONCLUSIONS: Four sandflies species were found in the State of Rondonia for the first time: Brumptomyia brumpti, Lutzomyia tarapacaensis, Lutzomyia melloi and Lutzomyia lenti. The presence of Lutzomyia longipalpis, was also captured. Socioeconomical improvement of Brazilian economy and the increase of environmental surveillance in the last 15 years collaborated in the decrease of people exposed to vectors, reducing the incidence of ACL.
Resumo:
Filmes compostos de gelatina com amidos nativos de trigo, sorgo, batata e arroz foram produzidos separadamente e caracterizados quanto às propriedades físico-químicas (solubilidade em água e barreira ao vapor de água), físicas (espessura e opacidade) e mecânicas (resistência à tração e porcentagem de elongação na ruptura). As mesmas soluções filmogênicas foram preparadas e aplicadas em uvas Crimson para avaliação sensorial e acompanhamento da perda de massa durante 22 dias. As coberturas de sorgo e arroz foram as mais eficientes na extensão da vida útil (aumento de 10 dias). Entretanto, em relação aos atributos sensoriais, as uvas com cobertura de arroz não diferiram estatisticamente do controle, que apresentou as menores notas para os parâmetros de aparência global e intenção de compra. O filme de sorgo apresentou uma permeabilidade ao vapor de água de 5,40 g.mm.m-2.d.kPa, resistência à tração de 85,89 MPa, elongação de 6,61% e opacidade de 40%. Mesmo não apresentando os melhores valores de caracterização, como filme, tornou-se a melhor opção como cobertura. Na avaliação sensorial, as uvas cobertas obtiveram aceitação igual ou maior que o controle quanto à aparência global, brilho, cor e intenção de compra. Na degustação das uvas, nenhuma das coberturas exerceu influência significativa no aroma, sabor e textura, sendo aceitas pelo consumidor em todos os parâmetros.
Resumo:
Neste trabalho, estudou-se a aplicação da enzima lipase e do emulsificante monoglicerídeo em pão de forma enriquecido com fibras, com o objetivo de verificar a possibilidade de substituição do emulsificante pela enzima. Inicialmente, foi realizada a caracterização das matérias-primas principais (farinha e farelo de trigo). Os pães de forma foram elaborados pelo método de massa direta. Foi utilizado um planejamento experimental do tipo composto central rotacional com duas variáveis independentes: i) dosagem de lipase; e ii) dosagem de monoglicerídeo e, paralelamente, realizou-se um teste controle (sem adição de lipase e monoglicerídeo) para comparação. As variáveis dependentes foram as características de qualidade dos pães: i) volume específico; ii) aceitação sensorial (aparência, textura, aroma e sabor); e iii) vida de prateleira avaliada pela umidade do miolo e firmeza dos pães após 1, 4 e 7 dias do forneamento. Dentro das faixas estudadas, foi possível verificar que somente a umidade dos pães no quarto e sétimo dia após o processamento foi influenciada pela variação das dosagens de lipase e monoglicerídeo. Na avaliação sensorial, verificou-se que as notas médias atribuídas aos pães do teste controle foram inferiores à menor nota média dos ensaios do planejamento experimental, com exceção do sabor e aroma. Como não foi possível obter modelos matemáticos para todas as respostas, foram selecionados os ensaios 5 (1% monoglicerídeo), 7 (25 ppm lipase) e 9 (25 ppm lipase e 1% monoglicerídeo) do planejamento experimental, e o teste controle, para a avaliação dos resultados por análise de variância. Nas condições em que os ensaios foram conduzidos e para as faixas de lipase (0 a 50 ppm) e monoglicerídeo (0 a 2%) estudadas, verificou-se a possibilidade de substituir o monoglicerídeo por lipase em formulação de pão de forma enriquecido com fibras.
Resumo:
A tendência do consumidor atual é utilizar alimentos de fácil preparo que, adicionalmente à qualidade nutritiva, tragam benefícios à saúde. Neste trabalho, uma massa alimentícia fresca funcional foi desenvolvida pela incorporação de Isolado Protéico de Soja (IPS) e polidextrose, utilizando páprica como corante. O consumo de IPS pode contribuir para a diminuição dos níveis de colesterol, enquanto a polidextrose, funcionando como fibra, pode promover a redução de risco de câncer de cólon. A otimização da formulação foi realizada utilizando-se um delineamento fatorial completo 23, considerando como variáveis independentes os teores de: i) IPS; ii) polidextrose; e iii) páprica. Os efeitos destas variáveis na qualidade da massa alimentícia foram avaliados em função das características físico-químicas (cor e teste de cozimento), textura instrumental e propriedades sensoriais. Na avaliação dos parâmetros físicos, observou-se que a cor instrumental da massa crua foi influenciada apenas pelo teor de páprica; já o tempo de cozimento (2,5 minutos), o aumento de massa (1,40 a 1,64%) e a perda de sólidos (3,80 a 5,56%) não foram influenciados pelos ingredientes utilizados; e a elasticidade (parâmetro da textura instrumental) foi reduzida com o aumento do teor de polidextrose. Na avaliação sensorial da massa crua, o aumento na porcentagem de IPS e a redução na porcentagem de polidextrose afetaram positivamente a aceitação global e a intenção de compra; e os aumentos nas porcentagens de IPS e de páprica aumentaram a aceitação da cor. Na avaliação sensorial da massa cozida, observou-se que o IPS teve influência positiva sobre a textura, enquanto que a polidextrose e a páprica afetaram negativamente este parâmetro. Entretanto, na avaliação da intenção de compra da massa cozida, não houve influência dos ingredientes adicionados. Os percentuais ideais de adição de polidextrose, isolado protéico de soja e páprica foram de 3,5, 8,0 e 1,5%, respectivamente.
Resumo:
O presente trabalho avaliou a utilização de farelo de trigo e polidextrose como fontes de fibra no enriquecimento de biscoitos de polvilho. Utilizou-se a Metodologia de Superfície de Resposta para verificar a influência da adição destes ingredientes nos parâmetros de qualidade dos biscoitos. As respostas avaliadas do planejamento experimental fatorial completo 2² foram o volume específico, a dureza instrumental, a umidade e a cor - parâmetros L, a* e b*. Para as respostas: volume específico e dureza instrumental, todos os fatores foram significativos, a 95% de confiança, com R² = 0,9307 e 0,8091, respectivamente. Pela análise das superfícies geradas, pode-se observar que o farelo de trigo e a polidextrose reduziram o volume específico e o farelo teve maior efeito no aumento da dureza. A substituição de polvilho azedo por farelo de trigo e polidextrose nas proporções de 1,5 e 5%, respectivamente, gerou uma amostra rica em fibras, com 6,23% de fibra alimentar (calculado teoricamente), sem prejuízo considerável para as características de expansão e dureza, e com boa aceitação sensorial.
Resumo:
Coberturas comestíveis biodegradáveis são uma alternativa às embalagens sintéticas, que causam preocupações ambientais. Este trabalho avaliou o efeito de diferentes tipos de coberturas sobre propriedades físico-químicas de bolo de chocolate durante a estocagem, em comparação com bolo sem cobertura (CO) e bolo sem cobertura embalado em polipropileno (EMB). As seguintes coberturas foram aplicadas sobre os bolos: 10% gelatina (GE), 10% gelatina com 10% ácido esteárico (GE + AE), 18% cera de carnaúba (CE), 10% amido modificado (AM) e fondant (FO). Os bolos foram avaliados durante 10 dias de estocagem. FO e EMB apresentaram menor perda de massa, enquanto todos os demais tratamentos apresentaram valores superiores a CO. GE, GE + AE e EMB apresentaram a menor redução da atividade de água, enquanto CE e CO apresentaram a maior redução. As superfícies dos bolos recobertos estavam mais duras que as de CO e EMB. Os maiores valores para dureza e mastigabilidade foram encontrados para CE e CO e os menores, para EMB, GE e GE + AE. Em relação à cor, GE + AE foi diferente dos demais tratamentos, devido à presença do ácido esteárico. Os resultados indicam que a perda de massa dos bolos pode ser atribuída também à perda de água das coberturas.
Resumo:
In this work, the effects of thermoplastic extrusion process parameters (raw material moisture content and temperature) and the addition of functional ingredients (lycopene and soy protein) on quality characteristics of a base-formulation for extruded corn snacks were studied, with the objective of developing an easy-to-eat functional product. A single-screw Labor PQ 30 model Inbramaq extruder was used for extrusion and a central composite rotational design (CCRD) was followed. The independent variables were: i) percentage of soy protein isolate (0-30%); ii) percentage of lycopene preparation (0-0.1%); iii) raw material moisture content (20-30%); and iv) 5th zone temperature (100-150 °C). The expansion index reached maximum values with the lowest raw material moisture content (20%) and intermediate temperatures (approximately 125 °C). Instrumental hardness was higher with high moisture and low temperature; however, increasing the percentage of soy protein was beneficial for the texture of the product, reducing hardness. The red color intensity increased with the increase in lycopene content and moisture, and with the reduction of temperature. Sensory acceptance tests were carried out for two products, with maximum percentages of the functional ingredients, 20% moisture and temperatures of 125 and 137 °C, with greater acceptance for the product extruded at 125 °C.
Resumo:
Este trabalho avaliou a influência da aplicação de coberturas comestíveis na aceitação sensorial e na intenção de compra de bolos de chocolate. Os tratamentos estudados foram: sem cobertura e sem embalagem; embalados em sacos de polipropileno; revestidos com coberturas à base de 10% de gelatina, 10% de gelatina com 10% de ácido esteárico, 10% de amido modificado, 18% de cera de carnaúba e fondant. Nos dias 1 e 3 de estocagem, os bolos com e sem coberturas foram avaliados quanto à aceitação da cor, aroma, sabor, textura e aceitação global, além da intenção de compra. Os bolos recobertos com fondant foram os mais bem aceitos nos atributos avaliados, apresentando elevada intenção de compra. Os bolos com as demais coberturas apresentaram uma aceitação similar aos bolos controle não recobertos, com e sem embalagem. No entanto, sua intenção de compra ficou abaixo do desejável. As coberturas eram perceptíveis sensorialmente e não conferiram características próximas às do fondant, provavelmente frustrando os provadores, que esperavam bolos com coberturas/recheios mais ricos. Apesar disto, todas as coberturas avaliadas apresentaram desempenho similar à embalagem na manutenção da textura dos bolos.
Resumo:
The aim of this study was to determine the influence of process parameters and Passion Fruit Fiber (PFF) addition on the Glycemic Index (GI) of an extruded breakfast cereal. A 2³ Central Composite Rotational Design (CCRD) was used, with the following independent variables: raw material moisture content (18-28%), 2nd and 3rd barrel zone temperatures (120-160 ºC), and PFF (0-30%). Raw materials (organic corn flour and organic PFF) were characterized as to their proximate composition, particle size, and in vitro GI. The extrudates were characterized as to their in vitro GI. The Response Surface Methodology (RSM) and Principal Component Analysis (PCA) were used to analyze the results. Corn flour and PFF presented 8.55 and 7.63% protein, 2.61 and 0.60% fat, 0.52 and 6.17% ash, 78.77 and 78.86% carbohydrates (3 and 64% total dietary fiber), respectively. The corn flour particle size distribution was homogeneous, while PFF presented a heterogeneous particle size distribution. Corn flour and PFF presented values of GI of 48 and 45, respectively. When using RSM, no effect of the variables was observed in the GI of the extrudates (average value of 48.41), but PCA showed that the GI tended to be lower when processing at lower temperatures (<128 ºC) and at higher temperatures (>158 ºC). When compared to white bread, the extrudates showed a reduction of the GI of up to 50%, and could be considered an interesting alternative in weight and glycemia control diets.
Resumo:
The aim of this study was to verify the influence of the addition of the enzyme xylanase (four concentrations: 0, 4, 8, and 12 g.100 kg-1 flour) on the characteristics of loaf bread made with white wheat flour or whole grain wheat flour. Breads made from white flour and added with xylanase had higher specific volumes than those of the control sample (no enzyme); however, the specific volume did not differ significantly (p < 0.05) among the breads with different enzyme concentrations. All formulations made from whole grain wheat flour and added with xylanase also had specific volumes significantly higher than those of the control sample, and the highest value was found for the 8 g xylanase.100 kg-1 flour formulation. With respect to moisture content, the formulations with different enzyme concentrations showed small significant differences when compared to the control samples. In general, breads made with the addition of 8 g enzyme.100 kg-1 flour had the lowest firmness values, thus presenting the best technological characteristics.
Resumo:
The aim of this study was to develop fettuccini type rice fresh pasta by cold extrusion. To produce the pasta, a 2² Central Composite Rotational Design was used, in which the effects of the addition of pre-gelatinized rice flour - PGRF (0-60%) and modified egg albumin - MEA (0-10%) were studied. The dependent variables were the results of the cooking test and of the instrumental texture. The optimum cooking time for all of the formulations of rice fresh pasta was 3 minutes. MEA had a greater effect on increasing the weight of the pasta when compared to that of PGRF. It was found that with the addition of PGRF increase in loss of solids in cooking water, whereas MEA exerted the opposite effect on this parameter. Moreover, the maximum value of MEA (10%) had an optimum effect on pasta firmness, while PGRF had a negative effect on this parameter. The maximum values of PGRF and MEA reduced the stickiness of the pasta. Based on these results and on the parameters considered as most important, the rice pasta with the best technological characteristics was that with the maximum levels of MEA (10%) and no addition of PGRF (0%). This product was submitted to sensory and microbiological analyses, with good results.
Resumo:
Pan bread samples available in the Brazilian market were evaluated for their physicochemical and sensory characteristics. Twelve pan breads, seven white and five whole grain breads, were evaluated. Moisture, water activity (Aw), firmness, and color (L*, a*, b*) of the crumb were evaluated on the first, fourth, seventh, and tenth days after purchasing the breads. Specific volume was evaluated on the first day of analysis with averages of 4.72 and 4.70 mL/g for the white and whole grain breads, respectively. The average results on the first day of analysis were: 37.03% and 41.23% moisture, 0.954 and 0.966 Aw, 276.27 and 267.83 gf firmness, 74.73 and 64.45 L* values, 0.37 and 3.85 a* values, and 15.51 and 18.98 b* values for the white and whole grain breads, respectively. The samples showed an increase in firmness, reduction in moisture and Aw, and no color changes over time. A survey conducted prior to the acceptance test showed that the three most important factors influencing purchase were taste (19.6%), tenderness (16.8%), and expiration date of the product (14.3%). The results showed that 37.2% of the panelists preferred white bread, 62.8% preferred bread with fibers, and 82.6% would probably or definitely buy white bread with fibers.
Resumo:
The characteristics that define cake quality can be improved by the use of adequate ingredients and a correct balance of the formulation. Fat is used for its effect on softness and because it imparts flavor and calories. Enzymes such as maltogenic α-amylase can also have a positive effect on cake texture during storage by decreasing amylopectin re-crystallization and thus delaying starch retrogradation providing longer-lasting crumb softness. The objective of this study was to determine the effect of different concentrations of maltogenic α-amylase and fat on the technological and sensory characteristics of cakes. Therefore, balanced formulations with three different fat concentrations (20, 40, and 60 g/100 g, based on the flour content) were used to evaluate the addition of maltogenic α-amylase (0, 500, and 1000 mg/kg). Technological quality determinations were carried out on days 1, 7, 14, and 21 of storage. The best results in terms of cake quality (greater specific volume, higher crumb moisture content, lower crumb firmness, and greater sensory acceptance) were obtained with the combination of 20 g/100 g fat and 1000 mg/kg maltogenic α-amylase (based on the flour content), which proved to be an alternative to reduce the fat levels in the elaboration of this type of product.