Modeling of the Fluid-Structure Interaction in Inelastic Piping Systems

In many engineering applications, compliant piping systems conveying liquids are subjected to inelastic deformations due to severe pressure surges such as plastic tubes in modern water supply transmission lines and metallic pipings in nuclear power plants. In these cases the design of such systems may require an adequate modeling of the interactions between the fluid dynamics and the inelastic structural pipe motions. The reliability of the prediction of fluid-pipe behavior depends mainly on the adequacy of the constitutive equations employed in the analysis. In this paper it is proposed a systematic and general approach to consistently incorporate different kinds of inelastic behaviors of the pipe material in a fluid-structure interaction analysis. The main feature of the constitutive equations considered in this work is that a very simple numerical technique can be used for solving the coupled equations describing the dynamics of the fluid and pipe wall. Numerical examples concerning the analysis of polyethylene and stainless steel pipe networks are presented to illustrate the versatility of the proposed approach.

Entomophthoramycosis by Conidiobolus coronatus. Report of a case successfully treated with the combination of itraconazole and fluconazole

Rhinoentomophthoramycosis caused by Conidiobolus coronatus in a 61-year old woman was unsuccessfully treated during 8 years with all the antifungals available in the Brazilian market, including potassium iodide for 1 month, sulfamethoxazole plus trimethoprim for 2 months, amphotericin B, total dose of 1130 mg, cetoconazole, 400 mg/day for 6 months, fluconazole, 200 mg/day, for at least 2 months and, itraconazole, 400 mg/day for 2 months, followed by 200 mg/day for 4 more months. Complete clinical and mycological cure was achieved using itraconazol 400 mg/day in association with fluconazol 200 mg/day during 24 months. After cure she was submitted to plastic surgery to repair her facial deformation. Today she remains clinically and mycologically cured after 59/60 months (5 years!) without any specific antifungal. We thus suggest the use of the combination of itraconazole and fluconazole as an additional option for the treatment of this mycosis.

Some ultrastructural superficial changes in house fly (Diptera: Muscidae) and blow fly (Diptera: Calliphoridae) larvae induced by eucalyptol oil

The ultrastructural superficial changes in third instar house fly (Musca domestica) and blow fly (Chrysomya megacephala) induced by eucalyptol oil were observed using scanning electron microscopy. Dipped in 0.902 g/ml eucalyptol for 30 sec, the larvae integument of both species showed significant aberrant appearance of the body surface, particularly swelling integument, bleb formation, partial breach and deformation of spines.

Methodological Gaps in Left Atrial Function Assessment by 2D Speckle Tracking Echocardiography

Abstract The assessment of left atrial (LA) function is used in various cardiovascular diseases. LA plays a complementary role in cardiac performance by modulating left ventricular (LV) function. Transthoracic two-dimensional (2D) phasic volumes and Doppler echocardiography can measure LA function non‑invasively. However, evaluation of LA deformation derived from 2D speckle tracking echocardiography (STE) is a new feasible and promising approach for assessment of LA mechanics. These parameters are able to detect subclinical LA dysfunction in different pathological condition. Normal ranges for LA deformation and cut-off values to diagnose LA dysfunction with different diseases have been reported, but data are still conflicting, probably because of some methodological and technical issues. This review highlights the importance of an unique standardized technique to assess the LA phasic functions by STE, and discusses recent studies on the most important clinical applications of this technique.

Efectos del herbicida Paraquat sobre el zooplancton

The effects of 0.1; 0.2; 0.4 and 0.8 mlPQ/L were analized on a zooplankton community, to determine the most sensitive species and to analize the occurence of physical abnormalities. A total of 40 taxa were determined. Paraquat affected significantly the zooplankton density but not the species richness. A progressive state of deformation of these organisms was also observed. Paraquat showed to be highly toxic for the zooplankton, so this herbicide should be strictly regulated in aquatic and terrestrial ecosystems.

Osteological alterations in the tucuxi Sotalia fluviatilis (cetacea, delphinidae)

We present a description of osteological alterations observed in the tucuxi, Sotalia fluviatilis (Gervais, 1853) from a sample of 43 specimens. Fractures were the most frequent alterations in the sample (16%), occurring in various regions of the skeleton such as the ribs, hyoid apparatus, transverse and neural processes of vertebrae and scapula. We observed three individuals with ankylosis between the cervical vertebrae and two individuals with morphological changes (cranio-caudally elongated hemal arch and flattened cranial margin of the scapula). The only observed pathology was a case of osteomyelitis in the left dentary, which caused the loss of teeth, deformation of the associated alveoli and the formation of a medial fistula (lingual) for drainage of purulent material. This represents the first record of osteomyelitis in S. fluviatilis.

Gall midge attack intensity and host-plant response in a Neotropical coastal ecosystem

The gall inducer Clusiamyia nitida Maia, 1996 (Diptera, Cecidomyiidae) often infests the shrub Clusia lanceolata (Camb.) (Clusiaceae) in the Neotropical vegetation of restinga of Rio de Janeiro State, Brazil. Leaves of Clusia lanceolata host up to 20 spheroid galls and show variation in their shape. We aimed to evaluate the effect of gall's intensity on leaves of Clusia lanceolata, and the extension of gall's impact on adjacent non-galled leaves. We analyzed the effect of the number of galls on leaf area, biomass, specific area and leaf appearance from 509 leaves of 14 individual plants. The results showed that differences of individual plants, pairs of leaves, and gall presence were responsible for more then 90% of variation on infested leaves. Variation on parasitic intensity level created differences in leaf response. Under moderate gall attack characterized by scattered galls on a leaf, the increase of the number of galls caused an increase of leaf biomass and area, and a decrease of specific area. The specific area was smaller also under high attack intensity, characterized by coalescent galls on a leaf. In those cases of extremely high parasitic intensity, galled leaves became deformed and the surface area was severely reduced. Leaf deformation due to gall attack led to early leaf abscission, indicated by the 90% of deformed leaves found in the youngest leaf pair of the branch. There was insufficient evidence that the impact of galls on leaf morpho-physiological parameters extended beyond the attacked leaves, because ungalled leaves did not change significantly when their opposite leaf had been galled.

Comparison of estimation methods of soil strength in five soils

In agriculture, the soil strength is used to describe the susceptibility to deformation by pressure caused by agricultural machine. The purpose of this study was to compare different methods for estimating the inherent soil strength and to identify their suitability for the evaluation of load support capacity, compaction susceptibility and root growth. The physical, chemical, mineralogical and intrinsic strength properties of seven soil samples, collected from five sampling pits at different locations in Brazil, were measured. Four clay (CS) and three sandy clay loam (SCL) soils were used. The clay soils were collected on a farm in Santo Ângelo, RS (28 º 16 ' 16 '' S; 54 º 13 ' 11 '' W 290 m); A and B horizons at the Universidade Federal de Lavras, Lavras, MG (21 º 13 ' 47 '' S; 44 º 58 ' 6'' W; 918 m) and on the farm Sygenta, in Uberlandia, MG (18 º 58 ' 37 '' S; 48 º 12 ' 05 '' W 866 m). The sandy clay loam soils were collected in Aracruz, ES (19 º 47 ' 10 '' S; 40 º 16 ' 29 '' W 81 m), and on the farm Xavier, Lavras, MG (21 º 13 ' 24 '' S; 45 º 05 ' 00 '' W; 844 m). Soil strength was estimated based on measurements of: (a) a pneumatic consolidometer, (b) manual pocket (non-rotating) penetrometer; and (c) automatic (rotating) penetrometer. The results of soil strength properties were similar by the three methods. The soil structure had a significant influence on soil strength. Results of measurements with both the manual pocket and the electric penetrometer were similar, emphasizing the influence of soil texture. The data showed that, to enhance the reliability of predictions of preconsolidation pressure by penetrometers, it is better to separate the soils into the different classes, rather than analyze them jointly. It can be concluded that the consolidometer method, although expensive, is the best when evaluations of load support capacity and compaction susceptibility of soil samples are desired.

Elastic stresses and plastic deformations in 'Santa Clara' tomato fruits caused by package dependent compression

The objective of this work was to study the fruit compression behavior aiming to develop new tomato packages. Deformations caused by compression forces were observed inside packages and in individual 'Santa Clara' tomato fruit. The forces applied by a transparent acrylic lever to the fruit surface caused pericarp deformation and the flattened area was proportional to the force magnitude. The deformation was associated to the reduction in the gas volume (Vg), caused by expulsion of the air from the loculus cavity and reduction in the intercellular air volume of the pericarp. As ripening advanced, smaller fractions of the Vg reduced by the compressive force were restored after the stress was relieved. The lack of complete Vg restoration was an indication of permanent plastic deformations of the stressed cells. Vg regeneration (elastic recovery) was larger in green fruits than in the red ones. The ratio between the applied force and the flattened area (flattening pressure), which depends on cell turgidity, decreased during ripening. Fruit movements associated with its depth in the container were observed during storage in a transparent glass container (495 x 355 x 220 mm). The downward movement of the fruits was larger in the top layers because these movements seem to be driven by a summation of the deformation of many fruits in all layers.