O emprego das soluções de HCl 0,1 N de EDTA (NH4)2 CO3 e da ditizona - acetato de amônio na extração de zinco em solos de Piracicaba

Foram feitas determinações de zinco total, solúvel em HCl 0,1 N, solúvel em EDTA-(NH4) 2CO3 e solúvel em ditizona em 8 perfis de solos de 8 séries de solos do município de Piracicaba, Estado de São Paulo-Brasil. Para determinação do zinco total, solúvel em HCl 0,1 N, solúvel em EDTA(NH4/2CO3 e solúvel em ditizona, usouse o método de TRIERWEILER e LINDSAY (1968) e para a ditizona (NH4/2SO4 o método de SHAW e DEAN (1952). Foram estudadas as correlações entre as soluções extratoras de zinco e o zinco total, e o confronto entre os extratores químicos. A solução extratora de HCl 0,1 N extraiu maior quantidade de zinco do que as soluções do EDTA-carbonato de amônio e de ditizona acetato de amônio. Esta, por sua vez, na maior parte dos casos, não diferiu da solução do EDTA-carbonato de amônio. Estudo de correlações entre as soluções extratoras e o zinco total mostrou que apenas o HCl 0,1 N apresentou tal correlação. As principais conclusões foram as seguintes: 1- Os teores de zinco total para os perfis de solos situam-se entre 23 e 128 ppm de Zn. 2- As séries Bairrinho, Luiz de Queiroz e Guamium foram as mais altas em Zn total (46 a 128 ppm). 3- As séries Paredão Vermelho, Quebra Dente, Monte Olimpo e Lageadinho foram as mais baixas em zinco total (23 a 55 ppm de Zn). 4- O HCl 0,1 N extraiu mais zinco do que as soluções de EDTA- (NH4) 2CO3 e da ditizona e acetato de amônio. Entre estas duas soluções não houve diferença nos teores. 5- Os solos Luiz de Queiroz, Lageadinho e Bairrinho, foram os altos em zinco solúvel, pelas soluções extratoras.

Estudo das ligações de hidrogênio para dímeros formados pelas moléculas de H2O, NH3, HF, HCl e HBr através de cálculos baseados em primeiros princípios

Hydrogen bond energies of fifteen dimers were calculated using the large basis set 6-311++G(3df,3pd), at Hartree-Fock (HF) level including Møller-Plesset (MP2) calculations. The procedure for obtaining such energies were based on the dimer's energy rise provoked by increasing in intermolecular distance of the system component units. Deviations from a strictly linear hydrogen bond were investigated and rotational barriers were also computed allowing the calculation of the second order attractive interactions. In order to provide a more objective definition of hydrogen bond, a lower energy limit was proposed in place of the merely empirical parameters employed in the classical definition

Estudo teórico da estrutura eletrônica e da dinâmica induzida por lasers da molécula de HCl

Potential energy and dipole moment curves for the HCl molecule were computed. Calculations were performed at different levels of theory (DFT, MRCI). Spectroscopic properties are reported and compared with experimental data, for validating the theoretical approaches. Interaction of infrared radiation with HCl is simulated using the wave packet formalism. The quantum control model for population dynamics of the vibrational levels, based on pi-pulse theory, is applied. The results demonstrate that wavepackets with specific composition can be built with short infrared laser pulses and provide the basis for studies of H + HCl collision dynamics with infrared laser excitation.

Anticoccidial activity of hydrochloric acid (HCl) against Eimeria tenella in broiler chickens

The present study was planned to evaluate the anticoccidial activity of the different concentrations of the HCl against Eimeria tenella infection in broiler chickens in comparison with the amprolium anticoccidial. For this purpose, a total of 198 chicks were placed 11 per pen with three pens per treatment. The different concentrations of HCl (1000ppm, 2000ppm and 3000ppm) and amproilum (at the dose rate of 125ppm) were given to the experimental groups in drinking water from 10 to 19th days of age. One group was kept as infected non medicated control and one as non infected non medicated control. At the 12th day of age, all the groups were inoculated orally with 75,000 sporulated oocysts except non infected non medicated control. Anticoccidial activity was evaluated on the basis of performance (weight gain, feed conversion ratio) and pathogenic (oocyst score, lesion score and mortality %age) parameters. Among HCl medicated groups, the maximum anticoccidial effect was seen in the group medicated with 1000ppm HCl followed by 2000ppm and 3000ppm HCl medicated groups. Amprolium and 1000ppm HCl were almost equivalent in suppressing the negative performance and pathogenic effects associated with coccidiosis (Eimeria tenella) challenge. In summary, the lower doses of HCl have the potential to be used as alternative to chemotherapeutic drugs for Eimeria tenella control. It is therefore suggested that further studies should be carried out to determine the possible minimum safe levels of HCl with least toxic effects to be used as anticoccidial.

Availability of heavy metals in contaminated soil evidenced by chemical extractants

Heavy metals have been accumulating in Brazilian soils, due to natural processes, such as atmospheric deposition, or human industrial activities. For certain heavy metals, when in high concentrations in the soil, there is no specific extractant to determine the availability of these elements in the soil. The objective of the present study was to evaluate the availability of Cd, Cu, Fe, Mn, Pb and Zn for rice and soybeans, using different chemical extractants. In this study we used seven soil samples with different levels of contamination, in completely randomized experimental design with four replications. We determined the available concentrations of Cd, Cu, Fe, Mn, Pb and Zn extracted by Mehlich-1, HCl 0.1 mol L-1, DTPA, and organic acid extractants and the contents in rice and soybeans, which extracts were analyzed by ICP-OES. It was observed that Mehlich-1, HCl 0.1 mol L-1 and DTPA extractants were effective to assess the availability of Cd, Cu, Pb and Zn for rice and soybeans. However, the same was not observed for the organic acid extractant.

Analysis of the specificity of human antibodies to antigens of Leishmania braziliensis braziliensis

The antigenicity of promastigotes of Leishmania braziliensis braziliensis (L. b.braziliensis) treated with 1% sodium desoxycholate in 10 mM Tris-Hcl pH 8.2 was analysed by immunoblot using as probes sera from American cutaneous leishmaniasis (ACL), American visceral leishmaniasis (AVL), schistosomiasis, malaria and Chagas' disease. The ACL sera reacted constantly with a 60 kD band. No reactivity to this protein was observed with sera from the other diseases above mentioned indicating that the 60 kD protein may be used in serodiagnosis for ACL.

Evaluation of the allergenicity of spore and mycelia extracts of Pisolithus tinctorius

The antigenic and allergenic chemical analysis of spore and mycelia extracts of Pisolithus tinctorius was carried out. The spores were collected from basidiocarps in plantations of Eucalyptus spp and the mycelia from culture in MNM medium. With basis on the fungus growth curve, the mycelia masses were obtained after 10, 20, 30, and 40 days of incubation, which correspond, respectively, to the beginning, middle and end of the log phase, and beginning of the decline phase. The mycelia masses, together with the spores, were submitted to the action of three extractors (Coca, Tris-HCl, and ammonium bicarbonate). The contents of carbohydrates and proteins were determined. The SDS-PAGE electrophoretical analysis revealed separate fractions in these extracts, besides common fractions, in function of cultivation time and extraction methods. The selected extracts for the allergic tests were the ones with the highest number of fractions. The prick-tests were conducted in 374 patients – rural workers, eucalyptus plantation works and college students. The positivity to the "prick test" with the antigenic extract of P. tinctorius was, respectively, 3.78%, 28.20% and 6.40%. Most prick-test positive patients (82.75%) also presented symptoms of respiratory allergy (asthma and rhinitis). There was no reactivity difference when the spore and mycelia extracts were employed. The analysis of the positive patients’ sera revealed the presence of IgE specific to the P. tinctorius antigens. Since Pisolithus tinctorius is found as mycorrhyza of Eucalyptus spp, and this plant is used in reforestation in most countries, the importance of that fungus should be regarded as a possible cause of respiratory allergies, especially in occupationally exposed workers

MEMBRANE FRACTIONS FROM Strongyloides venezuelensis IN THE IMMUNODIAGNOSIS OF HUMAN STRONGYLOIDIASIS

Strongyloides venezuelensis is a parasitic nematode of rodents frequently used to obtain heterologous antigens for the immunological diagnosis of human strongyloidiasis. The aim of this study was to evaluate membrane fractions from S. venezuelensis for human strongyloidiasis immunodiagnosis. Soluble and membrane fractions were obtained in phosphate saline (SS and SM) and Tris-HCl (TS and TM) from filariform larvae of S. venezuelensis. Ninety-two serum samples (n = 92) were obtained from 20 strongyloidiasis patients (Group I), 32 from patients with other parasitic diseases (Group II), and 40 from healthy individuals (Group III), and were analyzed by enzyme-linked immunosorbent assay (ELISA). Soluble fractions (SS and TS) showed 90.0% sensitivity and 88.9% specificity, whereas the membrane fractions (SM and TM) showed 95.0% sensitivity and 94.4% specificity. The present results suggest the possible use of membrane fractions of S. venezuelensis as an alternative antigen for human strongyloidiasis immunodiagnosis.

IMMUNODIAGNOSIS OF HUMAN STRONGYLOIDIASIS: USE OF SIX DIFFERENT ANTIGENIC FRACTIONS FROM Strongyloides venezuelensis PARASITIC FEMALES

SUMMARY The aim of this study was to evaluate six different antigenic fractions from Strongyloides venezuelensis parasitic females for the immunodiagnosis of human strongyloidiasis. Soluble and membrane fractions from S. venezuelensis parasitic females were prepared in phosphate-buffered saline (SSF and SMF, respectively), Tris-HCl (TSF and TMF, respectively), and an alkaline buffer (ASF and AMF, respectively). Serum samples obtained from patients with strongyloidiasis or, other parasitic diseases, and healthy individuals were analyzed by enzyme-linked immunosorbent assay (ELISA). Soluble fractions SSF, TSF, and ASF showed 85.0%, 75.0%, and 80.0% sensitivity and 93.1%, 93.1%, and 87.5% specificity, respectively. Membrane fractions SMF, TMF, and AMF showed 80.0%, 75.0%, and 85.0% sensitivity, and 95.8%, 90.3%, and 91.7% specificity, respectively. In conclusion, the present results suggest that the fractions obtained from parasitic females, especially the SSF and SMF, could be used as alternative antigen sources in the serodiagnosis of human strongyloidiasis.

The use of different concentrations of leishmanial antigen in skin testing to evaluate delayed hypersensitivity in american cutaneous leishmaniasis

Three concentrations of Leishmania mexicana amazonensis sonicated whole promastigote antigen (30, 9.6 and 3 ug N in 0.1 ml) wereprepared and 0.1 ml of each inoculated intradermally intopatients who live in one endemic leishmaniasis region in Brazil. Patients were divided into groups with active cutaneous leishmaniasis (ACL), healed cutaneous leishmaniasis (HCL), mucosal leishmaniasis (ML), and Controls (C). Skin reactions were recorded by measuring induration 48 hours after inoculation. Skin tests using 9.6 ugN/0.1 mlyielded the best diagnostic resultssince 97% of 30 patients with active lesions (cutaneous or mucosal) and 83% with HCL showed reactions of 5 mm orgreater as compared with 4% Controls. Tests using 30ug N/O. 1 ml causedan unacceptable levei of skin reactions with necrosis (10% of ACL patients tested and 17% of HCL, respectively). Tests using 3 ug N/O. 1 ml were less sensitive since only 87% of patients with active lesions and 68% with HCL had reactions of 5mm orgreater. The 3 ug N/O. 1 ml dose was utilized to ask the questions whether skin delayed hypersensitivity decreased with time after the initial lesion and whether mucosal involvement is associated with enhaced hypersensitivity to leishmanial antigen. Decreased delayed hypersensitivity was noted only in those patients who had an initial lesion more than 30 years ago. The mean induration of the reaction in 10 patients with ML was 11.3 mm ± 7.15, in 41 patients with HCL, 9.27 mm ± 6.78 and in 20patients with ACL 10. 7 mm ± 6.10 mm. The percent of patients with 5 mm orgreater induration was ML 80%, HCL 71%, ACL 90%. Thus, we could not confirm an association between enhanced delayed hypersensitivity and mucosal involvement in leishmaniasis.

Estudo de metais pesados (Co, Cu, Fe, Cr, Ni, Mn, Pb e Zn) na Bacia do Tarumã-Açu Manaus (AM)

Os resíduos gerados em domicílios incluem diversos produtos, como pesticidas, produtos farmacêuticos, detergentes, óleos de cozinha, metais pesados contidos em baterias e outros utensílios. Esses resíduos são lançados continuamente em aterro sanitário ou lixões em cidades como Manaus. O chorume produzido nesses aterros, quando não tratados, contamina recursos hídricos superficiais e subterrâneos. Neste estudo foi feita uma avaliação das conseqüências da liberação do chorume no sistema hídrico da bacia do Tarumã-Açu. Amostras de água e sedimento foram coletadas nos igarapés Matrinxã, Acará, Bolívia, bacia do Tarumã-Açu e dentro do aterro sanitário (Manaus - Amazonas - Brasil) em março 2001. As amostras de água foram filtradas em filtro Milipore (0,45 mm de poro) e, em seguida, tratadas com HNO3 concentrado. As amostras de sedimento foram peneiradas em malha de 0,053 mm e digeridas com HCl:HNO3 (1:3) a 150ºC. As concentrações de alguns metais pesados (Co, Cu, Fe, Cr, Ni, Mn, Pb e Zn) foram determinadas nas amostras de água e sedimento por espectrometria de absorção atômica de chama. Os resultados revelaram que a concentração dos metais pesados é muito acima dos permitidos pela resolução 357/2005 do CONAMA em praticamente todos os locais amostrados, mostrando que o Aterro Sanitário é um dos principais responsáveis pelo impacto ambiental observado nos corpos hídricos estudados. As análises dos componentes principais (PCA) e hierárquica de cluster (HCA), revelam que os pontos de coleta localizados dentro do aterro sanitário apresentam características diferentes dos outros locais amostrados. Além disso, o HCA e PCA mostraram que existe uma similaridade entre os pontos de coleta localizados fora do aterro o que permite afirmar que o chorume do aterro se dissolve por todo corpo hídrico estudado.

Aproveitamento do Óleo das Amêndoas de Tucumã do Amazonas na Produção de Biodiesel

A falta de disponibilidade de energia elétrica é um dos principais motivos pelo baixo Índice de Desenvolvimento Humano das comunidades isoladas localizadas na Amazônia. O biodiesel produzido a partir de óleos vegetais extraídos de espécies oleaginosas nativas de forma sustentada é uma das melhores alternativas energéticas para a região. O tucumã do amazonas, Astrocaryum aculeatum, é uma espécie de palmeira que produz um fruto muito apreciado na região, a partir do qual se obtém uma amêndoa com alto teor de óleo. Nesse estudo, foi avaliada a produção de biodiesel etílico, a partir de diferentes lotes de óleos de tucumã do amazonas, com índices de acidez baixos e elevados, pela transesterificação por catálise básica e ácida homogêneas, respectivamente. Na catálise ácida, foram testados HCl e H2SO4 como catalisadores nas concentrações de 0,0625 a 1,000 M, empregando etanol hidratado na proporção molar de 1:6 e a reação conduzida a 90 ºC por 24 h. Na catálise básica, foram testados NaOH e KOH, nas proporções de 0,5 a 2,0 %, empregando etanol anidro na proporção molar de 1:12 e a reação conduzida a 80 ºC por 2 h. O biodiesel obtido em cada experimento foi analisado por métodos físicos (massa específica) e cromatográficos (CLAE em fase reversa). Análises cromatográficas indicaram que as melhores conversões foram alcançadas por amostras de biodiesel com massas específicas inferiores a 0,87 g.cm-1. As amostras de biodiesel obtidas com melhor qualidade foram obtidas utilizando-se os catalisadores ácidos a 1,0 M com rendimentos superiores a 90%. No caso da catálise básica, obteve-se biodiesel de boa qualidade empregando-se o catalisador NaOH a 2,0%, porém com rendimento inferior a 60 %. Contudo, em ambos os casos, foi possível identificar um excelente potencial de produção de biocombustível, a partir do óleo das amêndoas de tucumã.

Comparison of the effect of two HMG CoA reductase inhibitors on LDL susceptibility to oxidation

OBJECTIVE: To study the differences between fluvastatin and pravastatin regarding LDL susceptibility to oxidation, plasma levels of total cholesterol (TC), HDL-C, LDL-C and triglycerides (TG) in hypercholesterolemic patients with established coronary heart disease (CHD). METHODS: A double-blind randomized parallel study was conducted that included 41 hypercholesterolemic outpatients with CHD treated at the Instituto de Cardiologia do Rio Grande do Sul. The inclusion criteria were LDL-C above 100 mg/dL and triglycerides below 400 mg/dL based on 2 measures. After 4 weeks on a low cholesterol diet, those patients that fullfilled the inclusion criteria were randomized into 2 groups: the fluvastatin group (fluvastatin 40 mg/day) and the pravastatin group (pravastatin 20 mg/day), for 24 weeks of treatment. LDL susceptibility to oxidation was analyzed with copper-induced production of conjugated dienes (Cu2+) and water-soluble free radical initiator azo-bis (2'-2'amidinopropanil) HCl (AAPH). Spectroscopy nuclear magnetic resonance was used for determination of lipids. RESULTS: After 24 weeks of drug therapy, fluvastatin and pravastatin significantly reduced LDL susceptibility to oxidation as demonstrated by the reduced rate of oxidation (azo and Cu) and by prolonged azo-induced lag time (azo lag). The TC, LDL-C, and TG reduced significantly and HDL-C increased significantly. No differences between the drugs were observed. CONCLUSION: In hypercholesterolemic patients with CHD, both fluvastatin and pravastatin reduced LDL susceptibility to oxidation.

A separação do Cálcio de Estroncio mediante o emprego de Resina Trocadora de Íons e de Estroncio Radioativo Sr-89

O presente trabalho relata os dados obtidos na separação do estrôncio do cálcio, pelo uso de uma solução de NH4- EDTA, com pH entre os valores 4,8 e 5,3, passando através de uma coluna de resina trocadora de cátions. Assim, 200 ml de uma solução a 2,5% de NH4- EDTA com pH = 4,8 e contendo 0,36 mg de estrôncio e 199,2 mg de cálcio (o que dá uma relação de 1 de Sr para 553 de Ca) foram passados através de uma coluna de 25 a 28 ml de resina trocadora de cátions Amberlite IR - 120 (H+) prèviamente preparada. O estrôncio ficou retido na coluna e o cálcio continuou na solução que passou. Depois de passar solução de NH4- EDTA com pH 5,3 e solução de HCl de 0,25 a 0,75 N, o estrôncio foi eluido com solução 3N de HCl. Como empregou-se estrôncio radioativo Sr-89, esse ion foi determinado por radiometria, para se conhecer a eficiência da separação. O cálcio foi determinado pelo método permanganométrico em solução de NH4- EDTA após a eliminação do agente quelante. Os dados obtidos mostraram que houve uma separação muito eficiente, indicada pela porcentagem de recuperação do estrôncio qu efoi de 97,7, 97,0 e 98,6% ao passo que a recuperação do cálcio foi de 100,0, 99,9 e 99,7%.

Determinação do teor total e do teor solúvel, em diversas soluções, do cobre do solo

O presente trabalho tem por objetivo o estudo de métodos e técnicas de determinação do teor total e do teor solúvel, em diversas soluções extratoras, do cobre do solo, Foram utilizados cinco diferentes solos do Estado de São Paulo e as determinações foram feitas pelo método colorimétrico do dietilditiocarbamato de sódio (DDC-Na). Para a determinação do teor total de cobre, os extratos dos solos foram preparados através de ataque de 250 mg de solo com os ácidos HClO4 e HF, 0 teor de cobre total encontrado oscilou de 23 a 126 ppm, para os cinco solos estudados. Quanto ao teor de cobre solúvel, foram empregados como extratores, soluções de HCl 0,05 N e 0,10 N, de EDTA dissódico a 1% e de CH3COOH 0,10 N. As extrações com as soluções de HCl foram conduzidas por agitação de 2,5 e 5,0 g de solo por 50 ml de solução, com a duração de 10, 15 e 30 minutos. Os teores de cobre solubilizado oscilaram de 0,5 a 14,6 ppm, com HCl 0,10 N e de 0,3 a 10,2 ppm, com HCl 0,05 N. Os extratos em soluções de EDTA dissódico e CH3COOH foram obtidos a partir de 5,0 g de solo por 50 ml de solução, agitando também 10, 15 e 30 minutos. Os teores de cobre solubilizado variaram de 0,8 a 15,0 ppm, com solução de EDTA, e de 0,0 a 0,5 ppm, com solução de CH3COOH.