Decomposition of ground biomass of secondary forest and yield of annual crops in no tillage

ABSTRACT The objective of this work was to evaluate the dynamics of decomposition process of chopped secondary forest system, previously enriched with legumes Inga velutina Willd. and Stryphnodendron pulcherrimum (Willd.) Hochr. and the contribution of this process to the nutrient input to the cultivation of corn and bean under no-tillage. The experimental design was a randomized block, split plot with four replications. The plots were two species (I. velutina and S. pulcherrimum) and the subplots were seven times of evaluation (0, 7, 28, 63, 189, 252, 294 days after experiment installation). There was no difference (p ≥ 0.05) between the secondary forest systems enriched and no interaction with times for biomass waste, decomposition constant and half-life time. The waste of S. pulcherrimum trees had higher (p < 0.05) C/N ratio than that I. velutina. However, this one was higher (p < 0.05) in lignin content. Nevertheless, the dynamics of residue decomposition was similar. The corn yield was higher (p < 0.05) in cultivation under I.velutina waste. Meanwhile, the beans planted after corn, shows similar (p > 0.05) yield in both areas, regardless of the waste origin.

An unusual ground larval habitat of Aedes albopictus

Relata-se o encontro de criadouro de Aedes albopictus no solo. Tratou-se de buraco resultante da queda de árvore Piptadenia ("angico branco") onde foram coletadas larvas daquele mosquito, juntamente com representantes de Culex declarator, Cx. quinquefasciatus e Culex (Cux.) sp. do Grupo Coronator. O criadouro comportou cerca de 17 litros de água proveniente de chuvas locais. O achado deu-se em mata residual dentro de perímetro urbano da cidade de Pindamo-nhangaba no Vale do Paraíba, Estado de São Paulo, Brasil. Discute-se o significado do encontro como provável indicador de ecletismo comportamental e de adaptação do culicídeo ao ambiente antrópico.

Structure and composition of the ground-herb community in a terra-firme Central Amazonian forest

The herb community of tropical forests is very little known, with few studies addressing its structure quantitatively. Even with this scarce body of information, it is clear that the ground herbs are a rich group, comprising 14 to 40% of the species found in total species counts in tropical forests. The present study had the objective of increasing the knowledge about the structure and composition of the ground-herb community and to compare the sites for which there are similar studies. The study was conducted in a tropical non-inundated and evergreen forest 90 km north of Manaus, AM. Ground herbs were surveyed in 22 transects of 40 m², distributed in five plots of 4 ha. The inventoried community was composed of 35 species, distributed in 24 genera and 18 families. Angiosperms were represented by 8 families and Pteridophytes by 10 families. Marantaceae (12 sp) and Cyperaceae (4 sp) were the richest families. Marantaceae and Poaceae were the families with greatest abundance and cover. Marantaceae, Poaceae, Heliconiaceae and Pteridophytes summed 96% of total herb cover, and therefore were responsible for almost all the cover of the community. The 10 most important species had 83.7% of the individuals. In general, the most abundant species were also the most frequent. Richness per transect varied from 7 to 19 species, and abundance varied from 30 to 114 individuals. The community structure was quite similar to 3 other sites in South America and one site in Asia.

A comparative evaluation of endemic and non-endemic region of visceral leishmaniasis (Kala-azar) in India with ground survey and space technology

In visceral leishmaniasis, phlebotomine vectors are targets for control measures. Understanding the ecosystem of the vectors is a prerequisite for creating these control measures. This study endeavours to delineate the suitable locations of Phlebotomus argentipes with relation to environmental characteristics between endemic and non-endemic districts in India. A cross-sectional survey was conducted on 25 villages in each district. Environmental data were obtained through remote sensing images and vector density was measured using a CDC light trap. Simple linear regression analysis was used to measure the association between climatic parameters and vector density. Using factor analysis, the relationship between land cover classes and P. argentipes density among the villages in both districts was investigated. The results of the regression analysis indicated that indoor temperature and relative humidity are the best predictors for P. argentipes distribution. Factor analysis confirmed breeding preferences for P. argentipes by landscape element. Minimum Normalised Difference Vegetation Index, marshy land and orchard/settlement produced high loading in an endemic region, whereas water bodies and dense forest were preferred in non-endemic sites. Soil properties between the two districts were studied and indicated that soil pH and moisture content is higher in endemic sites compared to non-endemic sites. The present study should be utilised to make critical decisions for vector surveillance and controlling Kala-azar disease vectors.

Characterisation of Culex quinquefasciatus (Diptera: Culicidae) larval habitats at ground level and temporal fluctuations of larval abundance in Córdoba, Argentina

The aims of this study were to characterise the ground-level larval habitats of the mosquito Culex quinquefasciatus, to determine the relationships between habitat characteristics and larval abundance and to examine seasonal larval-stage variations in Córdoba city. Every two weeks for two years, 15 larval habitats (natural and artificial water bodies, including shallow wells, drains, retention ponds, canals and ditches) were visited and sampled for larval mosquitoes. Data regarding the water depth, temperature and pH, permanence, the presence of aquatic vegetation and the density of collected mosquito larvae were recorded. Data on the average air temperatures and accumulated precipitation during the 15 days prior to each sampling date were also obtained. Cx. quinquefasciatus larvae were collected throughout the study period and were generally most abundant in the summer season. Generalised linear mixed models indicated the average air temperature and presence of dicotyledonous aquatic vegetation as variables that served as important predictors of larval densities. Additionally, permanent breeding sites supported high larval densities. In Córdoba city and possibly in other highly populated cities at the same latitude with the same environmental conditions, control programs should focus on permanent larval habitats with aquatic vegetation during the early spring, when the Cx. quinquefasciatus population begins to increase.

Opisthorchiasis in infant remains from the medieval Zeleniy Yar burial ground of XII-XIII centuries AD

We present a paleoparasitological analysis of the medieval Zeleniy Yar burial ground of the XII-XII centuries AD located in the northern part of Western Siberia. Parasite eggs, identified as eggs of Opisthorchis felineus, were found in the samples from the pelvic area of a one year old infant buried at the site. Presence of these eggs in the soil samples from the infant’s abdomen suggests that he/she was infected with opisthorchiasis and imply consumption of undercooked fish. Ethnographic records collected among the population of the northern part of Western Siberia reveal numerous cases of feeding raw fish to their children. Zeleniy Yar case of opisthorchiasis suggests that this dietary custom has persisted from at least medieval times.

Uso de sistema GPR (Ground Penetring Radar) na avaliação de atributos de um solo sob plantio de cana-de-açúcar

O GPR utiliza técnica indireta para investigação das estruturas de subsuperfície, sendo caracterizado como método não-invasivo, o qual permite extrair informações ao longo do perfil de solo sem perfurar, sondar ou escavar. Este trabalho teve o objetivo de avaliar a utilização do GPR no estabelecimento de atributos físicos do solo em área de cultivo com cana-de-açúcar, além de estabelecer sua correlação com o método do cilindro volumétrico. A área de estudo está localizada no município de Bom Sucesso - PR, sendo utilizada com cultura da cana há mais de 20 anos. Foram obtidas amostras de solos indeformadas com cilindro volumétrico nas profundidades de 0-0,1, 0,1-0,2, 0,2-0,3, 0,3-0,4 e 0,4-0,5 m, ao longo de três transeptos paralelos, sendo o central referente à linha de plantio (transepto 2) e os outros dois correspondentes às entrelinhas laterais (transeptos 1 e 3). Os valores de densidade e porosidade total, obtidos por meio das amostras físicas, foram inicialmente interpretados para verificar o estado do solo nas linhas e nas entrelinhas de cana, nas cinco profundidades. Posteriormente, foram correlacionados com os valores das constantes dielétricas (K) adquiridos pelo georradar, porém apenas para a camada de 0,4-0,5 m, uma vez que as camadas superficiais até a profundidade de 0,4 m não puderam ser avaliadas devido às limitações técnicas do equipamento, aliadas às condições físicas e químicas do solo, que acabaram por prejudicar as reflexões. A densidade mostrou-se menor nas linhas, quando comparada às entrelinhas, para as camadas de 0-0,1 e 0,2-0,3 m. A porosidade total foi menor nas entrelinhas do que nas linhas na camada de 0-0,1 m. Os valores de K foram maiores nas linhas, onde a umidade e a porosidade total foram maiores, e menores nas entrelinhas, onde as densidades encontravam se próximas ao limite crítico. A correlação de K com a densidade e porosidade total não foi significativa. Pequenas modificações na porosidade do solo em função do aumento da densidade foram suficientes para diminuir o valor de K nas entrelinhas, devido à redução na quantidade de água nos poros. Esse fato pode ser confirmado pela correlação de K com a umidade. Assim, pode-se dizer que o georradar foi extremamente sensível à variação de umidade no solo, apresentando melhores resultados para esta variável do que para a densidade e porosidade total determinada por meio do cilindro volumétrico.

Effect of intercropping wheat with forage legumes on wheat production and ground cover

The use of winter legumes in southern Brazil is hindered by the slow growth of these species during establishment exposing soil surface to erosion. Introduction of these species along with spring wheat (Triticum aestivum L.) was studied as a means of increasing ground cover during their initial establishment period, without reducing wheat grain yield. Two experiments were conducted in nearby areas, one in each year. Birdsfoot trefoil (Lotus corniculatus L.), red clover (Trifolium pratense L.) cultivar Quiñequelli, white clover (T. repens L.), and arrowleaf clover (T. vesiculosum Savi) did not reduce cereal yield in either year. Wheat yield was reduced by intercropped red clover cultivar Kenland and by subclover (T. subterraneum L.) in the first year. No grain yield differences due to intercropping with any legume were detected in the second year, when rainfall was below normal. Intercropping with wheat showed to be a practical alternative to enhance ground cover at establishing forage legumes.

Assessment of hydrochemical quality of ground water under some urban areas within sana'a secreteriat

Groundwater from nine wells of three different districts, located at Sana'a secretariat was analyzed for hydrochemical quality assessment. Measurements of water quality parameters including pH, EC, CO3(2-), HCO3-, Cl-, NO3-, SO4(2-), Ca2+, Mg2+, Fe3+, K+, and Na+ were carried out . Classification of the groundwater samples according to Cl, SO4(2-), CO3(2-) and HCO3-, hardness (H), total dissolved solids (TDS), base-exchange, and meteoric genesis was demonstrated. Suitability of ground water samples for irrigation and industrial uses according to sodium adsorption ration (SAR), ratio of dissolved sodium (RDS), residual sodium carbonate (RSC) and saturation index (SI) was also investigated. The results of this study showed that almost all ground water samples were of good quality that makes them suitable for drinking and domestic uses. Results also indicated that even though some of the ground water samples were suitable for irrigation purposes, almost all of them were found not be good for industrial uses. Despite all drawbacks of the sewerage system built around Sana'a secretariat at the beginning of the first decade of the third millennium, the results of this study indicate that there is scope of significant improvement in Sana'a secretariat ground water quality.

Polyphenoloxidase activity in peaches after vibration

The vibration during transportation is one of the main causes of fruit damage. The actual methodologies used for damage evaluation in fruits seem to be subjective, since most of them are based on visual evaluation. In this study the effect of vibration, for one and two hours, on polyphenoloxidase (PPO) activity in peach pulp was investigated. The relation among PPO activity variation, postharvest time and resting time were also considered. Results showed that vibration affects PPO activity. However, it was not possible to correlate PPO activity variation and vibration.

Vibration analysis for Bearing outer race condition diagnostics

This paper investigates defect detection methodologies for rolling element bearings through vibration analysis. Specifically, the utility of a new signal processing scheme combining the High Frequency Resonance Technique (HFRT) and Adaptive Line Enhancer (ALE) is investigated. The accelerometer is used to acquire data for this analysis, and experimental results have been obtained for outer race defects. Results show the potential effectiveness of the signal processing technique to determine both the severity and location of a defect. The HFRT utilizes the fact that much of the energy resulting from a defect impact manifests itself in the higher resonant frequencies of a system. Demodulation of these frequency bands through use of the envelope technique is then employed to gain further insight into the nature of the defect while further increasing the signal to noise ratio. If periodic, the defect frequency is then present in the spectra of the enveloped signal. The ALE is used to enhance the envelope spectrum by reducing the broadband noise. It provides an enhanced envelope spectrum with clear peaks at the harmonics of a characteristic defect frequency. It is implemented by using a delayed version of the signal and the signal itself to decorrelate the wideband noise. This noise is then rejected by the adaptive filter that is based upon the periodic information in the signal. Results have been obtained for outer race defects. They show the effectiveness of the methodology to determine both the severity and location of a defect. In two instances, a linear relationship between signal characteristics and defect size is indicated.

Using passive techniques for vibration damping in mechanical systems

This paper examines two passive techniques for vibration reduction in mechanical systems: the first one is based on dynamic vibration absorbers (DVAs) and the second uses resonant circuit shunted (RCS) piezoceramics. Genetic algorithms are used to determine the optimal design parameters with respect to performance indexes, which are associated with the dynamical behavior of the system over selected frequency bands. The calculation of the frequency response functions (FRFs) of the composite structure (primary system + DVAs) is performed through a substructure coupling technique. A modal technique is used to determine the frequency response function of the structure containing shunted piezoceramics which are bonded to the primary structure. The use of both techniques simultaneously on the same structure is investigated. The methodology developed is illustrated by numerical applications in which the primary structure is represented by simple Euler-Bernoulli beams. However, the design aspects of vibration control devices presented in this paper can be extended to more complex structures.

Advanced ceramics: evaluation of the mechanism of stock removal and ground surface quality

The aim of this work is to evaluate the mechanism of stock removal and the ground surface quality of advanced ceramics machined by a surface grinding process using diamond grinding wheels. The analysis of the grinding performance was done regarding the cutting surface wear behavior of the grinding wheel for ceramic workpieces. The ground surface was evaluated using Scanning Electron Microscopy (SEM). As a result it can be said that the mechanism of material removal in the grinding of ceramic is largely one of brittle fracture. The increase of the h max can reduce the tangential force required by the process. Although, it results in an increase in the surface damage, reducing the mechanical properties of the ground component.

Noise and vibration damping of Fe-Cr-x alloys

The aim of the present work is to study the noise and vibration damping capacity of ferromagnetic Fe-16%Cr base alloys (before and after heat treatment) with different Al and Mo contents. The noise damping was evaluated by the level of sound emission after an impact. The vibration damping was studied using a cantilever device. In addition to these tests, the magnetic structure of the materials was also investigated by Kerr effect. It was verified that the materials can decrease noise level in the frequency range of human earring. The vibration damping is influenced by heat treatment and chemical composition of the alloy. The improvement of vibration damping after heat treatment is ascribed to the decrease of internal stresses in materials and changes in magnetic domain structures.

Chaos and Unpredictability in the Vibration of an Elasto-Plastic Beam

This contribution discusses the nonlinear dynamics of a pin-ended elasto-plastic beam with both kinematic and isotropic hardening. An iterative numerical procedure based on the operator split technique is developed in order to deal with the nonlinearities in the equations of motion. Free and forced responses for harmonic sinusoidal and square wave excitations are investigated. Numerical simulations present many interesting behaviors such as jump phenomena, sensitivity to initial conditions, chaos and transient chaos. These results indicate that there are practical problems in predicting the response of the beam even when periodic steady state response is expected.