Low cost driver device for microclimate maintenance in the pre-milking of dairy cattle

Due to the importance of the environment on animal production and thus environmental control, the study aims to build a system for monitoring and control the meteorological variables, temperature and relative humidity, low cost, which can be associated with an evaporative cooling system (ECS). The system development included all the stages of assembly, test and laboratory calibration, and later the validation of the equipment carried in the field. The validation step showed results which allowed concluding that the system can be safely used in the monitoring of these variables. The controller was efficient in management of the microclimate in the waiting corral and allowed the maintenance of the air temperature within the comfort range for dairy cattle in pre-milking with averaged 25.09 ºC during the afternoon. The equipment showed the lower cost (R$ 325.76) when compared to other middle market (R$ 450.00).

Climate governance in an international system under conservative hegemony: the role of major powers

In the last five years, climate change has been established as a central civilizational driver of our time. As a result of this development, the most diversified social processes - as well as the fields of science which study them - have had their dynamics altered. In International Relations, this double challenge could be explained as follows: 1) in empirical terms, climate change imposes a deepening of cooperation levels on the international community, considering the global common character of the atmosphere; and 2) to International Relations as a discipline, climate change demands from the scientific community a conceptual review of the categories designed to approach the development of global climate governance. The goal of this article is to discuss in both conceptual and empirical terms the structure of global climate change governance, through an exploratory research, aiming at identifying the key elements that allow understanding its dynamics. To do so, we rely on the concept of climate powers. This discussion is grounded in the following framework: we now live in an international system under conservative hegemony that is unable to properly respond to the problems of interdependence, among which - and mainly -, the climate issue.

Effects of irregular-shift work and physical activity on cardiovascular risk factors in truck drivers

OBJECTIVE: To analyze the putative effect of type of shift and its interaction with leisure-time physical activity on cardiovascular risk factors in truck drivers.METHODS: A cross-sectional study was undertaken on 57 male truck drivers working at a transportation company, of whom 31 worked irregular shifts and 26 worked on the day-shift. Participants recorded their physical activity using the International Physical Activity Questionnaire along with measurements of blood pressure, body mass index and waist-hip ratio. Participants also provided a fasting blood sample for analysis of lipid-related outcomes. Data were analyzed using a factorial model which was covariate-controlled for age, smoking, work demand, control at work and social support.RESULTS: Most of the irregular-shift and day-shift workers worked more than 8 hours per day (67.7% and 73.1%, respectively). The mean duration of experience working the irregular schedule was 15.7 years. Day-shift workers had never engaged in irregular-shift work and had been working as a truck driver for 10.8 years on average. The irregular-shift drivers had lower work demand but less control compared to day-shift drivers (p < 0.05). Moderately-active irregular-shift workers had higher systolic and diastolic arterial pressures (143.7 and 93.2 mmHg, respectively) than moderately-active day-shift workers (116 and 73.3 mmHg, respectively) (p < 0.05) as well as higher total cholesterol concentrations (232.1 and 145 mg/dl, respectively) (p = 0.01). Irrespective of their physical activity, irregular-shift drivers had higher total cholesterol and LDL-cholesterol concentrations (211.8 and 135.7 mg/dl, respectively) than day-shift workers (161.9 and 96.7 mg/dl, respectively (ANCOVA, p < 0.05).CONCLUSIONS: Truck drivers are exposed to cardiovascular risk factors due to the characteristics of the job, such as high work demand, long working hours and time in this profession, regardless of shift type or leisure-time physical activity.

Direct treatment costs of HIV/AIDS in Portugal

OBJECTIVE To analyze the direct medical costs of HIV/AIDS in Portugal from the perspective of the National Health Service. METHODS A retrospective analysis of medical records was conducted for 150 patients from five specialized centers in Portugal in 2008. Data on utilization of medical resources during 12 months and patients’ characteristics were collected. A unit cost was applied to each care component using official sources and accounting data from National Health Service hospitals. RESULTS The average cost of treatment was 14,277 €/patient/year. The main cost-driver was antiretroviral treatment (€ 9,598), followed by hospitalization costs (€ 1,323). Treatment costs increased with the severity of disease from € 11,901 (> 500 CD4 cells/µl) to € 23,351 (CD4 count ≤ 50 cells/ µl). Cost progression was mainly due to the increase in hospitalization costs, while antiretroviral treatment costs remained stable over disease stages. CONCLUSIONS The high burden related to antiretroviral treatment is counterbalanced by relatively low hospitalization costs, which, however, increase with severity of disease. The relatively modest progression of total costs highlights that alternative public health strategies that do not affect transmission of disease may only have a limited impact on expenditure, since treatment costs are largely dominated by constant antiretroviral treatment costs.

Severe coinfection of melioidosis and dengue fever in northeastern Brazil: first case report

This report focuses on a fatality involving severe dengue fever and melioidosis in a 28-year-old truck driver residing in Pacoti in northeastern Brazil. He exhibited long-term respiratory symptoms (48 days) and went through a wide-ranging clinical investigation at three hospitals, after initial clinical diagnoses of pneumonia, visceral leishmaniasis, tuberculosis, and fungal sepsis. After death, Burkholderia pseudomallei was isolated in a culture of ascitic fluid. Dengue virus type 1 was detected by polymerase chain reaction in cerebrospinal fluid (CSF); this infection was the cause of death. This description reinforces the need to consider melioidosis among the reported differential diagnoses of community-acquired infections where both melioidosis and dengue fever are endemic.

Risk Factors for Cardiovascular Disease, Metabolic Syndrome and Sleepiness in Truck Drivers

Abstract Background: Truck driver sleepiness is a primary cause of vehicle accidents. Several causes are associated with sleepiness in truck drivers. Obesity and metabolic syndrome (MetS) are associated with sleep disorders and with primary risk factors for cardiovascular diseases (CVD). We analyzed the relationship between these conditions and prevalence of sleepiness in truck drivers. Methods: We analyzed the major risk factors for CVD, anthropometric data and sleep disorders in 2228 male truck drivers from 148 road stops made by the Federal Highway Police from 2006 to 2011. Alcohol consumption, illicit drugs and overtime working hours were also analyzed. Sleepiness was assessed using the Epworth Sleepiness Scale. Results: Mean age was 43.1 ± 10.8 years. From 2006 to 2011, an increase in neck (p = 0.011) and abdominal circumference (p < 0.001), total cholesterol (p < 0.001), triglyceride plasma levels (p = 0.014), and sleepiness was observed (p < 0.001). In addition, a reduction in hypertension (39.6% to 25.9%, p < 0.001), alcohol consumption (32% to 23%, p = 0.033) and overtime hours (52.2% to 42.8%, p < 0.001) was found. Linear regression analysis showed that sleepiness correlated closely with body mass index (β = 0.19, Raj2 = 0.659, p = 0.031), abdominal circumference (β = 0.24, Raj2 = 0.826, p = 0.021), hypertension (β = -0.62, Raj2 = 0.901, p = 0.002), and triglycerides (β = 0.34, Raj2 = 0.936, p = 0.022). Linear multiple regression indicated that hypertension (p = 0.008) and abdominal circumference (p = 0.025) are independent variables for sleepiness. Conclusions: Increased prevalence of sleepiness was associated with major components of the MetS.

Larval dispersal and predation in experimental populations of Chrysomya albiceps and Cochliomyia macellaria (Diptera: Calliphoridae)

In this study we investigated the larval dispersal associated with larval predation in experimental populations of Chrysomya albiceps and Cochliomyia macellaria. Frequency distribution of sampling units (G test) in the substrate was used to evaluate variation in larval dispersal. An experimental acrylic channel (1 x 0.1 x 0.2 m) covered with wood shavings was used to observe larval dispersal prior to pupation. The acrylic channel was graduated at 0.05 m intervals, each representing a sampling unit; hence, 20 sampling units were set up. A Petri dish containing third instar larvae of single and double species was deposited at one edge of the acrylic channel allowing larvae to disperse. The number of buried pupae (0, 1, 2, …n) present in each sampling unit was recorded. For double species, the number of recovered larvae of C. albiceps was similar to the number initially released on the dish Petri. On the other hand, the number of recovered larvae of C. macellaria was significantly smaller than the initially released number. The results show that C. albiceps attacks C. macellaria larvae during the larval dispersal process. The larval distribution of C. albiceps did not differ significantly from C. macellaria in double species, but it differed significantly in single species. The larval aggregation level of C. macellaria decreased when C. albiceps was present and the larval aggregation level of C. albiceps increased when C. macellaria was present. The implications of such findings for the population dynamics of these species are discussed.

RNA polymerase I promoter and splice acceptor site recognition affect gene expression in non-pathogenic Leishmania species

Leishmania (Sauroleishmania) tarentolae has biotechnological potential for use as live vaccine against visceral leishmaniasis and as a system for the over expression of eukaryotic proteins that possess accurate post-translational modifications. For both purposes, new systems for protein expression in this non-pathogenic protozoan are necessary. The ribosomal RNA promoter proved to be a stronger transcription driver since its use yielded increased levels of recombinant protein in organisms of both genera Trypanosoma or Leishmania. We have evaluated heterologous expression systems using vectors with two different polypyrimidine tracts in the splice acceptor site by measuring a reporter gene transcribed from L. tarentolae RNA polymerase I promoter. Our data indicate that the efficiency of chloramphenicol acetyl transferase expression changed drastically with homologous or heterologous sequences, depending on the polypyrimidine tract used in the construct and differences in size and/or distance from the AG dinucleotide. In relation to the promoter sequence the reporter expression was higher in heterologous lizard-infecting species than in the homologous L. tarentolae or in the mammalian-infecting L. (Leishmania) amazonensis.

MEDICAL STUDENT IN THE FAMILY HEALTH STRATEGY ON THE FIRST YEARS OF COLLEGE: PERCEPTION OF GRADUATES

There is a lack of knowledge about the effective value of the experience gained by medical students who participate in the Family Health Strategy (Estratégia Saúde da Família (ESF)) during the early stages of their medical training. This teaching strategy is based on learning by experiencing the problems that exist in real life. This study proposed to understand the value of this teaching strategy from the viewpoint of the students who had participated, after their graduation. The method adopted was a qualitative study conducted through interviews with students who graduated in the years 2009, 2010 and 2011. The data analysis used the hermeneutic dialectic technique as its model. The graduates considered that this experience enabled them to understand the organization and functioning of the health service and the context of the daily life of the users. This experience facilitated the doctor patient relationship, the development of clinical reasoning and the bond with the user. However the students emphasized that a lack of maturity prevented them gaining a higher level of benefit from the experience. Therefore, although the structure of the course is permeated by advances and challenges, it was concluded that this experience contributed to the student's learning of certain essential elements of medical training.

O programa de gerenciamento dos resíduos laboratoriais do Depto de Química da UFPR

The Laboratory Waste Management Program of the Chemistry Department of UFPR started on 1997 and was developed to meet the requirements of co-processing in cement kiln and those of the respective regulation. The in-lab procedures for waste collection and treatment were devised taking into account their cost, simplicity and wide range of application to the various types of residues generated. The program works with a five step annual journey : 1) Waste collection and treatment, 2) Bulk Storage, 3) Licensing (for transportation and co-processing), 4) Transportation and 5) Co-processing.

Injetor multicanal com válvulas de estrangulamento para análise em fluxo

An important component for the automation of flow injection analysis (FIA) systems is the sample injection valve. A simple and inexpensive commutator with 16 pinch valves (8 normally open and 8 closed) was developed and configured as a multichannel injection valve. It is activated by a single solenoid of 3 Kgf, powered by a pulsed driver circuit, controlled by a microcomputer or a switch. FIA with spectrophometric detection of potassium dichromate solution was used for the evaluation of the new injection valve and its comparison with other valves, for sample loops of 50, 100, 200, 300 and 500 muL. The repeatability was favorable (RSD 1.0% for 15 injections at each loop volume) compared to a manual injector, an electropneumatic injector and an injector configured with three mini solenoid valves (RSD 1.1, 1.3 and 1.0%, respectively, for15 injections at each loop volume).

A reação de ciclização de prins: uma estratégia eficiente para síntese estereosseletiva de anéis tetraidropirânicos substituídos

The Prins cyclization reaction has significantly advanced in the last years as demonstrated by a number of applications described in the literature. The objective of this report is to introduce this powerful synthetic methodology to the undergraduate and graduated student, since it is rarely presented in an organic synthesis formal course. This reaction is, in some cases, the methodology of choice for the preparation of natural products or drugs that present the tetrahydropyrane moiety in their structures. In this report we show some aspects of this reaction, including mechanism, scope and limitations.

Eduardo Neves, nosso eterno mestre

Eduardo Fausto de Almeida Neves, Professor Emeritus of the Universidade Federal de São Carlos and formerly Full Professor at the Instituto de Química - Universidade de São Paulo (USP), São Paulo, Brazil, was born in November 7, 1933 in Pedra Azul, MG, and deceased in July 2, 2006 in São Carlos, SP. He graduated under supervision of Professor Paschoal Senise, pioneer of Analytical Chemistry at USP, and developed his post-doctoral work at Caltech, USA, with Professor Fred Anson. His brilliant career as teacher, scientist, supervisor and mentor resulted in a prolific science school in Analytical Chemistry, with some sixty PhDs and masters supervised by him, amplified to over four hundred in the 2nd to 4th generations (still growing), spread throughout the country and nucleating new research groups. The contents of a hundred papers reflect Prof. Eduardo's wide range of scientific interests. Passionate inclination for creative intellectual activity, rooted in profound knowledge of all branches of Chemistry, broadminded thinking, sound experimentation, generous scientific cooperation and true friendship - that's why friends, colleagues and students referred to him as "master" or "my guru".

Desenvolvimento de conjunto membrana-eletrodos para célula a combustível de metanol direto passiva

Direct methanol fuel cells (DMFCs) without external pumps or other ancillary devices for fuel and oxidant supply are known as passive DMFCs and are potential candidates to replace lithium-ion batteries in powering portable electronic devices. This paper presents the results obtained from a membrane electrode assembly (MEA) specifically designed for passive DMFCs. Appropriated electrocatalysts were prepared and the effect of their loadings was investigated. Two types of gas diffusion layers (GDL) were also tested. The influence of the methanol concentration was analyzed in each case. The best MEA performance presented a maximum power density of 11.94 mW cm-2.

Desenvolvimento de tecnologia para confecção de eletrodos e conjuntos eletrodo-membrana-eletrodo (MEA) por impressão à tela para aplicação em módulos de potência de células PEMFC

Significant functions in the Proton Exchange Membrane Fuel Cells (PEMFCs) rely on Gas Diffusion Layers (GDLs), such as control the water balance in the membrane electrode assembly (MEA), allow suitable gas permeability and porosity, etc. Aware of the GDL importance in the cell performance and its great demand in scale-up projects, the fuel cell research group at Instituto de Pesquisas Energéticas e Nucleares (IPEN) has developed a Sieve Printing method (innovative in Brazil) as a strategic solution for producing GDL and electrodes used in high power PEMFC stacks. The method has shown to be adequate to fabricate low cost electrodes, GDLs of different dimensions and to produce any amount of MEAs for power stacks.