Evolution of schistosomiasis in an hyperendemic area of the Minas Gerais state: two cross-sectional studies

Two cross-sectional studies on schistosomiasis mansoni were done in Comercinho, Minas Gerais (Brazil), at an interval of 7 years. In 1974 and 1981 feces examinations (KATO-KATZ method) were done in 89 and 90% of the population (about 1,500 inhabitants) and clinical examinations were done in 78 and 92% of the patients who excreted Schistosoma mansoni eggs in the feces, respectively. The rate of infection by S. mansoni did not change (69.9% in 1974 and 70.4% in 1981), but the geometrical mean of eggs per gram of feces (431 ± 4 and 334 ± 4, respectively) and the rate of splenomegaly (11 and 7%, respectively) decreased significantly in 1981, when compared to 1974. This reduction was observed only in the central zones of the town (zones 1-2) where the rate of dwellings with piped water increased from 17 to 44%. In the surroundings (zones 3-4), where the proportion of houses with piped water did not change significantly between 1974 (10%) and 1981 (7%), the geometrical mean of S. mansoni eggs and the rate of splenomegaly did not change either.

Epidemiology of Schistosoma mansoni infection in a low-endemic area in Brazil: clinical and nutritional characteristics

A cross-sectional case-control study designed to evaluate the role of malnutrition in the association between the intensity of Schistosoma mansoni infection and clinical schistosomiasis, was conducted in an area with both low frequency of infection and low morbidity of schistosomiasis in Brazil. Cases (256) were patients with a positive stool examination for S. mansoni; their geometrical mean number of eggs/gram of feces was 90. Controls (256) were a random sample of the negative participants paired to the cases by age, sex and length of residence in the area. The clinical signs and symptoms found to be associated with S. mansoni infection, comparing cases and controls, were blood in stools and presence of a palpable liver. A linear trend in the relative odds of these signs and symptoms with increasing levels of infection was detected. Adjusting by the level of egg excretion, the existence of an interaction between palpable liver and ethnic group (white) was suggested. No differences in the nutritional status of infected and non-infected participants were found.

Geometric morphometric differences between Panstrongylus geniculatus from field and laboratory

The finding of Panstrongylus geniculatus nymphs inside a house in northeastern Antioquia, Colombia, and the reports related to their increasing presence in homes suggest the need for surveillance methods for monitoring the invasion processes. We analyzed the morphological differences between a wild population and its laboratory descendants, using the techniques of geometric morphometry, with the idea that such differences might parallel those between sylvatic and synanthropic populations. The analyses over five generations showed differences in size but not in shape. Head size and wing size were both reduced from sylvatic to laboratory populations, but the decrease in head size occurred only up to the second generation while the decrease in wing size proceeded up to the fifth generation. In contrast, although a decrease in sexual size dimorphism has been proposed as a marker of colonization in human dwellings, we did not detect any significant loss of dimorphism between sexes of P. geniculatus over the five generations studied. We conclude that size changes may have a physiological origin in response to a change of ecotopes, but more than five generations may be required for the expression of permanent morphological markers of human dwellings colonization.

Circulating filarial antigen in the hydrocele fluid from individuals living in a bancroftian filariasis area - Recife, Brazil: detected by the monoclonal antibody Og4C3-assay

The purpose of this study was to examine the circulating filarial antigen (CFA) detected by the monoclonal antibody (mAb) Og4C3-ELISA in paired samples of serum and hydrocele fluid from 104 men with hydrocele, living in an endemic area of Wuchereria bancrofti. Nocturnal blood specimens were filtered and examined for microfilariae (MF) and ultrasound was used in order to identify the presence of adult worms (the filaria dance sign - FDS) in the lymphatic vessels of the scrotal area. Four groups were selected according to their parasitological status: group I - 71 MF- and FDS-; group II - 21 MF+ and FDS+; group III - 10 MF- and FDS+ and group IV- 2 MF+ and FDS-. CFA was identified simultaneously (fluid and serum) in 11 (15.5%), 21 (100%), 3 (30%), and 1 (50%) in groups I, II, III, and IV, respectively. In despite of high CFA+ level (antigen Og4C3) units/ml, the Geometrical Mean (GM) = 2696) in the sera of these 36/104 paired samples, when compared to the hydrocele fluid, (GM = 1079), showed a very good correlation between the CFA level in the serum and CFA level in the fluid (r = 0.731). CFA level in the serum of the 23 microfilaremics (groups II and IV) was extremely high (GM = 4189) and was correlated with MF density (r = 0.442). These findings report for the first time the potential alternative use of the hydrocele fluid to investigate CFA using the mAb Og4C3-ELISA.

Isomerismo cis-trans: de Werner aos nossos dias

In coordination chemistry the study of geometrical isomerization and reactivity of specific isomers is a topic of major importance. The preparation of specific isomers often requires considerable complexity, and it is important to acquire a sense of what is involved in studying isomerism in laboratory. If it is difficult sometimes to prepare pure isomers, it is not easier to understand the mechanisms of isomerization reactions since studies on this subject have shown conflicting results and diferent interpretations on the same system have been reported in the literature. Although cis-trans isomerism in octahedral metal complexes is a common occurrence, there are relatively few studies reporting how these isomerizations occur. This paper gives an overview on cis-trans isomerization processes and identification of these species.

Determinação da estrutura molecular do ciclooctano por métodos ab initio e difração de elétrons na fase gasosa

The determination of the molecular structure of molecules is of fundamental importance in chemistry. X-rays and electron diffraction methods constitute in important tools for the elucidation of the molecular structure of systems in the solid state and gas phase, respectively. The use of quantum mechanical molecular orbital ab initio methods offer an alternative for conformational analysis studies. Comparison between theoretical results and those obtained experimentally in the gas phase can make a significant contribution for an unambiguous determination of the geometrical parameters. In this article the determination of the molecular structure of the cyclooctane molecule by electron diffraction in the gas phase and ab initio calculations will be addressed, providing an example of a comparative analysis of theoretical and experimental predictions.

Aplicação de quitosana como suporte para a imobilização de enzimas de interesse industrial

Chitosan, poly[β-(1-4)-linked-2-amino-2-deoxy-D-glucose], is the N-deacetylated product of chitin which is a major component of arthropod and crustacean shells such as lobsters, crabs, shrimps, and cuttlefishes. In addition, chitosan has many significant biological and chemical properties such as biodegradability, biocompatibility and bioactivity as well as polycationic properties. Thus, it has been widely used in many industrial and biomedical applications including wastewater treatment, chromatographic support, carriers for controlled drug delivery and enzyme immobilization. This review is an insight into the exploitation of utilization of chitosan based-supports in different geometrical configurations on the immobilization of enzymes by different protocols for further application in biotransformation reactions.

Geometric nonlinear dynamic analysis of plates and shells using eight-node hexahedral finite elements with reduced integration

This work presents a geometric nonlinear dynamic analysis of plates and shells using eight-node hexahedral isoparametric elements. The main features of the present formulation are: (a) the element matrices are obtained using reduced integrations with hourglass control; (b) an explicit Taylor-Galerkin scheme is used to carry out the dynamic analysis, solving the corresponding equations of motion in terms of velocity components; (c) the Truesdell stress rate tensor is used; (d) the vector processor facilities existing in modern supercomputers were used. The results obtained are comparable with previous solutions in terms of accuracy and computational performance.

Model for subchannel friction factors and flow redistribution in wire-wrapped rod bundles

The fuel element of LMFBR consists of a bundle of rods wrapped with an helical wire as spacer, surrounded by an hexagonal duct. In the present work, a semi-empirical model is developed to calculate bundle average and subchannel based friction factors and flow redistribution. The obtained results were compared to experimental data and they were considered satisfactory for wide range of geometrical parameters.

Multiple scales analysis of nonlinear oscillations of a portal frame foundation for several machines

An analytical study of the nonlinear vibrations of a multiple machines portal frame foundation is presented. Two unbalanced rotating machines are considered, none of them resonant with the lower natural frequencies of the supporting structure. Their combined frequencies is set in such a way as to excite, due to nonlinear behavior of the frame, either the first anti-symmetrical mode (sway) or the first symmetrical mode. The physical and geometrical characteristics of the frame are chosen to tune the natural frequencies of these two modes into a 1:2 internal resonance. The problem is reduced to a two degrees of freedom model and its nonlinear equations of motions are derived via a Lagrangian approach. Asymptotic perturbation solutions of these equations are obtained via the Multiple Scales Method.

Constitutive laws for strong geometric non-linearity

This paper is divided into two different parts. The first one provides a brief introduction to the fractal geometry with some simple illustrations in fluid mechanics. We thought it would be helpful to introduce the reader into this relatively new approach to mechanics that has not been sufficiently explored by engineers yet. Although in fluid mechanics, mainly in problems of percolation and binary flows, the use of fractals has gained some attention, the same is not true for solid mechanics, from the best of our knowledge. The second part deals with the mechanical behavior of thin wires subjected to very large deformations. It is shown that starting to a plausible conjecture it is possible to find global constitutive equations correlating geometrical end energy variables with the fractal dimension of the solid subjected to large deformations. It is pointed out the need to complement the present proposal with experimental work.

A quality and cost approach for welding process selection

The aim of this work was to propose, apply and evaluate a methodical approach to select welding processes in a productive environment based on market requirements of Quality and Costs. A case study was used. The welds were carried out in laboratory, simulating the joint conditions of a manufacturer and using several welding processes: SMAW, GTAW, pulsed GTAW, GMAW with CO2 and Ar based shielding gases and pulsed GMAW. For Quality analysis geometrical aspects of the beads were considered and for Cost analysis, welding parameters and consumable prices. Quantitative indices were proposed and evaluated. After that, evaluation of both Quality and Costs was done, showing to be possible to select the most suitable welding process to a specific application, taking into account the market conditions of a company.

Analysis of Regular and Irregular Dynamics of a Non Ideal Gear Rattling Problem

This paper presents a study on the dynamics of the rattling problem in gearboxes under non-ideal excitation. The subject has being analyzed by a number of authors such as Karagiannis and Pfeiffer (1991), for the ideal excitation case. An interesting model of the same problem by Moon (1992) has been recently used by Souza and Caldas (1999) to detect chaotic behavior. We consider two spur gears with different diameters and gaps between the teeth. Suppose the motion of one gear to be given while the motion of the other is governed by its dynamics. In the ideal case, the driving wheel is supposed to undergo a sinusoidal motion with given constant amplitude and frequency. In this paper, we consider the motion to be a function of the system response and a limited energy source is adopted. Thus an extra degree of freedom is introduced in the problem. The equations of motion are obtained via a Lagrangian approach with some assumed characteristic torque curves. Next, extensive numerical integration is used to detect some interesting geometrical aspects of regular and irregular motions of the system response.

Numerical study of wedge supported oblique shock wave-oblique detonation wave transitions

The results of a numerical study of premixed Hydrogen-air flows ignition by an oblique shock wave (OSW) stabilized by a wedge are presented, in situations when initial and boundary conditions are such that transition between the initial OSW and an oblique detonation wave (ODW) is observed. More precisely, the objectives of the paper are: (i) to identify the different possible structures of the transition region that exist between the initial OSW and the resulting ODW and (ii) to evidence the effect on the ODW of an abrupt decrease of the wedge angle in such a way that the final part of the wedge surface becomes parallel to the initial flow. For such a geometrical configuration and for the initial and boundary conditions considered, the overdriven detonation supported by the initial wedge angle is found to relax towards a Chapman-Jouguet detonation in the region where the wedge surface is parallel to the initial flow. Computations are performed using an adaptive, unstructured grid, finite volume computer code previously developed for the sake of the computations of high speed, compressible flows of reactive gas mixtures. Physico-chemical properties are functions of the local mixture composition, temperature and pressure, and they are computed using the CHEMKIN-II subroutines.

Behavioral profiles displayed by rats in an elevated asymmetric plus-maze: effects of diazepam

When rats are exposed to unknown environments where novelty and fear-inducing characteristics are present (conflictive environments), some specific behaviors are induced and exploration is apparently modulated by fear. In our laboratory, a new type of plus-maze was designed as a model of conflictive exploration. The maze is composed of four arms with different geometrical characteristics, differing from each other by the presence or absence of walls. The degree of asymmetry was as follows: NW, no wall arm; SW, a single high wall present; HL, a low and a high wall present, and HH, two high walls present. The four arms were arranged at 90o angles and the apparatus was called the elevated asymmetric plus-maze (APM). The purpose of the present study was to assess the behavioral profile of rats exposed for a single time to the APM with or without treatment with benzodiazepine. Increasing doses of diazepam were injected intraperitoneally in several groups of male, 90-day-old Holtzman rats. Distilled water was injected in control animals. Thirty minutes after treatment all rats were exposed singly to a 5-min test in the APM. Diazepam induced a biphasic modification of exploration in the NW and SW arms. The increase in the exploration score was evident at low doses of diazepam (0.25-1.0 mg/kg body weight) and the decrease in exploration was found with the higher doses of diazepam (2.0-3.0 mg/kg body weight). Non-exploratory behaviors (permanency) were not affected by benzodiazepine treatment. In the HL arm, exploration was not modified but permanency was increased in a dose-dependent manner. In the HH arm, exploration and permanency were not affected. Results are compatible with the idea that exploration-processing mechanisms in conflictive environments are modulated by fear-processing mechanisms of the brain.