Health and psychosocial effects of flexible working hours

OBJECTIVE: To examine whether any impairments in health and social lives can be found under different kinds of flexible working hours, and whether such effects are related to specific characteristics of these working hours. METHODS: Two studies - a company based survey (N=660) and an internet survey (N=528) - have been conducted. The first one was a questionnaire study (paper and pencil) on employees working under some 'typical' kinds of different flexible working time arrangements in different companies and different occupational fields (health care, manufacturing, retail, administration, call centres). The second study was an internet-based survey, using an adaptation of the questionnaire from the first study. RESULTS: The results of both studies consistently show that high variability of working hours is associated with increased impairments in health and well-being and this is especially true if this variability is company controlled. These effects are less pronounced if variability is self-controlled; however, autonomy does not compensate the effects of variability. CONCLUSIONS: Recommendations for an appropriate design of flexible working hours should be developed in order to minimize any impairing effects on health and psychosocial well-being; these recommendations should include - besides allowing for discretion in controlling one's (flexible) working hours - that variability in flexible working hours should be kept low (or at least moderate), even if this variability is self-controlled.

Morphological and thermal analyses of flexible polyurethane foams containing commercial calcium carbonate

One filler often utilized in flexible polyurethane foams is calcium carbonate (CaCO3) because it is non-abrasiveness, non-toxicity and facilitated pigmentation. However, it is observed that the excess of commercial CaCO3 utilized in industry possibly causing permanent deformations and damaging the quality of the final product. The effect of different concentrations of commercial CaCO3, in flexible foams, was studied. Different concentrations of CaCO3 were used for the synthesis of flexible polyurethane foams, which were submitted to morphological and thermal analyses to verify the alterations provoked by the progressive introduction of this filler.

Importance of flexible bronchoscopy in decannulation of tracheostomy patients

OBJECTIVE: To evaluate the importance of flexible bronchoscopy in tracheostomy patients in the process of decannulation to assess the incidence and types of laryngotracheal injury and compare the presence of such lesions with clinical criteria used for decannulation. METHODS: We studied 51 tracheostomized patients aged between 19 and 87 years, with tracheal stent for a mean of 46 ± 28 days and with clinical criteria for decannulation. They were submitted to tracheostomy tube occlusion tolerance testfor 24 hours, and then to flexible bronchoscopy. We described and classified the diagnosed laryngotracheal changes. We compared the clinical criteria for decannulation indication with the bronchoscopy-diagnosed laryngotracheal injuries that contraindicated decannulation. We identified the factors that could interfere in decannulation and evaluated the importance of bronchoscopy as part of the process. RESULTS: Forty (80.4%) patients had laryngotracheal alterations. Of the 40 patients considered clinically fit to decannulation, eight (20%) (p = 0.0007) presented with laryngotracheal injuries at bronchoscopy that contraindicated the procedure. The most frequent laryngeal alteration was vocal cords lesion, in 15 (29%) individuals, and granuloma, the most prevalent tracheal lesion, in 14 (27.5%) patients. CONCLUSION: flexible bronchoscopy showed a large number of laryngotracheal injuries, the most frequent being the vocal cords injury in the larynx and the granuloma in the trachea, which contributed to increase the decannulation procedure safety.

Modeling and control of multibody system with flexible appendages

The objective of this work is to describe the design and the implementation of an experiment to study the dynamics and the active control of a slewing multi-link flexible structure. The experimental apparatus was designed to be representative of a flexible space structure such as a satellite with multiple flexible appendages. In this study we describe the design procedures, the analog and digital instrumentation, the analytical modeling together with model validation studies carried out through experimental modal testing and parametric system identification studies in the frequency domain. Preliminary results of a simple positional control where the sensor and the actuator are positioned physically at the same point is also described.

On the numerical simulation of machining processes

Numerical simulation of machining processes can be traced back to the early seventies when finite element models for continuous chip formation were proposed. The advent of fast computers and development of new techniques to model large plastic deformations have favoured machining simulation. Relevant aspects of finite element simulation of machining processes are discussed in this paper, such as solution methods, material models, thermo-mechanical coupling, friction models, chip separation and breakage strategies and meshing/re-meshing strategies.

Application of cutting fluids in machining processes

In the last decade a lot has been discussed about the suitability of using cutting fluid in abundance to cool and lubricate machining processes. The use of cutting fluid generally causes economy of tools and it becomes easier to keep tight tolerances and to maintain workpiece surface properties without damages. In the other hand, it brings also some problems, like fluid residuals and human diseases. Because of them some alternatives has been sought to minimise or even avoid the use of cutting fluid in machining operations. Some of these alternatives are dry cutting and cutting with minimum quantity of fluid (MQF). The main goal of this work is to discuss these tendencies. Therefore, topics like kinds and methods of applications of modern cutting fluids and what are new in this area will unavoidably be considered. MQF and dry cutting techniques, their applications and where it is not possible to apply them will also be focused. To exemplify the topics, this work will describe some of the researches been developed in two important Brazilian Universities: State University of Campinas (UNICAMP) and Federal University of Uberlândia (UFU).

Influence of duty factor on the die-sinking Electrical Discharge Machining of high-strength aluminum alloy under rough machining

The use of high-strength aluminium alloys as material for injection molding tools to produce small and medium batches of plastic products as well as prototyping molds is becoming of increasing demand by the tooling industry. These alloys are replacing the traditional use of steel in the cases above because they offer many advantages such as very high thermal conductivity associated with good corrosion and wear resistance presenting good machinability in milling and electrical discharge machining operations. Unfortunately there is little technological knowledge on the Electrical Discharge Machining (EDM) of high-strength aluminium alloys, especially about the AMP 8000 alloy. The duty factor, which means the ratio between pulse duration and pulse cycle time exerts an important role on the performance of EDM. This work has carried out an experimental study on the variation of the duty factor in order to analyze its influence on material removal rate and volumetric relative wear under roughing conditions of EDM process. The results showed that high values of duty factor are possible to be applied without bringing instability into the EDM process and with improvement of material removal rate and volumetric relative wear.

Application of the center manifold theory to the study of slewing flexible Non-ideal structures with nonlinear curvature: a case study

In this paper is Analyzed the local dynamical behavior of a slewing flexible structure considering nonlinear curvature. The dynamics of the original (nonlinear) governing equations of motion are reduced to the center manifold in the neighborhood of an equilibrium solution with the purpose of locally study the stability of the system. In this critical point, a Hopf bifurcation occurs. In this region, one can find values for the control parameter (structural damping coefficient) where the system is unstable and values where the system stability is assured (periodic motion). This local analysis of the system reduced to the center manifold assures the stable / unstable behavior of the original system around a known solution.

SUPPLY CHAIN RESILIENCE ANALYSIS: A BRAZILIAN AUTOMOTIVE CASE

Supply chain (SC) resilience and flexibility are important research topics receiving growing attention. However, the academic literature needs empirical studies on SC resilience capable of investigating the inter-organizational components of flexibility along different tiers. Therefore, this paper analyzes the main lack of flexibilities in three Brazilian automotive SCs that limit their resilience and therefore their capacity to better support and meet the demand changes in the marketplace. A multi-tier case study approach is adopted. Research findings identify lack of flexibilities in different tiers that inhibit the SC resilience as well as manufacturing and SC flexibilities that build SC resilience. The findings also highlight that the same SC may have the flexibility to be resilient for one of its products but not for another product, what sheds new lights on the academic literature. Finally, flexible SCs should be designed to increase SC resilience to cope with mishaps as significant demand changes.

O planejamento econômico no Brasil: considerações críticas

In the past thirty years, a series of plans have been developed by successive Brazilian governments in a continuing effort to maximize the nation's resources for economic and social growth. This planning history has been quantitatively rich but qualitatively poor. The disjunction has stimulated Professor Mello e Souza to address himself to the problem of national planning and to offer some criticisms of Brazilian planning experience. Though political instability has obviously been a factor promoting discontinuity, his criticisms are aimed at the attitudes and strategic concepts which have sought to link planning to national goals and administration. He criticizes the fascination with techniques and plans to the exclusion of proper diagnosis of the socio-political reality, developing instruments to coordinate and carry out objectives, and creating an administrative structure centralized enough to make national decisions and decentralized enough to perform on the basis of those decisions. Thus, fixed, quantified objectives abound while the problem of functioning mechanisms for the coordinated, rational use of resources has been left unattended. Although his interest and criticism are focused on the process and experience of national planning, he recognized variation in the level and results of Brazilian planning. National plans have failed due to faulty conception of the function of planning. Sectorial plans, save in the sector of the petroleum industry under government responsibility, ha e not succeeded in overcoming the problems of formulation and execution thereby repeating old technical errors. Planning for the private sector has a somewhat brighter history due to the use of Grupos Executivos which has enabled the planning process to transcend the formalism and tradition-bound attitudes of the regular bureaucracy. Regional planning offers two relatively successful experiences, Sudene and the strategy of the regionally oriented autarchy. Thus, planning history in Brazil is not entirely black but a certain shade of grey. The major part of the article, however, is devoted to a descriptive analysis of the national planning experience. The plans included in this analysis are: The Works and Equipment Plan (POE); The Health, Food, Transportation and Energy Plan (Salte); The Program of Goals; The Trienal Plan of Economic and Social Development; and the Plan of Governmental Economic Action (Paeg). Using these five plans for his historical experience the author sets out a series of errors of formulation and execution by which he analyzes that experience. With respect to formulation, he speaks of a lack of elaboration of programs and projects, of coordination among diverse goals, and of provision of qualified staff and techniques. He mentions the absence of the definition of resources necessary to the financing of the plan and the inadequate quantification of sectorial and national goals due to the lack of reliable statistical information. Finally, he notes the failure to coordinate the annual budget with the multi-year plans. He sees the problems of execution as beginning in the absence of coordination between the various sectors of the public administration, the failure to develop an operative system of decentralization, the absence of any system of financial and fiscal control over execution, the difficulties imposed by the system of public accounting, and the absence of an adequate program of allocation for the liberation of resources. He ends by pointing to the failure to develop and use an integrated system of political economic tools in a mode compatible with the objective of the plans. The body of the article analyzes national planning experience in Brazil using these lists of errors as rough model of criticism. Several conclusions emerge from this analysis with regard to planning in Brazil and in developing countries, in general. Plans have generally been of little avail in Brazil because of the lack of a continuous, bureaucratized (in the Weberian sense) planning organization set in an instrumentally suitable administrative structure and based on thorough diagnoses of socio-economic conditions and problems. Plans have become the justification for planning. Planning has come to be conceived as a rational method of orienting the process of decisions through the establishment of a precise and quantified relation between means and ends. But this conception has led to a planning history rimmed with frustration, and failure, because of its rigidity in the face of flexible and changing reality. Rather, he suggests a conception of planning which understands it "as a rational process of formulating decisions about the policy, economy, and society whose only demand is that of managing the instrumentarium in a harmonious and integrated form in order to reach explicit, but not quantified ends". He calls this "planning without plans": the establishment of broad-scale tendencies through diagnosis whose implementation is carried out through an adjustable, coherent instrumentarium of political-economic tools. Administration according to a plan of multiple, integrated goals is a sound procedure if the nation's administrative machinery contains the technical development needed to control the multiple variables linked to any situation of socio-economic change. Brazil does not possess this level of refinement and any strategy of planning relevant to its problems must recognize this. The reforms which have been attempted fail to make this recognition as is true of the conception of planning informing the Brazilian experience. Therefore, unworkable plans, ill-diagnosed with little or no supportive instrumentarium or flexibility have been Brazil's legacy. This legacy seems likely to continue until the conception of planning comes to live in the reality of Brazil.