Degradação de corantes têxteis e remediação de resíduos de tingimento por processos Fenton, foto-Fenton e eletro-Fenton

In this work the degradation of textile dyes were evaluated, using Fenton, photo-Fenton and electro-Fenton processes. Under optimized conditions Fenton and photo-Fenton processes showed high decolorization capacity of the model dyes. The electro-Fenton process was carried out in an undivided electrochemical reactor (1000 mL) equipped with a carbon-felt cathode (253 cm²) and a platinum gauze anode (6 cm²). Under optimal conditions (J: 1.6 mA cm-2, Na2SO4: 0.075 mol L-1, pH: 3) H2O2 concentration of about 60 mg L-1 was observed. The addition of Fe2+ (15 mg L-1) induces Fenton reactions that permit almost total decolorization of textile dyes.

Evaluation of the enzyme-linked-immuno-electro-diffusion-assay (ELIEDA) for the diagnosis of Schistosoma mansoni infection with low worm burden

An immunoprecipitation technique, ELIEDA (enzyme-linked-immuno-electro-diffusion assay), was evaluated for the diagnosis of Schistosoma mansoni infection with low worm burden. One hundred of serum samples from patients excreting less than 600 eggs per gram of feces (epg), with unrelated diseases and clinically healthy subjects were studied. In patients with egg counts higher than 200 epg, the sensitivities of IgM and IgG ELIEDA were 1.000 and 0.923, respectively, not differing from other Serologic techniques, such as indirect hemaglutination (IHAT), immunofluorescence (IFT) tests and immuno-electrodiffusion assay (IEDA). However in patients with low egg counts (< 100 epg), the IgG ELIEDA provided better results (0.821) than IgM ELIEDA (0.679), showing sensitivity that did not differ from that of IgG IFT (0.929), but lower than that of IgM IFT (0.964). However, its sensivity was higher than that found with IHAT (0.607) and IEDA (0.536). The specificity of IgG ELIEDA was comparable to that of other techniques. The data indicate that IgG ELIEDA might be useful for the diagnosis of slight S. mansoni infections, and the cellulose acetate membrane strips can be stored for further retrospective studies.

Remediação de um solo contaminado com petróleo por oxidação química

A remediação de uma amostra de Latossolo Vermelho-Amarelo contaminado artificialmente com petróleo (5.000 mg kg-1) foi estudada comparando diferentes oxidantes químicos: KMnO4 0,10 mol L-1; K2S2O8 0,10 mol L-1; H2O2 0,10 mol L-1; H2O2/Fe2+ 0,10/0,080 mol L-1 (reação de Fenton); e H2O2/Fe2+/UV 0,10/0,080 mol L-1 (reação de foto-Fenton). A remediação foi praticamente completa aos 30 min para o processo de foto-Fenton (99 %). Todos os outros oxidantes não atingiram essa taxa de dissipação até 180 min. O processo em que se usou H2O2 0,10 mol L-1 (70,51 %) foi o de menor eficiência. A adição de íons Fe aumentou a taxa de dissipação para 86,98 % (H2O2/Fe2+ 0,10/0,080 mol L-1). Os métodos convencionais apresentaram taxas de dissipação de 76,58 % (KMnO4 0,10 mol L-1) e 93,85 % (K2S2O8 0,10 mol L-1).

Remediação de efluentes derivados da indústria de papel e celulose: tratamento biológico e fotocatalítico

The contribution of the industrial activities to the environmental contamination phenomena is evident. Great efforts are dedicated to the establishment of methodologies which permits an adequate treatment of the produced effluents, as a manner of minimizing the environmental impact of these wastes. The methodologies based on photocatalytic processes are very promise alternatives, because permits degradation of a great number of chemical substances of high toxic potential, without the use of other chemicals. The present work is an overview about the principal environmental aspects related with the paper and cellulose industry and the main alternatives employed for the reduction of environmental impact produced for its residues. The principal results of the photocatalytic treatment of this kind of effluents using metallic semiconductors is also showed.

Contaminação de águas por BTXs e processos utilizados na remediação de sítios contaminados

After decades of polluting actions the environment manifests serious and global consequences. The contamination of soils and groundwater by organic compounds is a widespread problem mainly on account of contamination by leakage from underground storage tanks, which often results in the release of gasoline or other chemicals. The main problem about groundwater contamination is due to the toxicity of water-soluble components such as benzene, toluene and xylene (BTX). In the present work a study about classical and modern methods for remediation of BTX is reported.

Remediação de drenagem ácida de mina usando zeólitas sintetizadas a partir de cinzas leves de carvão

Zeolitic material was synthesized from coal fly ashes (baghouse filter fly ash and cyclone filter fly ash) by hydrothermal alkaline activation. The potential application of the zeolitic product for decontamination of waters from acid mine drainage was evaluated. The results showed that a dose of 30 g L-1 of zeolitic material allowed the water to reach acceptable quality levels after treatment. Both precipitation and cation-exchange processes accounted for the reduction in the pollutant concentration in the treated waters.

Avaliação do potencial de processos oxidativos avançados para remediação de águas contaminadas com geosmina e 2-MIB

In this work, the efficiency of some homogeneous advanced oxidation processes (UVC/H2O2, Fe2+/H2O2, UVC/Fe2+/H2O2, UVA/Fe2+/H2O2, solar/Fe2+/H2O2) was investigated toward the degradation of geosmin and 2-methylisoborneol (2-MIB). The effect of relevant experimental parameters (ie. pH, Fe2+ and H2O2 concentration) was first investigated by factorial design, using camphor as a model substrate. In the geosmin and 2-MIB degradation studies the Fenton processes assisted by solar and UVA radiation offered the most promising results, mainly on account of high degradation capacity (higher than 80% at a reaction time of 60 min), high operational simplicity and low cost.

Estudo do comportamento do chumbo em latossolos brasileiros tratados com fosfatos: contribuições para a remediação de sítios contaminados

Phosphates have been used for lead immobilization in soils but the influence of soil type is not fully understood. In this work, lead chemical behaviour in two Brazilian latosoils (LA and LV) was studied via treatment with phosphates. The Pb concentration in Toxicity Characteristic Leaching Procedure (TCLP) solutions was decreased in all treatments. After treatment with H3PO4 the Pb concentration in the LA remained within the regulatory limit established by EPA. The ecotoxicological results with Daphnia pulex showed that this treatment reduced the lead bioavailability. Sequential extraction analyses showed that the lead was transferred from the most available to the residual fraction. Relevant decrease of soluble lead was observed in all phosphate treatments.

Degradação de espécies nitroaromáticas e remediação de efluentes da indústria de explosivos, utilizando-se processos redutivos-oxidativos fundamentados no uso de ferro metálico

In this work the potentiality of reductive-oxidative processes based on zero-valent iron was studied aiming the degradation of nitroaromatic compounds and the remediation of residues from the explosive industry. The reductive process was applied as a continuous treatment system, using steel-wool as zero-valent iron source. The process permitted an almost total degradation of nitrobenzene, nitrophenol, nitrotoluene, dinitrotoluene and trinitrotoluene, probably with generation of the respective amine-derivative. The yellow-water residue, containing soluble trinitrotoluene, was notably modified by the reductive process, a fact that permitted a substantial enhancement of its biodegradability. Furthermore, the subsequent photo-Fenton process allowed TOC removal of about 80%.

Avaliação da potencialidade de processos pseudo-fenton para remediação de solos contaminados por diesel

The use of the Fenton's reagent process has been investigated for the remediation of a Brazilian soil contaminated by diesel. Laboratory experiments were conducted in batch experiments. Slurries, consisting of 10 g of diesel-contaminated soil and 30 mL of Fenton's Reagent (0.41 mol L-1 H(2)0(2) and 0.18 mol L-1 FeSO4). The experiments were monitored during 24, 48 and 72 h. The efficiency of the Fenton treatment was dependent on the time of contact between soil and Fenton's reagents and matrix characteristics, probably iron content. Data suggested that no iron addition is needed for the application of Fenton-like treatment for the remediation of diesel-contaminated iron rich soils after 72 h reaction.

Effect of temperature on the electro-oxidation of ethanol on platinum

We present in this work an experimental investigation of the effect of temperature (from 25 to 180 ºC) in the electro-oxidation of ethanol on platinum in two different phosphoric acid concentrations. We observed that the onset potential for ethanol electro-oxidation shifts to lower values and the reaction rates increase as temperature is increased for both electrolytes. The results were rationalized in terms of the effect of temperature on the adsorption of reaction intermediates, poisons, and anions. The formation of oxygenated species at high potentials, mainly in the more diluted electrolyte, also contributes to increase the electro-oxidation reaction rate.

Uso de reações de fenton na remediação de solo contaminado com p,p´ DDT

Neste trabalho foram estudados dois sistemas utilizando reações de Fenton para a remediação de um solo contaminado com p,p´ DDT. O primeiro envolveu a formação de uma lama com o solo contaminado, na qual foram adicionados os reagentes de Fenton. No segundo, não houve a formação de lama e os reagentes foram adicionados diretamente ao solo por meio de um "tubo injetor". Foram avaliados alguns parâmetros que podem influenciar a reação de Fenton, tais como minerais de ferro naturalmente presentes no solo e a irradiação solar. A principal espécie mineral de ferro encontrada no solo é a hematita (Fe2O3), que teve pouca influência na degradação do contaminante. Nos experimentos com lama sem adição de ferro solúvel a porcentagem de degradação do p,p´ DDT foi inferior a 25% após 24 horas de reação. Nos ensaios com lama na presença de ferro solúvel, a degradação do p,p´ DDT atingiu 70% em 32 horas, enquanto que nos experimentos sem lama, a porcentagem de degradação foi de 32% no mesmo intervalo de tempo. Em ambos os sistemas, a irradiação solar teve pouca influência na degradação do contaminante. Os resultados indicam que para um processo de remediação deste solo, há necessidade de adição de ferro solúvel e que o sistema em lama resulta em maior eficiência de degradação de p,p´ DDT.

Harmonical oscillator and electro-mechanical analogy: an interdiscinary experiment to high precision mass variation measurements

In general, the traditional Physics courses needs examples of the aplications of the Physics concepts in other areas such as Chemistry and Biology. This lacks tend to demotivate Chemistry and Biology students regarding to deal with Physical concepts developed in classroom. In this work, the analogy among mechanic and electric oscillators is investigated to be applied in Chemistry and Biology areas, showing to be valuable due to its aplication in techniques that aims to measure mass variation with high precision. This measure could be made in a direct or indirect way. These techniques are known as electrogravimetric techniques and they are important in biosensor aplications. Thus, this paper explores the electromechanic analogy in an interdisciplinary way involving areas like Physics, Chemistry and Biology. Based on this analogy, it is proposed an experiment that can be applied in different ways, i.e. by an basic approach or more deeper, depending on the students specific formation, in other words, Physics, Chemistry or Biology.

Ação dos meios reativos peróxido de hidrogênio e carvão ativado na remediação de solos contaminados por BTEX

Esta pesquisa teve como objetivo avaliar o potencial das barreiras reativas permeáveis (BRP) na redução dos hidrocarbonetos aromáticos BTEX (Benzeno, Tolueno, Etilbenzeno e Xilenos) no solo, provenientes de vazamento de gasolina. O experimento foi conduzido em escala laboratorial, simulando dois tipos de BRP, denominadas de AS (H2O2 + solo) e de ACA (H2O2 + carvão ativado). Foram determinadas as concentrações dos BTEX na amostra da gasolina ao entrar na BRP e no percolado, em tempos de retenção preestabelecidos de 24; 36; 48; 60; 72 e 84 h, utilizando cromatografia gasosa. Os resultados obtidos mostraram que as duas barreiras reativas reduziram a concentração dos BTEX, próximo a níveis permissíveis de contaminação e de prevenção, e a barreira ACA apresentou os melhores resultados.

Escape in a nonideal electro-mechanical system

In this work a particular system is investigated consisting of a pendulum whose point of support is vibrated along a horizontal guide by a two bar linkage driven from a DC motor, considered as a limited power source. This system is nonideal since the oscillatory motion of the pendulum influences the speed of the motor and vice-versa, reflecting in a more complicated dynamical process. This work comprises the investigation of the phenomena that appear when the frequency of the pendulum draws near a secondary resonance region, due to the existing nonlinear interactions in the system. Also in this domain due to the power limitation of the motor, the frequency of the pendulum can be captured at resonance modifying completely the final response of the system. This behavior is known as Sommerfeld effect and it will be studied here for a nonlinear system.