Participación de los gobiernos regionales en la definición de políticas públicas en Chile: el caso del gobierno regional de Los Lagos y la política nacional de acuicultura

El artículo aporta evidencia respecto de la participación de los gobiernos regionales en la definición de políticas públicas en Chile a través del caso del gobierno regional de Los Lagos. Se evalúa la participación de los principales actores regionales en la definición de políticas públicas como indicador del grado de centralización en el diseño político institucional en Chile. La metodología utilizada fue el análisis documental relacionado con el caso presentado, el conocimiento del estado del arte respecto del análisis de políticas públicas como disciplina y la descentralización, posteriormente se contrastaron las hipótesis que guiaron el estudio a través del análisis de discurso aplicado a las entrevistas de los actores que estuvieron involucrados en la definición de la Política Nacional de Acuicultura.

Participación social y calidad en los servicios de salud: la experiencia del aval ciudadano en México

OBJETIVO: Analizar la experiencia del aval ciudadano en el sistema de salud mexicano en la mejora de los servicios de salud. METODOS: Estudio de corte cualitativo en ocho estados de México en 2008. Se evaluaron diferentes aspectos del programa nacional para mejorar la calidad de los servicios de salud. Se compara la estrategia de México con otras experiencias en América Latina. RESULTADOS: Se exponen los avances y problemas del funcionamiento del aval ciudadano, figura que promueve la participación social en salud de la población. CONCLUSIONES: El aval ciudadano es una figura con gran potencial para representar a los usuarios en los servicios de salud y transmitir sus demandas de mejora de la calidad de la atención médica.

Participación comunitaria y tecnología en el diagnóstico precoz de la hidatidosis humana

La estrategia básica para el desarrollo de programas de lucha contra la hidatidosis es en la actualidad la de atención primaria de la salud. En el presente trabajo, y en ese marco, se instrumenta un sistema de detección precoz de la hidatidosis basado en el diagnóstico inmunológico mediante la técnica de Elisa, a partir de muestras de sangre capilar tomadas en papel de filtro por maestras y agentes sanitarios de los servicios oficiales de la provincia de Rio Negro. Fueron entrenadas 177 maestras y 45 agentes sanitarios correspondientes a 25 escuelas, 3 albergues y 9 hospitales, todos del medio rural. Se obtuvieron 890 muestras de sangre durante el entrenamiento. Posteriormente el personal entrenado instrumentó el sistema obteniendo 728 muestras al inicio del programa. No hubo diferencias estadísticas en la reactividad de ambas muestras. La prevalencia serológica hallada fue del 1.32%. La actividad desplegada por maestras y agentes sanitarios permitió detectar 21 casos nuevos, lo cual constituyó el 20% de los casos nuevos diagnosticados en el área en el período de trabajo. Se discute la viabilidad y la importancia de la incorporación de efectores no tradicionales en los Programas de Control de la Hidatidosis.

Geração e controle das cores luz primárias em vidros para dispositivos "full color"

We are working in a new multi-doped glassy material to generate simultaneously the three primary light color (by addition) of the visible spectrum, with the control of the intensity of each one, allowing the simulation of any color: a full-color generator device. Tm+3, Tb+3 and Eu+3 ions were used (0.01 to 5,0 mol%) as blue, green and red narrow line emitters. A wide color gamut was obtained under ultraviolet excitation by varying the material composition. The chromaticity diagram is covered, including the white simulation.

Dispositivos poliméricos eletroluminescentes

Here we present an overview of electroluminescent devices that use conjugated polymers as the active media. The principal components of the devices are described and we show some examples of conjugated polymers and copolymers usually employed in polymeric light emitting devices (PLED). Some aspects of the photo and electroluminescence properties as well as of the energy transfer processes are discussed. As an example, we present some of the photophysical properties of poly(fluorene)s, a class of conjugated polymers with blue emission.

Reator de UV-Ozônio com lâmpada a vapor de mercúrio a alta pressão modificada para tratamento superficial de óxidos transparentes condutivos utilizados em dispositivos poliméricos eletroluminescentes

An UV-Ozone reactor was developed with an ignition tube extracted into HID mercury lamp used to irradiation on zinc oxide (ZnO) and fluorinated tin oxide (FTO) films for PLEDs devices. Different exposures times were used. In contact angle measurements revealed better results for ZnO and FTO by 15 and 5 min, respectively. In Diffuse Reflectance Infra-red Fourier Transformed (DRIFT) spectroscopy allowed the observation of water, hydrocarbon and carbon dioxide adsorbed on the untreated TCO surfaces. After the UV-Ozone treatment the contaminants were significantly reduced or eliminated and the PLEDs devices decreased threshold voltages in comparison with respectively untreated TCOs.

Influência de diferentes solventes utilizados na deposição de filme de poli(9-vinilcarbazol) em dispositivos OLEDs

This work studies the influence of the film deposition process on light emission performance and on threshold voltage of OLEDs, with architecture glass/ITO/PEDOT:PSS/PVK/Alq3/Al. The commercial PVK was dissolved in different solvents such as: chloroform, tetrahydrofuran, 1,2,4-trichlorobenzene and trimethylpentane. OLEDs were characterized by current-voltage and revealed a significant influence of the solvents, although all devices emitted green electroluminescence. A difference in threshold voltage up to 10 V was observed among OLEDs prepared from different solvents. The 1,2,4-trichlorobenzene showed best performance, presenting lowest treshold voltage (≈ 6 V), followed by tetrahydrofuran (≈ 8 V), trimethylpentane (≈ 14 V) and chloroform (≈ 16 V).

Máscaras mecânicas de sombra por eletrocorrosão para dispositivos eletro-ópticos

Shadow masks are used in manufacturing processes for electro-optic devices to transfer patterns with different shapes and dimensions. For fabrication of organic based devices, shadow masks should be made of materials stable against organic solvents, high temperature, and robust, remaining unchanged after multiple cycles of use and fixation. Thus, stainless steel is suitable for shadow masks. A simple, cheap and quick method of obtaining shadow masks by electrochemical corrosion of stainless steel is reported. The shadow mask was used to evaporate cathode material to obtain an organic light emitting diode with active area of 9 mm². This device exhibited a turn-on voltage of 5 V and luminance of 14 cd/m².

Avaliação de dispositivos de captura de imagens digitais para detecção colorimétrica em microzonas impressas

This report describes a study about the feasibility of using a conventional digital camera, a cell-phone camera, an optical microscope, and a scanner as digital image capture devices on printed microzones. An array containing nine circular zones was drawn using graphics software and printed onto transparency film by a laser printer. Due to its superior analytical performance, the scanner was chosen for the quantitative determination of Fe2+ in pharmaceutical samples. The data achieved using scanned images did not differ statistically from those attained by the reference spectrophotometric method at the confidence level of 0.05.

DISPOSITIVOS DGT MODIFICADOS COM MATERIAIS ALTERNATIVOS PARA USO NA ESPECIAÇÃO DE ELEMENTOS TRAÇO

The use of MT-K10 Montmorillonite immobilized onto agarose was investigated in this work as an alternative binding phase in Diffusive Gradient in Thin Film (DGT) devices for the determination of metallic labile species. In addition, agarose itself was also used as the diffusive phase. The percentage of sorption of Zn2+, Cu2+, Cr3+, Mn2+, Cd2+, Pb2+, and Ni2+ onto the binding phase was higher than 80% and the desorption process for all elements was also greater than 75%. Elution factors were determined experimentally, ranging from 0.74 for Zn2+ and 0.90 for Cr3+ and Pb2+. The accumulation of all species was linear with time, in agreement with the Fick's 1st law of diffusion. The deployment of the alternative devices in natural waters was compared to commercial devices. Labile concentrations determined by the alternative devices were slightly superior compared to results obtained with the deployment of original DGT devices due to the less restrictive pores of agarose.