Productivity of irrigated beans due to sources of stabilized nitrogen fertilizer and controlled release

ABSTRACT New nitrogen fertilizers are available in the market actually, however, does not have results on the efficiency of the Cerrado conditions. With that objective of this study was to evaluate the effect of urea including stabilized and controlled release urea on yield of irrigated common beans (Phaseolus vulgaris L) in no-tillage system. The experiment was conducted in the winter crop, at Embrapa Arroz e Feijão, in Santo Antônio de Goiás, State of Goiás, Brazil. The experimental design was randomized blocks, with five replicates. Treatments consisted of five N sources (urea, urea + NBPT, urea + polymer, ammonium sulphate, and ammonium nitrate) and a control (without N) being applied 20 kg ha-1 of N at sowing and 80 kg ha-1 onf N in topdressing. We evaluated the chlorophyll content in leaves of common beans, the leaf N content and dry mass weight (MSPA) in the flowering of common beans, the number of pods per plant, number of grains per pod, mass of 100 grains, grain yield and final stand of the common beans. The sources of nitrogen fertilizer did not influence, leaf N content, the mass of MSPA and the relative chlorophyll index of common beans. The use of polymerized urea and urea with urease inhibitor, did not produce increases in the number of grains per pod, number of pods per plant, mass of 100 grains and common beans yield compared to traditional sources of N, urea, ammonium sulfate and ammonium nitrate.

Safety and tolerability of controlled-release oxycodone on postoperative pain in patients submitted to the oncologic head and neck surgery

Objective: To evaluate the safety and tolerability of controlled-release oxycodone in the treatment of postoperative pain of head and neck oncologic resections.Methods: We conducted a prospective, observational and open study, with 83 patients with moderate to severe pain after head and neck oncological operations. All patients received general anesthesia with propofol, fentanyl and sevoflurane. Postoperatively, should they have moderate or severe pain, we began controlled-release oxycodone 20 mg 12/12 b.i.d on the first day and 10 mg b.i.d. on the second. We assessed the frequency and intensity of adverse effects, the intensity of postoperative pain by a verbal numeric scale and the use of rescue analgesia from 12 hours after administration of the drug and between 7 and 13 days after the last oxycodone dose.Results: The most common adverse events were nausea, vomiting, dizziness, pruritus, insomnia, constipation and urinary retention, most mild. No serious adverse events occurred. In less than 12 hours after the use of oxycodone, there was a significant decrease in the intensity of postoperative pain, which remained until the end of the study. The rescue medication was requested at a higher frequency when the opioid dose was reduced, or after its suspension.Conclusion: Controlled release oxycodone showed to be safe and well tolerated and caused a significant decrease in post-operative pain.

Poly-DL-lactide-co-glycolide microspheres as a controlled release antigen delivery system

Successful vaccine application means maximum protection with minimal number of administrations. A rational development of vaccines involves studies of the nature of the antigen as well as of the adjuvant to be used to improve the immune responses. This has provided the impetus for studies to design the degradable devices and for different approaches to antigen delivery by different routes of administration. The development of controlled release systems based on polymeric devices that permit a sustained or pulsed release of encapsulated antigens has attracted much interest. Polymeric delivery systems consist of polymers that release their content continuously in a controlled manner over a period of time. The development of a biocompatible delivery system for parenteral administration offers several advantages in terms of immunoadjuvanticity over other compounds. It was found that, in contrast to other carriers, microspheres are more stable, thus permitting administration by the oral or parenteral route. In the present study, we describe the main characteristics and potentialities of this new immunoadjuvant for oral and parenteral administration.

Etofibrate but not controlled-release niacin decreases LDL cholesterol and lipoprotein (a) in type IIb dyslipidemic subjects

Etofibrate is a hybrid drug which combines niacin with clofibrate. After contact with plasma hydrolases, both constituents are gradually released in a controlled-release manner. In this study, we compared the effects of etofibrate and controlled-release niacin on lipid profile and plasma lipoprotein (a) (Lp(a)) levels of patients with triglyceride levels of 200 to 400 mg/dl, total cholesterol above 240 mg/dl and Lp(a) above 40 mg/dl. These patients were randomly assigned to a double-blind 16-week treatment period with etofibrate (500 mg twice daily, N = 14) or niacin (500 mg twice daily, N = 11). In both treatment groups total cholesterol, VLDL cholesterol and triglycerides were equally reduced and high-density lipoprotein cholesterol was increased. Etofibrate, but not niacin, reduced Lp(a) by 26% and low-density lipoprotein (LDL) cholesterol by 23%. The hybrid compound etofibrate produced a more effective reduction in plasma LDL cholesterol and Lp(a) levels than controlled-release niacin in type IIb dyslipidemic subjects.

A fluorescence-based assay for octreotide in kinetic release from depot formulations

Here we report the validation of a derivatization method that makes use of fluorescamine as a selective reactant for the quantitative analysis of peptide and protein drugs in the dissolution profile from depot formulations. Typical current methods require separation of the nano/microparticles and time-consuming chromatographic runs. In this study we report a method which can be conducted without the need for complete physical separation of the particles or removal of the unreacted probe. This method was used here for the analysis of the release profile of octreotide in a depot formulation, with results in excellent agreement with reported chromatographic assays.

Microparticles obtained by complex coacervation: influence of the type of reticulation and the drying process on the release of the core material

Microparticles obtained by complex coacervation were crosslinked with glutaraldehyde or with transglutaminase and dried using freeze drying or spray drying. Moist samples presented Encapsulation Efficiency (%EE) higher than 96%. The mean diameters ranged from 43.7 ± 3.4 to 96.4 ± 10.3 µm for moist samples, from 38.1 ± 5.36 to 65.2 ± 16.1 µm for dried samples, and from 62.5 ± 7.5 to 106.9 ± 26.1 µm for rehydrated microparticles. The integrity of the particles without crosslinking was maintained when freeze drying was used. After spray drying, only crosslinked samples were able to maintain the wall integrity. Microparticles had a round shape and in the case of dried samples rugged walls apparently without cracks were observed. Core distribution inside the particles was multinuclear and homogeneous and core release was evaluated using anhydrous ethanol. Moist particles crosslinked with glutaraldehyde at the concentration of 1.0 mM.g-1 protein (ptn), were more efficient with respect to the core retention compared to 0.1 mM.g-1 ptn or those crosslinked with transglutaminase (10 U.g-1 ptn). The drying processes had a strong influence on the core release profile reducing the amount released to all dry samples

The snail hosts of schistosomiasis: some evolutionary and ecological perspectives in relation to control

Despite opportunities for radiation provided by spatio-temporal isolation, the basic morphological plan of pulmonate snails has remained conservative. In consequence of the resulting dearth of morphological characters and their plasticity, there is a case for using biochemical characters such as exogenous chemicals released by the snails (e.g. amino acids) and their chemoreception niche as taxonomic aids to classify snails of medical importance. As these same chemicals are used by snails to distinguish conspecifics they could also be used as "environmental antibodies" in controlled release formulations (CRF's) designed to remove target snails in a specific, cost-effective and ecologically acceptable manner. The snails, surface-living bacteria, algae and macrophytic plants are considered as co-evolved, interactive modular systems with strong mutualistic elements. Recently, anthropogenic perturbations such as deforestation, and damming of flowing waters, have benefited these modules whereas others such as river canalization, acid deposition, accumulation of pesticide residues and eutrophication have harmed them. Research is needed to elucidate the factors which limit the growth of snails in primitive habitats, uninfluenced by man, as well as in those subject to harmful anthropogenic factors. The understanding thus gained could be applied to develop cost-effective primary health care strategies to reduce or prevent transmission of schistosomiasis and other water related diseases.

Effects of Bayluscide WP 70® on the Survival and Water-leaving Behaviour of Biomphalaria straminea, Snail Host of Schistosomiasis in Northeast Brazil

The toxic and behavioural effects of niclosamide (Bayluscide WP 70®) on Biomphalaria straminea from a highly endemic area of schistosomiasis in northeastern Brazil were investigated through laboratory bioassays. The LD50 and LD90 were 0.114 mg/l and 0.212 mg/l, respectively. Water-leaving behaviour occurred among 14% to 30% of the snails in the presence of sublethal doses of niclosamide and among 16% of the controls. It was concluded that both the relatively low susceptibility to niclosamide and water-leaving behaviour of local B. straminea may be responsible for the recolonization of transmission foci after mollusciciding. It was suggested that recently improved measures of snail control, such as controlled-release formulations of niclosamide and plant molluscicides should be considered in areas where snail control is recommended

Nitrous oxide and methane fluxes in south Brazilian gleysol as affected by nitrogen fertilizers

Nitrogen fertilizers increase the nitrous oxide (N2O) emission and can reduce the methane (CH4) oxidation from agricultural soils. However, the magnitude of this effect is unknown in Southern Brazilian edaphoclimatic conditions, as well as the potential of different sources of mineral N fertilizers in such an effect. The aim of this study was to investigate the effects of different mineral N sources (urea, ammonium sulphate, calcium nitrate, ammonium nitrate, Uran, controlled- release N fertilizer, and urea with urease inhibitor) on N2O and CH4 fluxes from Gleysol in the South of Brazil (Porto Alegre, RS), in comparison to a control treatment without a N application. The experiment was arranged in a randomized block with three replications, and the N fertilizer was applied to corn at the V5 growth stage. Air samples were collected from a static chambers for 15 days after the N application and the N2O and CH4 concentration were determined by gas chromatography. The topmost emissions occurred three days after the N fertilizer application and ranged from 187.8 to 8587.4 µg m-2 h-1 N. The greatest emissions were observed for N-nitric based fertilizers, while N sources with a urease inhibitor and controlled release N presented the smallest values and the N-ammonium and amidic were intermediate. This peak of N2O emissions was related to soil NO3--N (R² = 0.56, p < 0.08) when the soil water-filled pore space was up to 70 % and it indicated that N2O was predominantly produced by a denitrification process in the soil. Soil CH4 fluxes ranged from -30.1 µg m-2 h-1 C (absorption) to +32.5 µg m-2 h-1 C (emission), and the accumulated emission in the period was related to the soil NH4+-N concentration (R² = 0.82, p < 0.001), probably due to enzymatic competition between nitrification and metanotrophy processes. Despite both of the gas fluxes being affected by N fertilizers, in the average of the treatments, the impact on CH4 emission (0.2 kg ha-1 equivalent CO2-C ) was a hundredfold minor than for N2O (132.8 kg ha-1 equivalent CO2-C). Accounting for the N2O and CH4 emissions plus energetic costs of N fertilizers of 1.3 kg CO2-C kg-1 N regarding the manufacture, transport and application, we estimated an environmental impact of N sources ranging from 220.4 to 664.5 kg ha-1 CO2 -C , which can only be partially offset by C sequestration in the soil, as no study in South Brazil reported an annual net soil C accumulation rate larger than 160 kg ha-1 C due to N fertilization. The N2O mitigation can be obtained by the replacement of N-nitric sources by ammonium and amidic fertilizers. Controlled release N fertilizers and urea with urease inhibitor are also potential alternatives to N2O emission mitigation to atmospheric and systematic studies are necessary to quantify their potential in Brazilian agroecosystems.

Ammonia volatilization in no-till system in the south-central region of the State of Paraná, Brazil

Ammonia (NH3) volatilization can reduce the efficiency of urea applied to the surface of no-till (NT) soils. Thus, the objectives of this study were to evaluate the magnitude of NH3 losses from surface-applied urea and to determine if this loss justifies the urea incorporation in soil or its substitution for other N sources under the subtropical climatic conditions of South-Central region of Paraná State, Brazil. The experiment, performed over four harvesting seasons in a clayey Hapludox followed a randomized block design with four replicates. A single dose of N (150 kg ha-1) to V5 growth stage of corn cultivated under NT system was applied and seven treatments were evaluated, including surface-applied urea, ammonium sulfate, ammonium nitrate, urea with urease inhibitor, controlled-release N source, a liquid N source, incorporated urea, and a control treatment with no N application. Ammonia volatilization was evaluated for 20 days after N application using a semi-open static system. The average cumulative NH3 loss due to the superficial application of urea was low (12.5 % of the applied N) compared to the losses observed in warmer regions of Southeastern Brazil (greater than 50 %). The greatest NH3 losses were observed in dry years (up to 25.4 % of the applied N), and losses decreased exponentially as the amount of rainfall after N application increased. Incorporated urea and alternative N sources, with the exception of controlled-release N source, decreased NH3 volatilization in comparison with surface-applied urea. Urea incorporation is advantageous for the reduction of NH3 volatilization; however, other aspects as its low operating efficiency should be considered before this practice is adopted. In the South-Central region of Paraná, the low NH3 losses from the surface-applied urea in NT system due to wet springs and mild temperatures do not justify its replacement for other N sources.

Hygroscopicity and ammonia volatilization losses from nitrogen sources in coated urea

Hygroscopic fertilizers tend to absorb moisture from the air and may have undesirable characteristics such as moistness, clumping and lower fluidity, hampering the application. The increasing use of urea is due to its numerous advantages, although this nitrogen (N) source is highly susceptible to volatilization losses, particularly when applied to the soil surface of management systems with conservation of crop residues. The volatilization losses can be minimized by slow or controlled-release fertilizers, with controlled water solubility of the urea-coating materials; and by stabilized fertilizers, which prolong the period during which N remains in the amide or ammonia forms by urease inhibitors. This study evaluated the hygroscopicity of and ammonia volatilization from urea coated with boric acid and copper sulfate or with sulfur. The hygroscopicity of the sources was evaluated over time after exposure to five levels of relative humidity (RH) and volatilization evaluated after application to the soil surface covered with sugarcane trash. Ammonium nitrate has a low potential for volatilization losses, but is highly hygroscopic. Although coating with boric acid and copper sulfate or elemental sulfur reduced the critical humidity level of urea, the delay in the volatilization process is a potential positive factor.

Estudo da influência da natureza de reticulantes e aditivos orgânicos sobre o comportamento de géis de quitosana

The physical-chemical process of swelling in water-based gel of natural polymers is investigated with the purpose of applying these systems to biomedical materials for controlled release of drugs. In this work we develop a study about the sol-gel transition of solutions of chitosan in the presence of formaldehyde and glutaraldehyde like crosslinking agents and we have determined the effect of many aditives in the time of gelification from the elaborated sistems. The phisical-chemistry process of swelling of the formed gels was evaluated in function of the degree of crosslinking of the incorporated aditives and the pH. Gelling times of chitosan solutions were obtained using viscosimetric measurement, in the pre-gel state, as well as condutivity ones.The results obtained suggest that component concentration modifies the kinetic profile of the transition and the swelling behavior. Regarding H+ content, the gels were highly susceptible to swelling in acidic conditions, which characterize this system as pH - sensitive.

Modificação química de argilas: desafios científicos e tecnológicos para obtenção de novos produtos com maior valor agregado

Chemical modification of clays is possible due to their ion-exchange and adsorption capacities, which allows the adjustment of the physicochemical properties of the surfaces of their layers. This modification makes possible the use of clays to produce a great number of new materials, which range from coarse applications such as oil based drilling fluids to refined applications such as pharmaceutical products. This article intends to expose where there is still space for research and investment aiming at the performance improvement of clay-based materials.

Correlação entre parâmetros da cinética de intumescimento com características estruturais e hidrofílicas de hidrogéis de poliacrilamida e metilcelulose

In this paper, the effects of acrylamide (AAm), methylcellulose (MC) contents, pH and ionic strength on kinetic, network and hydrophilic properties of polyacrylamide and methylcellulose hydrogels were investigated. The hydrogels were characterized by evaluating of network [average molecular weight between crosslinks (M C), crosslink density (q) and the number of elastically effective chains (Ve)], and kinetic parameters [diffusional exponent (n), diffusion constant (k) and diffusion coefficient (D)]. Such properties were controlled by adjusting of the AAm, MC contents, pH and ionic strength factors. Due to high hydrophilicity and fast water-uptake, the PAAm-MC hydrogels can be considered as materials for potential applications in agricultural fields, mainly in controlled release of water or pesticides.

Formulações de atrazina em xerogéis: síntese e caracterização

In this study, controlled release formulations of Atrazine (ATZ) were synthesized by the sol-gel method and characterized by elemental, FTIR, SEM, BET and DSC analyses. The release kinetic of ATZ from the formulations in CaCl2 0.01 mol L-1 medium was monitored by UV/Vis spectroscopy. In all formulations, ATZ was physically dispersed on the Si-polymer, and the dispersion grade decreased with increasing amount of herbicide. The ATZ release kinetics was controlled mainly by dissolution, and the data could be fitted to the Korsmeyer - Pepper model. The ATZ as xerogel presents a lower affinity for soil than as granulated form.