Interfase y software de control para operar en sincronismo un automuestreador y un atomizador electrotérmico por filamento de tungsteno en espectrofotometría de absorción atómica

The interface and software for synchronous control of an autosampler and an electrothermal tungsten coil atomizer in atomic absorption spectrophotometry were developed. The control of the power supply, the trigger of the Read function of the spectrophotometer and the automatic operation of the autosampler was performed by software written in "TurboBasic". The system was evaluated by comparison of the repeatability of peak-height absorbances obtained in the atomization of lead by consecutive 10-µl injections of solutions (prepared in 0.2% v/v HNO3) using autosampler and manual sample introduction, and also by long term operation.

On the Efficiency of Alternatives in Process Plans

Process planning is a very important industrial activity, since it determines how a part or a product is manufactured. Process planning decisions include machine selection, tool selection, and cutting conditions determination, and thus it is a complex activity. In the presence of unstable demand, flexibility has become a very important characteristic of today's successful industries, for which Flexible Manufacturing Systems (FMSs) have been proposed as a solution. However, we believe that FMS control software is not flexible enough to adapt to different manufacturing system conditions aiming at increasing the system's efficiency. One means to overcome this limitation is to include pre-planned alternatives in the process plan; then planning decisions are made by the control system in real time to select the most appropriate alternative according to the conditions of the shop floor. Some of the advantages of this approach reported in the literature are the reduction of the number of tool setups, and the selection of a replacement machine for executing an operation. To verify whether the presence of alternatives in process plans actually increases the efficiency of the manufacturing system, an investigation was carried out using simulation and design of experiments techniques for alternative plans on a single machine. The proposed methodology and the results are discussed within this paper.

Analysis of open CNC architecture for machine tools

The evolution of digital circuit technology, leadind to higher speeds and more reliability allowed the development of machine controllers adapted to new production systems (e.g., Flexible Manufacturing Systems - FMS). Most of the controllers are developed in agreement with the CNC technology of the correspondent machine tool manufacturer. Any alterations or adaptation of their components are not easy to be implemented. The machine designers face up hardware and software restrictions such as lack of interaction among system's elements and impossibility of adding new function. This is due to hardware incompatibility and to software not allowing alterations in the source program. The introduction of open architecture philosophy propitiated the evolution of a new generation of numeric controllers. This brought the conventional CNC technology to the standard IBM - PC microcomputer. As a consequence, the characteristics of the CNC (positioning) and the microcomputer (easy of programming, system configuration, network communication etc) are combined. Some researchers have addressed a flexible structure of software and hardware allowing changes in the hardware basic configuration and all control software levels. In this work, the development of open architecture controllers in the OSACA, OMAC, HOAM-CNC and OSEC architectures is described.

Análisis político del Programa de Control del dengue en Morelos, México

OBJETIVO: Analizar medidas municipales implementadas para el control de la epidemia del dengue, sobretodo las de coordinación sectorial, gobernanza y participación de grupos sociales. MÉTODOS: Estudio de observación, realizado en Morelos, México, 2007. Los datos colectados en entrevistas y observaciones directas fueron sometidos a análisis de contenido y mapeo político. El software Policy Marker fue utilizado para evaluar los pesos atribuidos a los datos de desempeño (e.g. criterios alto, medio y bajo) y el papel de actores (acciones realizadas sean ellas de vigilancia, control o administrativas). Se realizó análisis estratégico de las oportunidades y desafíos en el cumplimiento de las políticas públicas y control del dengue. RESULTADOS: Las bases jurídicas indican que la respuesta a la epidemia es una tarea multisectorial. Sin embargo, la respuesta está centrada en actividades de los servicios de la salud, que están forzados a dar mayor apoyo financiero y derivar los recursos humanos necesarios, en contraste con la contribución de otros sectores (e.g. agua y saneamiento básico), que desconocen sus responsabilidades. El sector de la salud presenta alto nivel de factibilidad para la vinculación intra?institucional, en términos de optimización de recursos y cumplimiento de objetivos, particularmente entre autoridades de salud en los niveles estatal, jurisdiccional, municipal y local. CONCLUSIONES: El abordaje multidisciplinario y el fortalecimiento de las responsabilidades políticas permitirán la respuesta eficaz ante la epidemia del dengue, sustentada en la coordinación sectorial e involucramiento activo de la población afectada.

Assessment of embryo/fetus during pregnancy by threedimensional ultrasonography using the HD live software: iconographic essay

Fetal development is studied since the advent of two-dimensional ultrasonography. However, a detailed assessment of structures and surfaces improved with three-dimensional ultrasonography. Currently, it is possible to identify embryonic components and fetal parts with greater detail, at all pregnancy trimesters, using the HD live software, where the images gain realistic features by means of appropriate control of lighting and shadowing effects. In the present study, the authors utilized this resource to follow-up, by means of images, the development of a normal pregnancy along all trimesters.

Speed Control of an Autonomous Mobile Robot: Comparison between a PID Control and a Control Using Fuzzy Logic

An Autonomous Mobile Robot battery driven, with two traction wheels and a steering wheel is being developed. This Robot central control is regulated by an IPC, which controls every function of security, steering, positioning localization and driving. Each traction wheel is operated by a DC motor with independent control system. This system is made up of a chopper, an encoder and a microcomputer. The IPC transmits the velocity values and acceleration ramp references to the PIC microcontrollers. As each traction wheel control is independent, it's possible to obtain different speed values for each wheel. This process facilities the direction and drive changes. Two different strategies for speed velocity control were implemented; one works with PID, and the other with fuzzy logic. There were no changes in circuits and feedback control, except for the PIC microcontroller software. Comparing the two different speed control strategies the results were equivalent. However, in relation to the development and implementation of these strategies, the difficulties were bigger to implement the PID control.

Assessment of physiological potential of cucumber seeds using the software Seedling Vigor Imaging System® (SVIS®)

The software Seed Vigor Imaging System (SVIS®), has been successfully used to evaluate seed physiological potential by automated analyses of scanned seedlings. In this research, the efficiency of this system was compared to other tests accepted for assessing cucumber (Cucumis sativus L.) seed vigor of distinct seed lots of Supremo and Safira cultivars. Seeds were subjected to germination, traditional and saturated salt accelerated aging, seedling emergence, seedling length and SVIS analyses (determination of vigor indices and seedling growth uniformity, lengths of primary root, hypocotyl and whole seedlings). It was also determined whether the definition of seedling growth/uniformity ratios affects the sensitivity of the SVIS®. Results showed that analyses SVIS have provided consistent identification of seed lots performance, and have produced information comparable to those from recommended seed vigor tests, thus demonstrating a suitable sensitivity for a rapid and objective evaluation of physiological potential of cucumber seeds. Analyses of four-days-old cucumber seedlings using the SVIS® are more accurate and growth/uniformity does not affect the precision of results.

Uso do software Estradas para determinação do espaçamento entre desaguadouros em estradas não pavimentadas do interior de Goiás

Estradas não pavimentadas correspondem a aproximadamente 90% da malha rodoviária brasileira. Estas, na maioria das vezes, são construídas sem a realização de estudos prévios, estando sujeitas a vários tipos de problemas. Um dos principais fatores de deterioração dessas vias é a ineficiência do sistema de drenagem. Neste trabalho simulou-se o espaçamento entre desaguadouros em estradas não pavimentadas, utilizando-se um software desenvolvido com base num modelo matemático de dimensionamento de sistemas de drenagem em estradas não pavimentadas. Utilizaram-se valores de erodibilidade, tensão crítica de cisalhamento e massa específica para diferentes solos de estradas, localizadas no Estado de Goiás. Simularam-se cenários considerando alterações na declividade (1, 5, 10 e 15%) e na seção transversal do canal com relações entre altura e largura de 1:1, 1:2, 1:5 e 1:10. O modelo respondeu sensivelmente às alterações na declividade, na seção transversal do canal e nas de resistência do solo. Os espaçamentos obtidos indicaram que, estradas com declividades inferiores a 5%, mesmo com elevados valores de erodibilidade permitiram espaçamentos viáveis em aspectos construtivos. No entanto, para as declividades de 10 e 15%, os espaçamentos, na maioria dos casos, apresentaram dimensões reduzidas, tornando-se impraticáveis, sendo necessário, nestes casos, proteção do canal ou alteração de suas características hidráulicas.

Chemical treatment of papaya seeds aiming at long-term storage and control of damping off

Damping off is a nursery disease of great economic importance in papaya and seed treatment may be an effective measure to control. The aim of this work was to evaluate the quality of papaya seeds treated with fungicides and stored under two environmental and packaging conditions. Additionally, the efficiency of fungicide treatments in the control of damping-off caused by Rhizoctonia solani was evaluated. Papaya seeds were treated with the fungicides Captan, Tolylfluanid and the mixture Tolylfluanid + Captan (all commercial wettable powder formulations). Seeds of the control group were not treated. The seeds were stored for nine months in two conditions: packed in aluminum coated paper and kept at 7 ± 1ºC and in permeable kraft paper and kept in non-controlled environment. At the beginning of the storage and every three months the seed quality (germination and vigor tests), emergence rate index, height, dry mass and damping of plants in pre and post-emergence (in contaminated substrate and mycelia-free substrate) were analyzed. Both storage conditions as well as the fungicide treatments preserved the germination and seed vigor. In the infested substrate, seedling emergence was favored by fungicides, but in post-emergence, fungicides alone did not control the damping off caused by R. solani. Symptoms of damping off were not observed in the clean substrate. The results showed that the fungicide treatments may be used to pretreat papaya seed for long-term storage and commercialization.

Silicon in plant disease control

All essential nutrients can affect the incidence and severity of plant diseases. Although silicon (Si) is not considered as an essential nutrient for plants, it stands out for its potential to decrease disease intensity in many crops. The mechanism of Si action in plant resistance is still unclear. Si deposition in plant cell walls raised the hypothesis of a possible physical barrier to pathogen penetration. However, the increased activity of phenolic compounds, polyphenol oxidases and peroxidases in plants treated with Si demonstrates the involvement of this element in the induction of plant defense responses. The studies examined in this review address the role of Si in disease control and the possible mechanisms involved in the mode of Si action in disease resistance in plants.

Postharvest biological control of brown rot in peaches after cold storage preceded by preharvest chemical control 1

ABSTRACT Pathogenic fungi cause skin darkening and peach quality depreciation in post harvest. Therefore, alternative techniques to chemical treatment are necessary in order to reduce risks to human health. The aim of this study was to evaluate the effect of the application of Trichoderma harzianum in association with different fungicides applied before harvest to 'Eldorado' peaches for brown rot control and other quality parameters during storage. The treatments consisted of five preharvest fungicide applications (control, captan, iprodione, iminoctadine and tebuconazole) associated with postharvest application of T. harzianum, after cold storage (with and without application), in three evaluation times (zero, two and four days at 20 °C), resulting in a 5x2x3 factorial design. The application of T. harzianum only brought benefits to the control of brown rot when combined with the fungicide captan, at zero day shelf life. After two days, there was a greater skin darkening in peaches treated with T. harzianum compared with peaches without the treatment, except for peaches treated with the fungicide iprodione and T. harzianum The application of T. harzianum during postharvest showed no benefits for the control of brown rot, however, the association with fungicides reduced the incidence of Rhizopus stolonifer during the shelf life.