Duration of larval and pupal development stages of Aedes albopictus in natural and artificial containers

Aedes albopictus were reared in different containers: a tree hole, a bamboo stump and an auto tire. The total times from egg hatching to adult emergence were of 19.6,27.3 and 37.5 days, respectively, according to the container. The first, second and third-instar larvae presented growth periods with highly similar durations. The fourth-instar larvae was longer than the others stages. The pupation time was longer than the fourth-instar larvae growth period. The temperature of the breeding sites studied, which was of 18° C to 22° C on average, was also taken into consideration. The mortality of the immature stages was analysed and compared as between the experimental groups; it was lower in the natural containers than in the discarded tire. The average wing length of adult females emerging from tree hole was significantly larger (p < 0.05) than that of those emerging from the tire.

Frequency, diversity, and productivity study on the Aedes aegypti most preferred containers in the city of Manaus, Amazonas, Brazil

The most preferred containers by Aedes aegypti were studied April and July (rainy and dry periods) in two Manaus neighbourhoods. In all, 2,700 premises and 13,912 containers were examined, most (87%) recorded outdoors. Out of the 13,100 inspected premises, only 1.6% showed to be positive for Aedes aegypti, summing up to 7,916 collected samples. Most frequently found containers outdoors in either neighbourhood regardless of rain or dry period were Bottles flasks and Storage, and indoors, Fixed, Flowerpots, and buckets. Productivity was estimated according to the number of premises and positive containers investigated, showing the actual container groups productivity. Considering both rainy and dry periods outdoors at Praça 14 the groups of Tyre, Flask, Bottle, Construction Equipment and Fixed, had the highest averages respectively. Construction Equipment and Flask groups were the most productive in Coroado in April. Flask, Construction Equipment and Storage groups stood out in July.

Variation in Aedes aegypti (Linnaeus) (Diptera, Culicidae) infestation in artificial containers in Caxias, state of Maranhão, Brazil

INTRODUCTION: Dengue is a serious public health problem worldwide, with cases reported annually in tropical and subtropical regions. Aedes aegypti (Linnaeus, 1762), the main vector of dengue, is a domiciliary species with high dispersal and survival capacities and can use various artificial containers as breeding sites. We assessed potential container breeding sites of A. aegypti in the municipality of Caxias, Maranhão, Brazil. METHODS: In the initial phase, we analyzed 900 properties in 3 neighborhoods during the dry and rainy seasons (August-October 2005 and February-April 2006, respectively). During the second sampling period, September 2006-August 2007, we used 5 assessment cycles for 300 properties in a single neighborhood. RESULTS: During the dry and rainy seasons, water-storage containers comprised 55.7% (n = 1,970) and 48.5% (n = 1,836) of the total containers inspected, and showed the highest productivity of immature A. aegypti; we found 23.7 and 106.1 individuals/container, respectively, in peridomicile sites. In intradomicile sites, water-storage containers were also the most important breeding sites with 86.4% (n = 973) and 85.6% (n = 900) of all containers and a mean of 7.9 and 108.3 individuals/container in the dry and rainy seaso-October 2006 (1,342). The highest number of positives (70) was recorded in May, mostly (94%) in storage containers. CONCLUSIONS: Storage containers are the principal and most productive A. aegypti breeding sites and are a major contributing factor to the maintenance of this vector in Caxias.

Evaluation of two sweeping methods for estimating the number of immature Aedes aegypti (Diptera: Culicidae) in large containers

Introduction Here, we evaluated sweeping methods used to estimate the number of immature Aedes aegypti in large containers. Methods III/IV instars and pupae at a 9:1 ratio were placed in three types of containers with, each one with three different water levels. Two sweeping methods were tested: water-surface sweeping and five-sweep netting. The data were analyzed using linear regression. Results The five-sweep netting technique was more suitable for drums and water-tanks, while the water-surface sweeping method provided the best results for swimming pools. Conclusions Both sweeping methods are useful tools in epidemiological surveillance programs for the control of Aedes aegypti.

Suitability of containers from different sources as breeding sites of Aedes aegypti (L.) in a cemetery of Buenos Aires City, Argentina

Cemeteries are ideal urban areas to study the importance of different types of containers as breeding sites of Aedes aegypti (L.). In the present study, the suitability of plastic, glass, ceramic and metal containers was evaluated in four patches within a cemetery of Buenos Aires City, Argentina. Between October 1998 and May 2000, we found 215 breeding sites of Ae. aegypti out of 13,022 water-filled containers examined. In two patches containing microenvironments sheltered from the sun, the use of the different types of containers was proportional to the offer (correlation coefficient = 0.99, P < 0.05 in both cases). In the remaining patches, plastic and metal containers were the most and less frequent breeding sites, respectively (P < 0.001 in both cases). The number of immatures per breeding site (median = 4.5) did not show significant differences among the four types of containers examined (H3, 215 = 1.216, P = 0.749). Differences found in patches from a same cemetery suggest that different microenvironmental conditions affect the suitability of each type of container for Ae. aegypti breeding. Plastic containers appeared as key breeding sites that should be removed to reduce the Ae. aegypti population in the study area.

Records of Anopheles (Nyssorhynchus) (Diptera, Culicidae) in artificial containers in Ribeirão Preto City, State of São Paulo, Brazil

Thirty immatures of Anopheles darlingi Root, Anopheles argyritarsis Robineau-Desvoidy and Anopheles rondoni (Neiva & Pinto) (were found in an artificial lagoon situated near Pardo River, in Ribeirão Preto City, State of São Paulo, Brazil. The presence of immatures of Anopheles darlingi breeding in a lagoon is suggestive of the potential capacity of that species to adapt and occupy new habitats and to invade urban areas along the species distribution range and also disperse to new localities.

Outplanting performace of eucalyptus clonal cuttings produced in different containers and substrates

The objective of this work was to evaluate the outplanting growth of Eucalyptus grandis e E. saligna clones, produced by cuttings in tubes (50cm³) and in pressed blocks (40x60x07cm) - 175 cm³/ seedlings, with different substrates (BT - sugarcane bagasse+sugarcane filter cake; AR - carbonized rice hull + eucalyptus bark; TF - peat). The experiment was arranged in a randomized block design, in a 2x7 factorial (2 clones and 7 treatments), with four replicates with 25 plants. Survival was evaluated two months later. Plant growth was monitored through height and ground level diameter at 20, 40, 60, 120 and 180 days after outplanting. To evaluate the effect of the containers on stem and root biomass in both clones, 180 days after outplanting, the cuttings grown in BT substrate with fertilizer were selected. One plant per plot of each clone, grown in tubes and in pressed blocks was selected. The E. grandis and E. saligna cuttings grown in pressed blocks with sugarcane bagasse+sugarcane filter cake presented greater height and diameter after out planting. Both clones presented larger root, bark, log and branch biomass production in plants produced in the block system. Cuttings of E. saligna grown in pressed blocks showed 80% most wood biomass 180 days after outplanting, compared to that grown in tubes. In E. grandis, the differences in diameter and height, in function of the cutting production system, decreased along time, while in E. saligna these differences increased along the evaluation period.

PRODUCTION OF AUSTRALIAN CEDAR SEEDLINGS INOCULATED WITH ARBUSCULAR MYCORRHIZAL FUNGI IN DIFFERENT TYPES OF CONTAINERS

ABSTRACT The present study aimed to evaluate the growth and the levels of N, P, K, Ca and Mg in Australian cedar seedlings which had been inoculated with arbuscular mycorrhizal fungi (AMF) in different types of containers. The experiment was carried out in a greenhouse and the experimental design was that of randomized complete blocks (RCB), with a 4 x 4 factorial design consisting of four inoculation treatments with AMF (Rhizophagus clarum, Gigaspora margarita, a mixed inoculation (R. clarum + G. margarita) and the control (with no AMF inoculation); four types of containers (plastic bags measuring 250 cm3, tubes of 55 and 130 cm3 and pressed blocks 440 cm3. plant-1), with four repetitions. The height, the diameter of the stem base, the aerial part dry weight (APDW), the dry weight of the root (DWR) and the total plant dry weight (DW) were measured, along with the Dickson quality index, the percentage of mycorrhizal colonization and the levels of N, P, K, Ca and Mg in the aerial part dry weight. One hundred and thirty eight days (138) days after sowing, the greatest growth and/or the highest levels of P, K and Ca could be observed in the aerial part dry weight of the Australian cedar seedlings which had been planted in the pressed block container and inoculated with a mixture of the two AMF species (G. margarita + R. clarum) or with just R. clarum. Thus it can be seen that AMF can make a significant contribution to the production of Australian cedar seedlings.

Evaluation of alternative containers to determining the working width of fertilizer spreaders

Farmers have difficult of determining the evenness of transverse distribution and the working width, due the tests with this aim require equipments and complex methodologies. So, this study evaluates some alternative containers with the aim to allow a more accessible adjustment of the full width of the solid fertilizer spreaders. Four different containers were tested: i) standard container constructed in accordance with ISO 5690/1; ii) container of polyethylene (plastic trays) with screen shading to prevent the ricochet of material; iii) containers composed by boxes of long-life milk, and iv) containers composed by flowerpots (number 3.5). Also, three different spreaders were used for the tests. Alternative containers showed greater retention of particles than the standardized containers. The full width of work obtained for the coefficients of variation of 12.5; 15; 17.5 and 20%, ranged due the containers in the different pathways. The flowerpots of polyethylene showed similar results to the standardized containers. The heights of the containers were more important for its efficiency than its area of collection.

Formation of beetroot seedlings in different protected environments, substrates and containers in Aquidauana region, State of Mato Grosso do Sul, Brazil

This study with beetroot seedlings, cultivar Top Tall Early Wonder, was carried out at the State University of Mato Grosso do Sul (UEMS/Aquidauana), from October to November 2008. Three environments of cultivation were used: greenhouse; nursery with monofilament screen of 50 % of shading; and nursery with aluminized thermal reflective screen of 50% of shading. In these environments, three polystyrene trays of 72, 128 and 200 cells, filled with four substrates, were tested: soil; Plantmax®; coconut fiber and vermiculite. There were no replication environments and then each one was considered an experiment alone. For each environment, it was adopted a completely randomized design in factorial scheme 3x4 (three trays x four substrates), with four replications, performing individual analysis of variance and joint analysis of experiments for environment comparisons. The monofilament screen is the best environment for seedlings produced in tray of 72 cells, and the greenhouse was the best environment for seedlings produced in trays of 128 cells. The best seedlings were formed in the tray of 72 cells. Vermiculite was the best substrate.

Postharvest quality of cocona (Solanum sessiliflorum Dunal) stored under ambient condition

Cocona (Solanum sessiliflorum Dunal) is an important genetic resource that has been traditionally used for a variety of purposes, including food, medical and cosmetics applications. The objective of this study was evaluated the quality and the period of postharvest shelf life of cocona 'Mosquet", through the physical, chemical and physiological characterization of fruits stored under the ambient conditions. Physiologically mature fruits were harvested from an orchard, washed with tap water and soaked in a solution of the fungicide Prochloraz (49.5 g/100 L of water) for 5 minutes. After air drying, the fruits were packed in plastic containers and stored at 24 ± 2 ºC and relative humidity 60 ± 5% for 15 days. The fruits developed a respiratory climacteric respiratory patern and remained fit for consumption up to day 6 of storage, that is, without visual symptoms of loss of water and firmness. At this stage, the fruits showed firmness of 117,42 kPa, soluble solids of 6.62º Brix and citric acid of 1.22 %.

Aedes aegypti entomological indices in an endemic area for dengue in Sao Paulo State, Brazil

OBJECTIVE: To evaluate the most productive types of properties and containers for Aedes aegypti and the spatial distribution of entomological indices.METHODS: Between December 2006 and February 2007, the vector's immature forms were collected to obtain entomological indices in 9,875 properties in the Jaguare neighborhood of Sao Jose do Rio Preto, SP, Southeastern Brazil. In March and April 2007, a questionnaire about the conditions and characteristics of properties was administered. Logistic regression was used to identify variables associated with the presence of pupae at the properties. Indices calculated per block were combined with a geo-referenced map, and thematic maps of these indices were obtained using statistical interpolation.RESULTS: The properties inspected had the following Ae. aegypti indices: Breteau Index = 18.9, 3.7 larvae and 0.42 pupae per property, 5.2 containers harboring Ae. aegypti per hectare, 100.0 larvae and 11.6 pupae per hectare, and 1.3 larvae and 0.15 pupae per inhabitant. The presence of yards, gardens and animals was associated with the presence of pupae.CONCLUSIONS: Specific types of properties and containers that simultaneously had low frequencies among those positive for the vector and high participation in the productivity of larvae and pupae were not identified. The use of indices including larval and pupal counts does not provide further information beyond that obtained from the traditional Stegomyia indices in locations with characteristics similar to those of São José do Rio Preto. The indices calculated per area were found to be more accurate for the spatial assessment of infestation. The Ae. aegypti infestation levels exhibited extensive spatial variation, indicating that the assessment of infestation in micro areas is needed.

Finding Aedes aegypti in a natural breeding site in an urban zone, Sao Paulo, Southeastern Brazil

ABSTRACT This is the description of how nine Aedes aegypti larvae were found in a natural breeding site in the Pinheiros neighborhood, city of Sao Paulo, SP, Southeastern Brazil. The record was conducted in December 2014, during an entomological surveillance program of dengue virus vectors, with an active search of potential breeding sites, either artificial or natural. Finding Ae. aegypti larvae in a tree hole shows this species’ ability to use both artificial and natural environments as breeding sites and habitats, which points towards the importance of maintaining continuous surveillance on this mosquito in all kinds of water-holding containers.

Persistence of Vectobac WDG and Metoprag S-2G against Aedes aegypti larvae using a semi-field bioassay in Rio de Janeiro, Brazil

Persistence of Bacillus thuringiensis var. israelensis (Vectobac WDG) and methoprene (Metoprag S-2G) was evaluated against Aedes aegypti late third instar larvae of the Rockefeller strain in a semi-field bioassay. Tests were performed in Rio de Janeiro, using containers made of plastic, iron, concrete and asbestos, placed in a shaded area. The formulations used were 0.2 g of Vectobac-WDG and 1g of Metoprag S-2G per 100 liters of water in house storage containers. Vectobac WDG was tested twice, in March and in April/May, 2002. In March (temperature ranging from 21.5 to 39.3 ºC), 70-100% mortality was observed by the 7th day and declined abruptly thereafter. No significant differences were observed among the container types. In April/May (18.6 to 34.8 ºC) mortality was higher than 70% to 30-36 days in all cases, except in the iron container (40% mortality on the 12th day). Metoprag S-2G was evaluated in April/May, 2002, and induced mortality higher than 70% up to 15 days in the plastic and iron containers and only seven days in the concrete container. In the asbestos container, maximal mortality was achieved on day one post-treatment (66%). Our results point to a low persistence of both formulations in the weather conditions of Rio de Janeiro.

Residual effect of two Bacillus thuringiensis var. israelensis products assayed against Aedes aegypti (Diptera: Culicidae) in laboratory and outdoors at Rio de Janeiro, Brazil

Resistance of the dengue vector to temephos stimulated its substitution for Bacillus thuringiensis var. israelensis (Bti) since 2001 in Brazil. The persistence of the two Bti formulations employed at that time by the Health Ministry, Vectobac G and Aquabac G, was assayed under laboratory and outdoor conditions. Both formulations were tested at 0.2 g/10 liters of water, the same concentration applied in the field for vector control. The tests were done against Ae. aegypti third instar larvae (Rockefeller strain). In the laboratory, Vectobac G and Aquabac G caused at least 95% mortality until 101 and 45 days after treatment, respectively. In the outdoor assays, test containers of different materials were treated with either formulation and placed in a shaded area. Larvae were introduced each 3-6 days and mortality was recorded 24 and 48 hours later. In the first set of assays, performed in June 2001, mortality levels of 70% or more were attained for 2-5 weeks for both formulations in all containers. The exception was for the iron one that rusted, resulting in low mortality after seven days. In the second set of assays (August 2001), 70% mortality was attained for just 1-2 weeks for all the containers and both formulations.