Desenvolvimento de um sistema automatizado para a fabricação de filmes automontados

In this technical note, we describe the construction of a low-cost computer controlled device for layer-by-layer film fabrication. The software allows to control multiple material deposition, washing and drying steps and the time for each operation. To test the device, we produced and characterized self-assembled films of conductive polymers by alternating poly(o-methoxyaniline) (POMA) and poly(3-thiophene acetic acid) (PTAA) via the layer-by-layer technique.

DISPOSITIVO PARA EXTRAÇÃO LÍQUIDO-LÍQUIDO EM SISTEMAS DE ANÁLISES EM FLUXO

AbstractA device comprising a lab-made chamber with mechanical stirring and computer-controlled solenoid valves is proposed for the mechanization of liquid-liquid extractions. The performance was demonstrated by the extraction of ethanol from biodiesel as a model of the extraction of analytes from organic immiscible samples to an aqueous medium. The volumes of the sample and extractant were precisely defined by the flow-rates and switching times of the valves, while the mechanic stirring increased interaction between the phases. Stirring was stopped for phase separation, and a precise time-control also allowed a successful phase separation (i.e., the absence of the organic phase in the aqueous extract). In the model system, a linear response between the analytical response and the number of extractions was observed, indicating the potential for analyte preconcentration in the extract. The efficiency and reproducibility of the extractions were demonstrated by recoveries of ethanol spiked to biodiesel samples within 96% and 100% with coefficients of variation lower than 3.0%.

A clinical gamma camera-based pinhole collimated system for high resolution small animal SPECT imaging

The main objective of the present study was to upgrade a clinical gamma camera to obtain high resolution tomographic images of small animal organs. The system is based on a clinical gamma camera to which we have adapted a special-purpose pinhole collimator and a device for positioning and rotating the target based on a computer-controlled step motor. We developed a software tool to reconstruct the target’s three-dimensional distribution of emission from a set of planar projections, based on the maximum likelihood algorithm. We present details on the hardware and software implementation. We imaged phantoms and heart and kidneys of rats. When using pinhole collimators, the spatial resolution and sensitivity of the imaging system depend on parameters such as the detector-to-collimator and detector-to-target distances and pinhole diameter. In this study, we reached an object voxel size of 0.6 mm and spatial resolution better than 2.4 and 1.7 mm full width at half maximum when 1.5- and 1.0-mm diameter pinholes were used, respectively. Appropriate sensitivity to study the target of interest was attained in both cases. Additionally, we show that as few as 12 projections are sufficient to attain good quality reconstructions, a result that implies a significant reduction of acquisition time and opens the possibility for radiotracer dynamic studies. In conclusion, a high resolution single photon emission computed tomography (SPECT) system was developed using a commercial clinical gamma camera, allowing the acquisition of detailed volumetric images of small animal organs. This type of system has important implications for research areas such as Cardiology, Neurology or Oncology.

Electrically driven fertilizer applicator controlled by fuzzy logic

The present study shows the development, simulation and actual implementation of a closed-loop controller based on fuzzy logic that is able to regulate and standardize the mass flow of a helical fertilizer applicator. The control algorithm was developed using MATLAB's Fuzzy Logic Toolbox. Both open and closed-loop simulations of the controller were performed in MATLAB's Simulink environment. The instantaneous deviation of the mass flow from the set point (SP), its derivative, the equipment´s translation velocity and acceleration were all used as input signals for the controller, whereas the voltage of the applicator's DC electric motor (DCEM) was driven by the controller as output signal. Calibration and validation of the rules and membership functions of the fuzzy logic were accomplished in the computer simulation phase, taking into account the system's response to SP changes. The mass flow variation coefficient, measured in experimental tests, ranged from 6.32 to 13.18%. The steady state error fell between -0.72 and 0.13g s-1 and the recorded average rise time of the system was 0.38 s. The implemented controller was able to both damp the oscillations in mass flow that are characteristic of helical fertilizer applicators, and to effectively respond to SP variations.

Performance, carcass traits and costs of Suffolk lambs finishing systems with early weaning and controlled suckling

The performance, carcass traits and finishing costs of Suffolk lambs were evaluated in three systems: (1) lambs weaned with 22 kg of body weight (BW) and supplemented with concentrate on pasture until slaughter; (2) lambs weaned with 22 kg BW and fed in feedlot until slaughter; (3) lambs maintained in controlled nursing after 22 kg BW and creep fed in feedlot until slaughter. Average daily gain (ADG) was 224 g/d for lambs weaned and supplemented with concentrate on pasture, 386 g/d for lambs weaned in feedlot and 481 g/d for lambs under controlled nursing. Empty body weight and visceral fat deposition were highest in lambs from feedlot systems. Carcass weights and carcass yields were highest for lambs in controlled nursing. Finishing total costs were highest in controlled nursing and lowest in the system with weaning in feedlot. High concentrate diet associated with controlled nursing in feedlot allowed lambs to reach the growth potential and carcasses with higher weights, higher yields and higher fat content. After weaning, lambs in feedlot fed with high concentrate diet had higher weight gain than lambs supplemented with concentrate on pasture. Carcasses produced under these two systems presented the same characteristics. The system with weaning in feedlot showed the lowest cost per kg carcass.

Selection of anthracnose resistant common beans using detached leaves in partially controlled environment

The objectives of this study were to evaluate the possibility of selecting anthracnose resistant common bean plants using detached primary leaves in partially controlled environment of a greenhouse and identify differences in the reaction of genotypes to anthracnose. The common bean cultivars Ouro Negro, OuroVermelho, ManteigãoFosco 11, Rudá, Rudá-R, VP8, BRSMG Madrepérola, Pérola, MeiaNoite and BRSMG Talismãwere characterizedfor resistance to the races 65, 81 and 453 of Colletotrichum lindemuthianum and the method of detached primary leaves was compared to the method with the traditional inoculation of plants at the phenological stage V2. The lines Rudá, Rudá-R and Pérola were inoculated with the races 65 and 453 of C. lindemuthianum, aiming to assess the rate of coincidence of anthracnose severity by both inoculation methods. In general, the two methods presented similar results for the reaction of the cultivars. The use of detached primary leaves of common bean plants in the partially controlled environment was feasible for selection of plants resistant to anthracnose and has the advantages of low-needed infrastructure and reduction of resources, space and time.

Productivity of irrigated beans due to sources of stabilized nitrogen fertilizer and controlled release

ABSTRACT New nitrogen fertilizers are available in the market actually, however, does not have results on the efficiency of the Cerrado conditions. With that objective of this study was to evaluate the effect of urea including stabilized and controlled release urea on yield of irrigated common beans (Phaseolus vulgaris L) in no-tillage system. The experiment was conducted in the winter crop, at Embrapa Arroz e Feijão, in Santo Antônio de Goiás, State of Goiás, Brazil. The experimental design was randomized blocks, with five replicates. Treatments consisted of five N sources (urea, urea + NBPT, urea + polymer, ammonium sulphate, and ammonium nitrate) and a control (without N) being applied 20 kg ha-1 of N at sowing and 80 kg ha-1 onf N in topdressing. We evaluated the chlorophyll content in leaves of common beans, the leaf N content and dry mass weight (MSPA) in the flowering of common beans, the number of pods per plant, number of grains per pod, mass of 100 grains, grain yield and final stand of the common beans. The sources of nitrogen fertilizer did not influence, leaf N content, the mass of MSPA and the relative chlorophyll index of common beans. The use of polymerized urea and urea with urease inhibitor, did not produce increases in the number of grains per pod, number of pods per plant, mass of 100 grains and common beans yield compared to traditional sources of N, urea, ammonium sulfate and ammonium nitrate.

Reactogenicity of yellow fever vaccines in a randomized, placebo-controlled trial

OBJECTIVE: To compare the reactogenicity of three yellow fever (YF) vaccines from WHO-17D and Brazilian 17DD substrains (different seed-lots) and placebo. METHODS: The study involved 1,087 adults eligible for YF vaccine in Rio de Janeiro, Brazil. Vaccines produced by Bio-Manguinhos, Fiocruz (Rio de Janeiro, Brazil) were administered ("day 0") following standardized procedures adapted to allow blinding and blocked randomization of participants to coded vaccine types. Adverse events after immunization were ascertained in an interview and in diary forms filled in by each participant. Liver enzymes were measured on days 0, 4-20 and 30 of the study. Viremia levels were measured on days 4 to 20 of follow-up. The immune response was verified through serologic tests. RESULTS: Participants were mostly young males. The seroconversion rate was above 98% among those seronegative before immunization. Compared to placebo, the excess risk of any local adverse events ranged from 0.9% to 2.5%, whereas for any systemic adverse events it ranged from 3.5% to 7.4% across vaccine groups. The excess risk of events leading to search for medical care or to interruption of work activities ranged from 2% to 4.5%. Viremia was detected in 3%-6% of vaccinees up to 10 days after vaccination. Variations in liver enzyme levels after vaccination were similar in placebo and vaccine recipients. CONCLUSIONS: The frequency of adverse events post-immunization against YF, accounting for the background occurrence of nonspecific signs and symptoms, was shown for the first time to be similar for vaccines from 17D and 17DD substrains. The data also provided evidence against viscerotropism of vaccine virus.

Hepatitis B vaccine in infants: a randomized controlled trial comparing gluteal versus anterolateral thigh muscle administration

A significantly diminished antibody response to hepatitis B vaccine has been demonstrated in adults when the buttock is used as the injection site. However, in Brazil, the buttock continues to be recommended as site of injection for intramuscular administration of vaccines in infants. In this age group, there are no controlled studies evaluating the immunogenicity of the hepatitis B vaccine when administered at this site. In the present study, 258 infants were randomized to receive the hepatitis B vaccine either in the buttock (n = 123) or in the anterolateral thigh muscle (n = 135). The immunization schedule consisted of three doses of hepatitis B vaccine (Engerix Bâ, 10 mug) at 2, 4 and 9 months of age. There were no significant differences in the proportion of seroconversion (99.3% x 99.2%), or in the geometric mean titer of ELISA anti-HBs (1,862.1 x 1,229.0 mIU/mL) between the two groups. This study demonstrates that a satisfactory serological response can be obtained when the hepatitis B vaccine is administered intramuscularly into the buttock.

Penicillin at the late stage of leptospirosis: a randomized controlled trial

There is evidence that an early start of penicillin reduces the case-fatality rate of leptospirosis and that chemoprophylaxis is efficacious in persons exposed to the sources of leptospira. The existent data, however, are inconsistent regarding the benefit of introducing penicillin at a late stage of leptospirosis. The present study was developed to assess whether the introduction of penicillin after more than four days of symptoms reduces the in-hospital case-fatality rate of leptospirosis. A total of 253 patients aged 15 to 76 years with advanced leptospirosis, i.e., more than four days of symptoms, admitted to an infectious disease hospital located in Salvador, Brazil, were selected for the study. The patients were randomized to one of two treatment groups: with intravenous penicillin, 6 million units day (one million unit every four hours) for seven days (n = 125) and without (n = 128) penicillin. The main outcome was death during hospitalization. The case-fatality rate was approximately twice as high in the group treated with penicillin (12%; 15/125) than in the comparison group (6.3%; 8/128). This difference pointed in the opposite direction of the study hypothesis, but was not statistically significant (p = 0.112). Length of hospital stay was similar between the treatment groups. According to the results of the present randomized clinical trial initiation of penicillin in patients with severe forms of leptospirosis after at least four days of symptomatic leptospirosis is not beneficial. Therefore, more attention should be directed to prevention and earlier initiation of the treatment of leptospirosis.

Enterobius vermicularis infection is well controlled among preschool children in nurseries of Taipei City, Taiwan

INTRODUCTION: Whether Enterobius vermicularis (pinworm) infections among preschool children in Taipei City had truly declined was investigated. METHODS: A total of 6,661 preschool children from 28 nurseries were randomly selected from 4 major geographic districts in Taipei City to examine the status of pinworm infection by using adhesive thin cellophane tape swab method. RESULTS: The overall prevalence of pinworm infection was 0.5% (30/6,661). Boys (0.6%; 21/3,524) had higher prevalence than girls (0.3%; 9/3,137) (p=0.06). Southern district (0.6%; 10/1,789) showed insignificantly higher prevalence than Western district (0.2%; 1/606) (p=0.22). CONCLUSIONS: Pinworm screening program remains necessary for some parts of Taipei City.