Morphometric study of the fibrosis and mast cell count in the circular colon musculature of chronic Chagas patients with and without megacolon

A morphometric study of the circular colon musculature was performed, in which the mast cell count was determined and the connective fibrous tissue in this layer was measured. The objective was to gain better understanding of Chagas megacolon morphology and contribute towards the knowledge of fibrosis pathogenesis in Chagas megas. An evaluation was made of 15 distal sigmoid rings from Chagas patients with megacolon (MCC), 15 without megacolon (CSMC) and 15 non-Chagas patients (NC). The rings were fixed in formol, embedded in paraffin, and 7mm thick sections were cut and stained using Azan-Heidenhain and Giemsa. The mast cell count and fibrosis were greater in the MCC group than in the CSMC and NC groups (p < 0.05; Kruskal-Wallis test) and there was no significant difference between the latter two. The fibrosis and increased mast cell count in the colon musculature of the MCC group possibly indicates that there is a relationship between mastocytosis and fibrosis, as has already been demonstrated in other pathologies.

Effects of circular myotomy on the healing of esophageal suture anastomosis: an experimental study

For esophageal reconstruction in newborns with esophageal atresia, esophageal reunion with an end-to-end anastomosis is the ideal procedure, although it may result in leaks and strictures due to tension on the suture line, mainly in cases with a wide gap between the ends. Circular myotomy (Livaditis' procedure) is the best method to elongate the proximal esophageal pouch and reduce anastomotic tension. This experimental investigation in dogs was undertaken to attempt to verify that circular myotomy decreases the anastomotic leak rate in newborns with wide gap esophageal atresia, and to analyze whether the technique promotes morphologic changes in the anastomotic scar. A pilot study demonstrated that it is necessary to resect more than 8 cm (40% of the total esophageal length) in order to obtain high leak rates. In the experimental project, such resection was performed in dogs divided into two groups (control group, anastomosis only, and experimental group, anastomosis plus circular myotomy in the proximal esophageal segment). The animals were killed in the 14th postoperative day, submitted to autopsy, and were evaluated as to the presence of leaks and strictures, as well as to the features (macroscopic and microscopic aspects) of the anastomosis. Leak rates were the same in both groups. Morphometric analysis revealed that in animals in the experimental group, the anastomotic scar was thinner than the control animals, and the isolated muscular manchette distal to the site of myotomy was replaced by fibrous tissue. Correspondingly, a decreased number of newly formed small vessels were noted in the experimental animals, compared to control animals. We concluded that circular myotomy does not decrease the incidence of anastomotic leaks, and it also promotes deleterious changes in anastomotic healing.

The use of dacron plates for DOT enzyme-linked immunosorbent assay (DOT-ELISA)

Dacron (polyethylenetherephthalate) is proposed as a matrix for dot-ELISA procedures, as an alternative to nitrocellulose. Plates of dacron were partially hydrazinolyzed and hydrazide groups introduced were converted to azide groups. The derivative dacron-antigen was covalently linked on to the plates through these azide groups. The derivative dacron-antigen was exaustively washed according to CROOK and antigen was still fixed onto the plates. Protein F1A purified from Yersinia pestis was used as a model. Triration of sera from immunized and non immunized rabbits against this protein was carried out by employing the dot-ELISA method. No significant difference was observed using dacron-antigen and nitrocellulose-antigen preparations. However, both procedures showed to have a significant better performance in comparasion with the passive hemagglutination method. The specificity and reproductibility of the dot-ELISA assay using both preparations showed a similar behaviour. Nitrocellulose preparation was stable at 4ºC, 28ºC and -20ºC for 90 days, whereas the dacron-antigen derivative was stable only when stored at 4ºC. Dacron-antigen derivative could be re-used when the spot developing was proceeded using 4-chloro-1-naphtol as substrate.

Gundlachia dutrae: n. sp. from northwest Brazil (Mollusca: Basommatophora: Ancylidae)

A new species of Gundlachia, Gundlachia dutrae is described from northwest Brazil. It is distinguishable from other congenerie species by characteristics of the shell, radula and internal organs. Shell relatively high. Aperture near-circular; periostracum dark brown without periostracal hairs. Apex slightly inclined to the right, projected but not hooked, with an apical depression surrounted by a sculpture of well-marked irregular punctations. Shell surface with prominent radial sculpture. No septate specimens were observed. Ratios (n= 59): shell width/shell lenght = 0,66- 0,79 (mean 0,73); shell height/shell length = 0,32- 0,45 ( mean 0,37); shell height/shell width = 0,43- 0,63 (mean 0,51). Body of normal ancylid type; mantle pigmentation dark brown or black, concentrated along the mantle collar. The dorsal surface of the right anterior muscle is elongated and medially constricted. The left anterior and the posterior muscles are almost elliptical. Adhesive area is V-shaped. Pseudobranch unpigmented bearing a very small and thin dorsal lobe. Ovotestis with more than 25 unbranched diverticula. Ovispermiduct with seminal vesicle rather developed. Elongated nidamental gland continous with the glandular wall of the uterus. Nidamental gland appendix ending into a bulbous swelling Spermathecal body almost rounded. Well-developed prostate with five long diverticula. Ejaculatory complex with long glandular flagellum, without a penis or true ultra-penis. "Penis sheath" developed. "Ultra-penis" projected as a tube inside the lumem of prepuce, with a slit between "ultra-penis" and "penis sheath". Rachidian tooth tetracuspid, with two median cusps assymmetrical and aculeated. Lateral teeth tricuspid, with a reduced endocon and a prominent mesocon. A well marked gap occurs between meso and ectocon. Marginal teeth similar to lateral ones. Jaw T-shaped, with about 28 dorsal plates.

Detection of extracellular proteases from microorganisms on agar plates

We present herein an improved assay for detecting the presence of extracellular proteases from microorganisms on agar plates. Using different substrates (gelatin, BSA, hemoglobin) incorporated into the agar and varying the culture medium composition, we were able to detect proteolytic activities from Pseudomonas aeruginosa, Micrococcus luteus and Serratia marcescens as well as the influence that these components displayed in the expression of these enzymes. For all microorganisms tested we found that in agar-BHI or yeast extract medium containing gelatin the sensitivity of proteinase detection was considerably greater than in BSA-agar or hemoglobin-agar. However, when BSA or hemoglobin were added to the culture medium, there was an increase in growth along with a marked reduction in the amount of proteinase production. In the case of M. luteus the incorporation of glycerol in BHI or yeast extract gelatin-agar induced protease liberation. Our results indicate that the technique described here is of value for detecting extracellular proteases directly in the culture medium, by means of a qualitative assay, simple, inexpensive, straight forward method to assess the presence of the proteolytic activity of a given microorganism colony with great freedom in substrate selection.

Development of genital plates in nymphs of Triatoma pallidipennis, Stål 1872, (Hemiptera: Reduviidae) and its application as sexing method

Searching for morphometric differences between sexes in immature forms, the development of genital plates in the exuviae of Triatoma pallidipennis Stål 1872nymphs was studied. Differences were found in the form and size of the 9th genital urosternite, it is larger and wider in males as compared to females. This difference is reported in several South American Triatoma species. From our results it is possible to sex early stages from microscopic observation of genital plates in whole insects.

Ferramenta computacional para dimensionamento de silo unicelular de concreto armado – parte I: silo de seção circular

Silos são construções que, em função de sua finalidade de utilização, estão sujeitos a carregamentos peculiares, tais como pressões horizontais e verticais - estáticas ou dinâmicas, dependendo da fase de operação - atrito nas paredes e cargas térmicas, todos causados pela presença do produto armazenado. Com o objetivo de sistematizar os procedimentos necessários para o dimensionamento de silos unicelulares de concreto armado, um programa computacional denominado SILOS foi desenvolvido, sendo composto por dois módulos: Módulo 1, para silos cilíndricos de seção circular e Módulo 2, para silos prismáticos de seção retangular. Neste artigo (Parte I), são apresentados os procedimentos que compõem o Módulo 1. O Módulo 2 será apresentado em artigo subsequente (Parte II). O programa foi desenvolvido na linguagem DELPHI e pode ser utilizado por profissionais e estudantes da área de Construções Rurais, independentemente da familiaridade do usuário com a linguagem computacional empregada.

Alterações morfométricas da musculatura dos músculos longitudinal e circular de ratos submetidos à criação de piloros no intestino delgado

OBJETIVO: Realizar um estudo morfométrico comparativo da musculatura longitudinal e circular do intestino delgado de ratos submetidos à construção cirúrgica de um e de dois piloros no intestino delgado utilizando-se da técnica de criação de piloros proposta por Rena et al. MÉTODO: Foram utilizados 52 ratos Wistar machos divididos em três grupos. O Grupo A, destacado como controle, composto de 10 animas, cada um forneceu 20mm de segmento de intestino para o estudo. Os animais do Grupo B, composto de 32 animais, foram submetidos à construção de dois piloros, um a 100mm e outro a 150mm da válvula ileocecal e os animais do grupo C, composto de 10 animais, foram submetidos à construção de um piloro a 100mm da mesma. A eutanásia ocorreu no décimo dia. A morfometria das camadas musculares longitudinal e circular acima e abaixo dos piloros foi estudada com utilização do microscópico modelo "Axiostar plus" conectado à câmera "Axioncam Version 5.05.10" com objetiva X5 / 0,12 no o programa "AxioVision 3.1.2.1". RESULTADOS: As alças apresentaram aumento da espessura da camada muscular acima e abaixo do ponto da operação. O estudo morfométrico comparativo das camadas musculares longitudinal e circular mostrou aumento significativo em comparação ao controle, não demonstrando significância entre os grupos B e C. CONCLUSÃO: Os resultados deste estudo revelaram importante aumento de espessura das camadas musculares, porém, menos acentuados que aqueles descritos na literatura quando foram realizados em animais submetidos à estenose fixa. Esses dados indicam que a construção operatória de piloros pela técnica utilizada promove alterações musculares de menor monta, possivelmente, pela função valvular do piloro.

Geometric nonlinear dynamic analysis of plates and shells using eight-node hexahedral finite elements with reduced integration

This work presents a geometric nonlinear dynamic analysis of plates and shells using eight-node hexahedral isoparametric elements. The main features of the present formulation are: (a) the element matrices are obtained using reduced integrations with hourglass control; (b) an explicit Taylor-Galerkin scheme is used to carry out the dynamic analysis, solving the corresponding equations of motion in terms of velocity components; (c) the Truesdell stress rate tensor is used; (d) the vector processor facilities existing in modern supercomputers were used. The results obtained are comparable with previous solutions in terms of accuracy and computational performance.

Pressure drop coefficients for elliptic and circular sections in one, two and three-row arrangements of plate fin and tube heat exchangers

The objective of the present work is the experimental determination of pressure drop coefficients (loss coefficients) for elliptic and circular sections in one, two and three-row arrangements of plate fin and tube heat exchangers. The experiments permitted to correlate the dimensionless loss coefficient with the flow Reynolds number in the rectangular channel formed by the plate fins. The experimental technique consisted of the measurement of the longitudinal pressure distribution along the flow channel, for several values of air mass flow rate. The total number of data runs, each one characterized by the flow Reynolds number, was 216. The present geometry is used in compact heat exchangers for air conditioning systems, heaters, radiators, and others. Also, it is verified the influence of the utilization of elliptic tubes, instead of circular ones, in the pressure drop. The measurements were performed for Reynolds numbers ranging from 200 to 1900.

Evaluation of the use of PetrifilmTM EB count plates for the enumeration of Enterobacteriaceae in poultry samples

A test that is rapid, simple, accurate, not expensive, gives rapid results, and is sensitive enough to detect low levels of microorganisms would be the most suitable for food industry routine laboratories, or even for a public health laboratories. A ready-to-use alternative, commercially available method is the PetrifilmTM EB method. The aim of this study was to evaluate whether there is a statistically significant difference between the conventional methods based on Violet Red Bile Glucose Agar and the alternative 3M TM Petrifilm (EB) method for the enumeration of Enterobacteriaceae in poultry carcasses. This study also assessed whether the alternative method showed ability to produce results that were directly proportional to the concentration of the target (approximately 270 colony-forming unit.mL-1). A total of 120 poultry carcasses samples showed a significant difference (p < 0.05) between the populations obtained by the two methods, and the conventional method showed low proportionality between the dilutions. On the other hand, the PetrifilmTM EB quantification system showed the capacity to produce results that are proportional to the concentration of the analyte in samples in the concentration range from 1 to 256 colony-forming unit.mL-1.

Causação circular do crescimento das economias em desenvolvimento: uma ponte entre as abordagens evolucionária e pós keynesiana

Based on the Post Keynesian approach and on the Evolutionary literature, this study seeks to demonstrate the causal relationships between the National Innovation System and the national and international financial systems. This study shows that there is a circular causation in the less developed economies that contributes to the immaturity of its National Innovation System and to its structural external vulnerability. Conclusions highlight that the cycles in the less developed economies mirror the cycles of international liquidity.