Effect of sugar and water contents on non-expanded cassava flour extrudates

The effects of sucrose and water contents on cassava flour processed by extrusion at varied concentrations of sucrose (0-20% w/w) and water (28-42% w/w) were studied by applying response surface methodology. The extrusion of the mixtures was performed in a twin screw extruder fitted to a torque rheometer. The specific mechanical energy (SME) dissipated inside a conical twin-screw extruder was measured. Water absorption index (WAI), water solubility index (WSI) and paste viscosity readings (cold viscosity (CV), peak viscosity (PV), breakdown (BD) and set back (SB)) during a gelatinization-retrogradation cycle measured in a Rapid Visco Analyzer were determined on non-directly extruded products. The results indicated that SME and WSI decreased as a function of water and sucrose contents. WAI and pasting properties were influenced by water content. A non antiplasticizing effect of the sucrose content was observed on pasting properties, suggesting that sucrose did not reduce the availability of water available for gelatinizing cassava flour during the extrusion process. The nature of the optimum point was characterized as a saddle point for WAI, WSI, PV and BD, whereas SME showed a maximum and CV and SB a minimum. The results indicated to be valuable for the production of non-expanded cassava flour extrudates with desirable functional properties for specific end users.

Stability of cassava flour-based food bars

The consumption of Brazilian cassava has been reduced due to a lack of adjustment to the modern lifestyle. To reverse this trend, new products could be developed specifically targeted to high-value niche markets. Cereal bars stand out as fast food high in nutritional value. A bar formula mimicking cereal bars was prepared using a mixture of Brazilian cassava flour, hydrogenated vegetable fat, dried bananas, ground cashew nuts, and glucose syrup. After being pressed, the bars were dried for 1 hour at 65 °C, packaged in films, and stored under ambient conditions. Its stability was continuously monitored for 210 days in order to ensure its safety and enable its introduction to the market. Texture loss was observed in the packed bars after 90 days of storage, but the sensory characteristics allowed the testers to perceive this tendency after only 30 days of storage. However, chemical, physical, and microbial analyses confirmed that the bars were safe for consumption for 180 days. The results showed that a 45 g cassava flour-based bar enriched with nuts and dried fruits can meet 6% of the recommended daily fiber intake with a caloric value between that of the common cereal bar and that of an energy bar. Adapting the formula with ingredients (fruits, nuts) from different regions of Brazil may add value to this traditional product as a fast food.

Extrusion of blends of cassava leaves and cassava flour: physical characteristics of extrudates

A cassava-based puffed snack was produced using a single screw extruder to determine the effect of the raw material composition (cassava leaf flour and moisture) and the process parameters (extrusion temperature and screw speed) on the physical characteristics of an extruded-expanded snack. A central composite rotational design, including four factors with 30 treatments, was used with the following as dependent variables: expansion index, specific volume, water solubility index, water absorption index, color (L*, a*, b*), and hardness. Under conditions of low moisture content (12 to 14%), low percentage of cassava leaf flour (2 to 4%), and intermediate conditions of extrusion temperature (100°C) and screw speed (230rpm), it was possible to obtain puffed snack products with desirable characteristics.

Changes in physical properties of extruded sour cassava starch and quinoa flour blend snacks

Given the broad acceptance of sour cassava starch biscuits in Brazil and the nutritional quality of quinoa flour, this study aimed to evaluate the effect of extrusion temperature, screw speed, moisture, and amount of quinoa flour on the physical properties of puffed snacks. Extrusion process was carried out using a single-screw extruder in a factorial central composite design with four factors. Effects of moisture and amount of quinoa flour on the expansion index and specific volume of snacks were observed. There was a pronounced increase in water solubility index of blends with the extrusion process with significant effects of all process parameters on the WSI. Higher water absorption index (WAI) was observed under high temperature, low moisture, and lower quinoa flour amount. Temperature and amount of quinoa flour influenced the color of the snacks. A positive quadratic effect of quinoa flour on hardness of products was observed. Blends of sour cassava starch and quinoa flour have good potential for use as raw material in production of extruded snacks with good physical properties.

Effects of processing on physical properties of extruded snacks with blends of sour cassava starch and flaxseed flour

The opportunity to supplement common cassava biscuits with a product of higher nutritional value meets consumer expectations. In this work it was studied the effects of process parameters and flaxseed addition on physical properties of expanded snacks. Extrusion process was carried out using a single screw extruder in a factorial central composite rotatable design with four factors: flaxseed flour percentage (0-20%), moisture (12-20%), extrusion temperature (90-130 °C) and screw speed (190-270). The effect of extrusion variables was investigated in terms of expansion index, specific volume, water absorption index, water solubility index, color parameters (L*, a* ,b*) and hardness. The data analysis showed that variable parameters of the extrusion process and flaxseed flour affected physical properties of puffed snacks. Among the experimental conditions used in the present study, expanded snack products with good physical properties can be obtained under the conditions of 10% flaxseed flour, 230 rpm screw speed, temperature of 90 °C and moisture of 12%.

Resistant starch in cassava products

Found in different foods, starch is the most important source of carbohydrates in the diet. Some factors present in starchy foods influence the rate at which the starch is hydrolyzed and absorbed in vivo. Due the importance of cassava products in Brazilian diet, the objective of this study was to analyze total starch, resistant starch, and digestible starch contents in commercial cassava products. Thirty three commercial cassava products from different brands, classifications, and origin were analyzed. The method used for determination of resistant starch consisted of an enzymatic process to calculate the final content of resistant starch considering the concentration of glucose released and analyzed. The results showed significant differences between the products. Among the flours and seasoned flours analyzed, the highest levels of resistant starch were observed in the flour from Bahia state (2.21%) and the seasoned flour from Paraná state (1.93%). Starch, tapioca, and sago showed levels of resistant starch ranging from 0.56 to 1.1%. The cassava products analyzed can be considered good sources of resistant starch; which make them beneficial products to the gastrointestinal tract.

Post-harvest conservation of organic strawberries coated with cassava starch and chitosan

The strawberry is as non-climacteric fruit, but has a high post-harvest respiration rate, which leads to a rapid deterioration at room temperature. This study aimed to evaluate the application of biodegradable coating on postharvest conservation of organic strawberries, cv. Camarosa, packed in plastic hinged boxes and stored at 10ºC. The treatments consisted of: a) control; b) 2% cassava starch; c) 1% chitosan; and d) 2% cassava starch + 1% chitosan. Physical and chemical characteristics of fruits were evaluated at 3, 6 and 9 days of storage, and microbiological and sensory analyses were carried out at the end of the storage period. The treatments influenced positively the post-harvest quality of organic strawberries. The coating cassava starch + chitosan provided the best results, with less than 6% of loss in fruit mass, lower counts of yeast and psychrophilic microorganisms and the best appearance according to the sensory analysis.

Correlation between grain nutritional content and pasting properties of pre-gelatinized red rice flour

As with any variety of rice, red rice characteristics are subject to varietal differences, growing conditions, types of processing, and nutritional and rheological properties. This study determined the nutritional characteristics (centesimal composition and minerals) and paste viscosity properties of raw grains of four red rice genotypes (Tradicional MNAPB0405, MNACE0501 and MNACH0501) and the paste viscosity properties of pre-gelatinized flours obtained at different cooking times (20, 30 and 40 min). The main nutritional properties were correlated with the pasting properties of the pre-gelatinized flours. The samples showed differences in nutritional properties and paste viscosity. MNAPB0405 and MNACE0501 showed higher levels of fiber and fat and provided higher caloric energy than Tradicional and MNACH0501, which, in turn, showed higher levels of amylose. MNACH0501 showed higher peak viscosity (2402 cP), higher breakdown viscosity (696 cP) and a greater tendency to retrogradation (1510 cP), while Tradicional, MNAPB0405 and MNACE0501 had pasting profiles with peak viscosities varying between 855 and 1093 cP, breaking viscosity below 85 cP and retrogradation tendency between 376 and 1206 cP. The factors genotype and cooking time influenced the rheological behavior of pre-gelatinized flours, decreasing their pasting properties. The protein and amylose levels are correlated with the pasting properties and can be used as indicators of these properties in different genotypes of red rice, whether raw or processed into pre-gelatinized flours.

Effect of plant-biostimulant on cassava initial growth

ABSTRACT Biostimulants are complex substances that promote hormonal balance in plants, favor the genetic potential expression, and enhance growth of shoots and root system. The use of these plant growth promoters in crops can increase quantitatively and qualitatively crop production. Therefore, the aim of this study was to evaluate the effect of a commercial biostimulant on the initial growth of cassava. The experiment was arranged in a 2 x 5 factorial design, corresponding to two cassava cultivars (Cacau-UFV and Coimbra) and five biostimulant concentrations (0, 4, 8, 12 and 16 mL L-1). At 90 days after planting, the characteristics leaf area, plant height, stem diameter, leaf number, total dry matter and dry matter of roots, stems and leaves were evaluated. The biostimulant promoted linear increases in plant height, leaf number, leaf area, total dry matter, dry matter of stems, leaves and roots. The cultivar Cacau-UFV had a higher growth rate than the cultivar Coimbra. The growth promoter stimulated the early growth of the cassava crop.

Dietary patterns in pregnancy and birth weight

OBJECTIVE To analyze if dietary patterns during the third gestational trimester are associated with birth weight.METHODS Longitudinal study conducted in the cities of Petropolis and Queimados, Rio de Janeiro (RJ), Southeastern Brazil, between 2007 and 2008. We analyzed data from the first and second follow-up wave of a prospective cohort. Food consumption of 1,298 pregnant women was assessed using a semi-quantitative questionnaire about food frequency. Dietary patterns were obtained by exploratory factor analysis, using the Varimax rotation method. We also applied the multivariate linear regression model to estimate the association between food consumption patterns and birth weight.RESULTS Four patterns of consumption – which explain 36.4% of the variability – were identified and divided as follows: (1) prudent pattern (milk, yogurt, cheese, fruit and fresh-fruit juice, cracker, and chicken/beef/fish/liver), which explained 14.9% of the consumption; (2) traditional pattern, consisting of beans, rice, vegetables, breads, butter/margarine and sugar, which explained 8.8% of the variation in consumption; (3) Western pattern (potato/cassava/yams, macaroni, flour/farofa/grits, pizza/hamburger/deep fried pastries, soft drinks/cool drinks and pork/sausages/egg), which accounts for 6.9% of the variance; and (4) snack pattern (sandwich cookie, salty snacks, chocolate, and chocolate drink mix), which explains 5.7% of the consumption variability. The snack dietary pattern was positively associated with birth weight (β = 56.64; p = 0.04) in pregnant adolescents.CONCLUSIONS For pregnant adolescents, the greater the adherence to snack pattern during pregnancy, the greater the baby’s birth weight.

Identification of duplicates of cassava accessions sampled on the North Region of Brazil using microsatellite markers

Duplicates are common in germplasm banks and their identification is needed to facilitate germplasm bank management and to reduce maintenance costs. The aim of this work was to identify duplicates of cassava from a germplasm bank in Eastern Amazon, which had been previously characterized both morphological and agronomically. In order to be genotyped with 15 microsatellite loci, 36 accessions were selected. These accessions were classified into 13 groups of similar morpho-agronomical characteristics. All loci were polymorphic, and 75 alleles were identified, with an average of five alleles per loci and H E = 0.66. There were determined 34 pairs of genotypes with identical multiloci profiles and the probability of genetic identity was 1.1x10-12 with probability of exclusion of 99.9999%. Among these duplicates, there are accessions sampled on different years and places, but with different names and accessions with the same name sampled in different places and years. The study identified genotypes that are grown in different places and that have been maintained over the years by local farmers.

The cassava mite complex: III - new distribution records, mainly from Colombia and Africa. References to other plants

Uma lista de novas referências e ocorrências para ácaros tetraniquídeos da mandioca é apresentada.

Leaf consumption and duration of instars of the cassava defoliator Erinnyis ello (L., 1758) (Lepidoptera, Sphingidae)

The objectives of this research were to evaluate leaf consumption and the developmental time of the larvae of Erynnyis ello (L., 1758) (Lepidoptera, Sphingidae) reared on cassava, in order to obtain information for the integrated management of this pest. The larvae were reared on excised cassava leaves in Petri dishes and later in gerbox, and kept in chambers at 24 ± 2 ºC and 75 ± 10% RH. The total leaf area consumed by the larva to complete its development was 589.67 cm²; each of the five instars consumed, respectively: 1.89 cm²; 5.74 cm²; 17.48 cm²; 76.66 cm²; and 487.90 cm². The consumption by the first three instars was insignificant, and did not reach 5% altogether; the 4th represented 13%; the 5th presented a consumption significantly higher, about 82.7%. The total time for the larval development was 22.61 days, and the duration for each of the five larval instar was, respectively: 4.35; 3.19; 3.32; 4.52; and 4.94 days. The pre-pupal period lasted 2.29 days. Since the highest consumption is by the 5th instar larva, the control should be applied before this age to avoid heavier damages to the cassava crop.

Bioactivity of Indonesian mahogany, Toona sureni (Blume) (Meliaceae), against the red flour beetle, Tribolium castaneum (Coleoptera, Tenebrionidae)

Bioactivity of Indonesian mahogany, Toona sureni (Blume) (Meliaceae), against the red flour beetle, Tribolium castaneum (Coleoptera, Tenebrionidae). The insecticidal activity of Toona sureni (Blume) Merr. was evaluated considering repellency, mortality and progeny production of F1 adults of Tribolium castaneum (Herbst, 1797) (Coleoptera, Tenebrionidae). Dried extract of seeds of T. sureni was dissolved in acetone to prepare solution of various concentrations (0.5, 1.0, 2.5 and 5.0%). To test for repellency, the insects were exposed to treated filter paper. Mortality of larvae, pupae and adults was evaluated by the treatment of spraying the insects with different concentrations of T. sureni extract. Residual effect of the extract was also evaluated considering the production of progeny of F1 adults. The highest repellency (93.30%) of T. castaneum occurred at the highest concentration (5.0% suspension of T. sureni); while the lowest (0.0%) repellency occurred at 0.5% suspension after 1 day of treatment. The highest mortality against adults (86.71%), larvae (88.32%) and pupae (85%) occurred at 5% suspension at 8 days after application. There was a negative correlation between the concentrations of T. sureni and the production of F1 adult's progeny of T. castaneum. The highest number of progeny (147) of T. castaneum occurred in the control at 7 days after treatment; and the lowest number of progeny (43) occurred at 5.0% concentration in 1 day after treatment. The results show that T. sureni is toxic to T. castaneum and has the potential to control all stages of this insect in stored wheat.

Occurrence and Structure of Arbuscular Mycorrhizal Fungal Communities in Cassava after Cultivation of Cover Crops as Observed by the “PCR-DGGE” Technique

ABSTRACT Cassava (Manihot esculenta Crantz) is a highly mycotrophic crop, and prior soil cover may affect the density of arbuscular mycorrhizal fungi (AMFs), as well as the composition of the AMFs community in the soil. The aim of this study was to evaluate the occurrence and the structure of AMFs communities in cassava grown after different cover crops, and the effect of the cover crop on mineral nutrition and cassava yield under an organic farming system. The occurrence and structure of the AMFs community was evaluated through polymerase chain reaction (PCR) and denaturing gradient gel electrophoresis (DGGE). A randomized block experimental design was used with four replications. Six different cover crop management systems before cassava were evaluated: black oats, vetch, oilseed radish, intercropped oats + vetch, intercropped oats + vetch + oilseed radish, plus a control (fallow) treatment mowed every 15 days. Oats as a single crop or oats intercropped with vetch or with oilseed radish increased AMFs inoculum potential in soil with a low number of propagules, thus benefiting mycorrhizal colonization of cassava root. The treatments did not affect the structure of AMFs communities in the soil since the AMFs communities were similar in cassava roots in succession to different cover crops. AMFs colonization was high despite high P availability in the soil. The cassava crop yield was above the regional average, and P levels in the leaves were adequate, regardless of which cover crop treatments were used. One cover crop cycle prior to the cassava crop was not enough to observe a significant response in variables, P in plant tissue, crop yield, and occurrence and structure of AMFs communities in the soil. In the cassava roots in succession, the plant developmental stage affected the groupings of the structure of the AMF community.