16 resultados para Carbon molecular sieve
em Scielo Saúde Pública - SP
Resumo:
In this work the preparation and characterization of a supported catalyst intended for degradation of reactive dyes by Fenton-like processes is described. The photocatalyst was prepared by immobilization of Fe3+ into the molecular sieve (4A type) surface and characterized by x-ray diffractometry and infrared, Mössbauer and EPR spectroscopy. The solid containing 0.94% (w/w) of ferric ions was used in degradation studies of aqueous reactive-dyes samples with really promissory results. Generally, Vis-assisted photochemical processes leads to almost total decolorization of all tested dyes at reaction times lower than 30 min. It was also observed that the iron-molecular sieve matrix can be reused.
Resumo:
Microporous molecular sieves of type Y, Beta, ZSM-5, ZSM-12 and ZSM-35, and mesoporous molecular sieves of type MCM-41 and MCM-48, and these sieves modified with triethanolamine and ethylenediamine were obtained and characterized by XRD, FTIR, TGA and nitrogen adsorption. The adsorption tests were performed by the gravimetric method under a stream of CO2 at ambient temperature and pressure. The adsorbents studied showed maximum adsorption capacity of carbon dioxide in the range of 13.1 to 85.5 mg of CO2 per gram of adsorbent.
Resumo:
Pyro and hydrometallurgical processes were applied to the treatment of spent commercial zeolites (a molecular sieve and a ZSM-5 sample). Both catalysts were employed in pilot plant units. They were kept in their original shape, they were not regenerated and were not subjected neither to mechanical stress nor to overheating zones during their time on-stream. Two recycling processes were tested: (i) direct solubilization of samples in mixtures of HF + H2O2 (60 ºC, 1 h). Although silicon was solubilized, insoluble matter was found in both samples, particularly in the molecular sieve, due to its high amounts of alkaline and alkaline-earth metals; (ii) fusion with KHSO4 (5 h, 600 ºC) with KHSO4/zeolite mass ratio 6:1. After fusion the solid was solubilized in water (100 ºC), leaving silicon as SiO2 residue. In both processes, solubilized metals were isolated by conventional selective precipitation techniques. Analysis of final products by common analytical methods shows that metals present in the original catalysts were recovered with very high yields except when the molecular sieve was treated with HF + H2O2. This reactant mixture proved to be suitable for processing zeolites with a low alkaline and alkaline-earth metal content whereas fusion with KHSO4 appeared to be adequate for all types of zeolites.
Resumo:
Carbon nanotubes are highly versatile materials; new applications using them are continuously being developed. Special attention is being dedicated to the possible use of multiwalled carbon nanotubes in biomaterials contacting with bone. However, carbon nanotubes are also controversial in regards to effects exerted on living organisms. Carbon nanotubes can be used to improve the tribological properties of polymer/composite materials. Ultrahigh molecular weight polyethylene (UHMWPE) is a polymer widely used in orthopedic applications that imply wear and particle generation. We describe here the response of human osteoblast-like MG63 cells after 6 days of culture in contact with artificially generated particles from both UHMWPE polymer and multiwalled carbon nanotubes (MWCNT)/UHMWPE nanocomposites. This novel composite has superior wear behavior, having thus the potential to reduce the number of revision hip arthroplasty surgeries required by wear failure of acetabular cups and diminish particle-induced osteolysis. The results of an in vitro study of viability and proliferation and interleukin-6 (IL-6) production suggest good cytocompatibility, similar to that of conventional UHMWPE (WST-1 assay results are reported as percentage of control ± SD: UHMWPE = 96.19 ± 7.92, MWCNT/UHMWPE = 97.92 ± 8.29%; total protein: control = 139.73 ± 10.78, UHMWPE = 137.07 ± 6.17, MWCNT/UHMWPE = 163.29 ± 11.81 µg/mL; IL-6: control = 90.93 ± 10.30, UHMWPE = 92.52 ± 11.02, MWCNT/UHMWPE = 108.99 ± 9.90 pg/mL). Standard cell culture conditions were considered as control. These results, especially the absence of significant elevation in the osteolysis inductor IL-6 values, reinforce the potential of this superior wear-resistant composite for future orthopedic applications, when compared to traditional UHMWPE.
Resumo:
ABSTRACT Soil organic matter (SOM) plays a key role in maintaining the productivity of tropical soils, providing energy and substrate for the biological activity and modifying the physical and chemical characteristics that ensure the maintenance of soil quality and the sustainability of ecosystems. This study assessed the medium-term effect (six years) of the application of five organic composts, produced by combining different agro-industrial residues, on accumulation and chemical characteristics of soil organic matter. Treatments were applied in a long-term experiment of organic management of mango (OMM) initiated in 2005 with a randomized block design with four replications. Two external areas, one with conventional mango cultivation (CMM) and the other a fragment of regenerating Caatinga vegetation (RCF), were used as reference areas. Soil samples were collected in the three management systems from the 0.00-0.05, 0.05-0.10, and 0.10-0.20 m layers, and the total organic carbon content and chemical fractions of organic matter were evaluated by determining the C contents of humin and humic and fulvic acids. Organic compost application significantly increased the contents of total C and C in humic substances in the experimental plots, mainly in the surface layer. However, compost 3 (50 % coconut bagasse, 40 % goat manure, 10 % castor bean residues) significantly increased the level of the non-humic fraction, probably due to the higher contents of recalcitrant material in the initial composition. The highest increases from application of the composts were in the humin, followed by the fulvic fraction. Compost application increased the proportion of higher molecular weight components, indicating higher stability of the organic matter.
Resumo:
The objective of this work was to determine the contribution of dissolved organic carbon (DOC) from a biochar mineral complex (BMC), so as to better understand the interactions between DOC, biochar, clay, and minerals during thermal treatment, and the effects of BMC on amended soils. The BMC was prepared by heating a mixture of a H3PO4-treated saligna biochar from Acacia saligna, clays, other minerals, and chicken manure. The BMC was applied to a sandy loam soil in Western Australia, where wheat was grown. Liquid chromatography-organic carbon detection (LC-OCD) tests were carried out on water extracts from the untreated biochar, the BMC, the BMC-amended soil, and on a control soil to measure the DOC concentration. LC-OCD tests provide a fingerprint of the DOC, which allows the fractions of DOC to be determined. Thermal processing enhanced the reaction of the A. saligna biochar with manure, clays and minerals, and affected the distribution of the DOC fractions. Notably, the process leads to immobilization of hydrophobic DOC and to an increase in the concentration of low-molecular-weight neutrals in the BMC. The application of the BMC to soil increases the DOC in the amended soil, especially the biopolymer fraction.
Resumo:
The objective of this work was to characterize the morphology and molecular composition of the hydrochar produced by microwave-assisted hydrothermal carbonization of cellulose. The produced hydrochar consists mainly of aggregate microspheres with about 2.0 µm in diameter, with aliphatic and aromatic structures and the presence of carbonyl functional groups. The aromatic groups are formed mainly by benzofuran-like structures, being chemically different from common cellulose char. Microwave-assisted hydrothermal carbonization yields a functionalized carbon-rich material similar to that produced by the conventional hydrothermal process.
Resumo:
Aproximadamente 1/1000 recém-nascidos apresentam deficiência auditiva congênita, sendo 60% dessas de etiologia genética. Na maioria dos casos, a deficiência auditiva é uma doença multifatorial causada por ambos os fatores, genéticos e ambientais. A genética molecular da deficiência auditiva tem apresentado grandes avanços na última década, pois os genes responsáveis pela deficiência auditiva hereditária vêm sendo progressivamente mapeados e clonados. Esta revisão enfatiza a deficiência auditiva não-sindrômica, uma vez que, os genes envolvidos nesse tipo de deficiência foram identificados recentemente.
Resumo:
OBJETIVOS: recentes progressos obtidos na biologia molecular vêm possibilitando a identificação da etiologia da surdez. A alta prevalência de mutações no gene da conexina 26 e sua facilidade de estudo possibilitam o diagnóstico. A mutação mais freqüente neste gene é a chamada 35delG. O objetivo do presente trabalho foi averiguar a incidência da mutação 35delG em crianças candidatas e submetidas ao implante coclear que tiveram a surdez diagnosticada como, supostamente idiopática. MATERIAL E MÉTODO: Estudo realizado no Setor de Implantes Cocleares da Disciplina de Otorrinolaringologia e no Laboratório Genética Humana-CBMEG, UNICAMP-SP. Foram avaliadas 32 crianças candidatas e usuárias de implante coclear, apresentando perda auditiva neurossensorial severa a profunda bilateral. Para a detecção da mutação 35delG foi utilizada a técnica de PCR alelo-específico (AS-PCR), usando primers e reação em cadeia da polimerase. RESULTADOS: 69% apresentaram exame normal, 12% foram homozigotos e 19% dos casos foram heterozigotos. A mutação 35delG em heterozigose não diagnostica a causa da surdez apenas comprova que o paciente é portador dessa mutação. CONCLUSÃO: No presente estudo, os dados obtidos confirmaram a alta prevalência da mutação 35delG no gene GJB2 em casos de perda auditiva neurossensorial não-sindrômica bilateral profunda, resultado que concorda com a literatura. Foi possível, também, diagnosticar como genética a causa da surdez em uma parcela significativa de crianças. Estes dados reforçam a importância do estudo molecular em pacientes com surdez de origem supostamente idiopática, uma vez que esse exame possibilita esclarecer a etiologia da perda auditiva.
Resumo:
A deficiência auditiva como déficit sensorial mais comum tem dentre suas diferentes etiologias as alterações genéticas. Assim, é importante que a investigação audiológica se associe à busca do diagnóstico etiológico. OBJETIVO: Relatar o perfil audiológico e genético de três irmãos portadores de deficiência auditiva neurossensorial não-sindrômica. MATERIAL E MÉTODO: Estudo de caso de três irmãos, do sexo masculino, com 3, 5 e 16 anos, respectivamente, submetidos à avaliação audiológica comportamental e eletrofisiológica, e estudo molecular. RESULTADOS: Os achados audiológicos mostraram: audiometria do tipo neurossensorial, bilateral, simétrica, de grau moderado a moderadamente severo e configuração descendente acentuada. EOAT e EOAPD ausentes nos dois irmãos mais novos. PEATE compatível com perda auditiva moderadamente severa a severa. Presença do P300 com latências dentro da normalidade bilateralmente no irmão mais velho. Os achados do exame molecular mostraram que as duas crianças mais novas eram heterozigotos para a mutação 35delG no gene GJB2 e o mais velho não apresentava essa mutação. CONCLUSÃO: A associação das avaliações fonoaudiológicas e genéticas permite o diagnóstico etiológico de perdas auditivas que à primeira vista são semelhantes, mas que não obedecem à mesma estrutura genética. Os estudos moleculares devem ser abrangentes, evitando diagnósticos precipitados que prejudiquem o aconselhamento genético.
Chinese energy policy progress and challenges in the transition to low carbon development, 2006-2013
Resumo:
If the world is not to jeopardize the chances for human life on Earth, climate change must be mitigated; therefore, achieving low carbon development is crucial. China is the world's greatest GHG emitter, energy producer and energy consumer; investigating its energy-climate policy developments and international positions are of utmost importance to understand and tackle current stumbling blocks of the global energy and climate governance.
Resumo:
ABSTRACTAiming to compare three different methods for the determination of organic carbon (OC) in the soil and fractions of humic substances, seventeen Brazilian soil samples of different classes and textures were evaluated. Amounts of OC in the soil samples and the humic fractions were measured by the dichromate-oxidation method, with and without external heating in a digestion block at 130 °C for 30 min; by the loss-on-ignition method at 450 °C during 5 h and at 600 °C during 6 h; and by the dry combustion method. Dry combustion was used as reference in order to measure the efficiency of the other methods. Soil OC measured by the dichromate-oxidation method with external heating had the highest efficiency and the best results comparing to the reference method. When external heating was not used, the mean recovery efficiency dropped to 71%. The amount of OC was overestimated by the loss-on-ignition methods. Regression equations obtained between total OC contents of the reference method and those of the other methods showed relatively good adjustment, but all intercepts were different from zero (p < 0.01), which suggests that more accuracy can be obtained using not one single correction factor, but considering also the intercept. The Walkley-Black method underestimated the OC contents of the humic fractions, which was associated with the partial oxidation of the humin fraction. Better results were obtained when external heating was used. For the organic matter fractions, the OC in the humic and fulvic acid fractions can be determined without external heating if the reference method is not available, but the humin fraction requires the external heating.
Resumo:
ABSTRACT Soils of tropical regions are more weathered and in need of conservation managements to maintain and improve the quality of its components. The objective of this study was to evaluate the availability of K, the organic matter content and the stock of total carbon of an Argisol after vinasse application and manual and mechanized harvesting of burnt and raw sugarcane, in western São Paulo.The data collection was done in the 2012/2013 harvest, in a bioenergy company in Presidente Prudente/SP. The research was arranged out following a split-plot scheme in a 5x5 factorial design, characterized by four management systems: without vinasse application and harvest without burning; with vinasse application and harvest without burning; with vinasse application and harvest after burning; without vinasse application and harvest after burning; plus native forest, and five soil sampling depths (0-10 10-20, 20-30, 30-40, 40-50 cm), with four replications. In each treatment, the K content in the soil and accumulated in the remaining dry biomass in the area, the levels of organic matter, organic carbon and soil carbon stock were determined. The mean values were compared by Tukey test. The vinasse application associated with the harvest without burning increased the K content in soil layers up to 40 cm deep. The managements without vinasse application and manual harvest after burning, and without vinasse application with mechanical harvesting without burning did not increase the levels of organic matter, organic carbon and stock of total soil organic carbon, while the vinasse application and harvest after burning and without burning increased the levels of these attributes in the depth of 0-10 cm.
Resumo:
OBJETIVO: Verificar a associação entre fatores epidemiológicos e infecção genital pelo papilomavírus humano (HPV). MÉTODOS: Realizou-se estudo transversal com 975 mulheres atendidas em um serviço público de rastreamento para o câncer cervical, em Porto Alegre, Brasil. As mulheres foram consideradas infectadas pelo HPV quando apresentaram o teste de DNA positivo para esse vírus, tanto pelo método de captura híbrida II (CH II) como pelo método de reação em cadeia da polimerase (PCR). Mulheres infectadas pelo HPV foram comparadas com mulheres não infectadas oriundas da mesma população. RESULTADOS: Foram estudadas 975 mulheres. A prevalência observada de HPV (pela combinação dos métodos de DNA) foi de 27%. Quando a análise de cada método de DNA foi feito isoladamente, a prevalência de HPV-DNA foi de 15% para a CH II e de 16% para PCR. Regressão logística múltipla incondicional foi utilizada na identificação dos fatores associados à infecção pelo HPV. Foi encontrada associação positiva com as seguintes variáveis: anos de escolaridade (11 anos: OR=2,05; IC95%=1,31; 3,20; referência: até oito anos de escolaridade); ser casada (OR=1,69; IC95%=0,78; 2,00; referência: ser solteira); parceiros sexuais ao longo da vida (dois parceiros: OR=1,67; IC95%=1,01; 2,77; quatro ou mais: OR=2,18; IC95%=1,15; 4,13; referência: um parceiro); idade da primeira relação sexual (15-16 anos: OR=4,05; IC95%=0,89; 18,29; referência: > ou = 22 anos). CONCLUSÕES: Vários fatores parecem estar associados à presença de infecção genital pelo HPV, especialmente aqueles referentes ao comportamento sexual (idade da primeira relação sexual, número de parceiros sexuais ao longo da vida e estado marital) e aqueles relacionados à situação socioeconômica (escolaridade).