BIOFILM FORMATION OF Vibrio cholerae ON STAINLESS STEEL USED IN FOOD PROCESSING

Vibrio cholerae represents a significant threat to human health in developing countries. This pathogen forms biofilms which favors its attachment to surfaces and its survival and transmission by water or food. This work evaluated the in vitro biofilm formation of V. cholerae isolated from clinical and environmental sources on stainless steel of the type used in food processing by using the environmental scanning electron microscopy (ESEM). Results showed no cell adhesion at 4 h and scarce surface colonization at 24 h. Biofilms from the environmental strain were observed at 48 h with high cellular aggregations embedded in Vibrio exopolysaccharide (VPS), while less confluence and VPS production with microcolonies of elongated cells were observed in biofilms produced by the clinical strain. At 96 h the biofilms of the environmental strain were released from the surface leaving coccoid cells and residual structures, whereas biofilms of the clinical strain formed highly organized structures such as channels, mushroom-like and pillars. This is the first study that has shown the in vitro ability of V. cholerae to colonize and form biofilms on stainless steel used in food processing.

Avaliação do monitor de medida de pressão arterial 0mron 705-CP para uso em adolescentes e adultos jovens

OBJETIVO: Avaliar o monitor OMRON 705-CP de medida de pressão arterial em adolescentes e adultos jovens. MÉTODOS: De acordo com o protocolo da British Hypertension Society e da Association for the Advancement of Medical Instrumentation, realizamos a validação do aparelho em 60 adolescentes. O monitor foi conectado em Y com a coluna de mercúrio e foram realizadas 4 medidas consecutivas e simultâneas, analisadas as independentes e calculadas as diferenças médias entre as pressões e o desvio padrão dessas diferenças. Os resultados foram analisados de acordo com o sistema de grau do protocolo utilizado. RESULTADOS: Foram avaliadas 240 medidas. A idade média dos pacientes foi 16,3 anos. Quando comparada a medida realizada pela coluna de mercúrio com o aparelho houve uma diferença < 15 mmHg em 97,9% das medidas sistólicas e 98,8% das diastólicas; uma diferença < 10 mmHg em 86,3% das medidas sistólicas e 90,4% das diastólicas, classificada como grau A; uma diferença < 5 mmHg em 59,1% das medidas sistólicas e 67% das medidas diastólicas, considerada pela classificação entre A/B. A diferença média e o desvio padrão dessa diferença na pressão sistólica foi de 2,91±6,42 mmHg e para a diastólica de 1,16±5,79 mmHg. CONCLUSÃO: O monitor OMRON 705-CP mostrou-se válido para medidas de pressão arterial de adolescentes segundo o protocolo empregado.

Precisão do aparelho Omron HEM-705 CP na medida de pressão arterial em grandes estudos epidemiológicos

FUNDAMENTO: A medida precisa da pressão arterial (PA) é de grande importância na pesquisa da hipertensão. No contexto de estudos clínicos e epidemiológicos, dispositivos oscilométricos frequentemente oferecem importantes vantagens para superar algumas das limitações do método auscultatório. Embora sua acurácia tenha sido avaliada em estudos múltiplos no ambiente clínico, há pouca evidência de seu desempenho em grandes estudos epidemiológicos. OBJETIVO: Avaliamos a precisão do Omron HEM-705-CP, um dispositivo automático para medida de PA, quando comparado com o método padrão auscultatório com esfigmomanômetro de mercúrio em um grande estudo de coorte. MÉTODOS: Três medidas auscultatórias foram obtidas, seguidas por duas mensurações com o dispositivo Omron em 1.084 indivíduos. O viés foi estimado como a média de duas medidas pelo dispositivo Omron menos a média das duas últimas medidas auscultatórias, com seus correspondentes limites de concordância (LC) de 95%. RESULTADOS: O dispositivo Omron superestimou a pressão arterial sistólica (PAS) por 1,8 mmHg (LC:-10,1, 13,7) e subestimou a pressão arterial diastólica (PAD) por 1,6 mmHg (LC:-12,3, 9,2). O viés foi significantemente maior em homens. O viés na PAS aumentou com a idade e diminuiu com o nível da PA, enquanto o viés na PAD diminuiu com a idade e aumentou com o nível da PA. A sensibilidade e a especificidade do dispositivo Omron para detectar hipertensão foram 88,2% e 98,6%, respectivamente. O uso das medidas do dispositivo Omron resultou em viés mínimo na estimativa dos efeitos de vários fatores. CONCLUSÃO: Nossos resultados demonstraram que o dispositivo Omron HEM-705-CP pode ser utilizado para medir a PA em grandes estudos epidemiológicos sem comprometer a validade do estudo ou sua precisão.

Fitotoxicidade do herbicida CP. 50 144 para Sesamun indicum L. e Phaseolus vulgaris L. cultivados em soluções nutritivas

O presente trabalho relata um experimento em que foram verificados os efeitos fitotóxicos do herbicida 2-cloro-2', 6'-dietil-N-(metoximetil) acetanilida (CP 50144) em plántulas de gergelim (Sesamun indicum L.) e feijão (Phaseolus vulgaris L.), cultivados em solução nutritiva 0,5-Hoagland. 0 herbicida foi aplicado às folhas, nas doses respectivas de lug/10l, 5ug/ 10l, 25yg/10l, 125ug/10l, 250yg/10l e 500ug/10l. Para o tratamento às raízes, ele foi adicionado à solução nutritiva, nas doses de 1 ppm, 5 ppm, 25 ppm, 125 ppm, 625 ppm e 3125 ppm, respectivamente. O tratamento foliar revelou penetração lenta, tanto nas fôlhas de gergelim como nas de feijão, com pequena translocação e forte ação de contato, especialmente nas concentrações mais elevadas, superiores à da saturação (148 ppm). A absorção pelas raízes e lenta, tanto para o gergelim como para o feijão. Entretanto, o gergelim mostrou-se altamente tolerante ao CP 50144, até a concentração de 125 ppm, inclusive, não tendo demonstrado nenhum sintoma de injuria. Acima dessa concentração, o gergelim foi fortemente injuriado, tendo mostrado fortes sintomas de ação de contato, nas raízes, e sintomas gerais de intoxicação, na parte aerea, que levaram as plantas a morte. O feijão mostrou-se bastante sensível à ação do CP 50144, tendo apresentado forte sintomatologia de intoxicação, tanto por contato como por translocação apoplástica. São descritos os sintomas de fitotoxicidade do herbicida, para as duas plantas. O herbicida CP 50144 e altamente seletivo para o gergelim, mostrando-se bastante promissor para essa cultura. O herbicida mostrou ação inibidora da distensão celular, nas folhas novas de feijão. É interessante que se realizem estudos fitoteratológicos e fitofisiológicos com este herbicida, cujo modo de ação ainda nao e bem conhecido.

Avaliação de características de ácidos húmicos de resíduos de origem urbana: I. métodos espectroscópicos (UV-Vis, IV, RMN 13C-CP/MAS) e microscopia eletrônica de varredura

Foram caracterizados fisico-quimicamente ácidos húmicos, obtidos de composto de resíduos sólidos urbanos (AH-CRSU) e de lodo de estação de tratamento de esgoto (AH-LETE), ambos produzidos na cidade do Rio de Janeiro, por meio da análise da composição elementar, acidez total, de dados espectroscópicos (UV-Vis; IV, RMN de 13C-CP/MAS) e microscopia eletrônica de varredura (MEV). A análise das características estruturais revelou diferenças entre os AHs estudados. A presença de sistemas aromáticos foi observada por meio da espectroscopia de UV-Vis, indicando sistemas mais substituídos nos AH-LETE. A espectroscopia na região do infravermelho (IV) mostrou a presença de estruturas alifáticas nos AHs e maior complexidade nos sinais de absorção devida a polissacarídeos nos AH-CRSU. Além disso, foram observados grupos OH, COOH, COO-, CO2NH2, e confirmada a presença de sistemas aromáticos. Com a análise de RMN de 13C-CP/MAS, foi possível verificar as diferenças quantitativas nos diferentes tipos de carbono. Os AH-LETE apresentaram maior quantidade de grupos aromáticos e de COOH. A análise de RMN de 13C-CP/MAS também mostrou presença de polissacarídeos, N em aminoácidos e grupamentos OCH3. O conjunto de propriedades avaliadas permitiu indicar que a fração ácidos húmicos dos resíduos é "do tipo" ou "análoga" aos ácidos húmicos de origem pedogênica.

Use of steel slag to neutralize acid mine drainage (AMD) in sulfidic material from a uranium mine

Acid Mine Drainage (AMD) is one of the main environmental impacts caused by mining. Thus, innovative mitigation strategies should be exploited, to neutralize acidity and prevent mobilization of trace elements in AMD. The use of industrial byproducts has been considered an economically and environmentally effective alternative to remediate acid mine drainage. Therefore, the objective of this study was to evaluate the use of steel slag to mitigate acid mine drainage in a sulfidic material from a uranium mine, as an alternative to the use of limestone. Thus, increasing doses of two neutralizing agents were applied to a sulfidic material from the uranium mine Osamu Utsumi in Caldas, Minas Gerais State. A steel slag from the company ArcelorMittal Tubarão and a commercial limestone were used as neutralizing agents. The experiment was conducted in leaching columns, arranged in a completely randomized, [(2 x 3) + 1] factorial design, consisting of two neutralizing agents, three doses and one control, in three replications, totaling 21 experimental units. Electrical conductivity (EC), pH and the concentrations of Al, As, Ca, Cd, Cu, Fe, Mn, Ni, S, Se, and Zn were evaluated in the leached solutions. The trace element concentration was evaluated by ICP-OES. Furthermore, the CO2 emission was measured at the top of the leaching columns by capturing in NaOH solution and titration with HCl, in the presence of BaCl2. An increase in the pH of the leachate was observed for both neutralizing agents, with slightly higher values for steel slag. The EC was lower at the higher lime dose at an early stage of the experiment, and CO2 emission was greater with the use of limestone compared to steel slag. A decrease in trace element mobilization in the presence of both neutralizing agents was also observed. Therefore, the results showed that the use of steel slag is a suitable alternative to mitigate AMD, with the advantage of reducing CO2 emissions to the atmosphere compared to limestone.

Sequence similarity between the viral cp gene and the transgene in transgenic papayas

The Papaya ringspot virus (PRSV) coat protein transgene present in 'Rainbow' and 'SunUp' papayas disclose high sequence similarity (>89%) to the cp gene from PRSV BR and TH. Despite this, both isolates are able to break down the resistance in 'Rainbow', while only the latter is able to do so in 'SunUp'. The objective of this work was to evaluate the degree of sequence similarity between the cp gene in the challenge isolate and the cp transgene in transgenic papayas resistant to PRSV. The production of a hybrid virus containing the genome backbone of PRSV HA up to the Apa I site in the NIb gene, and downstream from there, the sequence of PRSV TH was undertaken. This hybrid virus, PRSV HA/TH, was obtained and used to challenge 'Rainbow', 'SunUp', and an R2 population derived from line 63-1, all resistant to PRSV HA. PRSV HA/TH broke down the resistance in both papaya varieties and in the 63-1 population, demonstrating that sequence similarity is a major factor in the mechanism of resistance used by transgenic papayas expressing the cp gene. A comparative analysis of the cp gene present in line 55-1 and 63-1-derived transgenic plants and in PRSV HA, BR, and TH was also performed.

Reações de Cp'(CO)2MnPPH2H com CH3COCl e CH3S(O)2Cl em THF/trietilamina: evidências da primeira estabilização por complexação de um fósforo-homólogo das sulfonamidas

Cp'Mn(CO)3 (Cp'=h5-C5H4-CH 3) reacts with P(C6H5)2H in THF to give Cp'(CO)2MnPPh2H (Ph = Phenyl) (1), by substitution of one CO ligand. The reaction of 1 with CH3COCl and CH3S(O)2Cl in the presence of triethylamine occurs under electrophilic substitution on the diphenylphosphan ligand to yield the acetyl- and sulfonylphosphane complexes of manganese(I) Cp'(CO)2MnPPh2COCH3 (2) and Cp'(CO)2MnPPh2S(O)2 CH3 (3). The complex stabilisation of these molecules, wich are hitherto unknown in the free state, is only accomplished by blocking the free electron pair on phosphorus by coordination. The new complexes 1, 2 and 3 were analysed by IR, ¹H-NMR and 31P-MNR spectroscopy and their similar structures are discusssed.

Anéis aromáticos condensados e relação E4/E6: estudo de ácidos húmicos de gleissolos por RMN de 13C no estado sólido utilizando a técnica CP/MAS desacoplamento defasado

In this work, seven samples of humic acids extracted from gleysoils were investigated. These studies, using NMR CP/MAS 13C techniques, did not show significant correlation between the E4/E6 ratio and the degree of aromaticity. However, dipolar dephasing (DD) measurements of condensed aromatic or substituted carbons showed a negative correlation of 0.94. Also, there was a good correlation between the amount of semiquinone free radicals measured by the EPR technique and condensed aromatic rings measured by NMR CP/MAS 13C with the DD technique. The content of semiquinone free radicals was quantified by EPR spectroscopy and was correlated with the humification (degree of aromaticity) of the humic substances. The results indicated that the E4/E6 ratio identifies the degree of aromatic rings condensation. It was also found that the degree of aromaticity, measured by NMR, as frequently presented in the literature (by conventional CP/MAS), underestimates aromatic rings in condensed structures.

Biomateriais: deposição de hidroxiapatita sobre superfície de Ti-cp modificada por aspersão térmica

The osseointegrated titanium implants are reliable and safe alternatives to treatments for long periods of time. For surface modification, thermal aspersion of TiO2 was used. The samples with and without TiO2 were treated with NaOH and SBF in order to obtain a layer of HA. Characterization was done by SEM and FTIR. The images of HA obtained by SEM show a uniform morphology and a porous structure with spherical particles. The IR spectra show that the surface of Ticp/ TiO2 is more favorable for the HA deposit, as can be seen by the increase of the crystalline structure and the very intense and defined bands of the OH group of HA that is verified about 3571 and 630 cm-1. Thus the Ticp/ TiO2 surface presents a satisfactory nucleation of HA when compared to Ticp.

Corrosion of steel reinforced concrete in the tropical coastal atmosphere of Havana City, Cuba

The influence of chloride deposition rate on concrete using an atmospheric corrosion approach is rarely studied in the literature. Seven exposure sites were selected in Havana City, Cuba, for exposure of reinforced concrete samples. Two significantly different atmospheric corrosivity levels with respect to corrosion of steel reinforced concrete were observed after two years of exposure depending on atmospheric chloride deposition and w/c ratio of the concrete. Changes in corrosion current are related to changes in chloride penetration and chloride atmospheric deposition. The influence of sulphur compound deposition could also be a parameter to consider in atmospheric corrosion of steel reinforced concrete.

A study on the inhibition of mild steel corrosion in hydrochloric acid by pyridoxol hydrochloride

The inhibition of the corrosion of mild steel in 2M hydrochloric acid solutions by Pyridoxol hydrochloride (PXO) has been studied using weight loss and hydrogen evolution techniques. The inhibitor (PXO) exhibited highest inhibition efficiency of 71.93% at the highest inhibitor concentration of 1.0 x 10-2M investigated and a temperature of 303K from weight loss result. Also, inhibition was found to increase with increasing concentration of the inhibitor and decreasing temperature. A first order type of mechanism has been deduced from the kinetic treatment of the weight loss results and the process of inhibition attributed to physical adsorption. The results obtained from the two techniques show that pyridoxol hydrochloride could serve as an effective inhibitor of the corrosion of mild steel in HCl acid solution. The compound obeys the Langmuir adsorption isotherm equation.

Fracture modes and acoustic emission characteristics of hydrogen-assisted cracking in high-strength low-alloy steel weldment

The aim of the present paper is to study the relationship between the fracture modes in hydrogen-assisted cracking (HAC) in microalloied steel and the emission of acoustic signals during the fracturing process. For this reason, a flux-cored arc weld (FCAW) was used in a high-strength low-alloy steel. The consumable used were the commercially available AWS E120T5-K4 and had a diameter of 1.6 mm. Two different shielding gases were used (CO2 and CO2+5% H2) to obtain complete phenomenon characterization. The implant test was applied with three levels of restriction stresses. An acoustic emission measurement system (AEMS) was coupled to the implant test apparatus. The output signal from the acoustic emission sensor was passed through an electronic amplifier and processed by a root mean square (RMS) voltage converter. Fracture surfaces were examined by scanning electron microscopy (SEM) and image analysis. Fracture modes were related with the intensity, the energy and the number of the peaks of the acoustic emission signal. The shielding gas CO2+5% H2 proved to be very useful in the experiments. Basically, three different fracture modes were identified in terms of fracture appearance: microvoid coalescence (MVC), intergranular (IG) and quasi-cleavage (QC). The results show that each mode of fracture presents a characteristic acoustic signal.

An Inspection System to Identify Fatigue Damage on Steel-Bridge Structures

Crack formation and growth in steel bridge structural elements may be due to loading oscillations. The welded elements are liable to internal discontinuities along welded joints and sensible to stress variations. The evaluation of the remaining life of a bridge is needed to make cost-effective decisions regarding inspection, repair, rehabilitation, and replacement. A steel beam model has been proposed to simulate crack openings due to cyclic loads. Two possible alternatives have been considered to model crack propagation, which the initial phase is based on the linear fracture mechanics. Then, the model is extended to take into account the elastoplastic fracture mechanic concepts. The natural frequency changes are directly related to moment of inertia variation and consequently to a reduction in the flexural stiffness of a steel beam. Thus, it is possible to adopt a nondestructive technique during steel bridge inspection to quantify the structure eigenvalue variation that will be used to localize the grown fracture. A damage detection algorithm is developed for the proposed model and the numerical results are compared with the solutions achieved by using another well know computer code.

The adherence of Pseudomonas fluorescens to marble, granite, synthetic polymers, and stainless steel

The adherence of Pseudomonas fluorescens cells to nine food-processing contact surfaces was evaluated using the plate-count method. The surfaces include marble, granite, stainless steel, polyvinyl chloride, polyurethane, and silicone-coated cloth, which have been used only in a few studies concerning bacterial adherence. The number of cells adhered to the surfaces increased with contact time reaching 5.0-6.1 log CDM.cm-2 after 10 hours, which can be considered a well established adherence process. The number of adhered cells doubled in 29.5 minutes and 23.5 minutes on stainless steel and thin polyvinyl chloride-coated cloth, respectively. For the other surfaces, this value was 9.8 minutes on average. Marble, granite, thick polyvinyl-coated cloth, double-faced rugous polyurethane, and silicone-coated cloth were not different (p < 0.05) in their ability to adhere cells (CFU/cm²) after 2 and 10 hours. The surfaces that had higher percentage of similarity in the adhesion level and higher log CFU/cm² of adhered cells were double-faced rugous polyurethane, silicone-coated cloth, and granite. The surfaces showed very different microtopography characteristics when viewed using scanning electron microscopy. This experiment showed the importance of using appropriate materials for food contact during processing, which will affect the cleaning and sanitation procedures.