Adaptação no método do peso da gota para determinação da tensão superficial: um método simplificado para a quantificação da CMC de surfactantes no ensino da química

The discussion based on surfactant cleaning action is commonly used in chemistry classrooms for the comprehension of theoretical concepts related to surface tension and micelle formation. The experimental quantification of surface tension of aqueous solutions of surfactants provides the practical instruments for this discussion. The present paper describes a simplification on the common apparatus employed for the drop-weight method, making the determination of surface tension accessible to any chemistry lab. The surface tension of various liquids and the critical micelle concentration, CMC, of three commercial surfactants were measured with this modified method, and proved to be consistent with literature values.

O EcoDopplercardiograma na doença hepática crônica: revisão sistemática

FUNDAMENTO: O ecoDopplecardiograma (Eco) tem-se firmado como método não invasivo de excelente acurácia no rastreio de hipertensão portopulmonar (HPP) e pesquisa dos shunts intrapulmonares (SIP) na doença hepática crônica (DHC). Nesta última década, concretizou-se o Eco como de fundamental importância no diagnóstico da cardiomiopatia cirrótica (CMC). OBJETIVO: Realizar uma revisão sistemática envolvendo artigos relevantes sobre a temática: o Eco na DHC. MÉTODOS: Em novembro de 2011, realizou-se uma revisão sistemática a partir das bases de dados da Pubmed, LILACS e SciELO, sendo relatadas as características dos estudos selecionados. RESULTADOS: Foram encontrados 204 artigos a partir da busca de descritores e um termo livre, sendo 179 da Pubmed, 21 da LILACS e 01 da SciELO. Destes, foram selecionados 22 artigos para revisão sistemática, não sendo possível, pois, fazer uma meta-análise devido à heterogeneidade dos mesmos. CONCLUSÃO: O Eco deve fazer parte da estratificação da DHC para o rastreio de HPP, SIP e da CMC, já que a maioria das vezes, o diagnóstico dessas complicações ocorre nos pacientes na fila de transplante hepático.

Recuperação de proteínas do soro de leite por meio de coacervação com polissacarídeo

O objetivo deste trabalho foi recuperar e fracionar as proteínas do soro de leite por meio da técnica de coacervação, utilizando o polissacarídeo carboximetilcelulose sódica (CMC). O soro de leite foi obtido da fabricação industrial do queijo tipo frescal. Foram estudados concentrações do polímero (0,1% a 0,9% CMC p/v) e valores de pH, a fim de se obter uma precipitação seletiva das proteínas do soro de leite, sendo as condições otimizadas para produção em piloto. Mediante ajuste gradual, foi possível obter, no pH 3, uma precipitação das proteínas totais (PT/CMC); no pH 4, da beta-lactoglobulina (beta-Lg/CMC) e, no pH 3,2, a maior proporção de alfa-lactoalbumina (alfa-La/CMC). Os coacervados foram separados, por aplicação de força centrífuga, e caracterizados em relação à composição centesimal e perfil eletroforético. O maior rendimento foi verificado no fracionamento da beta-lactoglobulina, com 86% de recuperação dessa classe de proteínas do soro desnatado. O coacervado beta-lactoglobulina-CMC (beta-Lg/CMC) apresenta maior conteúdo protéico, provavelmente em conseqüência da proporção estabelecida entre os hidrocolóides coacervados. O coacervado composto pela alfa-La/CMC apresentou menor conteúdo protéico e porcentagem de recuperação dessas proteínas presentes no soro.

Polymers as carriers for rhizobial inoculant formulations

The aim of this work was to evaluate the efficiency of carboxymethyl cellulose (CMC) and starch blends as carrier materials of rhizobial inoculants regarding their capacity to maintain viable cells and promote cowpea (Vigna unguiculata) nodulation. The experimental design adopted was completely randomized, with three replicates. Forty different compositions of carboxymethyl cellulose (CMC) with starch, compatibilized or not with different proportions of MgO or ZnO, were evaluated regarding their ability of maintaining rhizobial viable cells during the storage period of one month at room temperature, in an initial screening. Thereafter, selected inoculant carrier blends were evaluated regarding their ability to maintain viable rhizobial cells for a period of 165 days, and their performance as inoculant carriers was compared to a peat-based inoculant carrier under greenhouse conditions. Rhizobial cells were better maintained in blends containing 50-60% CMC. Compatibilizing agents did not increase survival of rhizobial cells for 30 days of storage. The cowpea nodulation of polymer blends was statistically the same of peat-based inoculants. CMC/starch polymer blends are efficient carriers to rhizobial inoculants for up to 165 days of storage, when compatibilized with MgO (1%).

Conservação pós-colheita de guavira (Campomanesia adamantium Camb.) sob diferentes revestimentos e temperaturas de armazenamento

Objetivou-se com este trabalho avaliar a conservação pós-colheita de guavira (Campomanesia adamantium Camb.) em diferentes revestimentos e temperaturas de armazenamento. Os frutos receberam os seguintes tratamentos: imersão em 1) carboxi metilcelulose a 1% (m/v) (CMC); 2) pectina a 3%; 3) pectina + cloreto de cálcio a 3% (m/v), e 4) sem tratamento (ST), todos embalados em polietileno de baixa densidade (PEBD) e armazenados por 0; 7; 14 e 21 dias em câmara B.O.D., nas temperaturas de 5; 10 e 15 ºC. A menor perda de massa e acidez titulável foram observadas a 5 ºC e na cobertura pectina + cálcio. O pH não variou entre as coberturas e manteve-se maior a 5 ºC. O teor de vitamina C foi maior sob efeito do revestimento de pectina + cálcio, com valores semelhantes aos iniciais a 5 °C e 10 ºC. Concluiu-se que as guaviras podem ser armazenadas por até 21 dias em temperatura de 5 ºC, revestidas com pectina + cálcio a 3%.

Discrepancies over the onset of surfactant monomer aggregation interpreted by fluorescence, conductivity and surface tension methods

Molecular probe techniques have made important contributions to the determination of microstructure of surfactant assemblies such as size, stability, micropolarity and conformation. Conductivity and surface tension were used to determine the critical aggregation concentration (cac) of polymer-surfactant complexes and the critical micellar concentration (cmc) of aqueous micellar aggregates. The results are compared with those of fluorescent techniques. Several surfactant systems were examined, 1-butanol-sodium dodecylsulfate (SDS) mixtures, solutions containing poly(ethylene oxide)-SDS, poly(vinylpyrrolidone)-SDS and poly(acrylic acid)-alkyltrimethylammonium bromide complexes. We found differences between the cac and cmc values obtained by conductivity or surface tension and those obtained by techniques which use hydrophobic probe.

Interação tensoativo/hidrótropo em sistemas aquosos, utilizando ressonância magnética nuclear de ¹H e 13C

In this work, it was studied the behavior of the nonionic surfactant aqueous solutions, containing or not a hydrotropic agent, by resonance magnetic nuclear (NMR). We have studied monofunctional diblock copolymers of poly(propylene oxide-ethylene oxide) (R-PPO-PEO-OH, where R length is linear C4) as nonionic surfactant and sodium p-toluenesulfonate (NaPTS) as hydrotropic agent. The critical micelle concentration (CMC) of the aqueous copolymer solution was obtained from ¹H-NMR. The preliminary study of the interaction between the copolymer, under the unimer and micelle forms, and the hydrotrope, in aqueous solutions, was evaluated by ¹H-NMR and 13C-NMR.

Formação de multicamadas de polissacarídeos e proteína

In this work the formation of multilayers composed by carboxymethylcellulose (CMC), chitosane and bovine serum albumin (BSA) was studied by ellipsometry. First, the adsorption behavior of carboxymethylcellulose onto amino-terminated surfaces was investigated as a function of molecular weight and average degree of substitution of CMC. The influence of these parameters on the adsorbed amount of CMC onto amino-terminated substrates was absent. However, the interaction of CMC covered surfaces with chitosane and BSA was favored when the average degree of substitution of CMC was increased. The adsorption of BSA onto the polysaccharide systems was studied as a function of pH. At the isoelectric point of BSA a maximum in the adsorbed amount was found.

Determinação da concentração micelar crítica de ácidos húmicos por medidas de condutividade e espectroscopia

The aim of this study was the determination of the critical micelle concentration (CMC) of the sodium dodecyl sulfate (SDS) surfactant using spectroscopic and conductimetric determinations and to compare these methodologies in the determination of the CMC of different humic acids (HA). The CMC obtained by conductimetric determination was satisfactory. By spectroscopic determination two values of the CMC were obtained for HA. These values can be to due the intra and intermolecular interactions in the HA structure.

Formação de micelas mistas entre o sal biliar colato de sódio e o surfactante aniônico dodecanoato de sódio

Mixed-micelle formation between sodium chlolate (NaC) and the anionic surfactant sodium dodecanoate (SDoD) in Tris-HCl buffer solutions, pH 9.00, varying the molar fraction of the surfactants, was investigated by means of electrical conductivity and steady-state fluorescence of pyrene. The critical micelar concentration (cmc) was measured from the equivalent conductance versus the square root of the molar surfactant concentration plots and the regular solution theory (RST) was used to predict the mixing behavior. The I1/I3 pyrene ratio-surfactant concentration plots were used as an additional technique to follow the behavior and the changes in the micropolarity of the mixed micelles.

Estudo das interações entre o complexo polieletrolítico trimetilquitosana/carboximetilcelulose e Cu+2, ácido húmico e atrazina em solução aquosa

The polyelectrolyte complex (PEC) resulting from the reaction of sodium carboxymethylcellulose (CMC) and N,N,N-trimethylchitosan hydrochloride (TMQ) was prepared and then characterized by infrared spectroscopy and energy dispersive X rays analysis. The interactions involving the PEC and Cu2+ ions, humic acid and atrazine in aqueous medium were studied. From the adsorption isotherms the maximum amount adsorbed (Xmax) was determined as 61 mg Cu2+/g PEC, 171 mg humic acid/g PEC and 5 mg atrazine/g PEC. The results show that the CMC/TMQ complex has a high affinity for the studied species, indicating its potential application to remove them from aqueous media.

Efecto del catión, del anión y del co-ión sobre la agregación de líquidos iónicos en solución acuosa

The aggregation behavior of thirteen 1-alkyl-3-methylimidazolium based ionic liquids in aqueous solution is presented, considering variations of the alkyl side chain length as well as the anionic moiety. Cation and anion molecular volumes are selected as appropriate molecular descriptors. Additionally, the existing relationship between critical micelle concentration (CMC) and electrolyte concentration in solution is established, aiming to clarify ion effects. CMC values were obtained by measuring electrical conductivity and surface tension. It was confirmed that aggregation of ionic liquids in aqueous solution and in presence of inorganic salts is affected by the factors developed in this study.

Cinética e caracterização de ramnolipídeos produzidos por Pseudomonas aeruginosa MSIC02 utilizando glicerol como fonte de carbono

Glycerol, a co-product of biodiesel production, was used as a carbon source for the kinetics studies and production of biosurfactants by P. aeruginosa MSIC02. The highest fermentative parameters (Y PX = 3.04 g g-1; Y PS = 0.189 g g-1, P B = 31.94 mg L-1 h-1 and P X = 10.5 mg L-1 h-1) were obtained at concentrations of 0.4% (w/v) NaNO3 and 2% (w/v) glycerol. The rhamnolipid exhibited 80% of emulsification on kerosene, surface tension of 32.5 mN m-1, CMC = 28.2 mg L-1, C20 (concentration of surfactant in the bulk phase that produces a reduction of 20 dyn/cm in the surface tension of the solvent) = 0.99 mg L-1, Γm (surface concentration excess) = 2.4 x 10-26 mol Å-2 and S (surface area) = 70.4 Ų molecule-1 with solutions containing 10% NaCl. A mathematical model based on logistic equation was considered to representing the process. Model parameters were estimated by non-linear regression method. This approach was able to give a good description of the process.

OBTENÇÃO DE COMPÓSITOS HÍBRIDOS BASEADOS EM HIDROGÉIS E CIMENTO PORTLAND

In this study, a novel hybrid composite based on biodegradable hydrogel and Portland cement with promising technological properties was reported. In the first step, a full 23 with central point factorial design was utilized to obtain the enhanced polyacrylamide-carboxymethylcellulose hydrogel compositions. A mathematical model was devised, indicating that the 3 main variables were significant and the AAm and MBAAm variables positively contributed to the mode and showing that the CMC variable had the opposite contribution. In the second step, these compositions were mixed with Portland cement to obtain the hybrid composites. The presence of cement improved the mechanical properties of polymeric matrices, and electronic microscopic micrographics revealed that the hydrogels were well adhered to the cement phase and no phase separation between hydrogel and cement was detected. Finally, using the energy dispersive X-ray technique, the elements Na, Mg, Al, Si, S, K, Ca and Fe were detected in the polymeric matrix, consistent with the hybrid composite formation.