Between system maker and privileges taker: the role of China in the Greater Mekong Sub-region

Utilizing China's leadership projects in the Great Mekong Sub-Region (GMS) as a case study, this paper aims to investigate whether China qualifies as an international leader. This work argues that its geographic position and economic rise allow China to be a "system maker and privilege taker," which is a dual role forming in economic-political relations in the GMS in the last ten years. China is among major driving forces to set up an economic zone in GMS. Growing Chinese regional power is intimately related to the creation of various hubs connecting regional transportation, communication and energy systems that foster the economic development of this region. However, China also proves dark sides of rising powers which take advantage of their privileges to gain benefits. As a "system maker" with its own position and capability, China has notably benefited from building hydropower systems. More importantly, while China is pursuing its benefits and privileges, its hydropower projects have caused some negative effects for the ecosystem in the region. The inflation of dam constructions in both China and GMS countries is raising concerns about using natural resources of the Mekong River. Our concluding part addresses the pressing need to start a serious discussion on the balance between national interests and regional solidarity within the formulation of Chinese foreign policy in GMS.

Innovative technological capability in firms of the tourism sector: a study of the hotels in the city of Rio de Janeiro during the 1990-2008 period

This article presents the preliminary report of the research project entitled "Innovative technological capability in firms of the tourism sector: a study of the hotels in the city of Rio de Janeiro during the 1990-2008 period". The objective of this project is to apply and evaluate an analytical model of technological capability and underlying learning processes and examine the accumulation trajectory of innovative technological capability in the firms of tourism service industry, and the impact of learning processes undertaken by these firms on the technological capability levels achieved during the 1990-2008 period.

The mineralogy and chemistry of the German and Portuguese tiles used to face a historic building in the Amazon region and their natural susceptibility to tropical weathering

During the 19th century, the most prominent buildings of the city of Belém were faced entirely with tiles manufactured in Portugal and Germany, which now exhibit distinct degrees of degradation. The Pinho mansion is one of the most important of these buildings and was selected for the investigation of the action of the tropical Amazonian climate on the degradation of the tiles. To achieve this objective, the tiles were mapped for organic and inorganic degradation, and samples were collected for analysis. The minerals were determined by XRD, the chemical composition by classical wet methods and SEM/EDS, and the microorganisms under the microscope. The results show that the German and Portuguese tiles are quite different in their composition. While both ceramic bodies are composed of SiO2 and Al2O3, CaO was found only in the Portuguese tile. The low Na2O and K2O contents indicate the addition of materials to reduce the fusion temperature. SiO2 and PbO are the main constituents of the glaze, with CoO and FeO being added as pigment. The ceramic body of the German tiles is constituted of quartz, mullite, and cristobalite, in contrast with the Portuguese tiles, which are made of quartz, gehlenite, diopside, calcite, and feldspars. The glazes are XRD-amorphous. The chemical and mineralogical differences between the German and Portuguese tiles indicate that they were produced from different raw materials under distinct thermal processes. The most prominent weathering-related modifications are the thin layers (German tiles), oxidation stains, dark stains, the detachment of the tile (Portuguese tiles), loss of the glaze and powdering of the ceramic body (Portuguese tiles) through the establishment of Cyanophyta and Bacillariophyta.. The distinct degradation patterns of the tiles exposed to the tropical Amazon climate are a consequence of their distinct mineralogy and chemistry.

The influence of building materials on the residual action of BHC

Residual insecticide activity of BHC vapors from various building materials in controlled humidity chambers in the laboratory were significantly different. Laboratory-reared, first instar nymphs of Dipetalogaster maximus were exposed to vapors of BHC which were being released from the treated surfaces of building materials taken from Mambaí, Goiás.

Study of parental models: building an instrument for their exploration

Objective: This research presents the construction of an attributional questionnaire concerning the different parental models and factors that are involved in family interactions. Method: A mixed methodology was used as a foundation to develop items and respective pilots that allowed checking the validity and internal consistency of the instrument using expert judgment. Results: An instrument of 36 statements was organized into 12 categories to explore the parental models according to the following factors: parental models, breeding patterns, attachment bonds and guidelines for success, and promoted inside family contexts. Analyzing these factors contributes to the children’s development within the familiar frown, and the opportunity for socio-educational intervention. Conclusion: It is assumed that the family context is as decisive as the school context; therefore, exploring the nature of parental models is required to understand the features and influences that contribute to the development of young people in any social context.





A new cluster-brood building species of Plebeia (Hymenoptera, Apidae) from eastern Brazil

A new species of Plebeia, the second largest genus of stingless bees in the Neotropical region, is described from eastern Brazil. Plebeia grapiuna sp. nov., known only from the lowland forests of southern Bahia, is most similar to P. lucii Moure, a species recently described from Minas Gerais. The lack of yellow marks and the smoother integument of the frons and mesoscutum in P. grapiuna sp. nov. distinguish them. Main features of the nesting habits of the new species are described and illustrated.

Building predictive models of soil particle-size distribution

Is it possible to build predictive models (PMs) of soil particle-size distribution (psd) in a region with complex geology and a young and unstable land-surface? The main objective of this study was to answer this question. A set of 339 soil samples from a small slope catchment in Southern Brazil was used to build PMs of psd in the surface soil layer. Multiple linear regression models were constructed using terrain attributes (elevation, slope, catchment area, convergence index, and topographic wetness index). The PMs explained more than half of the data variance. This performance is similar to (or even better than) that of the conventional soil mapping approach. For some size fractions, the PM performance can reach 70 %. Largest uncertainties were observed in geologically more complex areas. Therefore, significant improvements in the predictions can only be achieved if accurate geological data is made available. Meanwhile, PMs built on terrain attributes are efficient in predicting the particle-size distribution (psd) of soils in regions of complex geology.

Symbiotic capability of calopo rhizobia from an agrisoil with different crops in Pernambuco

Biological nitrogen fixation by rhizobium-legume symbiosis represents one of the most important nitrogen sources for plants and depends strongly on the symbiotic efficiency of the rhizobium strain. This study evaluated the symbiotic capacity of rhizobial isolates from calopo (CALOPOGONIUM MUCUNOIDES) taken from an agrisoil under BRACHIARIA DECUMBENS pasture, sabiá (MIMOSA CAESALPINIIFOLIA) plantations and Atlantic Forest areas of the Dry Forest Zone of Pernambuco. A total of 1,575 isolates were obtained from 398 groups. A single random isolate of each group was authenticated, in randomized blocks with two replications. Each plant was inoculated with 1 mL of a bacterial broth, containing an estimated population of 10(8) rhizobial cells mL-1. Forty-five days after inoculation, the plants were harvested, separated into shoots, roots and nodules, oven-dried to constant mass, and weighed. Next, the symbiotic capability was tested with 1.5 kg of an autoclaved sand:vermiculite (1:1) mixture in polyethylene bags. The treatments consisted of 122 authenticated isolates, selected based on the shoot dry matter, five uninoculated controls (treated with 0, 50, 100, 150, or 200 kg ha-1 N) and a control inoculated with SEMIA 6152 (=BR1602), a strain of BRADYRHIZOBIUM JAPONICUM The test was performed as described above. The shoot dry matter of the plants inoculated with the most effective isolates did not differ from that of plants treated with 150 kg ha-1 N. Shoot dry matter was positively correlated with all other variables. The proportion of effective isolates was highest among isolates from SABIÁ forests. There was great variation in nodule dry weight, as well as in N contents and total N.

Building the future: the Brazilian university library in 2010

Information technology will affect academic activities as well as the nature of the high education sector. This sector besides the need to assimilate these technologies will need to attend the requisites of market globalization and, as consequence, all theses changes will be reflected in the university library. Prospectives impacts will affect the structure (emphasis in user services, outsourcing of several services), in the financing aspect (growing of consortia in order to reduce costs), in services (electronic reference, support to long distance education programs, intelligent agents) and in the clientele (attending the great demand por high education which implies a diversity of people).

Shewhart's control charts and process capability ratio applied to a sewage treatment station

The current study used statistical methods of quality control to evaluate the performance of a sewage treatment station. The concerned station is located in Cascavel city, Paraná State. The evaluated parameters were hydrogenionic potential, settleable solids, total suspended solids, chemical oxygen demand and biochemical oxygen demand in five days. Statistical analysis was performed through Shewhart control charts and process capability ratio. According to Shewhart charts, only the BOD(5.20) variable was under statistical control. Through capability ratios, we observed that except for pH the sewage treatment station is not capable to produce effluents under characteristics that fulfill specifications or standard launching required by environmental legislation.

Predictive Capability of HPV and Pap Tests in Screening for Cervical Cancer over a Three-Year Follow-up

Purpose To compare the predictive capability of HPV and Pap smear tests for screening pre-cancerous lesions of the cervix over a three-year follow-up, in a population of users of the Brazilian National Health System (SUS). Methods This is a retrospective cohort study of 2,032 women with satisfactory results for Pap smear and HPV tests using second-generation hybrid capture,made in a previous study. We followed them for 36 months with data obtained from medical records, the Cervix Cancer Information System (SISCOLO), and the Mortality Information System (SIM). The outcome was a histological diagnosis of cervical intraepithelial neoplasia grade 2 or more advanced lesions (CIN2ş). We constructed progression curves of the baseline test results for the period, using the Kaplan-Meier method, and estimated sensitivity, specificity, positive and negative predictive value, and positive and negative likelihood ratios for each test. Results A total of 1,440 women had at least one test during follow-up. Progression curves of the baseline test results indicated differences in capability to detect CIN2ş (p < 0.001) with significantly greater capability when both tests were abnormal, followed by only a positive HPV test. The HPV test was more sensitive than the Pap smear (88.7% and 73.6%, respectively; p < 0.05) and had a better negative likelihood ratio (0.13 and 0.30, respectively). Specificity and positive likelihood ratio of the tests were similar. Conclusions These findings corroborate the importance of HPV test as a primary cervical cancer screening.

Building bone tissue: matrices and scaffolds in physiology and biotechnology

Deposition of bone in physiology involves timed secretion, deposition and removal of a complex array of extracellular matrix proteins which appear in a defined temporal and spatial sequence. Mineralization itself plays a role in dictating and spatially orienting the deposition of matrix. Many aspects of the physiological process are recapitulated in systems of autologous or xenogeneic transplantation of osteogenic precursor cells developed for tissue engineering or modeling. For example, deposition of bone sialoprotein, a member of the small integrin-binding ligand, N-linked glycoprotein family, represents the first step of bone formation in ectopic transplantation systems in vivo. The use of mineralized scaffolds for guiding bone tissue engineering has revealed unexpected manners in which the scaffold and cells interact with each other, so that a complex interplay of integration and disintegration of the scaffold ultimately results in efficient and desirable, although unpredictable, effects. Likewise, the manner in which biomaterial scaffolds are "resorbed" by osteoclasts in vitro and in vivo highlights more complex scenarios than predicted from knowledge of physiological bone resorption per se. Investigation of novel biomaterials for bone engineering represents an essential area for the design of tissue engineering strategies.