More than one inseminated female in colonies of the independent-founding wasp Mischocyttarus cassununga von Ihering (Hymenoptera, Vespidae)

In the primitively eusocial wasps, especially Polistini and Mischocyttarini tribes, the physiological condition of each individual is strongly associated with its dominance status in the colonial hierarchy. As a rule, in independent-founding wasps, female wasps are all morphologically alike, and their role is apparently quite flexible even as adults. However, some studies have shown that differences in body size can exist between reproductive and non-reproductive females. Thus, the present study aimed at detecting differences between reproductive (inseminated) and non-reproductive (uninseminated) individuals based on morphological and physiological parameters. We tape-recorded the daily behavioural repertory of six colonies of Mischocyttarus cassununga for determining the hierarchical dominance in the field, and then collected these colonies (in different cycle stages) for measuring 13 set characters, and assessing the physiological condition of each individual by inspecting their fat bodies and ovaries. Our results revealed that inseminated and uninseminated females are not significantly different in relation to body size, in spite of first group shows higher average than second in almost all measured parts. The physiological evaluation of each individual demonstrated more than one inseminated female per colony during all stages of the colony cycle, suggesting a strategic condition of this species against difficulties (predation and parasitism of the colony) in nature.

Oral Susceptibility to Yellow Fever Virus of Aedes aegypti from Brazil

The oral susceptibility to yellow fever virus was evaluated in 23 Aedes aegypti samples from Brazil. Six Ae. aegypti samples from Africa, America and Asia were also tested for comparison. Mosquito samples from Asia showed the highest infection rates. Infection rates for the Brazilian Ae. aegypti reached 48.6%, but were under 13% in 60% of sample tested. We concluded that although the low infection rates estimated for some Brazilian mosquito samples may not favor the establishment of urban cycle of yellow fever in some parts of the country, the founding of Ae. aegypti of noteworthy susceptibility to the virus in cities located in endemic and transition areas of sylvatic yellow fever, do pose a threat of the re-emergence of the urban transmission of the disease in Brazil.

Morphological and physiological variation between queens and workers of Protonectarina sylveirae (de Saussure) (Hymenoptera, Vespidae, Epiponini)

Morphological and physiological variation between queens and workers of Protonectarina sylveirae (de Saussure) (Hymenoptera, Vespidae, Epiponini). The Neotropical swarm-founding wasps, Epiponini, range from the absence of morphological differentiation between castes to highly distinct castes. We measured eight body parts of females of two colonies of Protonectarina sylveirae (de Saussure, 1854). ANOVA and Discriminant Analysis evidenced significant differences between castes, as previously observed by other authors for other species of Epiponini. However, some females previously categorized as queens, were actually workers, supported by our statistic analyses. These individuals showed intermediate morphological features between queens and workers, having distinct patterns of hairs and clypeal spots. The castes of P. sylveirae are distinct, however intermediate individuals may be found in colonies promoting social flexibility.

Lipid and energy contents in the bodies of queens of Atta sexdens rubropilosa Forel (Hymenoptera, Formicidae): pre-and post-nuptial flight

The nuptial flight allows males and females to meet and copulate and both need energy to perform this activity. Before leaving the nest, males and females are well nourished and ready to mate. However, little is known about the lipid and energy contents in females before the nuptial flight (virgins) and after it (mated females). In this work we measured lipid concentrations in relation to body weight in these individuals. Our results showed that 16.82% of the bodies of young virgin females one month before mating flight are composed of lipids, contrasting with the 32.62% lipid content in mated females who had not excavated their nest yet, and 32.88% in those who had. The energy content measured for virgin females was 2942.63 J, contrasting with 6110.01 J for queens before excavating the nest and 5677.51 J after excavation. Based on our results, we conclude that the body mass, and therefore the lipid and energy contents in the bodies of Atta sexdens rubropilosa queens double during the last month before the nuptial flight. This energy resource is fundamental to the activities required during the nuptial flight, digging the nest and the founding of the colony.

Genetic structure of populations of Pissodes castaneus (De Geer) (Coleoptera, Curculionidae) using amplified fragment length polymorphism

Genetic structure of populations of Pissodes castaneus (De Geer) (Coleoptera, Curculionidae) using amplified fragment length polymorphism. The objective of this study was to determine the genetic structure of populations of Pissodes castaneus from different areas and on different species of Pinus using the PCR-AFLP technique. Twenty samples were analyzed, representing 19 populations from Brazil and one from Florence, Italy, which is the region of origin of P. castaneus. The four combinations of primers generated a total of 367 fragments of DNA, and 100% of polymorphic loci, indicating high degree of molecular polymorphism. The dendrogram did not reveal trends for grouping the populations in relation to origin. The low genetic similarity (0.11 between the most distant groups) and genetic distances of 0.13 and 0.44 for 10 out of the 20 samples may indicate several founding events or multiple introductions of heterogeneous strains into Brazil. The allelic fixation index (Fst) was 0.3851, considered high, and the number of migrants (Nm) was 0.3991, indicating low gene flow among populations. The highest genetic distances were between the population from Irani, SC and Cambará do Sul, RS and Bituruna, PR, indicating an independent founding event or a particular allelic fixation in the former location. The high genetic diversity among populations points out that the populations are genetically heterogeneous with a diverse gene pool in the surveyed areas, what makes them to respond differently to control measures.

Extractants to assess zinc phytoavailability in mineral fertilizer and industrial by-products

Efficient analytical methods for the quantification of plant-available Zn contained in mineral fertilizers and industrial by-products are fundamental for the control and marketing of these inputs. In this sense, there are some doubts on the part of the scientific community as well as of the fertilizer production sector, whether the extractor requested by the government (Normative Instruction No. 28, called 2nd extractor), which is citric acid 2 % (2 % CA) (Brasil, 2007b), is effective in predicting the plant availability of Zn via mineral fertilizers and about the agronomic significance of the required minimal solubility of 60 % compared to the total content (HCl) (Brasil, 2007a). The purpose of this study was to evaluate the alternative extractors DTPA, EDTA, neutral ammonium citrate (NAC), buffer solution pH 6.0, 10 % HCl, 10 % sulfuric acid, 1 % acetic acid, water, and hot water to quantify the contents of Zn available for maize and compare them with indices of agronomic efficiency of fertilizers and industrial by-products when applied to dystrophic Clayey Red Latosol and Dystrophic Alic Red Yellow Latosol with medium texture. The rate of Zn applied to the soil was 5 mg kg-1, using the sources zinc sulfate, commercial granular zinc, ash and galvanic sludge, ash and two brass slags. Most Zn was extracted from the sources by DTPA, 10 % HCl, NAC, 1% acetic acid, and 10 % sulfuric acid. Recovery by the extractors 2 % CA, EDTA, water, and hot water was low. The agronomic efficiency index was found to be high when using galvanic sludge (238 %) and commercial granular zinc (142 %) and lower with brass slag I and II (67 and 27 %, respectively). The sources galvanizing ash and brass ash showed solubility lower than 60 % in 2 % CA, despite agronomic efficiency indices of 78 and 125 %, respectively. The low agronomic efficiency index of industrial by-products such as brass slag I and galvanizing ash can be compensated by higher doses, provided there is no restriction, as well as for all other sources, in terms of contaminant levels of arsenic, cadmium, chromium, lead, and mercury as required by law (Normative Instruction No 27/2006). The implementation of 2nd extractor 2 % CA and the requirement of minimum solubility for industrial by-products could restrict the use of alternative sources as potential Zn sources for plants.

Institutional landmarks in Brazilian research on soil erosion: a historical overview

The problem of soil erosion in Brazil has been a focus of agricultural scientific research since the 19th century. The aim of this study was to provide a historical overview of the institutional landmarks which gave rise to the first studies in soil erosion and established the foundations of agricultural research in Brazil. The 19th century and beginning of the 20th century saw the founding of a series of institutions in Brazil, such as Botanical Gardens, executive institutions, research institutes, experimental stations, educational institutions of agricultural sciences, as well as the creation and diversification of scientific journals. These entities, each in its own way, served to foster soil erosion research in Brazil. During the Imperial period (1808-1889), discussions focused on soil degradation and conserving the fertility of agricultural land. During the First Republic (1889-1930), with the founding of various educational institutions and consolidation of research on soil degradation conducted by the Agronomic Institute of Campinas in the State of São Paulo, studies focused on soil depletion, identification of the major factors causing soil erosion and the measures necessary to control it. During the New State period (1930-1945), many soil conservation practices were developed and disseminated to combat erosion and field trials were set up, mainly to measure soil and water losses induced by hydric erosion. During the Brazilian New Republic (1945-1964), experiments were conducted throughout Brazil, consolidating soil and water conservation as one of the main areas of Soil Science in Brazil. This was followed by scientific conferences on erosion and the institutionalization of post-graduate studies. During the Military Regime (1964-1985), many research and educational institutions were founded, experimental studies intensified, and coincidently, soil erosion reached alarming levels which led to the development of the no-tillage system.

PHYTOAVAILABILITY OF COPPER IN INDUSTRIAL BY-PRODUCTS AND MINERAL FERTILIZERS

Alternative copper (Cu) sources could be used in fertilizer production, although the bioavailability of copper in these materials is unknown. The objective of this study was to evaluate the extractants neutral ammonium citrate (NAC), 2 % citric acid, 1 % acetic acid, 10 % HCl, 10 % H2SO4, buffer solution pH 6.0, DTPA, EDTA, water, and hot water in the quantification of available Cu content in several sources, relating them to the relative agronomic efficiency (RAE) of wheat grown in a clayey Latossolo Vermelho eutrófico (Oxisol) and Neossolo Quartzarênico (Typic Quartzipsamment). Copper was applied at the rate of 1.5 mg kg-1 as scrap slag, brass slag, Cu ore, granulated copper, and copper sulfate. The extractants 10 % HCl, 10 % H2SO4, and NAC extracted higher Cu concentrations. The RAE values of brass slag and Cu ore were similar to or higher than those of Cu sulfate and granulated Cu. Solubility in the 2nd NAC extractant, officially required for mineral fertilizers with Cu, was lower than 60 % for the scrap slag, Cu ore, and granulated copper sources. This fact indicates that adoption of the NAC extractant may be ineffective for industrial by-products, although no extractant was more efficient in predicting Cu availability for wheat fertilized with the Cu sources tested.

Genetic variability of marine shrimp in the Brazilian industry

The objective of this work was to estimate the genetic variability level and distribution in Brazilian broodstocks of marine shrimp (Litopenaeus vannamei). Nine of the country's largest hatcheries were evaluated using codominant and highly polymorphic microsatellite markers. The results obtained from genotyping of ten microsatellite loci are indicative of genetic variability that is compatible with that found in wild populations of L. vannamei in Mexico and Central America. A possible explanation is the highly diversified and relatively recent origin of the available broodstocks. Bayesian analysis detected a signal for five founding populations. The distribution of genetic distances partially reflects geographical location, and this information will be useful for the creation of new broodstocks. Therefore, L. vannamei genetic variability among nine of the largest national hatcheries can be considered high.

Estudo polarográfico sobre a determinação de Fe(III) utilizando-se a técnica da polarografia de pulso diferencial

A differential pulse polarographic study with the objective to determine iron (III) in presense of copper (II) in a supporting electrolyte based on citrate - EDTA was made. The best experimental conditions found were a supporting electrolyte of citrate 0.25 mol L-1, EDTA 0.050 mol L-1 and KNO3 0.50 mol L-1, pH 5.00. In this media iron (III) showed a polarographic peak in -0.08 V and the copper (II) in -0.34 V, both vs. Ag/AgCl (saturated KCl). Thus, a analytical method was developed and applied to determine iron (III) in brass alloy, a matrix were copper is in large excess over iron. The results obtained showed no interference of copper in the iron determination. The value of 0.21% of iron in the sample alloy composition was obtained and the method was validated by atomic absortion and recovery test, and the results exhibited a good agreement with the proposed method.

Sistema limpo em linha para extração em fase sólida de contaminantes emergentes em águas naturais

A solid-phase in-line extraction system for water samples containing low levels of emerging contaminants is described. The system was specially developed for large volume samples (up to 4 L) using commercial solid-phase extraction (SPE) cartridges. Four sets containing PTFE-made connectors, brass adapters and ball valves were used to fit SPE cartridges and sample bottles to a 4-port manifold attached to a 20 L carboy. A lab-made vacuum device was connected to the manifold cap. The apparatus is robust and less expensive than the typical available system. Its also provides less experimental handling, avoiding cross contamination and sample losses.

DESENVOLVIMENTO DE EXPERIMENTO DIDÁTICO DE ELETROGRAVIMETRIA DE BAIXO CUSTO UTILIZANDO PRINCÍPIOS DA QUÍMICA VERDE

In this paper, we describe the development of low-cost teaching experiments of electrogravimetry for undergraduate students using principles of green chemistry. Copper was electrochemically deposited on brass under an electrical current density of 50 mA cm−2 from acidic solutions containing nitrate anions. Color changes at the brass electrode and of the solution were observed, indicating that the reduction of copper ions had occurred. The deposition efficiency values were between 92.8% and 93.8%, and the electrochemical efficiency values were between 85.6% and 86.5%. There was no significant contribution from parallel reactions. These experimental conditions facilitated the didactic exploration of gravimetric and electrochemical concepts. Following the principles of green chemistry, the experiments produced no toxic substances, all the materials could be recycled, and the energy consumption was the lowest. For this reason, this experiment was considered to be very interesting for didactical purposes.

Prevalência dos tumores cutâneos de equinos diagnosticados no Laboratório de Patologia Veterinária da Universidade Federal de Santa Maria, Rio Grande do Sul

Este estudo teve como objetivo determinar a prevalência das dermatopatias tumorais de equinos diagnosticadas no Laboratório de Patologia Veterinária (LPV) da Universidade Federal de Santa Maria (UFSM), Rio Grande do Sul. Para isso, foram revisados os protocolos de biópsia de pele de equinos, arquivados no LPV-UFSM, entre janeiro de 1999 e dezembro de 2009. Em todos os casos, foram considerados os diagnósticos morfológicos que constavam nos protocolos. Durante esse período foram submetidas ao LPV-UFSM 139 amostras cutâneas de equinos. Dessas 139 amostras, 108 (77,6%) eram de tumores cutâneos, neoplásicos ou não; os outros 31 casos consistiam de dermatoses não tumorais. Dos 108 equinos, 53 (49,1%) eram fêmeas e 37 (34,2% %) eram machos, em 18 (16,7%) casos não estava descrito no protocolo o sexo. Quanto à raça, 66 (61,1%) eram de raça pura e 13 (12%) não tinham raça definida; em 29 (26,9%) protocolos não havia a descrição da raça. A raça mais prevalente foi a Crioula (44/108 [40,7%]), o restante dos 22 equinos de raça pura pertencia a outras sete raças diferentes. Quanto à idade, as categorias mais prevalentes em ordem decrescente foram a de 1-5 anos (47/108 [43,5%]) e a de 6-14 anos (21/108 [19,5%]), cavalos com 15 anos ou mais representaram 11,1% (12/108). Apenas um cavalo tinha menos de um ano de idade. Em 27 protocolos não constava a idade. Os tumores mais prevalentes incluíram: sarcoide (62/108 [57,4%]); carcinoma de células escamosas (11/108 [10,2%]); pitiose (9/108 [8,3%]); tecido de granulação (7/108 [6,5%]; e o granuloma eosinofílico (4/108 [3,8%]). Os outros tumores contaram com aproximadamente 14% dos casos.

Turbulent heat transfer and pressure drop in pinned annular regions

Experiments were performed to determine average heat transfer coefficients and friction factors for turbulent flow through annular ducts with pin fins. The measurements were carried out by means of a double-pipe heat exchanger. The total number of pins attached to the inner wall of the annular region was 560. The working fluids were air, flowing in the annular channel, and water through the inner circular tube. The average heat transfer coefficients of the pinned air-side were obtained from the experimental determination of the overall heat transfer coefficients of the heat exchanger and from the knowledge of the average heat transfer coefficients of the circular pipe (water-side), which could be found in the pertinent literature. To attain fully developed conditions, the heat exchanger was built with additional lengths before and after the test section. The inner circular duct of the heat exchanger and the pin fins were made of brass. Due to the high thermal conductivity of the brass, the small tube thickness and water temperature variation, the surface of the internal tube was practically isothermal. The external tube was made of an industrial plastic which was insulated from the environment by means of a glass wool batt. In this manner, the outer surface of the annular channel can be considered adiabatic. The results are presented in dimensionless forms, in terms of average Nusselt numbers and friction factors as functions of the flow Reynolds number, ranging from 13,000 to 80,000. The pin fin efficiency, which depends on the heat transfer coefficient, is also determined as a function of dimensionless parameters. A comparison of the present results with those for smooth sections (without pins) is also presented. The purpose of such a comparison is to study the influence of the presence of the pins on the pressure drop and heat transfer rate.

El éxito del Mercosur posible

The success of the possible Mercosur. Mercosur can be observed from two different perspectives. One from an ideal integration project, whose reference is the European Union. The other, based in the profound prevailing asymmetries within the region and the progress achieved since the founding bilateral agreements of presidents Alfonsin and Sarney, in 1985. From the first perspective, Mercosur in a failure; from the second, it has achieved considerable success. The integration process is displayed in three levels: the national density prevailing in the member countries, the rules of the game of the system and the common standings vis a vis the rest of the world. The future of Mercosur depends on progress achieved in these three levels and the opening of new possibilities of national development for each member country in a regional framework.