Fluoride and aluminum in teas and tea-based beverages

OBJECTIVE: To evaluate fluoride and aluminum concentration in herbal, black, ready-to-drink, and imported teas available in Brazil considering the risks fluoride and aluminum pose to oral and general health, respectively. METHODS: One-hundred and seventy-seven samples of herbal and black tea, 11 types of imported tea and 21 samples of ready-to-drink tea were divided into four groups: I-herbal tea; II-Brazilian black tea (Camellia sinensis); III-imported tea (Camellia sinensis); IV-ready-to-drink tea-based beverages. Fluoride and aluminum were analyzed using ion-selective electrode and atomic absorption, respectively. RESULTS: Fluoride and aluminum levels in herbal teas were very low, but high amounts were found in black and ready-to-drink teas. Aluminum found in all samples analyzed can be considered safe to general health. However, considering 0.07 mg F/kg/day as the upper limit of fluoride intake with regard to undesirable dental fluorosis, some teas exceed the daily intake limit for children. CONCLUSIONS: Brazilian and imported teas made from Camellia sinensis as well as some tea-based beverages are sources of significant amounts of fluoride, and their intake may increase the risk of developing dental fluorosis.

COMPARISON BETWEEN AUTOMATED SYSTEM AND PCR-BASED METHOD FOR IDENTIFICATION AND ANTIMICROBIAL SUSCEPTIBILITY PROFILE OF CLINICAL Enterococcus spp

Enterococci are increasingly responsible for nosocomial infections worldwide. This study was undertaken to compare the identification and susceptibility profile using an automated MicrosScan system, PCR-based assay and disk diffusion assay of Enterococcus spp. We evaluated 30 clinical isolates of Enterococcus spp. Isolates were identified by MicrosScan system and PCR-based assay. The detection of antibiotic resistance genes (vancomycin, gentamicin, tetracycline and erythromycin) was also determined by PCR. Antimicrobial susceptibilities to vancomycin (30 µg), gentamicin (120 µg), tetracycline (30 µg) and erythromycin (15 µg) were tested by the automated system and disk diffusion method, and were interpreted according to the criteria recommended in CLSI guidelines. Concerning Enterococcus identification the general agreement between data obtained by the PCR method and by the automatic system was 90.0% (27/30). For all isolates of E. faecium and E. faecalis we observed 100% agreement. Resistance frequencies were higher in E. faecium than E. faecalis. The resistance rates obtained were higher for erythromycin (86.7%), vancomycin (80.0%), tetracycline (43.35) and gentamicin (33.3%). The correlation between disk diffusion and automation revealed an agreement for the majority of the antibiotics with category agreement rates of > 80%. The PCR-based assay, the van(A) gene was detected in 100% of vancomycin resistant enterococci. This assay is simple to conduct and reliable in the identification of clinically relevant enterococci. The data obtained reinforced the need for an improvement of the automated system to identify some enterococci.

Evaluation of parasitological examination, kDNA polymerase chain reaction and rK39-based immunochromatography for the diagnosis of visceral leishmaniasis in seropositive dogs from the screening-culling program in Brazil

Introduction Dogs play a primary role in the zoonotic cycle of visceral leishmaniasis (VL). Therefore, the accurate diagnosis of infected dogs, primarily asymptomatic dogs, is crucial to the efficiency of VL control programs. Methods We investigated the agreement of four diagnostic tests for canine visceral leishmaniasis (CVL): parasite detection, either after myeloculture or by direct microscopic examination of tissue imprints; kinetoplast-deoxyribonucleic acid-polymerase chain reaction (kDNA-PCR); and an immunochromatographic test (ICT). An enzyme-linked immunosorbent assay (ELISA) and an indirect immunofluorescence test (IFAT), both of which were adopted as part of the screening-culling program in Brazil, were used as reference tests. Our sample set consisted of 44 seropositive dogs, 25 of which were clinically asymptomatic and 19 were symptomatic for CVL according to ELISA-IFAT. Results The highest and lowest test co-positivities were observed for ICT (77.3%) and myeloculture (58.1%), respectively. When analyzed together, the overall percentage of co-positive tests was significantly higher for the symptomatic group compared to the asymptomatic group. However, only ICT was significantly different based on the results of a separate analysis per test for each group of dogs. The majority (93.8%) of animals exhibited at least one positive test result, with an average of 2.66 positive tests per dog. Half of the symptomatic dogs tested positive for all four tests administered. Conclusions The variability between test results reinforces the need for more efficient and reliable methods to accurately diagnose canine VL, particularly in asymptomatic animals.

Detection of Leishmania infantum in naturally infected Lutzomyia longipalpis (Diptera: Psychodidae: Phlebotominae) and Canis familiaris in Misiones, Argentina: the first report of a PCR-RFLP and sequencing-based confirmation assay

In this study, a genotypification of Leishmaniawas performed using polimerase chain reaction-restriction fragment length polymorfism (PCR-RFLP) and sequencing techniques to identify species of Leishmaniaparasites in phlebotomine sand flies and dogs naturally infected. Between January-February of 2009, CDC light traps were used to collect insect samples from 13 capture sites in the municipality of Posadas, which is located in the province of Misiones of Argentina. Sand flies identified as Lutzomyia longipalpiswere grouped into 28 separate pools for molecular biological analysis. Canine samples were taken from lymph node aspirates of two symptomatic stray animals that had been positively diagnosed with canine visceral leishmaniasis. One vector pool of 10 sand flies (1 out of the 28 pools tested) and both of the canine samples tested positively for Leishmania infantumby PCR and RFLP analysis. PCR products were confirmed by sequencing and showed a maximum identity with L. infantum. Given that infection was detected in one out of the 28 pools and that at least one infected insect was infected, it was possible to infer an infection rate at least of 0.47% for Lu. longipalpisamong the analyzed samples. These results contribute to incriminate Lu. longipalpis as the vector of L. infantumin the municipality of Posadas, where cases of the disease in humans and dogs have been reported since 2005.

Women working at university restaurants: life and work conditions and gender-based violence

This is an exploratory and descriptive study with a quantitative approach that aimed to understand the social production and reproduction processes of women working at university restaurants and the occurrence and the magnitude of gender-based violence committed against them by their intimate partners. The data were collected through semi-structured interviews. The analysis categories used were social production and reproduction, gender and gender-based violence. The interviewees held a subordinate social position during the productive and reproductive periods of their lives. Approximately 70% reported having experienced gender-based violence from an intimate partner (66% psychological violence, 36.3% physical violence and 28.6% sexual violence). Most of the health problems resulting from violence were related to mental health. The results indicate that the situation requires immediate interventions, mostly guided by the instrumentalization of these women and the support by the state and the university as appropriate to address violence.

Method to estimate soil macroporosity and microporosity based on sand content and bulk density

Macroporosity is often used in the determination of soil compaction. Reduced macroporosity can lead to poor drainage, low root aeration and soil degradation. The aim of this study was to develop and test different models to estimate macro and microporosity efficiently, using multiple regression. Ten soils were selected within a large range of textures: sand (Sa) 0.07-0.84; silt 0.03-0.24; clay 0.13-0.78 kg kg-1 and subjected to three compaction levels (three bulk densities, BD). Two models with similar accuracy were selected, with a mean error of about 0.02 m³ m-3 (2 %). The model y = a + b.BD + c.Sa, named model 2, was selected for its simplicity to estimate Macro (Ma), Micro (Mi) or total porosity (TP): Ma = 0.693 - 0.465 BD + 0.212 Sa; Mi = 0.337 + 0.120 BD - 0.294 Sa; TP = 1.030 - 0.345 BD 0.082 Sa; porosity values were expressed in m³ m-3; BD in kg dm-3; and Sa in kg kg-1. The model was tested with 76 datum set of several other authors. An error of about 0.04 m³ m-3 (4 %) was observed. Simulations of variations in BD as a function of Sa are presented for Ma = 0 and Ma = 0.10 (10 %). The macroporosity equation was remodeled to obtain other compaction indexes: a) to simulate maximum bulk density (MBD) as a function of Sa (Equation 11), in agreement with literature data; b) to simulate relative bulk density (RBD) as a function of BD and Sa (Equation 13); c) another model to simulate RBD as a function of Ma and Sa (Equation 16), confirming the independence of this variable in relation to Sa for a fixed value of macroporosity and, also, proving the hypothesis of Hakansson & Lipiec that RBD = 0.87 corresponds approximately to 10 % macroporosity (Ma = 0.10 m³ m-3).

Rosemary extract and celery-based products used as natural quality enhancers for colonial type salami with different ripening times

This study aimed to evaluate the use of rosemary (Rosmarinus officinalis) extract (RE), celery (Apium graveolis), and low levels of NO3 and NO2 as natural agents to enhance the quality of colonial salami. Salami was produced according to three treatments: (A) Control: 0.1% curing salt; (B) Rosemary: 0.05% curing salt + 0.5% RE (rosemary extract); and (C) Rosemary+celery: 0.14% Veg 503 + 0.27% Veg 504 (sea salt plus celery) + 0.5% of RE (rosemary extract). There was no effect (P > 0.05) of the treatments on water activity, Na content, and residual NO3 and NO2. Fatty acids C18:2 and C20:4 were reduced (P < 0.05) during the ripening period in the Control treatment indicating possible oxidation. The use of celery resulted in lower pH values (P < 0.05) in the salami. Reduced addition of NO3 and NO2 resulted in salami lighter in color (higher L* values, P < 0.05) at the 12th day of ripening. In conclusion, celery-based products proved to be an effective source of NO2 and NO3 for color development, but the low pH of the product indicates the need for better evaluation of its use in fermented salami. The RE (rosemary extract) reduced fat oxidation in salami, but this needs further evaluation.

Cell and humoral immunity in endemic pemphigus foliaceus

A study was conducted on 16 patients with pemphigus foliaceus, ten of them with the localized form (group G1) and six with the disseminated form (group G2). These patients were submitted to full blood counts, quantitation of mononuclear cell subpopulations by monoclonal antibodies, study of blastic lymphocyte transformation, and quantitation of circulating antibodies by the indirect immunofluorescence test, in order to correlate their clinical signs and symptoms and laboratory data with their immunological profile, and to determine the relationship between circulating autoantibody titers and lesion intensity and course of lesions under treatment. Leucocytosis was observed especially in group G2. All patients showed decreased relative CD3+ and CD4+ values and a tendency to decreased relative values of the CD8+ subpopulation. Blastic lymphocyte transformation indices in the presence of phytohemagglutinin were higher in patients (group G1+G2) than in controls. The indirect immunofluorescence test was positive in 100% of G2 patients and in 80% of G1 patients. The median value for the titers was higher in group G2 than in group G1. Analysis of the results as a whole permits us to conclude that cell immunity was preserved and that there was a relationship between antibody titers detected by the direct immunofluorescence test and extent of skin lesions.

Development and Validation of Predictive Models of Cardiac Mortality and Transplantation in Resynchronization Therapy

AbstractBackground:30-40% of cardiac resynchronization therapy cases do not achieve favorable outcomes.Objective:This study aimed to develop predictive models for the combined endpoint of cardiac death and transplantation (Tx) at different stages of cardiac resynchronization therapy (CRT).Methods:Prospective observational study of 116 patients aged 64.8 ± 11.1 years, 68.1% of whom had functional class (FC) III and 31.9% had ambulatory class IV. Clinical, electrocardiographic and echocardiographic variables were assessed by using Cox regression and Kaplan-Meier curves.Results:The cardiac mortality/Tx rate was 16.3% during the follow-up period of 34.0 ± 17.9 months. Prior to implantation, right ventricular dysfunction (RVD), ejection fraction < 25% and use of high doses of diuretics (HDD) increased the risk of cardiac death and Tx by 3.9-, 4.8-, and 5.9-fold, respectively. In the first year after CRT, RVD, HDD and hospitalization due to congestive heart failure increased the risk of death at hazard ratios of 3.5, 5.3, and 12.5, respectively. In the second year after CRT, RVD and FC III/IV were significant risk factors of mortality in the multivariate Cox model. The accuracy rates of the models were 84.6% at preimplantation, 93% in the first year after CRT, and 90.5% in the second year after CRT. The models were validated by bootstrapping.Conclusion:We developed predictive models of cardiac death and Tx at different stages of CRT based on the analysis of simple and easily obtainable clinical and echocardiographic variables. The models showed good accuracy and adjustment, were validated internally, and are useful in the selection, monitoring and counseling of patients indicated for CRT.

Beaufils ranges to assess the cotton nutrient status in the southern region of Mato Grosso

The relationships between nutrient contents and indices of the Diagnosis and Recommendation Integrated System (DRIS) are a useful basis to determine appropriate ranges for the interpretation of leaf nutrient contents. The purpose of this study was to establish Beaufils ranges from statistical models of the relationship between foliar concentrations and DRIS indices, generated by two systems of DRIS norms - the F value and natural logarithm transformation - and assess the nutritional status of cotton plants, based on these Beaufils ranges. Yield data from plots (average acreage 100 ha) and foliar concentrations of macro and micronutrients of cotton (Gossypium hirsutum r. latifolium) plants, in the growing season 2004/2005, were stored in a database. The criterion to define the reference population consisted of plots with above-average yields + 0.5 standard deviation (over 4,575 kg ha-1 seed cotton yield). The best-fitting statistical model of the relationship between foliar nutrient concentrations and DRIS indices was linear, with R² > 0.8090, p < 0.01, except for N, with R² = 0.5987, p < 0.01. The two criteria were effective to diagnose the plant nutritional status. The diagnoses were not random, but based on the effectiveness of the chi-square-tested method. The agreement between the methods to assess the nutritional status was 92.59-100 %, except for S, with 74.07 % agreement.

Analysis of translational errors in frame-based and frameless cranial radiosurgery using an anthropomorphic phantom

Abstract Objective: To evaluate three-dimensional translational setup errors and residual errors in image-guided radiosurgery, comparing frameless and frame-based techniques, using an anthropomorphic phantom. Materials and Methods: We initially used specific phantoms for the calibration and quality control of the image-guided system. For the hidden target test, we used an Alderson Radiation Therapy (ART)-210 anthropomorphic head phantom, into which we inserted four 5mm metal balls to simulate target treatment volumes. Computed tomography images were the taken with the head phantom properly positioned for frameless and frame-based radiosurgery. Results: For the frameless technique, the mean error magnitude was 0.22 ± 0.04 mm for setup errors and 0.14 ± 0.02 mm for residual errors, the combined uncertainty being 0.28 mm and 0.16 mm, respectively. For the frame-based technique, the mean error magnitude was 0.73 ± 0.14 mm for setup errors and 0.31 ± 0.04 mm for residual errors, the combined uncertainty being 1.15 mm and 0.63 mm, respectively. Conclusion: The mean values, standard deviations, and combined uncertainties showed no evidence of a significant differences between the two techniques when the head phantom ART-210 was used.

A quality and cost approach for welding process selection

The aim of this work was to propose, apply and evaluate a methodical approach to select welding processes in a productive environment based on market requirements of Quality and Costs. A case study was used. The welds were carried out in laboratory, simulating the joint conditions of a manufacturer and using several welding processes: SMAW, GTAW, pulsed GTAW, GMAW with CO2 and Ar based shielding gases and pulsed GMAW. For Quality analysis geometrical aspects of the beads were considered and for Cost analysis, welding parameters and consumable prices. Quantitative indices were proposed and evaluated. After that, evaluation of both Quality and Costs was done, showing to be possible to select the most suitable welding process to a specific application, taking into account the market conditions of a company.

Covalidation of Integral Transforms and Method of Lines in Nonlinear Convection-Diffusion with Mathematica

The Mathematica system (version 4.0) is employed in the solution of nonlinear difusion and convection-difusion problems, formulated as transient one-dimensional partial diferential equations with potential dependent equation coefficients. The Generalized Integral Transform Technique (GITT) is first implemented for the hybrid numerical-analytical solution of such classes of problems, through the symbolic integral transformation and elimination of the space variable, followed by the utilization of the built-in Mathematica function NDSolve for handling the resulting transformed ODE system. This approach ofers an error-controlled final numerical solution, through the simultaneous control of local errors in this reliable ODE's solver and of the proposed eigenfunction expansion truncation order. For covalidation purposes, the same built-in function NDSolve is employed in the direct solution of these partial diferential equations, as made possible by the algorithms implemented in Mathematica (versions 3.0 and up), based on application of the method of lines. Various numerical experiments are performed and relative merits of each approach are critically pointed out.

Holstein white coat color and performance: phenotypic, genetic and environmental correlations

Correlations of measures of percentages of white coat color, five measures of production and two measures of reproduction were obtained from 4293 first lactation Holsteins from eight Florida dairy farms. Percentages of white coat color were analyzed as recorded and transformed by an extension of Box-Cox procedures. Statistical analyses were by derivative-free restricted maximum likelihood (DFREML) with an animal model. Phenotypic and genetic correlations of white percentage (not transformed) were with milk yield, 0.047 and 0.097; fat yield, 0.002 and 0.004; fat percentage, -0.047 and -0.090; protein yield, 0.024 and 0.048; protein percentage, -0.070 and -0.116; days open, -0.012 and -0.065; and calving interval, -0.007 and -0.029. Changes in magnitude of correlations were very small for all variables except days open. Genetic and phenotypic correlations of transformed values with days open were -0.027 and -0.140. Modest positive correlated responses would be expected for white coat color percentage following direct selection for milk, fat, and protein yields, but selection for fat and protein percentages, days open, or calving interval would lead to small decreases.