Characterization of commercial cooked hams according to physicochemical, sensory, and textural parameters using chemometrics

Cooked ham is considered a high-value product due to the quality of its raw material. Although its consumption is still low in Brazil, it is increasing due to the rising purchasing power of sectors of the population. This study aimed to assess the microbiological, physicochemical, rheological, and sensory quality of cooked hams (n=11) marketed in Brazil. All samples showed microbiological results within the standards established by Brazilian legislation. Eight of the eleven samples studied met all the legal requirements; two samples violated the standards due to the addition of starch; one sample had lower protein content than the minimum required, and another one had sodium content higher than that stated on the label. The use of Hierarchical Cluster Analysis allowed the agglomeration of the samples into three groups with distinct quality traits and with significant differences in moisture content, chromaticity, syneresis, and heating and freezing loss. Principal Component Analysis showed that the samples which correlated to higher sensory acceptance regarding flavor and overall acceptability were those with higher moisture, protein, fat, and luminosity values. This study confirmed the efficacy of multivariate statistical techniques in assessing the quality of commercial cooked hams and in indicating the physicochemical parameters associated with the perception of product quality.

Polymorphisms in candidate genes and their association with carcass traits and meat quality in Nellore cattle

The objective of this work was to estimate the allele polymorphism frequencies of genes in Nellore cattle and associate them with meat quality and carcass traits. Six hundred males were genotyped for the following polymorphisms: DGAT1 (VNTR with 18 nucleotides at the promoter region); ANK1, a new polymorphism, identified and mapped here at the gene regulatory region NW_001494427.3; TCAP (AY428575.1:g.346G>A); and MYOG (NW_001501985:g.511G>C). In the association study, phenotype data of hot carcass weight, ribeye area, backfat thickness, percentage of intramuscular fat, shear force, myofibrillar fragmentation index, meat color (L*, a*, b*), and cooking losses were used. Allele B from the ANK1 gene was associated with greater redness (a*). Alleles 5R, 6R, and 7R from the DGAT1 VNTR gene were associated with increased intramuscular fat, reduced cooking losses and increased ribeye area, respectively. The single nucleotide polymorphism (SNP) of the TCAP gene was not polymorphic, and MYOG alleles were not associated with any of the evaluated characteristics. These results indicate that ANK1 and DGAT1 genes can be used in the selection of Nellore cattle for carcass and meat quality.

Carbon and nitrogen cycling in an integrated soybean-beef cattle production system under different grazing intensities

Abstract:The objective of this work was to evaluate the effect of grazing intensity on the decomposition of cover crop pasture, dung, and soybean residues, as well as the C and N release rates from these residues in a long-term integrated soybean-beef cattle system under no-tillage. The experiment was initiated in 2001, with soybean cultivated in summer and black oat + Italian ryegrass in winter. The treatments consisted of four sward heights (10, 20, 30, and 40 cm), plus an ungrazed area, as the control. In 2009-2011, residues from pasture, dung, and soybean stems and leaves were placed in nylon-mesh litter bags and allowed to decompose for up to 258 days. With increasing grazing intensity, residual dry matter of the pasture decreased and that of dung increased. Pasture and dung lignin concentrations and C release rates were lower with moderate grazing intensity. C and N release rates from soybean residues are not affected by grazing intensity. The moderate grazing intensity produces higher quality residues, both for pasture and dung. Total C and N release is influenced by the greater residual dry matter produced when pastures were either lightly grazed or ungrazed.

Water quality indicators for environmental and resistance profile of Escherichia coli strains isolated in Rio Cascavel, Paraná, Brazil

In this article it was evaluated the quality of water in the Cascavel river, in the city of Cascavel - Paraná using microbiological indicators, physical and chemical pollution and susceptibility / resistance in strains of Escherichia coli isolated antimicrobial trade. The water sampling was conducted between 2010-July and 2011-June at three points: a) near the source, b) urban area, c) rural area. The samples were analyzed for physical, chemical and microbiological variables: temperature, pH, color, turbidity, electrical conductivity, total nitrogen and total phosphorus, total coliforms (CT), fecal coliform (CTe) and Escherichia coli. Tests were also performed to nine antimicrobial commercial resistances. The variables studied indicated that the Cascavel river water was presented at disagreement with the resolution 357/2005 CONAMA (class I), ranking in the index as regular water quality. The physical, chemical and rainfall did not affect the growth of CT and CTe, with higher counts of E. coli in the urban area. The greatest resistance profiles of the strains of E. coli isolated from Cascavel river water was found in section 2, the urban area as a probable consequence of human influence on water quality.

Identification of main contamination points by hygiene indicator microorganisms in beef processing plants

The microbiological quality of beef and meat products is strongly influenced by the conditions of hygiene prevailing during their production and handling. Without proper hygienic control, the environment in slaughterhouses and butcher shops can act as an important source of microbiological contamination. To identify the main points of microbiological contamination in the beef processing chain, 443 samples of equipment, installations and products were collected from 11 establishments (1 slaughterhouse and 10 butcher shops) located in the state of Paraná, Brazil. The microbiological quality of all the samples was evaluated using Petri dishes to obtain counts of mesophilic aerobes (AC), total coliforms, Escherichia coli (EC), yeasts and molds (YM). The main contamination points identified in butcher shops, in decreasing order, were stainless steel boxes, beef tenderizers, grinders, knives, mixers, sausage stuffers, plastic boxes, floors and drains. In the slaughterhouse, these points were sausage stuffers, platforms, floors and drains. The most severely contaminated products were fresh sausages and ground beef. This information about the main points of microbiological contamination in the beef processing chain is expected to aid professionals responsible for hygiene in similar establishments to set up proper hygienic procedures to prevent or reduce microbiological contamination of beef and meat products.

Bacterial ecology of tilapia fresh fillets and some factors that can influence their microbial quality

The purpose of research was to investigate the bacterial ecology of tilapia (Oreochromis niloticus) fresh fillets and some factors that can influence its microbial quality. Samples of fish cultivation water (n = 20), tilapia tegument and gut (n = 20) and fresh fillets (n = 20) were collected in an experimental tilapia aquaculture located in the city of Lavras, Minas Gerais, Brazil. Staphylococcus spp., Aeromonas spp., Enterococcus spp. and Enterobacteriaceae were quantified using selective plating. For the enumeration of Pseudomonas spp., the most probable number technique (MPN) was utilized. Bacterial colonies (n = 198) were identified by Gram strain and biochemical tests. Aeromonas spp., Pseudomonas spp., Enterococcus spp. and Enterobacteriaceae were found in the cultivation water (water from a fishpond cultivation), tegument, gut, and fresh fillets. Staphylococcus spp. was not isolated in the cultivation water. Salmonella spp. was not detected. The count variable of 10 to 10³ CFU or MPN.(g or mL)-1. Associated to freshwater tilapia fillet processing, there is a large variety of microorganisms related to foodborne illnesses and fish products deterioration.

Evaluation of a new mathematical model to describe Clostridium perfringens growth during the cooling of cooked ground beef

A mathematical model previously developed to study microbial growth in food products under an isothermal environment was adapted to a time-varying temperature regime. The resulting model was applied to study the growth of Clostridium perfringens in meat products. This micro-organism is of particular relevance to public health and economy due to the loss of productivity caused by it. Results showed a similar performance of the model used compared to the Baranyi model under an isothermal situation and a slightly better performance under a non-isothermal temperature profile.

Evaluation of quality factors of bovine and chicken meat marinated with reduced sodium content

In many industrialized countries, including Brazil, sodium intake exceeds the nutritional recommendations. Excessive consumption is associated with hypertension and premature death by cardiovascular diseases. The industry's challenge is to produce products with reduced sodium that are similar to regular products in texture and flavor and consistent with consumers' dietary habits. The present study aimed at substituting 25 and 50% NaCl for KCl in marinated beef and chicken meat with the addition of aromatic herbs and spices. The following microbiological analyses were carried out: macronutrient, chemical composition, and sensorial analysis. The meats showed a reduction in NaCl contents without any changes in their physical and chemical characteristics, and the products´ quality and microbiological safety were maintained. Beef and chicken tenderness was maintained for both treatments. Furthermore, the use of 50% KCl did not cause any changes in the products' sensory quality, and the overall acceptance of both types of meat was maintained. Results showed that a reduction by 50% in the NaCl contents of marinated meat products with a combination of herbs and spices is possible. Future applications in other meat products and sausages are highly promising.

Okara, a soymilk industry by-product, as a non-meat protein source in reduced fat beef burgers

Okara is a by-product generated during the manufacture of soymilk and tofu. Wet okara was added to beef burgers at 0%, 20%, and 25%. The effects of okara on certain physicochemical, textural, and sensory properties of reduced fat beef burgers were investigated. The beef burgers formulated with okara (104.0-106.0 kcal/100 g) had 60% less calories than commercial beef burgers (268.8 kcal/100 g). The texture profile analysis showed that the addition of wet okara led to a significant increase in hardness (p < 0.05) and a concomitant reduction in the values of chewiness, springiness, and cohesiveness. Lower sensory scores (p < 0.05) of flavour were observed in the beef burgers containing 25% wet okara. However, the sensory evaluation results showed that juiciness, appearance, tenderness, and overall acceptability of beef burgers formulated with okara did not differ statistically from that of the control (0% okara). Wet okara (20%) can be used as a non-meat protein source in the production of reduced-fat beef burgers without changing their sensory quality.

Salted lamb meat blanket of Petrolina-Pernambuco, Brazil: process and quality

Salted lamb meat blanket, originated from boning, salting, and drying of whole lamb carcass, was studied aiming at obtaining information that support the search for guarantees of origin for this typical regional product from the city of Petrolina-Pernambuco-Brazil. Data from three processing units were obtained, where it was observed the use of a traditional local technology that uses salting, an ancient preservation method; however, with a peculiar boning technique, resulting in a meat product with great potential for exploitation in the form of meat blanket. Based on the values of pH (6.22 ± 0.22), water activity (0.97 ± 0.02), and moisture (69.86 ± 2.26) lamb meat blanket is considered a perishable product, and consequently it requires the use of other preservation methods combined with salt, which along with the results of the microbiological analyses (absence of Salmonella sp, score <10 MPN/g of halophilic bacteria, total coliforms between 6.7 × 10³ and 5.2 × 10(6) FUC/g, and Staphylococcus from 8.1 × 10³ CFU/g at uncountable) reinforce the need of hygienic practices to ensure product safety. These results, together with the product notoriety and the organization of the sector are important factors in achieving Geographical Indication of the Salted lamb Meat blanket of Petrolina.

Quality evaluation of parmesan-type cheese: a chemometric approach

Parmesan-type cheeses are the most consumed special cheeses in Brazil. It is generally sold in retail shops, either grated or in wedge-shaped pieces, and its quality varies considerably, which is reflected directly in its price. There is lack of processing standardization and, since the ripening period is fundamental for the quality of this hard, semi-fat cooked cheese, this stage seems to be the thin line between low and high quality products. It is important to note that the Italian Parmegiano Reggiano is matured for a period of twelve months, as well as its rival Grana Padano, and this long ripening period causes changes making them gourmet, highly-valued cheeses. In the present study, twelve different Parmesan-type cheeses were purchased from the Brazilian retail market and evaluated for microbiological, physicochemical, and instrumental parameters. Heterogeneous quality was confirmed by microbiological problems detected in the samples and physicochemical composition that did not meet current Brazilian specifications. The use of principal component analysis and hierarchical cluster analysis made it possible to separate the samples into three distinct groups, mainly due to different acidity and moisture levels, water activity, and hardness values. The price per kg was also considered and was correlated with moisture, acidity, and texture.

Postharvest quality of cocona (Solanum sessiliflorum Dunal) stored under ambient condition

Cocona (Solanum sessiliflorum Dunal) is an important genetic resource that has been traditionally used for a variety of purposes, including food, medical and cosmetics applications. The objective of this study was evaluated the quality and the period of postharvest shelf life of cocona 'Mosquet", through the physical, chemical and physiological characterization of fruits stored under the ambient conditions. Physiologically mature fruits were harvested from an orchard, washed with tap water and soaked in a solution of the fungicide Prochloraz (49.5 g/100 L of water) for 5 minutes. After air drying, the fruits were packed in plastic containers and stored at 24 ± 2 ºC and relative humidity 60 ± 5% for 15 days. The fruits developed a respiratory climacteric respiratory patern and remained fit for consumption up to day 6 of storage, that is, without visual symptoms of loss of water and firmness. At this stage, the fruits showed firmness of 117,42 kPa, soluble solids of 6.62º Brix and citric acid of 1.22 %.

Influence of the N/K ratio on the production and quality of cucumber in hydroponic system

The objective of this work was to evaluate the quality of fruits and the nutritional status of cucumber CV. Aodai cultivated in nutrient solutions with different N:K ratios. The hydroponic cultivation was initially performed, during the vegetative growth, in nutrient solution with 1:2.0 mmol L-1 N:K, and, later, during fruit setting, in four different nutrient solutions with N:K (w/w) at the ratios 1:1.4, 1:1.7, 1:2.0 and 1:2.5. An additional treatment with a nutrient solution containing the ratio 1:2.2 (w/w) N:K during the vegetative growth and N:K 1:1.4 (w/w) during fruit setting, both with 10% ammonium (NH4+) was included. The treatments were arranged in a randomized design with six replicates. Irrigation was carried out with deionized water until seed germination, and then with nutrient solution until 30 days after germination, when plants were transplanted. Plants in the hydroponic growing beds were irrigated with the solutions for vegetative growth, and, after 21 days, the solutions were replaced by solutions for fruit setting. At 45 and 60 days after transplanting, the fresh weight, length, diameter, volume and firmness of the fruit were evaluated, and, at 45 days after transplanting, the macronutrient concentrations in the leaves were determined. The use of different N:K ratios during fruit setting influenced the cucumber production. The ratio of 1.0:1.7 N: K (w/w), with 10% of N in the form of ammonia, is recommended for the whole cycle.

Lignification of the plant and seed quality of RR soybeans sprayed with herbicide glyphosate

Differences in levels of lignin in the plant between conventional and transgenic cultivars RR has been reported by several authors, however, there are few studies evaluating the influence of spraying of glyphosate on the lignin in the plant and RR soybean seeds. The aim of this study was to evaluate the physiological quality of RR transgenic soybean seeds and the lignin contents of plants sprayed with the herbicide glyphosate. The assays were conducted both in greenhouse and field in the municipality of Lavras, MG, in the agricultural year 2007/08. The experiment was arranged in a splitplot design with four replicates, considering the treatments hand weeding and herbicide glyphosate as plots, and five RR soybean cultivars (BRS 245 RR, BRS 247 RR, Valiosa RR, Silvânia RR and Baliza RR) as splitplots. In the greenhouse, the cultivars tested were BRS 245 RR and Valiosa RR in a randomized block design with four replicates. The sprayings were carried out at stages V3, V7 and early R5 (3L/ha). The 1000 seed weight, mechanical injury, germination and germination velocity index, emergence velocity index, accelerated aging, electrical conductivity and water soaking seed test, lignin content in the seed coat, in the stem and legumes were determined. The spraying of glyphosate herbicide, in greenhouse and field, did not alter the physiological quality of seeds and the lignin contents in the plant.