Comparative studies on the biology and filarial susceptibility of selected blood-feeding and autogenous Aedes togoi sub-colonies

Blood-feeding and autogenous sub-colonies were selected from a laboratory, stock colony of Aedes togoi, which was originally collected from Koh Nom Sao, Chanthaburi province, Southeast Thailand. Comparative biology and filarial susceptibility between the two sub-colonies (blood-feeding: F11, F13; autogeny: F38, F40) were investigated to evaluate their viability and vectorial capacity. The results of comparison on biology revealed intraspecific differences, i.e., the average egg deposition/gravid female (F11/F38; F13/F40), embryonation rate (F13/F40), hatchability rate (F11/F38; F13/F40), egg width (F11/F38), wing length of females (F13/F40), and wing length and width of males (F11/F38) in the blood-feeding sub-colony were significantly greater than that in the autogenous sub-colony; and egg length (F11/F38) and width (F13/F40), and mean longevity of adult females (F11/F38) and males (F13/F40) in the blood-feeding sub-colony were significantly less than that in the autogenous sub-colony. The results of comparison on filarial susceptibility demonstrated that both sub-colonies yielded similar susceptibilities to Brugia malayi [blood-feeding/autogeny = 56.7% (F11)/53.3%(F38), 60%(F13)/83.3%(F40)] and Dirofilaria immitis [blood-feeding/autogeny = 85.7%(F11)/75%(F38), 45%(F13)/29.4%(F40)], suggesting autogenous Ae. togoi sub-colony was an efficient laboratory vector in study of filariasis.

Coronary bilateral ostial enlargement using the saphenous vein in a patient with syphilitic aortitis

A patient with tertiary syphilis presenting with bilateral coronary ostial lesions and aortic regurgitation underwent surgical reconstruction of the coronary ostia by the anterior approach with autogenous saphenous vein grafting and substitution of the aortic valve with a bovine bioprosthesis. The procedure was easily performed and had good outcomes both early and late. The rarity of the association of a lesion in both coronary ostia with aortic regurgitation in syphilis and the surgical technique employed are discussed.

Age Structure of Adult Mosquito (Diptera: Culicidae) Populations from Buenos Aires Province, Argentina

In order to detect seasonal trends in the age structure of adult mosquitoes from Buenos Aires province, Argentina, female populations were sampled with CDC traps during 1989-1991 in Punta Lara and La Plata. The mosquitoes were dissected and age-grouped according to ovarian tracheation and ovariolar stages. All Runchomyia paranensis females were parous, suggesting that this species could be autogenous. Aedes albifasciatus showed parous peaks following population peaks, with shorter delays in spring-summmer and longer in fall-winter. Ae. crinifer and Culex dolosus showed wide fluctuations in age structure due to adult emergences during all months. Psorophora ferox showed high population replacement rates. Mansonia indubitans and Ma. titillans have few generations per year during their activity period. This is the first report on age-grading of adults of field mosquito populations from Argentina

Diversity of sandflies (Psychodidae: Phlebotominae) captured in sandstone caves from Central Amazonia, Brazil

In the present paper we describe the diversity of phlebotomine sandflies collected in three sandstone caves in the municipality of Presidente Figueiredo, state of Amazonas, Brazil. The phlebotomines were captured during 2006 with CDC light traps. Guano samples from inside the Gruta Refúgio do Maruaga were collected to investigate the presence of immature specimens. A total of 2,160 adult phlebotomines representing 15 species were captured. Pintomyia pacae was the dominant species in Gruta dos Animais (1,723 specimens) and Gruta dos Lages (50 specimens) and Deanemyia maruaga new comb (280 specimens) was the dominant species in Gruta Refúgio do Maruaga. A total of 18 guano samples were collected and seven of these samples included immature specimens. A total of 507 immature specimens were captured; 495 of these specimens were larvae and 12 were pupae. The presence of paca (Agouti paca) footprints near Gruta dos Animais and Gruta dos Lages suggests the association of Pi. pacae with this rodent. This finding may explain the abundance of Pi. pacae in these locations, while the species is relatively rare in the forest. Deanemyia maruaga is a cave species that uses guano to breed during its immature stages. Adult specimens of this species are apparently parthenogenetic and autogenous and represent the second record of parthenogenesis for the subfamily Phlebotominae.

Sharing competences in strategic alliances: a case study of the Cosan and Shell biofuel venture

In a competitive world, the way a firm establishes its organizational arrangements may determine the enhancement of its core competences and the possibility of reaching new markets. Firms that find their skills to be applicable in just one type of market encounter constraints in expanding their markets, and through alliances may find a competitive form of value capture. Hybrid forms of organization appear primarily as an alternative to capturing value and managing joint assets when the market and hierarchy modes do not present any yields for the firm's competitiveness. As a result, this form may present other challenging issues, such as the allocation of rights and principal-agent problems. The biofuel market has presented a strong pattern of changes over the last 10 years. New intra-firm arrangements have appeared as a path to participate or survive among global competition. Given the need for capital to achieve better results, there has been a consistent movement of mergers and acquisitions in the Biofuel sector, especially since the 2008 financial crisis. In 2011 there were five major groups in Brazil with a grinding capacity of more than 15 million tons per year: Raízen (joint venture formed by Cosan and Shell), Louis Dreyfus, Tereos Petrobras, ETH, and Bunge. Major oil companies have implemented the strategy of diversification as a hedge against the rising cost of oil. Using the alliance of Cosan and Shell in the Brazilian biofuel market as a case study, this paper analyses the governance mode and challenging issues raised by strategic alliances when firms aim to reach new markets through the sharing of core competences with local firms. The article is based on documentary research and interviews with Cosan's Investor Relations staff, and examines the main questions involving hybrid forms through the lens of the Transaction Cost Economics (TCE), Agency Theory, Resource Based View (RBV), and dynamic capabilities theoretical approaches. One focal point is knowledge "appropriability" and the specific assets originated by the joint venture. Once the alliance is formed, it is expected that competences will be shared and new capabilities will expand the limits of the firm. In the case studied, Cosan and Shell shared a number of strategic assets related to their competences. Raízen was formed with economizing incentives, as well to continue marshalling internal resources to enhance the company's presence in the world energy sector. Therefore, some challenges might be related to the control and monitoring agents' behavior, considering the two-part organism formed by distinctive organizational culture, tacit knowledge, and long-term incentives. The case study analyzed illustrates the hybrid arrangement as a middle form for organizing the transaction: neither in the market nor in the hierarchy mode, but rather a more flexible commitment agreement with a strategic central authority. The corporate governance devices are also a challenge, since the alignment between the parent companies in the joint ventures is far more complex. These characteristics have led to an organism with bilateral dependence, offering favorable conditions for developing dynamic capabilities. However, these conditions might rely on the partners' long-term interest in the joint venture.

Esfoliação e hidratação da caulinita após intercalação com uréia

Well-ordered Georgia kaolinite (Kga-1b) obtained from the source Clay Repository of the Clay Minerals Society (USA) was intercalated with urea using grinding procedures. To achieve complete intercalation 20% of urea (in weight) was used, producing Al2Si2O5(OH)4 (N2H4CO)0,86 with an interplanar basal spacing of 1,08nm. After washing with water under ultrasound stirring at 363K, urea was completely removed and kaolinite was partially exfoliated. After drying under air, the material was converted to hydrated kaolinite with the composition Al2Si2O5(OH)4 (H2O)0,64 and an interplanar basal spacing of 0,84nm. In this compound, water molecules positioned between the layers of the silicate can be removed after calcination at 573K, regenerating structurally disordered kaolinite.

Preparação de amostra de fígado bovino e estudo de micro homogeneidade para a determinação de Cd E Pb por espectrometria de absorção atômica com atomização eletrotérmica e amostragem direta de sólido

This work describes a systematic study for bovine liver sample preparation for Cd and Pb determination by solid sampling electrothermal atomic absorption spectrometry. Samples were prepared using different procedures: (1) drying in a household microwave oven followed by drying in a stove at 60 ºC until constant mass, and (2) freeze-drying. Ball and cryogenic mills were used for grinding. Particle size, sample size and micro sample homogeneity were investigated. All prepared samples showed good homogeneity (He < 10) even for low sample mass, but samples dried in a microwave oven/stove and ground in a ball mill presented the best homogeneity.

Estudo comparativo entre sílica obtida por lixívia ácida da casca de arroz e sílica obtida por tratamento térmico da cinza de casca de arroz

A comparison between silica by acid leaching of rice husk (RH) and silica obtained from thermal treatment of rice husk ash (RHA) is presented. The best leaching results were obtained using 10% hydrochloric acid followed by washing with water. The alternative method, calcination of RHA at 700 ºC for 6 h followed by grinding for 80 min, was more effective. Silica obtained from RH was about 97% amorphous, had a 17.37 µm mean particle size, and a specific surface area of 296 m²/g. On the other hand, for silica obtained from RHA the values were about 95% amorphous material 0.68 µm, and 81 m²/g.

Síntese hidrotermal de sodalita básica a partir de um rejeito de caulim termicamente ativado

Basic sodalite was successfully synthesized by hydrothermal method using kaolin waste as source of Aluminum and Silicon. This waste is mainly composed by kaolinite and is produced in large amount by kaolin processing industries for paper coating from the Amazon region. Initially, the waste has been calcined at 700 ºC for 2 h and then reacted with the following solutions: Na2CO3 and mixture of Na2CO3 + NaOH to 150 ºC with autogenous pressure for 24 h. The raw materials and transformed materials were characterized by XRD, FTIR and SEM. In both studied media, well-crystallized, basic sodalite was the only phase synthesized, while in the literature usually a mixture of zeolites is obtained.

Efeito da ativação mecânica de uma formulação de talco/caulim/alumina sobre o mecanismo e a cinética de formação de cordierita

In this study, the influence of mechanical activation by intensive ball milling of a stoichiometric mixture of talc, kaolin, and alumina on the mechanism and kinetics of cordierite (2MgO·2Al2O3·5SiO2) formation was evaluated. The raw materials were characterized by chemical analysis, X-ray diffraction (XRD), laser diffraction, and helium pycnometry. The kinetics and mechanism of cordierite formation were studied by XRD, differential thermal analysis, and dilatometry in order to describe the phase formation as a function of temperature (1000-1400 ºC), time of thermochemical treatment (0-4 h), and grinding time of the mixture (0-45 min). Finally, the optimal conditions of the thermochemical treatment that ensured the formation of cordierite were determined: milling time of 45 min and thermal treatment at 1280 ºC for 1 h.

Diretrizes para a construção de um moinho de bolas para a moagem de sólidos em laboratórios

In this paper, we show the construction of a low-cost, high-quality ball mill for obtaining finely divided powders, with the goal of presenting guidelines for achieving the best results for the milling process. This equipment allows for the adjustment of the size of the mill in order to process different quantities of material. The construction of mechanical and electrical components that provide increased efficiency, the choice of milling medium, and frequent problems experienced with homemade ball mills are discussed.

Evaluation of the effect of the seed extract of Moringa oleifera Lam over the efficiency of organic filters in wastewater treatment of dairy cattle breeding

This study aimed to evaluate the effect of Moringa oleifera Lam extract on the removal of total solids (TS), total suspended solids (TSS) and chemical oxygen demand (COD), in different filter media for treating wastewater of dairy cattle breeding (DCW). The moringa seed extract was obtained by grinding 50 g of seeds in one liter of distilled water and, after passing the solution through a quantitative paper filter of 25 microns, 60 mL of the extract were added to wastewater from cattle breeding before the filtration process in organic filters made of thin coal, bamboo leaves, eucalyptus leaves, gliricidia branches and sawdust. This was followed by the completely randomized experimental design, adopting a factorial of 5 x 2. Aliquots of filtered effluent were collected and the total solids (TS) concentrations, total suspended solids (TSS) and chemical oxygen demand (COD) were determined. It was found that the increase in the efficiency of removal of COD and total solids can be attributed to the coagulating power of the moringa seed extract, wherein the filter medium with bamboo leaves presented the best performance, showing potential for use as alternative filter material in the primary treatment of DCW.

Monitoring of mechanical sugarcane harvesting through control charts

ABSTRACT Statistical process control in mechanized farming is a new way to assess operation quality. In this sense, we aimed to compare three statistical process control tools applied to losses in sugarcane mechanical harvesting to determine the best control chart template for this quality indicator. Losses were daily monitored in farms located within Triângulo Mineiro region, in Minas Gerais state, Brazil. They were carried over a period of 70 days in the 2014 harvest. At the end of the evaluation period, 194 samples were collected in total for each type of loss. The control charts used were individual values chart, moving average and exponentially weighted moving average. The quality indicators assessed during sugarcane harvest were the following loss types: full grinding wheel, stumps, fixed piece, whole cane, chips, loose piece and total losses. The control chart of individual values is the best option for monitoring losses in sugarcane mechanical harvesting, as it is of easier result interpretation, in comparison to the others.

Reconstrução da parede torácica nos defeitos adquiridos

Acquired chest wall defects present a challenging problem for thoracic surgeons. Many of such defects can be repaired with the use of local and regional musculocutaneous flaps, but larger defects compromising skeletal structure require increasingly sophisticated reconstructive techniques. The following discussion will review the options for repair acquired chest wall defects based in literature. The authors searched the Pubmed (www.pubmed.com) and found citations from January 1996 to February 2008. By reading the titles and the abstracts most of the citations were discharged because they focused in congenital chest wall defects or were cases report. However, many papers were found describing the outcome of large series of patients with acquired chest wall deformities. A review of recent literature shows that the repair of chest wall defects with soft tissues, if possible, remains the treatment of choice. Large chest wall defects require skeletal reconstruction to prevent paradoxical respiration. The selection of the most appropriate flap is primary dictated by the location and the size of the defect. It is important to transfer tissue with good vitality, so understanding the vascular supply is imperative. Autogenous grafts have been used in the past for skeletal reconstruction but a combination of synthetic materials with musculocutaneous flaps has been used lately. Based in the literature, the use of prosthetic material in chest wall reconstruction does not significantly increases the risk of wound infection.

O retalho pleural na perfuração do esôfago torácico

The thoracic esophageal perforations frequently complicate with fistula when submitted to primary suture. The use of autogenous tissues, like pleura, to reinforce the primary suture has proved to be useful in reduce the incidence of fistulas or at least the severity of the leaks in case they occur. The mortality has reduced too, consequently. A case of an extensive esophageal perforation is presented, where the use of pleural wrap to reinforce the esophagorrafy was very important to contain the leak and to permit a good evolution of the patient.