Measuring air pressure with a polymeric gas sensor

In this communication we describe the application of a conductive polymer gas sensor as an air pressure sensor. The device consists of a thin doped poly(4'-hexyloxy-2,5-biphenylene ethylene) (PHBPE) film deposited on an interdigitated metallic electrode. The sensor is cheap, easy to fabricate, lasts for several months, and is suitable for measuring air pressures in the range between 100 and 700 mmHg.

Propulsor pneumático versátil e isento de pulsação para sistemas de análise em fluxo

Aquarium air pumps are proposed and evaluated as pneumatic liquid propulsion devices for flow injection and continuos flow analysis (FIA and CFA) systems. This kind of pump is widely available at a very low cost and it can sustain a pressure around of 4 psi (0.28 bar) indefinitely. By applying this air pressure onto a solution contained in a reservoir flask, it is possible to reach flow rates of up to 12.5 mL min-1 for circuits comprising reactors, made from 0.8 i.d. tubing with a length of 100 cm. The precise adjustment of flow rate below the maximum one can be made with a simplified needle valve or inserting in series a short length of capillary tube. The absence of flow pulsation is a definite advantage in comparison with peristaltic pumps, especially when amperometric detection is elected, as confirmed experimentally in FIA and CF applications.

Uso da pressão gerada por uma coluna de água para controle da vazão em sistemas de análises em fluxo

This work presents a new approach to control the flow rate in hydrodynamic flow experiments. The combination of air pressure generated by an aquarium air pump and the pressure generated by a water column were used for this purpose. This device supports a stable flow rate without pulsation for a long period of time. Furthermore, the flow rate can be easily controlled at various values in one or more streams. The performance of this approach was investigated using Fe(CN)6(4-) solutions in flowing systems using amperometric and voltammetric detection in wall-jet configuration. The results showed that the performance of the proposed device was better than a commercial peristaltic pump. It suggests that this approach can be used successfully in flow analysis systems.

PYROLIGNEOUS LIQUOR PRODUCED FROM ACACIA MEARNSII DE WILD WOOD UNDER CONTROLLED CONDITIONS AS A RENEWABLE SOURCE OF CHEMICALS

Acacia mearnsii de Wild (black wattle) is one of the most important trees planted in Southern Brazil for tannin extraction and charcoal production. The pyrolysis of the black wattle wood used for obtaining charcoal is performed in brick ovens, with the gas fraction being sent directly into the environment. The present study examines the condensable compounds present in the liquor produced from black wattle wood at different thermal degradation conditions, using gas chromatography coupled with mass spectrometry (GC/MS). Branches of black wattle were thermally degraded at controlled ambient and temperature conditions. Overall, a higher variety of compounds were obtained under atmospheric air pressure than under synthetic air pressure. Most of the tentatively identified compounds, such as carboxylic acids, phenols, aldehydes, and low molecular mass lignin fragments, such as guayacol, syringol, and eugenol, were products of lignin thermoconversion. Substituted aromatic compounds, such as vanillin, ethyl vanillin, and 2-methoxy-4-propeny-phenol, were also identified. At temperatures above 200 ºC, furan, 2-acetylfuran, methyl-2-furoate, and furfural, amongst others, were identified as polysaccharide derivatives from cellulose and hemicellulose depolymerization. This study evidences the need for adequate management of the condensable by-products of charcoal production, both for economic reasons and for controlling their potential environmental impact.

Obese obstructive sleep apnea patients with tonsil hypertrophy submitted to tonsillectomy

The physiopathology of obstructive sleep apnea-hypopnea syndrome (OSAHS) is multifactorial and obesity has been shown to be one of the main factors correlated with its occurrence. In obese patients with anatomical alterations of the upper airways it is often difficult to predict success for surgical correction since obesity is a limiting factor. Therefore, the aim of the present study was to evaluate the results of tonsillectomy in a specific group of patients, i.e., obese OSAHS patients with tonsil hypertrophy. Seven OSAHS patients with moderate obesity with obstructive palatine tonsil hypertrophy were submitted to tonsillectomy. All patients were submitted to pre- and postoperative appraisal of body mass index, otorhinolaryngology examination and polysomnography. Patients' average age was 36.4 ± 10.3 years and average preoperative body mass index was 36.6 ± 6.3 kg/m². Postoperative weight did not differ significantly from preoperative weight (P = 0.27). Average preoperative apnea and hypopnea index (AHI) was 81 ± 26/h and postoperative AHI was 23 ± 18/h (P = 0.0005). Average preoperative minimum oxyhemoglobin saturation (SaO2 min) was 69 ± 14% and the postoperative value was 83 ± 3% (P = 0.038). In relation to AHI, 6 (86%) of the 7 patients studied showed a reduction of 50% in relation to preoperative level and of these, 4 (57%) presented AHI of less than 20%. Only one patient presented a reduction of less than 50% in AHI, but even so showed improved SaO2 min. Tonsillectomy treatment for OSAHS in obese patients with obstructive palatine tonsil hypertrophy caused a significant reduction in AHI, with improvement in SaO2 min. This procedure could be eventually considered as an option of treatment for obese OSAHS patients with significant tonsil hypertrophy when continuous positive air pressure therapy is not possible as the first choice of treatment.