Fracture modes and acoustic emission characteristics of hydrogen-assisted cracking in high-strength low-alloy steel weldment

The aim of the present paper is to study the relationship between the fracture modes in hydrogen-assisted cracking (HAC) in microalloied steel and the emission of acoustic signals during the fracturing process. For this reason, a flux-cored arc weld (FCAW) was used in a high-strength low-alloy steel. The consumable used were the commercially available AWS E120T5-K4 and had a diameter of 1.6 mm. Two different shielding gases were used (CO2 and CO2+5% H2) to obtain complete phenomenon characterization. The implant test was applied with three levels of restriction stresses. An acoustic emission measurement system (AEMS) was coupled to the implant test apparatus. The output signal from the acoustic emission sensor was passed through an electronic amplifier and processed by a root mean square (RMS) voltage converter. Fracture surfaces were examined by scanning electron microscopy (SEM) and image analysis. Fracture modes were related with the intensity, the energy and the number of the peaks of the acoustic emission signal. The shielding gas CO2+5% H2 proved to be very useful in the experiments. Basically, three different fracture modes were identified in terms of fracture appearance: microvoid coalescence (MVC), intergranular (IG) and quasi-cleavage (QC). The results show that each mode of fracture presents a characteristic acoustic signal.

Decomposition of ground biomass of secondary forest and yield of annual crops in no tillage

ABSTRACT The objective of this work was to evaluate the dynamics of decomposition process of chopped secondary forest system, previously enriched with legumes Inga velutina Willd. and Stryphnodendron pulcherrimum (Willd.) Hochr. and the contribution of this process to the nutrient input to the cultivation of corn and bean under no-tillage. The experimental design was a randomized block, split plot with four replications. The plots were two species (I. velutina and S. pulcherrimum) and the subplots were seven times of evaluation (0, 7, 28, 63, 189, 252, 294 days after experiment installation). There was no difference (p ≥ 0.05) between the secondary forest systems enriched and no interaction with times for biomass waste, decomposition constant and half-life time. The waste of S. pulcherrimum trees had higher (p < 0.05) C/N ratio than that I. velutina. However, this one was higher (p < 0.05) in lignin content. Nevertheless, the dynamics of residue decomposition was similar. The corn yield was higher (p < 0.05) in cultivation under I.velutina waste. Meanwhile, the beans planted after corn, shows similar (p > 0.05) yield in both areas, regardless of the waste origin.

Assessment of hydrochemical quality of ground water under some urban areas within sana'a secreteriat

Groundwater from nine wells of three different districts, located at Sana'a secretariat was analyzed for hydrochemical quality assessment. Measurements of water quality parameters including pH, EC, CO3(2-), HCO3-, Cl-, NO3-, SO4(2-), Ca2+, Mg2+, Fe3+, K+, and Na+ were carried out . Classification of the groundwater samples according to Cl, SO4(2-), CO3(2-) and HCO3-, hardness (H), total dissolved solids (TDS), base-exchange, and meteoric genesis was demonstrated. Suitability of ground water samples for irrigation and industrial uses according to sodium adsorption ration (SAR), ratio of dissolved sodium (RDS), residual sodium carbonate (RSC) and saturation index (SI) was also investigated. The results of this study showed that almost all ground water samples were of good quality that makes them suitable for drinking and domestic uses. Results also indicated that even though some of the ground water samples were suitable for irrigation purposes, almost all of them were found not be good for industrial uses. Despite all drawbacks of the sewerage system built around Sana'a secretariat at the beginning of the first decade of the third millennium, the results of this study indicate that there is scope of significant improvement in Sana'a secretariat ground water quality.

Eucalyptus growth in silvopastoral system under different crown dia meters

The aim of this study was to evaluate the effect of different crown diameters on the early growth of eucalyptus intercropped with Brachiaria decumbens in a silvopastoral system. The experiment was conducted in a B. decumbens established pasture, where hybrid eucalyptus urograndis (clone GG100) was planted, spaced 8 x 3 m. A randomized block design was used, with six replicates. Treatments consisted of five crown diameters (0.0, 1.0, 1.5, 2.0, and 3.0 m) surrounding the eucalyptus plants. Five weeding hoes were performed throughout the experiment, according to the different crown diameters, aiming to maintain the eucalyptus plants free from B. decumbens interference. At 90, 180, 270, and 360 DAP, the height and the diameter of the eucalyptus plants were evaluated, and at 360 DAP, surface biomass and leaf area were evaluated. At 90 DAP, it was verified that the non-weeded plants had lower growth, compared to those submitted to crowns. Crown diameters of 2.51 and 2.64 m allowed greater growth in height and diameter at ground level of eucalyptus plants, respectively, in all periods evaluated. Biomass production and leaf area per plant at 360 DAP were also influenced by the different crown diameters. It was concluded that crown diameter around 2 meters provided favorable conditions for early growth of eucalyptus and less involvement in the area occupied by forage.

Volunteer RR® corn management in roundup ready® soybean-corn succession system

The present study evaluated the effects of cover crops (Pennisetum glaucum, Crotalaria spectabilis and Urochloa ruziziensis) associated with the application of herbicides {glyphosate; (glyphosate + haloxyfop-R); (glyphosate + fluazifop-p-butyl); (glyphosate + imazethapyr) and (glyphosate + imazaquin)} in soybean desiccation management for volunteer RR® corn control. The experiment was conducted under field conditions at Sinop-MT, during the 2013/2014 crop season, in a randomized complete blocks design with factorial scheme and four replications. The following parameter were evaluated: dry matter of cover crops and ground coverage rate, control of volunteer RR® corn present at the time of desiccation, dry matter, height and intoxication level on soybean plants caused by herbicides at 7, 14 and 28 days after emergence (DAE), control of volunteer RR® corn derived from emergence fluxes subsequent to desiccation management and soybean yield. The joint application of (glyphosate + haloxyfop-R) provided the best level of volunteer RR® corn control present at the time of desiccation. Satisfactory control (80%) of volunteer corn was obtained with the application of (glyphosate + imazethapyr). This treatment displayed an additional residual effect of imazethapyr, which efficiently controled volunteer RR® corn derived from fluxes subsequent to desiccation management, especially in treatments performed under U. ruziziensis straw. None of the herbicides used in desiccation management caused any significant effect on dry matter, height and phytotoxicity of soybean plants at 7, 14 and 28 DAE nor on grain yield.

Design of automatic control system for the precipitation of bromelain from the extract of pineapple wastes

In this work, bromelain was recovered from ground pineapple stem and rind by means of precipitation with alcohol at low temperature. Bromelain is the name of a group of powerful protein-digesting, or proteolytic, enzymes that are particularly useful for reducing muscle and tissue inflammation and as a digestive aid. Temperature control is crucial to avoid irreversible protein denaturation and consequently to improve the quality of the enzyme recovered. The process was carried out alternatively in two fed-batch pilot tanks: a glass tank and a stainless steel tank. Aliquots containing 100 mL of pineapple aqueous extract were fed into the tank. Inside the jacketed tank, the protein was exposed to unsteady operating conditions during the addition of the precipitating agent (ethanol 99.5%) because the dilution ratio "aqueous extract to ethanol" and heat transfer area changed. The coolant flow rate was manipulated through a variable speed pump. Fine tuned conventional and adaptive PID controllers were on-line implemented using a fieldbus digital control system. The processing performance efficiency was enhanced and so was the quality (enzyme activity) of the product.