Nickel incorporation in Fe(II, III) hydroxysulfate Green Rust: effect on crystal lattice spacing and oxidation products

Ni(II)-Fe(II)-Fe(III) layered double hydroxides (LDH) or Ni-containing sulfate green rust (GR2) samples were prepared from Ni(II), Fe(II) and Fe(III) sulfate salts and analyzed with X ray diffraction. Nickel is readily incorporated in the GR2 structure and forms a solid solution between GR2 and a Ni(II)-Fe(III) LDH. There is a correlation between the unit cell a-value and the fraction of Ni(II) incorporated into the Ni(II)-GR2 structure. Since there is strong evidence that the divalent/trivalent cation ratio in GR2 is fixed at 2, it is possible in principle to determine the extent of divalent cation substitution for Fe(II) in GR2 from the unit cell a-value. Oxidation forms a mixture of minerals but the LDH structure is retained if at least 20 % of the divalent cations in the initial solution are Ni(II). It appears that Ni(II) is incorporated in a stable LDH structure. This may be important for two reasons, first for understanding the formation of LDHs, which are anion exchangers, in the natural environment. Secondly, this is important for understanding the fate of transition metals in the environment, particularly in the presence of reduced Fe compounds.

Fe (ii) adsorption on Ucides Cordatus crab shells

In this study Ucides cordatus crab shells were utilized as Fe (II) sorbent as material of low cost and simple preparation. Values of pH of standard solution, biosorbent mass, particles size, contact time (t c) and initial concentration of the standard solution were optimized. The best conditions were pH = 2.00, t c = 840 min and Mc = 0.25 g. The kinetic pseudo first-order model displayed the best description of the adsorption process and the equilibrium study showed that the Langmuir model better describes the adsorption of the Fe (II). There is great affinity between the Fe (II) and the biosorbent.

Sulfitos duplos contendo cobre (I) e um metal de transição M(II) tipo Cu2SO3.M(II)SO3.2H 2O [M(II) = Cu(II), Fe(II), Mn(II) e Cd(II)]: preparação e seletividade na incorporação de M(II)

The metal-catalyzed autooxidation of S(IV) has been studied for more than a century without a consensus being obtained as to reaction rates, rate laws or mechanisms. The main objective in this work was to explore the reaction between Cu(II) and SO2 in the presence of M(II), paying special attention to the formation of double sulfites like Cu2SO3.M(II)SO3.2H 2O. The two principal aspects studied were: i) a new way to prepare double sulfites with high purity degree and the selectivity in the M(II) incorporation during the salt formation.

Determinação do íon ferro em preparações farmacêuticas através da cromatografia planar e espectrofotometria

Os autores estudaram o comportamento cromatográfico de preparações farmacêuticas comerciais contendo o íon Fe (II). Utilizando celulose microcristalina/Propanol: ácido clorídrico 4 N: ácido acético concentrado: ácido nítrico concentrado: clorofórmio (40: 5: 5: 10: 10), como sistema cromatográfico e alizarina como reagente de detecção, Fe (II), Mn (II), Mg (II), Cu (II), Zn (II) e Ca (II) foram separados e identificados pela Cromatografia Planar. O Fe (II) foi determinado pela reação com a ortofenantrolina, resultando em solução adequada para quantificação colorimétrica.

Estudo da estabilidade do complexo ácido fítico e o íon Ni(II)

A técnica de titulação potenciométrica foi utilizada para verificar as propriedades ácida-base do ácido fítico [1,2,3,4,5,6-hexaquis(dihidrogenofosfato)-mio-inositol] e do complexo ácido fítico e Ni(II), em solução aquosa, em temperatura e força iônica constantes. Para avaliar o comportamento térmico e a complexação do ácido fítico com o íon Ni(II) foram realizadas análises de Termogravimetria (TG), Termogravimetria Derivada (DTG), Calorimetria Exploratória Diferencial (DSC) e estudos de Espectrofotometria de Infravermelho. Foram obtidas oito constantes de protonação da amostra de ácido fítico na forma de sal de dipotássio e sete constantes de estabilidade do complexo ácido fítico e Ni(II). As reações de protonação e de formação ocorrem na faixa de pH de 2,0 a 11,0. Os dados obtidos mostram que o ácido fítico encontra-se totalmente deprotonado em pH 12,0 no qual a espécie ML (um ligante para um íon metálico) encontra-se totalmente formada no mesmo valor de pH. Os resultados obtidos por TG e DSC revelaram tanto para o ácido fítico como para o complexo boa estabilidade até a temperatura próxima a 200ºC. Por TG, DTG e DSC conclui-se também que a estequiometria do complexo estudado foi de um mol de ligante para um mol de íon metálico. A Espectrofotometria de Infravermelho comprovou a estabilidade do ácido fítico e a sua interação com o íon Ni(II).

Comportamento do ácido fítico na presença de Fe(II) e Fe(III)

O ácido fítico, dependendo do valor de pH, apresenta alto potencial quelante, complexando íons metálicos, inibindo, assim, a produção de espécies reativas de oxigênio, responsáveis pela destruição oxidativa em sistemas biológicos. Esse potencial quelante tem fundamentado diversos estudos aplicados à ação antioxidante em produtos alimentícios. O objetivo deste trabalho foi estudar o grau de interação do ácido fítico com os íons metálicos Fe(II) e Fe(III), de importância biológica, em condições próximas às fisiológicas, e a estabilidade destes complexos. Titulações potenciométricas foram conduzidas para determinar as constantes de formação dos complexos ácido fítico-Fe(II) e ácido fítico-Fe(III) em solução aquosa, atmosfera inerte, força iônica 0,100 mol.L-1 de cloreto de potássio e à temperatura de 36 ± 0,1 ºC. Estudos espectroscópicos na região do UV-Vis foram realizados para acompanhar a formação dos complexos em solução. Os complexos ácido fítico-Fe(II) e ácido fítico-Fe(III) foram sintetizados e caracterizados por espectroscopia de absorção na região do infravermelho e por estudos termoanalíticos. Os resultados do conjunto de técnicas utilizadas evidenciaram, tanto em solução como no estado sólido, a presença dos íons metálicos coordenados ao ácido fítico.

Extração e determinação do íon amônio do solo

Este trabalho descreve a determinação do íon amônio em solos, pelo método colorimétrico baseado no reativo de Nessler. Foram estudados diversos aspectos, como o espectro de absorção do composto colorido e do reativo de Nessler, a influência do tempo de repouso e da temperatura sobre o desenvolvimento da côr e a interferência de alguns íons que normalmente se encontram nos extratos de solos. A determinação do íon amônio foi conduzida em extratos de solos obtidos com solução de KC1 1 N e destilados, para evitar a interferência do íon manganês-II, que forma um precipitado com o reativo de Nessler. Os resultados obtidos pelo método colorimétrico foram comparados com os determinados pelo método titrimétrico.

Fate of nickel ion in (II-III) hydroxysulphate green rust synthesized by precipitation and coprecipitation

In order to investigate the efficiency of sulfate green rust (GR2) to remove Ni from solution, GR2 samples were synthesized under controlled laboratory conditions. Some GR2 samples were synthesized from Fe(II) and Fe(III) sulfate salts by precipitation. Other samples were prepared by coprecipitation, of Ni(II), Fe(II) and Fe(III) sulfate salts, i.e., in the presence of Ni. In another sample, Ni(II) sulfate salt was added to pre-formed GR2. After an initial X-ray diffraction (XRD) characterization all samples were exposed to ambient air in order to understand the role of Ni in the transformation of the GR2 samples. XRD was repeated after 45 days. The results showed that Nious GR2 prepared by coprecipitation is isomorphous to Ni-free GR2, i.e. Ni is incorporated into the crystalline structure. Fe(II) was not replaced by Ni(II) in the crystalline structure of GR2 formed prior to exposure to solution-phase Ni. This suggests Ni was adsorbed to the GR2 surface. Sulfate green rust is more efficient in removing Ni from the environment by coprecipitation.

Propriedades texturais e catalíticas de óxidos de ferro contendo cromo e cobre

Chromium and copper-doped hematites were prepared with the aim of studying the synergistic effect of these dopants on the textural and on the catalytic properties of the iron oxides towards the high temperature shift reaction. It was found that the most active catalysts were those with the highest amount of copper. They had the Fe(II)/Fe(III) ratio near the stoichiometric value of magnetite, the highest surface areas under the reactional atmosphere and the greatest tendency to produce the active form; they also were poorly crystalline solids. The best performance was shown by the catalyst with Fe/Cu=10, heated at 300ºC. It can thus be concluded that copper acts both as textural and structural promoter in these catalysts.

Preconcentration, determination and speciation of iron by solid-phase extraction using dimethyl (E)-2-[(Z)-1-acetyl)-2-hydroxy-1-propenyl]-2-butenedioate

A new sensitive and selective procedure for speciation of trace dissolved Fe(III) and Fe(II), using modified octadecyl silica membrane disks and determination by flame atomic absorption spectrometry was developed. A ML3 complex is formed between the ligand and Fe(III) responsible for extraction of metal ion on the disk. Various factors influencing the separation of iron were investigated and the optimized operation conditions were established. Under optimum conditions, an enrichment factor of 166 was obtained for Fe3+ ions. The calibration graph using the preconcentration system for Fe3+ was linear between 40.0 and 1000.0 μg L-1.

Experimento didático de quimiometria para planejamento de experimentos: avaliação das condições experimentais na determinação espectrofotométrica de ferro II com o-fenantrolina. Um tutorial, parte III

The objective of this manuscript is to describe a practical experiment that can be employed for teaching concepts related to design of experiments using Matlab or Octave computing environment to beginners, undergraduate and graduate students. The classical experiment for determination of Fe (II) using o-phenanthroline was selected because it is easy to understand, and all the required materials are readily available in most analytical laboratories. The approach used in this tutorial is divided in two steps: first, the students are introduced to the concept of multivariate effects, how to calculate and interpret them, and the construction and evaluation of a linear model to describe the experimental domain by using a 2³ factorial design. Second, an extension of the factorial design by adding axial points is described, thereby, providing a central composite design. The quadratic model is then introduced and used to build the response surface.

Síntese e caracterização de um novo complexo bimetálico de Pd(II) contendo o antibiótico oxitetraciclina

Este artigo descreve a síntese e caracterização de um novo complexo binuclear de paládio (II) contendo o antibiótico oxitetraciclina. O complexo foi caracterizado pelas técnicas usuais de análise. Pela análise do espectro de infravermelho sugerimos que o íon paládio(II) coordena-se no anel A, mais especificamente nos oxigênios da amida e da hidroxila vizinha no anel A e aos oxigênios da carbonila em C11 e da hidroxila em C12.

Thermal behaviour of succinic acid, sodium succinate and its compounds with some bivalent transitions metal ions in dynamic N2 and CO2 atmospheres

Thermal stability and thermal decomposition of succinic acid, sodium succinate and its compounds with Mn(II), Fe(II), Co(II), Ni(II), Cu(II) and Zn(II) were investigated employing simultaneous thermogravimetry and differential thermal analysis (TG-DTA) in nitrogen and carbon dioxide atmospheres and TG-FTIR in nitrogen atmosphere. On heating, in both atmospheres the succinic acid melt and evaporate, while for the sodium succinate the thermal decomposition occurs with the formation of sodium carbonate. For the transition metal succinates the final residue up to 1180 ºC in N2 atmosphere was a mixture of metal and metal oxide in no simple stoichiometric relation, except for Zn compound, where the residue was a small quantity of carbonaceous residue. For the CO2 atmosphere the final residue up to 980 ºC was: MnO, Fe3O4, CoO, ZnO and mixtures of Ni, NiO and Cu, Cu2O.

Inhibition of lipid peroxidation and iron (II)-dependent DNA damage by extracts of Pothomorphe peltata (L.) Miq

Leaves of Pothomorphe peltata (L.) Miq. (Piperaceae) are used locally as anti-inflammatory, antipyretic, hepatoprotective and diuretic infusions and to treat external ulcers and local infections in several parts of the Peruvian, Bolivian and Brazilian Amazon region. The antioxidant activity of different extracts of P. peltata was studied using the hydroperoxide-initiated chemiluminescence assay in liver homogenates, and the methanolic extract was found to have the highest antioxidant activity, with an IC50 = 4 µg/ml. Aqueous and dichloromethane extracts did not show antioxidant activity. The extracts were further evaluated using the thiobarbituric acid-reactive substances (TBARS) assay. Finally, an assay of DNA sugar damage induced by Fe (II) salt was used to determine the capacity of the extracts to suppress the oxidative degradation of DNA. All the extracts showed antioxidant activity in the latter two bioassays. The methanolic extract showed the highest activity in reducing oxidative damage to DNA, with an IC50 = 5 µg/ml. Since this extract was highly effective in reducing chemiluminescence and DNA damage, and because the latter activity could be due to the presence of compounds that bind to DNA, DNA-binding activity was studied using the DNA-methyl green (DNA-MG) bioassay. A 30% decrease in the initial absorbance of DNA-MG complex was observed in the methanolic extract at 1000 µg/ml, suggesting the presence of compounds that bind to genetic material. No DNA-binding activity was observed in the aqueous or dichloromethane extracts