SELEÇÃO RECORRENTE INTRAPOPULACIONAL EM MARACUJAZEIRO-AZEDO VIA MODELOS MISTOS

RESUMO O maracujazeiro pertence ao gênero Passiflora, considerado o de maior importância econômica da família Passifloraceae. O objetivo do trabalho foi estimar para o maracujazeiro-azedo parâmetros e valores genotípicos pelo procedimento REML/BLUP em nível de progênie. Foram avaliadas 27 progênies de meios-irmãos oriundas do segundo ciclo de seleção recorrente conduzido na UENF, selecionadas via índice de seleção. As características avaliadas foram: número de frutos por parcela (NF); massa total de frutos por parcela (MTF) e massa média de frutos (MMF). Os valores genéticos foram estimados por meio do Software SELEGEN, utilizando o procedimento REML/BLUP. Nas estimativas dos parâmetros genéticos via REML, as duas características ligadas diretamente à produção e, portanto, consideradas as mais importantes, NF e MTF apresentaram estimativas de herdabilidade média de progênies de 0,395 e 0,439, respectivamente. Na seleção e nas estimativas dos ganhos via BLUP, o coeficiente de coincidência revelou concordância do resultado da seleção entre as progênies, mostrando que para as três características avaliadas, as mesmas 8 progênies são superiores para as três características simultaneamente. A metodologia REML/BLUP mostrou-se adequada para a avaliação, possibilitando obter estimativas dos parâmetros genéticos e fenotípicos que revelaram a possibilidade de sucesso com a seleção de progênies superiores, com ganhos simultaneamente de 18,02%, 23,08% e 9,65% para NF, MTF e MMF, respectivamente.

Estudo comparativo de dosimetria computacional entre modelos homogêneos e um modelo voxel em mamografia: uma discussão de aplicações em testes de constância e cálculo de dose glandular em pacientes

OBJETIVO: Comparar dados de dosimetria e fluência de fótons entre diferentes modelos de mama, discutindo as aplicações em testes de constância e estudos dosimétricos aplicados à mamografia. MATERIAIS E MÉTODOS: Foram simulados diferentes modelos homogêneos e um modelo antropomórfico de mama tipo voxel, sendo contabilizadas: a dose total absorvida no modelo, a dose absorvida pelo tecido glandular/material equivalente, e a dose absorvida e a fluência de fótons em diferentes profundidades dos modelos. Uma câmara de ionização simulada coletou o kerma de entrada na pele. As combinações alvo-filtro estudadas foram Mo-30Mo e Mo-25Rh, para diferentes potenciais aceleradores de 26 kVp até 34 kVp. RESULTADOS: A dose glandular normalizada, comparada ao modelo voxel, resultou em diferenças entre -15% até -21% para RMI, -10% para PhantomMama e 10% para os modelos Barts e Keithley. A variação dos valores da camada semirredutora entre modelos foi geralmente inferior a 10% para todos os volumes sensíveis. CONCLUSÃO: Para avaliar a dose glandular normalizada e a dose glandular, em mamas médias, recomenda-se o modelo de Dance. Os modelos homogêneos devem ser utilizados para realizar testes de constância em dosimetria, mas eles não são indicados para estimar a dosimetria em pacientes reais

Reações intramoleculares como modelos não miméticos de catálise enzimática

This review gives a critical idea on the importance of intramolecular reactions as models for enzymatic catalysis. Intramolecular lactonizations, ester and amide hydrolysis studies result in theories which try to explain the difference between intermolecular, intramolecular and enzyme reactions and rationalize the enhancement promoted by these biological catalyst.

Modelos para o carbono sp³: quatro pirâmides no tetraedro

We describe a paper model for the sp³ carbon atom, consisting of four pyramids that can be assembled to produce a tetrahedron. The main feature of this model is that, when two of the pyramids are properly put together, the solid thus formed is an "open" tetrahedron, containing edges connecting the center of the tetrahedron to its vertices. The student can easily imagine the whole tetrahedron and, at the same time, he can observe its center and the lines corresponding to the directions of sp³ orbitals.

Transporte de massa em polímeros intrinsecamente condutores: importância, técnicas e modelos teóricos

In this work we discuss the aspects related to the phenomenon of mass transport in thin electroactive polymer films. Such phenomenon must be considered because the properties and consequent applications of these materials largely depend on the movement of charge carriers, i.e. ions, electrons or holes. The most recent majority of the techniques, methods and theoretical models used in this type of study are gathered and discussed, providing an easy and critical way for choosing the methodology for an investigation.

Construção de modelos para ilustração de estruturas moleculares em aulas de química

This paper describes the construction of a kit of molecular model for illustration of molecular structure in chemical class using cheap materials. The atoms were represented by plastic spheres and the bonds between the atoms were made from plastic straws which were cut in the required length using a scale of 1.6 cm corresponding to 100 pm. Examples of adaptations made in this kit for didactical application are given.

Utilização de modelos físico-químicos de adsorção no estudo do comportamento do cobre em solos argilosos

It was evaluated the applicability of Langmuir, Freundlich and Temkin models to copper adsorption in three classes of soils. Fractions of each soil were added to test tubes containing growing concentrations of the metal in solution. The tubes were shaken and the copper concentrations were determined in the extracts by atomic absorption spectrometry (AAS). The models offered a good fit for the experimental data indicating that presence of silicated clay had high influence on copper sorption. The Langmuir isotherm showed high influence of the organic matter in the absorption phenomenon. It was evidenced the importance of further studies related to Temkin model.

Análise conformacional de modelos de lignina

The conformational equilibrium for two 5,5' biphenyl lignin models have been analyzed using a quantum mechanical semiempirical method. The gas phase and solution structures are discussed based on the NMR and X-ray experimental data. The results obtained showed that the observed conformations are solvent-dependent, being the geometries and the thermodynamic properties correlated with the experimental information. This study shows how a systematic theoretical conformational analysis can help to understand chemical processes at a molecular level.

Proposição, validação e análise dos modelos que correlacionam estrutura química e atividade biológica

The present paper aims to bring under discussion some theoretical and practical aspects about the proposition, validation and analysis of QSAR models based on multiple linear regression. A comprehensive approach for the derivation of extrathermodynamic equations is reviewed. Some examples of QSAR models published in the literature are analyzed and criticized.

Aplicação de alguns modelos quimiométricos à espectroscopia de fluorescência de raios-X de energia dispersiva

The objective of this work was to accomplish the simultaneous determination of some chemical elements by Energy Dispersive X-ray Fluorescence (EDXRF) Spectroscopy through multivariate calibration in several sample types. The multivariate calibration models were: Back Propagation neural network, Levemberg-Marquardt neural network and Radial Basis Function neural network, fuzzy modeling and Partial Least Squares Regression. The samples were soil standards, plant standards, and mixtures of lead and sulfur salts diluted in silica. The smallest Root Mean Square errors (RMS) were obtained with Back Propagation neural networks, which solved main EDXRF problems in a better way.

O uso de pseudopotenciais e modelos HF/MP2/DFT na previsão de freqüências vibracionais em complexos metálicos

Four different pseudopotentials and three methodologies were employed in the calculation of the geometry and the frequencies of metal complexes like [M(NH3)2X2] [X=halogen, M=Zn, Cd], and [Hg(NH3)2]Cl2. The vibrational assignments were carefully checked and compared to the theoretically calculated ones. Graphical procedures were employed to estimate family errors and their average behavior. The calculated results show the SBK-X basis set with the best results for the geometries and calculated frequencies, for individual species and statistical results. Its use is recommend, mainly if the neighborhood atoms are described with similar pseudopotentials. Excellent results were also obtained with the Hay and Wadt pseudopotential.

Estudo de aerossóis atmosféricos e aplicação de modelos numéricos

The main purpose of the present work is to study the concentration of atmospheric particles (PM10 and PM2.5) in the Candiota (RS) region using HV PM10 and dichotomous samplers. Four sampling sites at a distance of 50 km from the emission source were selected: Aceguá, Aeroporto, 8 de Agosto and Pedras Altas. Samples were collected from December 2000 to December 2001. The values obtained with the ISCST (Industrial Source Complex Term) model and with the samplers were compared on January 21st, April 5th, July 14th, August 1st, and October 13th 2001, and are representative of frontal systems occurring in the study area.

Validação de modelos de calibração multivariada: uma aplicação na determinação de pureza polimórfica de carbamazepina por espectroscopia no infravermelho próximo

The application of analytical procedures based on multivariate calibration models has been limited in several areas due to requirements of validation and certification of the model. Procedures for validation are presented based on the determination of figures of merit, such as precision (mean, repeatability, intermediate), accuracy, sensitivity, analytical sensitivity, selectivity, signal-to-noise ratio and confidence intervals for PLS models. An example is discussed of a model for polymorphic purity control of carbamazepine by NIR diffuse reflectance spectroscopy. The results show that multivariate calibration models can be validated to fulfill the requirements imposed by industry and standardization agencies.

Propriedades eletrônicas e estruturais do PbTiO3: teoria do funcional de densidade aplicada a modelos periódicos

Calculations based on density functional theory at the B3LYP hybrid functional level applied to periodic models have been performed to characterize the structural and electronic properties of PbTiO3. Two different slab terminations (PbO and TiO2) have been considered to obtain and discuss the results of band structure, density of states, charge distribution on bulk and surface relaxation. It is observed that the relaxation processes are most prominent for the Ti and Pb surface atoms. The electron density maps confirm the partial covalent character of the Ti-O bonds. The calculated optical band gap and other results are in agreement with experimental data.

Modelos para dispersão Raman em polímeros conjugados

Raman dispersion refers to the dependence of the position of Raman bands on the energy of the exciting radiation. In this work, the three main models currently used to explain this phenomenon (Conjugated Length Model, Amplitude Mode Model and Effective Conjugation Coordinate Model) are discussed. Raman dispersion is a consequence of pi electron delocalization, but each model describes in a different way how pi electron delocalization affects the position of Raman bands. Here the features, qualities and problems of the three models are highlighted.