Application Volumes and Sizes of Droplets for the Application of Diquat Herbicide in the Control of Eichhornia crassipes

The objective of this study was to evaluate the efficiency of application and the efficacy of control of water hyacinth (Eichhornia crassipes) with the use of the diquat herbicide done with two application volumes associated to three droplets classes. Three experiments were conducted; in the first, the application efficiency was evaluated; in the second, the control efficiency and; in the third, the droplet spectrum. They were conducted in a completely randomized design with five, four and six replicates, respectively. The treatments were arranged in a 2 x 3 factorial design, with two application volumes (100 and 200 L ha-1) and three droplets classes (fine, extremely coarse and ultra-coarse) to the first and second experiment and the third comprised two diquat concentrations in spray solution (2 and 4 g i.a. L-1) and three droplets classes (fine, extremely coarse and ultra-coarse). The application efficiency was determined by the coverage by droplets, spray deposition and active ingredient of the herbicide (diquat). The efficacy was measured by the control and the percentage of plants with regrowth at 50 days after application. The spectrum of droplets produced per each nozzle model used to obtain the droplets classes were analyzed. According to the parameters analyzed, using the droplets classes extremely thick and ultra thick can provide greater certainty in the application of diquat in the aquatic environment associated with the deposition of the active and sufficient coverage to control Eichhornia crassipes with both application volumes

Inter-annual variations in the floristic and population structure of an herbaceous community of "caatinga" vegetation in Pernambuco, Brazil

The influence of climatic variations on the herbaceous component of the "caatinga" vegetation was examined in the state of Pernambuco, Brazil. A total of 105 1 × 1 m-plots were established, of which 35 were in a level micro-habitat, 35 in a riparian micro-habitat, and 35 in a stony microhabitat. During two consecutive years all herbaceous plants in these plots were counted, measured (height and diameter), and collected for identification. The Shannon-Wiener diversity index and the equitability were calculated for each year, as well as the density, frequency, dominance, total basal area and importance index for each species. The total annual pluviometric was 819.5 and 448.8 mm in 2002 and 2003, respectively. The herbaceous flora in the study area was composed of 71 species, of which 58 were sampled in the plots. The families with the greatest species richness were Malvaceae (8 species), Euphorbiaceae (7), Poaceae (6), Convolvulaceae (4), Fabaceae (4), and Portulacaceae (4). The diversity indices were 2.66 and 3.01 nats ind-1 in 2002 and 2003, respectively. The density, frequency, dominance and importance value of herbaceous populations, as well as, the height and diameter of plants were low in the dryer year. The riparian group was the most isolated of the microhabitats examined, both in terms of its floristic and its population structure. Annual seasonal climatic variations greatly modified these populations structure during the course of this study, emphasizing the fact that long-term studies are needed in order to better understand the dynamics of the herbaceous component of the "caatinga" vegetation.

Detection of anthraquinones and identification of 1,4-naphthohydroquinone in cell suspension cultures of Rudgea jasminoides (Cham.) Müll. Arg. (Rubiaceae)

In Rubiaceae, anthraquinones and naphthoquinones are secondary metabolites characteristic of the subfamily Rubioideae, in which Rudgea jasminoides is included. Thin-layer chromatography using specific solvent systems and spray reagents indicated the presence of anthraquinones constitutively produced by cell suspension cultures of R. jasminoides. GC/MS analysis detected 1,4-naphthohydroquinone as a product of biosynthesis only after elicitation of the cells with yeast extract (Saccharomyces cerevisiae). The latter compound is probably a phytoalexin produced by suspension cultures of R. jasminoides.

A simple RT-PCR-based strategy for screening connexin identity

Vertebrate gap junctions are aggregates of transmembrane channels which are composed of connexin (Cx) proteins encoded by at least fourteen distinct genes in mammals. Since the same Cx type can be expressed in different tissues and more than one Cx type can be expressed by the same cell, the thorough identification of which connexin is in which cell type and how connexin expression changes after experimental manipulation has become quite laborious. Here we describe an efficient, rapid and simple method by which connexin type(s) can be identified in mammalian tissue and cultured cells using endonuclease cleavage of RT-PCR products generated from "multi primers" (sense primer, degenerate oligonucleotide corresponding to a region of the first extracellular domain; antisense primer, degenerate oligonucleotide complementary to the second extracellular domain) that amplify the cytoplasmic loop regions of all known connexins except Cx36. In addition, we provide sequence information on RT-PCR primers used in our laboratory to screen individual connexins and predictions of extension of the "multi primer" method to several human connexins.

Gap junctions in the cardiovascular and immune systems

Gap junctions are clusters of intercellular channels directly connecting the cytoplasm of adjacent cells. These channels are formed by proteins named connexins and are present in all metazoan organisms where they serve diverse functions ranging from control of cell growth and differentiation to electric conduction in excitable tissues. In this overview we describe the presence of connexins in the cardiovascular and lympho-hematopoietic systems giving the reader a summary of the topics to be covered throughout this edition and a historical perspective of the discovery of gap junctions in the immune system.

Cardiac gene expression and systemic cytokine profile are complementary in a murine model of post-ischemic heart failure

After myocardial infarction (MI), activation of the immune system and inflammatory mechanisms, among others, can lead to ventricular remodeling and heart failure (HF). The interaction between these systemic alterations and corresponding changes in the heart has not been extensively examined in the setting of chronic ischemia. The main purpose of this study was to investigate alterations in cardiac gene and systemic cytokine profile in mice with post-ischemic HF. Plasma was tested for IgM and IgG anti-heart reactive repertoire and inflammatory cytokines. Heart samples were assayed for gene expression by analyzing hybridization to AECOM 32k mouse microarrays. Ischemic HF significantly increased the levels of total serum IgM (by 5.2-fold) and total IgG (by 3.6-fold) associated with a relatively high content of anti-heart specificity. A comparable increase was observed in the levels of circulating pro-inflammatory cytokines such as IL-1β (3.8X) and TNF-α (6.0X). IFN-γ was also increased by 3.1-fold in the MI group. However, IL-4 and IL-10 were not significantly different between the MI and sham-operated groups. Chemokines such as MCP-1 and IL-8 were 1.4- and 13-fold increased, respectively, in the plasma of infarcted mice. We identified 2079 well annotated unigenes that were significantly regulated by post-ischemic HF. Complement activation and immune response were among the most up-regulated processes. Interestingly, 21 of the 101 quantified unigenes involved in the inflammatory response were significantly up-regulated and none were down-regulated. These data indicate that post-ischemic heart remodeling is accompanied by immune-mediated mechanisms that act both systemically and locally.

Aplicação de modelos matemáticos bi e tri-paramétricos na predição de isotermas de adsorção de umidade do guaraná (Paullinia cupana) em pó

Doze modelos matemáticos (seis bi-paramétricos e seis tri-paramétricos), amplamente utilizados na predição de isotermas, foram estudados, com o objetivo de predizer isotermas de adsorção de umidade do guaraná (Paullinia cupana) em pó, obtido em "sprey dryer". As isotermas de adsorção de umidade do produto à 15° C, 25° C e 35° C, foram ajustadas por análise de regressão não-linear, usando o aplicativo STATGRAPHICS 5.1. Entre os modelos testados os que apresentaram melhores resultados nos ajustes foram as equações tri-paramétricas de GAB, BET modificada e Anderson, e as equações bi-paramétricas de Handerson e Oswin.

Avaliação da vida de prateleira do suco de maracujá (Passiflora edullis f. flavicarpa) desidratado

Suco de maracujá desidratado por spray-drying, natural e adicionado de açúcar, foi embalado em embalagens laminadas e armazenado em ambientes de 30 e 40 °C e 84% de umidade relativa. Os sucos embalados tiveram sua vida útil avaliada por determinações físicas e microbiológicas. A adição de açúcar aumentou a solubilidade, a molhabilidade, o tamanho da partícula e os valores de L* luminosidade do produto, e diminuiu os parâmetros de cor a* (intensidade da cor vermelha) e b* (intensidade da cor amarela) do produto. Durante o armazenamento, os produtos se mantiveram microbiologicamente estáveis, mas fisicamente foram alterados em relação aos parâmetros de cor e tamanho da partícula, tornando-se escuros e aglomerados, notadamente aqueles adicionados de açúcar e expostos a 40 °C, não sendo recomendada esta adição. Do ponto de vista físico, o período seguro para armazenamento de suco de maracujá natural desidratado foi de 120 dias a 30 °C e 60 dias a 40 °C.

Composição e propriedades físico-químicas de duas frações do soro de sangue bovino

O sangue animal de abatedouros representa uma fonte importante de ingrediente alimentício subutilizado. A produção de sangue bovino no Brasil foi aproximadamente 3,6 x 10(6) tons em 2005. Além do desperdício de uma proteína de boa qualidade, a subutilização deste subproduto da indústria animal é uma fonte importante de poluição dos recursos hídricos e do solo. A concentração de proteína albumina (BSA) e globulina (BSG) bovinas secas em spray ou liofilizadas foi, aproximadamente, 85,0%. O score de aminoácidos (EAAS) foi 72,7%, para BSA liofilizada, e 89,3%, para BSG. As propriedades emulsificantes e espumantes de ambas as frações protéicas foram altas, principalmente a pH 5,5. A capacidade emulsificante e espumante foi maior para BSA, no entanto, tanto a estabilidade da emulsão quanto a da espuma formada foram melhores para a BSG. A adição de NaCl apresentou uma tendência de reduzir as duas propriedades surfactantes, independentemente do pH. Considerando a solubilidade, a estabilidade ao calor, propriedades emulsificante e espumante, tanto a BSA quanto a BSG deveriam ser consideradas bons ingredientes funcionais para a manufatura de produtos alimentícios. O estudo não apenas confirmou dados já reportados na literatura, como também explorou novas propriedades, o que amplifica o potencial de aplicações do soro de sangue bovino.

Drying of sicilian lemon residue: influence of process variables on the evaluation of the dietary fiber produced

In this study, the effect of the process variables of the air-drying of Sicilian lemon residues on some technological properties of the fibers produced was studied. The determination and modeling of desorption isotherms were used to establish the equilibrium moisture content at 60, 75, and 90 °C using the static method with 8 saturated salt solutions. The best fit was obtained with BET and GAB models. The drying process was conducted in a vertical tray dryer and delineated according to a central composite experimental design (2²) using the following as factors: air velocity (0.5, 0.75 and 1 m/s) and temperature (60, 75, and 90 °C), and it presented a good fit to the exponential model (R² > 99.9%). The experimental design responses evaluated were the technological properties of the fibers: water-holding, oil-holding, and swelling capacity. Since these properties were present in high levels, the lemon residues could be used to increase content of fibers in foods resulting in the addition of nutritional benefits for the consumers.

Microparticles obtained by complex coacervation: influence of the type of reticulation and the drying process on the release of the core material

Microparticles obtained by complex coacervation were crosslinked with glutaraldehyde or with transglutaminase and dried using freeze drying or spray drying. Moist samples presented Encapsulation Efficiency (%EE) higher than 96%. The mean diameters ranged from 43.7 ± 3.4 to 96.4 ± 10.3 µm for moist samples, from 38.1 ± 5.36 to 65.2 ± 16.1 µm for dried samples, and from 62.5 ± 7.5 to 106.9 ± 26.1 µm for rehydrated microparticles. The integrity of the particles without crosslinking was maintained when freeze drying was used. After spray drying, only crosslinked samples were able to maintain the wall integrity. Microparticles had a round shape and in the case of dried samples rugged walls apparently without cracks were observed. Core distribution inside the particles was multinuclear and homogeneous and core release was evaluated using anhydrous ethanol. Moist particles crosslinked with glutaraldehyde at the concentration of 1.0 mM.g-1 protein (ptn), were more efficient with respect to the core retention compared to 0.1 mM.g-1 ptn or those crosslinked with transglutaminase (10 U.g-1 ptn). The drying processes had a strong influence on the core release profile reducing the amount released to all dry samples

Evaluation of the quality of a molded sweet biscuit enriched with okara flour

The objective of this research was to test the addition of soymilk residue, also known as okara, to a molded sweet biscuit (MSB). The okara was provided by two soymilk producing companies whose production systems are based on hot disintegration of decorticated (company B) or non-decorticated (company A) soybeans and separation of the soymilk. Okaras A and B were dehydrated in a flash dryer and then ground to a flour (< 200 mesh). The okara flours showed high protein (35 g.100 g-1 dwb), lipid (17 g.100 g-1 dwb), and fiber (17 to 21 g.100 g-1 dwb) contents. The water holding capacity, protein solubility, emulsifying capacity, emulsion stability and isoflavone contents found in flour A were significantly higher (p < 0.05) than in flour B. The formulation of MSB, replacing 30% (w/w) of the wheat flour with okara flour was tested. The results of the physical measurements, brittleness and water activity of the MSB with flours A and B did not differ significantly (p < 0.05) from those of the standard. The color, flavor and overall quality of the MSB with 30% of okara flour B did not differ significantly from those of the standard biscuit, demonstrating its potential for application in confectionery products.

Study of the flash drying of the residue from soymilk processing - "okara"

The objective of this research project was to study the drying of soymilk residue in a pneumatic flash dryer, using response Surface Methodology (RSM), and to evaluate the quality of the dried residue. Soymilk residue, also known as okara, was provided by a Brazilian soymilk factory. RSM showed that for a 120 second drying cycle, the lower the residue moisture contents (y) obtained, the higher the recirculation rates (x1), regardless of the air drying temperature (x2), and it could be expressed by the equation y = 7.072 - 7.92x1, with R² = 92,92%. It is possible to obtain okara with 10% of moisture (dwb) under the condition x1=1.25, equivalent to RR = 61%, with air drying temperatures ranging from 252 °C to 308 °C. The dried okara obtained through Central Compound Rotational Design (CCRD) presented a centesimal composition similar to the okara dried in a tray dryer, known as the original okara. There were significant variations (p < 0.05) in the Emulsifying Capacity (EC), Emulsion Stability (ES) and Protein Solubility (PS) between the dehydrated residues obtained. It was concluded that the flash drying of okara is technically feasible and that the physicochemical composition of the residue was not altered; on the contrary, the process promoted a positive effect on the technological functional properties.

Mathematical modeling of dehydration of 'Fuji' and 'Gala' apples slices using infrared

The objective of this work was to determine and model the infrared dehydration curves of apple slices - Fuji and Gala varieties. The slices were dehydrated until constant mass, in a prototype dryer with infrared heating source. The applied temperatures ranged from 50 to 100 °C. Due to the physical characteristics of the product, the dehydration curve was divided in two periods, constant and falling, separated by the critical moisture content. A linear model was used to describe the constant dehydration period. Empirical models traditionally used to model the drying behavior of agricultural products were fitted to the experimental data of the falling dehydration period. Critical moisture contents of 2.811 and 3.103 kgw kgs-1 were observed for the Fuji and Gala varieties, respectively. Based on the results, it was concluded that the constant dehydration rates presented a direct relationship with the temperature; thus, it was possible to fit a model that describes the moisture content variation in function of time and temperature. Among the tested models, which describe the falling dehydration period, the model proposed by Midilli presented the best fit for all studied conditions.

Retention of short chain fatty acids under drying and storage conditions

Cheese whey permeate was used as a substrate for the fermentation of Propionibacterium freudenreichi PS1 for the production of short chain fatty acids, components of the bio-aroma of Swiss cheese. The liquid bio-aroma was encapsulated by spray drying under different conditions of air inlet temperature and feed rate. A study was carried out on the stability of the bio-aroma during storage in laminated packages at 30 °C for 96 days using the product showing the greatest retention of acetic and propionic acids. The results showed that the best drying conditions were an air entrance temperature of 180 °C and a feed rate of 24 g/min resulting in particles with a smooth surface and few invaginations and micro-fissures. However, 72% of the acetic acid and 80% of the propionic acid were lost during storage showing that the wall material used was inadequate to guarantee product stability.