139 resultados para gerenciamento do lado da demanda
Resumo:
OBJETIVO: O objetivo deste estudo foi identificar a situação do gerenciamento de efluentes radiográficos em serviços de diagnóstico por imagem, em relação ao manuseio, acondicionamento, armazenamento, tratamento e descarte desses efluentes. MATERIAIS E MÉTODOS: Tratou-se de estudo descritivo e exploratório, realizado por meio de entrevistas baseadas em roteiro com perguntas semiestruturadas, realizadas no período de fevereiro a maio de 2009. A investigação foi realizada em 12 serviços de saúde humana e animal de radiodiagnóstico de Ribeirão Preto, SP, Brasil, escolhidos aleatoriamente por sorteio por meio do programa Statistical Package for the Social Sciences, versão 10.0. RESULTADOS: De acordo com os entrevistados, 16,66% dos serviços descartavam revelador usado na rede pública de esgoto, sem tratamento prévio, 8,33% descartavam o fixador e 75% descartavam a água de lavagem de filmes diretamente no esgoto, sem tratamento prévio. CONCLUSÃO: Os resultados deste estudo evidenciam necessidade de maior fiscalização, controle e monitoramento, pela vigilância ambiental e sanitária, para com os efluentes radiográficos, estimulando tratamento antes do descarte, minimizando o impacto à saúde pública e ao ambiente.
Resumo:
The generation of chemical residues in both teaching and research laboratories is a serious problem in Brazil. In this article, a Chemical Residues Management Program is presented and discussed. The Program is centered in different hierarchic positions, but driven by minimization. A common ground for discussion and distribution of related information is also proposed as a mean to spread the program throughout Brazilian Universities.
Resumo:
The Laboratory Waste Management Program of the Chemistry Department of UFPR started on 1997 and was developed to meet the requirements of co-processing in cement kiln and those of the respective regulation. The in-lab procedures for waste collection and treatment were devised taking into account their cost, simplicity and wide range of application to the various types of residues generated. The program works with a five step annual journey : 1) Waste collection and treatment, 2) Bulk Storage, 3) Licensing (for transportation and co-processing), 4) Transportation and 5) Co-processing.
Resumo:
A novel and unique in a brazilian university experience for rigorous handling of chemical residues of research and teaching is described. The activities since 1998 of a laboratory for the adequate treatment and recovery of chemicals at the São Carlos Campus of the University of São Paulo are summarized. The necessity of environment conscience future professional is enhanced.
Resumo:
This work shows some laboratory waste management developed in order to recover some elements or to prepare the waste for a correct final disposal. The 25 elements chosen cover basically all chemical behaviors found for the metals in the Periodic Table. The treatments adopted were based on the classical behavior in aqueous solution (wet chemistry) but an important condition for a full success was the previous knowledge of the qualitative composition of the wastes treated. Some general trends were found: the final liquid waste was always saline and normally presented a higher volume than the original waste; most original wastes were acid in nature; steps such as solid-liquid separation, washing, evaporating and calcining were currently performed. This work was also a very good experience in chemistry in solution for students and showed them the need of treating wastes for a better environment.
Resumo:
A system for disposal and recovery of the main effluents and chemical waist from isotope separation plants and enriched compounds-15N and 34S production has been carried out at the Stable Isotope Laboratory (LIE) of the CENA/USP. Around four hundred thousand liters of effluents has been recovered yearly. Among the recovered chemical wastes, the more relevant are: ammonia; brome; ammonium and sodium sulfate; sodium hydroxide; sulfur dioxide; and hydrochloric acid. Chemical wastes containg recoverable heavy metals (Ag, Cr and Cu) and solvents (methanol, ethanol and acetone) are processed and recovered. Gaseous emissions, mainly H2S are used for recovery of heavy metals solutions. The minimization of the residues waters, as well the reduction of electric energy consume was established using a water deionization system. A cost/effect balance of the process is reported.
Resumo:
This work presents a proposal for the management of residues from teaching laboratories. The main goals of the proposal are: scale reduction of experiments, reuse of residues as raw materials for new experiments and appropriate treatment and storage of residues. The methodology includes standardized labels for residue classification and registration of experimental classes and their residues in files. The management seemed to be efficient, resulting in a reduction of the amount of reagents utilized and residues generated, and an increase of reutilization of residues. A considerable decrease of needed storage space and suitable methods for correct residue disposal were achieved. We expect that all laboratories, including those exclusively for research activities, become involved, in a near future, in the Residue Management Project of URI - Campus Erechim.
Resumo:
The aim of this work is to establish a program for the treatment of chemical residues and waste waters at the Centro de Energia Nuclear na Agricultura (CENA/USP), for environmental preservation and training of staff. Five tons of stored residues and the ones currently generated in the laboratories have to be treated. Rational use of water is also part of the program. The traditional purification by distillation has been replaced by purification with ion exchange resins. Lower energy consumption and better water quality were achieved.
Resumo:
In this work, a partial least squares regression routine was used to develop a multivariate calibration model to predict the chemical oxygen demand (COD) in substrates of environmental relevance (paper effluents and landfill leachates) from UV-Vis spectral data. The calibration models permit the fast determination of the COD with typical relative errors lower by 10% with respect to the conventional methodology.
Resumo:
Beginning students in chemistry usually do not realize that wastes generated in their experimental classes constitute an environmental problem and that residues must be treated or disposed of in a suitable way. In this manuscript we describe the work that we have been doing in the inorganic chemistry course of the Federal University of Rio Grande do Sul with the objective of creating a critical consciousness in the students about the chemical wastes they generate. With this policy, students are required to take into account the nature of the residues they generate, how they can treat or segregate them, and how they can keep them in a suitable way for final destination, instead of simply throwing them away.
Resumo:
COD is an important parameter to estimate the concentration of organic contaminants. The closed system technique with the use of K2Cr2O7 is the most important one, however, it has the inconvenience to suffer positive chemical interferences from inorganic compounds such as Fe2+ and H2O2 (not enough reported in the literature). This paper considers a statistical-experimental set capable to validate a empirical mathematical model generated from a 23 experimental design, in the presence of Fe2+ and H2O2. The t test shows that mathematical model has 99,99999% confidence degree and the experimental validation test indicates absolute mean error of 4,70%.
Resumo:
Oxigênio dissolvido (OD), demanda bioquímica do oxigênio (DBO) e demanda química do oxigênio (DQO) foram utilizados como parâmetros para se avaliar o grau e capacidade de autodepuração do ribeirão Lavapés, que atravessa a cidade de Botucatu - SP. Avaliou-se o perfil de poluição orgânica e identificadas as zonas de autodepuração, e pontualmente foi realizado uma coleta de 24 horas, de hora em hora, onde foi possível correlacionar a poluição orgânica com as atividades domésticas. A DQO mostrou-se como a melhor técnica para avaliar o perfil de poluição orgânica, identificar as zonas de depuração, e para avaliar a poluição orgânica, neste curso dágua. A relação DQO/DBO foi em média 3,4 caracterizando um esgoto biodegradável, indicando que praticamente não existe adição de efluentes industriais, permitindo assim estimar a DBO através da DQO. Nos trechos de água limpa, nascente e foz, em que a DQO estava abaixo de 5 mg L-1 O2, foram utilizados os valores de oxigênio consumido (método do permanganato), o que não invalidou a identificação das zonas de depuração. No entanto pesquisas para desenvolver o método de DQO (dicromato) para baixas concentrações, abaixo de 5 mg L-1 são necessárias para uma melhor avaliação da recuperação do curso dágua.
Resumo:
Propõe-se metodologia analítica para a determinação da demanda química de oxigênio(DQO) em águas e efluentes pouco poluídos, pela espectrofotometria simultânea dos íons crômio(III) e dicromato, após a clássica oxidação sulfocrômica das amostras, à quente e catalisada por íons Ag+. Demonstra-se que a inter-relação entre as concentrações de DQO, de crômio(III) formado e de dicromato residual permite simplificar a resolução numérica do sistema - de multicomponente, envolvendo as concentrações desses dois íons, e medidas de absorbância em pelo menos dois comprimentos de onda para monocomponente, envolvendo diretamente a concentração em DQO, e medida de absorbância num único comprimento de onda.
Resumo:
This work describes the waste management system developed at the Laboratory of Limnology of Federal University of Rio de Janeiro. The initial challenge was to identify and treat a great variety of wastes generated in the analytical procedures performed in the laboratory. Since many of the students and researchers are not chemists, an intensive training was performed during the establishment of the management system. After three years, there was a deep change of attitude of the professionals involved. The present experience may be useful for other laboratories with a profile similar to the one under study.
Resumo:
Este trabalho teve por objetivos especificar e estimar a demanda brasileira de importação de borracha natural, no período de 1964 a 2005. As variáveis explicativas do modelo de demanda de importação foram: preço de importação da borracha natural, PIB per capita, taxa de câmbio, taxa de juros, quantidade de borracha natural produzida internamente e tendência. As estimativas obtidas utilizando o modelo de ajustamento parcial confirmaram que as variáveis explicativas afetam, significativamente, a demanda brasileira de importação de borracha natural. Os resultados apontaram que a demanda brasileira de importação de borracha natural é inelástica com relação ao preço de importação e à renda; é pouco sensível a variações no preço de importação, à taxa de câmbio, à renda e à taxa de juros, mas é sensível às variações na quantidade de borracha natural produzida internamente, no curto e longo prazos; e a borracha natural é um bem normal.