Description of a pure seed fraction of oat through usual evaluations and radiographic images

The objective of this work was to evaluate the width and length incidence in a single seed fraction of oat [Avena sativa (L.)] cv. Cristal. The seeds were selected by a mechanical divider and by hand, and their correspondence to radiographic images in seeds with glumes and their caryopses. The width and length of the seeds with glumes and their caryopses were measured with electronic calliper, and their weight, with precision balance. Radiographic images of seeds with glumes were taken with an X-ray experimental equipment. The analyst selected seeds with glumes by the width and by the length previously determined and so with more weight, than that obtained by hand selection was slightly narrower, larger and lighter. The presence of the glumes masked the caryopses real dimensions (width and length), and conduced the analyst to select seeds that differed more by the width than by the length. The radiographic images showed the presence, or not, of caryopses inside the seed and its real dimensions. The mechanical partition method for seeds showed to be more efficient because the analyst subjectivity was not considered when the selection upon its dimensions was done. The X-ray analysis was a useful tool that complements the pure seed fraction selection as another factor of seed quality.

Produtos naturais da ascídia Botrylloides giganteum, das esponjas Verongula gigantea, Ircinia felix, Cliona delitrix e do nudibrânquio Tambja eliora, da costa do Brasil

Two new marine metabolites, 3Z, 6Z, 9Z-dodecatrien-1-ol (1) from the ascidian Botrylloides giganteum and 4H-pyran-2ol acetate from the sponge Ircinia felix (4) are herein reported. The known bromotyrosine compounds, 2-(3,5-dibromo-4-methoxyphenyl)-N,N,N-dimethylethanammonium (2) and 2,6-dibromo-4-(2-(trimethylammonium)ethyl)phenol (3), have been isolated from the sponge Verongula gigantea. Serotonin (5) is reported for the first time from the sponge Cliona delitrix, and tambjamines A (15) and D (16) isolated as their respective salts from the nudibranch Tambja eliora. Only tambjamine D presented cytotoxicity against CEM (IC50 12.2 µg/mL) and HL60 (IC50 13.2 µg/mL) human leukemya cells, MCF-7 breast cancer cells (IC50 13.2 µg/mL), colon HCT-8 cancer cells (IC50 10.1 µg/mL) and murine melanoma B16 cancer cells (IC50 6.7 µg/mL).

Bauer-7-en-3beta-yl acetate: a major constituent of unusual samples of Brazilian propolis

The pentacyclic triterpenoid bauer-7-en-3beta-yl acetate was obtained from the chloroform extract of an unusual sample of propolis from southeast Brazil with the yield of 7%. The compound was identified by comparison of IR, MS and NMR analysis with published data.

Estudos químicos e biológicos de Microgramma vacciniifolia (Langsd. & Fisch.) Copel (Polypodiaceae)

Chemical studies with aerial parts of Microgramma vacciniifolia (Langsd. & Fisch.) Copel. afforded ²-sitosterol, hopan-22-ol, 6-metoxiapinenin-7-O-²-D-allopyranoside and a mixture containing ethyl esters of carboxilic acids. The structures of the coumpounds were elucidated by spectroscopy and GC-MS analysis. The total phenolics contents of the crude extract and fractions were determined by Folin-Ciocalteau method. The antioxidant activity was evaluated using the 2,2-diphenyl-1-picrylhydrazyl (DPPH). The AcOEt fraction showed better activity in DPPH assay (9.9 ± 0.03 µg/mL), and presented also higher contents of the total phenolic (93.60 ± 1.11 µg/mg). Antimicrobial and allelopathic effects of the crude etanolic extract and fractions also were evaluated. In addition, the combination of biological activities was discussed.

Feoforbídeo (etoxi-purpurina-18) isolado de Gossypium mustelinum (Malvaceae)

The phaeophorbide ethyl ester named Purpurin-18 and the flavonoids quercetin and kaempferol were obtained by chromatographic procedures from the chloroform fraction of aerial parts of Gossypium mustelinum. The structure of these compound was determined by NMR, IR and mass spectra data analysis. This is the first occurrence of this compound in Angiosperm.

Estimativa da incerteza de medição em análise cromatográfica: abordagem sobre a quantificação de carbamato de etila em cachaça

The measurement uncertainty is useful to estimate the confidence of analytical results. Nowadays, a result without the uncertainty statement cannot be considered reliable, but the scientific literature still lacks examples of the estimate of the measurement uncertainty. This paper presents a practical and reliable description of the measurement uncertainty estimation of the analytical determination of ethyl carbamate in cachaça by GC-IDMS. The isotope dilution technique (ID) associated with GC-MS was used to improve the accuracy. The uncertainty estimated corresponds to 10% of the mass fraction of ethyl carbamate (115 ± 11) ng/g, which is in agreement with ppb level.

Hydrogels of cellulose acetate crosslinked with pyromellitic dianhydride: part I: synthesis and swelling kinetics

This work describes the synthesis of hydrogels of cellulose acetate (AC) crosslinked with 1,2,4,5-benzenotetracarboxylic dianhydride (PMDA). The crosslinking reaction was monitored by FTIR. Analysis of aromatic fragments from the alkaline hydrolysis of the gels by UV spectroscopy indicated that an increase in the stoichiometric ratio of dianhydride resulted in higher degrees of crosslinking. The non-porous nature of the gels was confirmed by analysis of nitrogen adsorption. Water absorption isotherms showed that as the temperature and degree of crosslinking increased, the percentage of water absorbed at equilibrium (%Seq) also increased. The hydrogels presented second order swelling kinetics.

Constituintes químicos de Vernonia scorpioides (Lam) Pers. (Asteraceae)

The chemical investigation of hexane and ethanol extracts from the aerial parts of Vernonia scorpioides resulted in the isolation and characterization of a new polyacetylene lactone, rel-4-dihydro-4β-hydroxy-5a-octa-2,4,6-triynyl-furan-2-(5H)-one, along with the new ethyl 3,4-dihydroxy-6,8,10-triynyl-dodecanoate, and seven known compounds: taraxasteryl acetate, lupeyl acetate, lupeol, lupenone, β-sitosterol, stigmasterol and luteolin. The structure of all compounds was determined by spectrometric techniques (HR-ESI-MS, ¹H and 13C NMR and IV) and comparison with published spectral data.

Brazilian vodkas have undetectable levels of ethyl carbamate

While in Europe vodka is mainly derived from potatoes or cereals, a large proportion of Brazilian vodka is likely obtained from sugarcane, which contains ethyl carbamate (EC) precursors. EC, in addition to several other contaminants and congeners, were investigated in 32 samples of Brazilian vodka. All samples complied with the Brazilian regulations for congeners and contaminants, having EC content below 0.01 mg/L (detection limit). These results are probably related to the processing of vodka, in particular the use of extractive and rectifying stainless steel distillation columns, which allow the production of high strength spirits with low levels of congeners and contaminants.

A NOVEL POLYACRYLAMIDE-BASED HYDROGEL CROSSLINKED WITH CELLULOSE ACETATE AND PREPARED BY PRECIPITATION POLYMERIZATION

The synthesis of polyacrylamide-cellulose acetate hydrogels by precipitation polymerization in acetone solution is reported herein. These hydrogels exhibit smaller swelling ratios and larger compression moduli than homo polyacrylamide hydrogels. For cellulose acetate concentrations above 20 wt.%, hydrogels with N,N'-methylenebisacrylamide as a crosslinker exhibit swelling ratios and compression moduli similar to those of the hydrogels without the crosslinker. A possible explanation for this behavior is that cellulose acetate crosslinks polyacrylamide via free-radical reaction. The hydrogels obtained without the N,N'-methylenebisacrylamide crosslinker exhibit compression moduli up to 1.7 MPa, making them suitable for tissue engineering applications such as cartilage replacement.

PYROLIGNEOUS LIQUOR PRODUCED FROM ACACIA MEARNSII DE WILD WOOD UNDER CONTROLLED CONDITIONS AS A RENEWABLE SOURCE OF CHEMICALS

Acacia mearnsii de Wild (black wattle) is one of the most important trees planted in Southern Brazil for tannin extraction and charcoal production. The pyrolysis of the black wattle wood used for obtaining charcoal is performed in brick ovens, with the gas fraction being sent directly into the environment. The present study examines the condensable compounds present in the liquor produced from black wattle wood at different thermal degradation conditions, using gas chromatography coupled with mass spectrometry (GC/MS). Branches of black wattle were thermally degraded at controlled ambient and temperature conditions. Overall, a higher variety of compounds were obtained under atmospheric air pressure than under synthetic air pressure. Most of the tentatively identified compounds, such as carboxylic acids, phenols, aldehydes, and low molecular mass lignin fragments, such as guayacol, syringol, and eugenol, were products of lignin thermoconversion. Substituted aromatic compounds, such as vanillin, ethyl vanillin, and 2-methoxy-4-propeny-phenol, were also identified. At temperatures above 200 ºC, furan, 2-acetylfuran, methyl-2-furoate, and furfural, amongst others, were identified as polysaccharide derivatives from cellulose and hemicellulose depolymerization. This study evidences the need for adequate management of the condensable by-products of charcoal production, both for economic reasons and for controlling their potential environmental impact.

Using fraction images derived from modis data for coffee crop mapping

Coffee production was closely linked to the economic development of Brazil and, even today, coffee is an important product of the national agriculture. The State of Minas Gerais currently accounts for 52% of the whole coffee area in Brazil. Remote sensing data can provide information for monitoring and mapping of coffee crops, faster and cheaper than conventional methods. In this context, the objective of this study was to assess the effectiveness of coffee crop mapping in Monte Santo de Minas municipality, Minas Gerais State, Brazil, from fraction images derived from MODIS data, in both dry and rainy seasons. The Spectral Linear Mixing Model was used to derive fraction images of soil, coffee, and water/shade. These fraction images served as input data for the supervised automatic classification using the SVM - Support Vector Machine approach. The best results concerning Overall Accuracy and Kappa Index were obtained in the classification of the dry season, with 67% and 0.41, respectively.

Effect of medroxy-progesterone acetate on follicular growth and endometrial cycloxygenase-2 (COX-2) expression during the bovine estrous cycle

The objective of this study was to evaluate the effect of medroxy-progesterone acetate (MAP) with or without estradiol benzoate (EB) on follicular growth during the estrous cycle in cattle. In the first experiment, Hereford cows were synchronized with a synthetic analogue of PGF2 alpha and were treated with two different doses of MAP (250 or 500 mg) with or without EB for 7 days starting on day 8 of the estrous cycle. Follicular growth was inhibited (P<0.05) in all cows except controls and those receiving 250mg MAP without EB. Seventy-five percent of the animals (15/20) showed estrus on days 21 and 22 of the cycle rather than at MAP withdrawal, demonstrating that these treatments did not induce estrus. To determine whether the EB treatment altered endometrial sensitivity to oxytocin and thus the luteolytic cascade, multiparous pre-synchronized cows received 5 mg of EB followed 6 hours later with 50 IU of oxytocin (OT; n=9). Eight hours after EB injection, endometrial fragments were collected from the cows on days 4, 13 and 17 of the estrous cycle and COX-2 gene expression was measured by PCR. EB increased COX-2 mRNA levels only on day 17 of the estrous cycle (P<0.05). In conclusion, MAP alone or associated with EB is able to suppress bovine follicular growth. However, EB in the presence of MAP is not efficient to induce luteolysis in cows when injected on day 8 of the estrous cycle.

Culture of equine bone marrow mononuclear fraction and adipose tissue-derived stromal vascular fraction cells in different media

The objective of this study was to evaluate the culture of equine bone marrow mononuclear fraction and adipose tissue - derived stromal vascular fraction cells in two different cell culture media. Five adult horses were submitted to bone marrow aspiration from the sternum, and then from the adipose tissue of the gluteal region near the base of the tail. Mononuclear fraction and stromal vascular fraction were isolated from the samples and cultivated in DMEM medium supplemented with 10% fetal bovine serum or in AIM-V medium. The cultures were observed once a week with an inverted microscope, to perform a qualitative analysis of the morphology of the cells as well as the general appearance of the cell culture. Colony-forming units (CFU) were counted on days 5, 15 and 25 of cell culture. During the first week of culture, differences were observed between the samples from the same source maintained in different culture media. The number of colonies was significantly higher in samples of bone marrow in relation to samples of adipose tissue.

On-site calibration of a phase fraction meter by an inverse technique

The formal calibration procedure of a phase fraction meter is based on registering the outputs resulting from imposed phase fractions at known flow regimes. This can be straightforwardly done in laboratory conditions, but is rarely the case in industrial conditions, and particularly for on-site applications. Thus, there is a clear need for less restrictive calibration methods regarding to the prior knowledge of the complete set of inlet conditions. A new procedure is proposed in this work for the on-site construction of the calibration curve from total flown mass values of the homogeneous dispersed phase. The solution is obtained by minimizing a convenient error functional, assembled with data from redundant tests to handle the intrinsic ill-conditioned nature of the problem. Numerical simulations performed for increasing error levels demonstrate that acceptable calibration curves can be reconstructed, even from total mass measured within a precision of up to 2%. Consequently, the method can readily be applied, especially in on-site calibration problems in which classical procedures fail due to the impossibility of having a strict control of all the input/output parameters.