Preparação, caracterização e propriedades de filmes poliméricos com potencial aplicação no recobrimento de sementes

Films of sodium carboxymethyl cellulose, sodium alginate and their mixture were evaluated in terms of interactions between the polymers, morphology, water absorption and application as seed coatings. FTIR analysis suggested that only hydrophobic interactions occurred between the polymers. The coating of bean seeds was confirmed by microscopy, indicating the formation of dense and homogeneous films with 7 μm thickness. The obtained films did not affect the germination capacity of the seeds. In summary, the characteristics and properties of the films formed and the water absorption capacity, indicate that these systems are viable for use in seed coating processes.

Removal of phenol and conventional pollutants from aqueous effluent by chitosan and chitin

The present study deals with phenol adsorption on chitin and chitosan and removal of contaminants from wastewater of a petroleum refinery. The adsorption kinetic data were best fitted to first- and second-order models for chitosan and chitin, respectively. The results of adsorption isotherms showed Langmuir model more appropriately described than a Freundlich model for both adsorbents. The adsorption capacity was 1.96 and 1.26 mg/g for chitin and chitosan, respectively. Maximum removal of phenol was about 70-80% (flow rate: 1.5 mL/min, bed height: 18.5 cm, and 30 mg/L of phenol. Wastewater treatment with chitin in a fixed-bed system showed reductions of about 52 and 92% for COD and oil and greases, and for chitosan 65 and 67%, respectively. The results show improvement of the effluent quality after treatment with chitin and chitosan.

Comparação interlaboratorial para análise de dureza total e cloreto em água

Interlaboratorial comparison of the determination of hardness and chloride in water had been performed by 38 and 37 laboratories, respectively. In all cases the participating laboratories used its routine methods. Homogeneity and stability testing were performed on the samples sent to the laboratories. The codified results are graphically reported and compared to assigned value, determined by the consensus of the laboratories. Satisfactory results were obtained for 71 and 73% of the laboratories, considering hardness and chloride determination, respectively.

Constituintes químicos e atividade Leishmanicida de Gustavia elliptica (Lecythidaceae)

The phytochemical investigation of the stem bark and leaves of G. elliptica provided a mixture of the norisoprenoids blumenol B and 6-epiblumenol B along with the triterpenes friedelin, as the major constituent, friedelanol, ursa-9(11),12-dien-3-ol, a-amyrin, β-amyrin, morentenol, epifriedelanol, as well as the sesquiterpenes trans-caryophyllene, α-humulene, ethyl hydnocarpate and other fatty acid esters. The identification of the compounds was performed on basis of spectrometric methods such as GC-MS, IR, MS and 1D and 2D NMR. Stem bark extracts showed significant leishmanicidal activity against promastigote forms of Leishmania braziliensis, with the best results for the chloroform extract.

Otimização das condições de extração de saponinas em Ampelozizyphus amazonicus usando planejamento experimental e metodologia de superfície de resposta

This works describes the use of experimental design and surface response methodology for optimization of saponin extraction from Ampelozizyphus amazonicus. For this purpose, a method employing extraction based on maceration assisted by ultrasound technique was utilized. The following factors were studied: extraction length of time and solvent composition. The total saponin was determined by using a gravimetric method and the results expressed by their relative proportion to total crude extract. For the specific condition, 60% hydro-alcoholic solution and 18 minutes extraction length of time has shown the best results. This method can be useful for extraction of substances with biological importance

In vitro trypanocidal evaluation of pinane derivatives from essential oils of ripe fruits from Schinus terebinthifolius Raddi (Anacardiaceae)

Essential oils of ripe fruits from Schinus terebinthifolius (Anacardiaceae), obtained using a pilot extractor and a Clevenger apparatus were chemically characterized. Due the high amount of (-)- α-pinene in both oils, this monoterpene was tested against the protozoan parasite Trypanosoma cruzi, showing a moderate potential (IC50 63.56 µg/mL) when compared to benznidazole (IC50 43.14 µg/mL). Otherwise, (-)- α-pinene oxide did not showed anti-trypanosomal activity (IC50 > 400 µg/mL) while (-)-pinane showed an IC50 of 56.50 µg/mL. The obtained results indicated that the epoxydation of α-pinene results to the loss of the anti-parasitic activity while its hydrogenation product, contributed slightly to the increased activity.

Rotenoids from Tephrosia toxicaria with larvicidal activity against Aedes aegypti, the main vector of dengue fever

In the search for new larvicides from plants, we have investigated the potential activity of the rotenoids deguelin (1), 12a-hydroxy-α-toxicarol (2) and tephrosin (3), isolated from the bioactive ethanol extract of roots of Tephrosia toxicaria Pers., against Aedes aegypti, the main vector of dengue. The absolute configuration of these compounds was determined by circular dichroism (CD) spectra. The LC50 values of the compounds evaluated justify the potential of T. toxicaria as a new natural larvicide.

Evaluation of antimicrobial activity and toxic potential of extracts and triterpenes isolated from Maytenus imbricata

The phytochemical study of hexane/ethyl ether (1:1) extract of the roots of M. imbricata, Celastraceae, resulted in the isolation and characterization of six known triterpenes: 11α-hydroxylup-20(29)-en-3-one, previously isolated from this species besides, 3β,11α-di-hydroxylup-20(29)-ene, 3,7-dioxofriedelane, 3-oxo-29-hydroxyfriedelane, tingenone and 6-oxo-tingenol. The chemical structures of these triterpenes were established by spectrometric data (IR, ¹H and 13C NMR) and through comparison with literature data. The hexane/ethyl ether (1:1), ethyl acetate and methanol extracts, and 11α-hydroxylup-20(29)-en-3-one, tingenone and 6-oxo-tingenol, showed antimicrobial properties on in vitro assays. All extracts and triterpenes, except 3β,11α-di-hydroxylup-20(29)-ene, presented toxicity demonstrated by the larvicidal effect test using Artemia salina.

EFEITO DA ESTRUTURA MOLECULAR DE LIGANTES DE SUPERFÍCIE EM PONTOS QUÂNTICOS DE CdTe DISPERSOS EM ÁGUA

Water-soluble CdTe quantum dots are synthesized to investigate how short-chain surface ligands bearing -SH, -COOH, and -NH2 groups interact with CdTe during nucleation/growth processes. Their optical properties and colloidal stability after the ligand exchange are also investigated. We then characterize the resulting CdTe by fluorescence, UV–Vis absorption, and infrared spectroscopies. The stability of the colloidal dispersions was determined by their Zeta potentials. The results show that in the synthesis of water-soluble CdTe, surface ligands with at least two functional groups are required and the hard/soft character of them is an important factor in the stability of CdTe.

VIDROS DE OXICARBETO DE SILÍCIO OBTIDOS A PARTIR DE POLISSILOXANOS

AbstractSilicon oxycarbide glasses (SiOC) are a class of amorphous materials with a similar silica glass structure, in which oxygen atoms are partially replaced by tetracoordenated carbon atoms. The presence of carbon atoms covalently bound to the silicon atoms creates a more interconnected structure with better strength, and excellent chemical stability than conventional silica. SiOCs are easily prepared by the pyrolysis of polysiloxanes and can potentially be implemented in several technological applications that require high temperatures. This paper mainly addresses the preparation, structure, and properties of SiOC. Furthermore, potential applications of SiOC are also introduced.

PREPARAÇÃO DE PONTOS DE CARBONO E SUA CARACTERIZAÇÃO ÓPTICA: UM EXPERIMENTO PARA INTRODUZIR NANOCIÊNCIA NA GRADUAÇÃO

Carbon dots (CDs) constitute a new class of carbon-based nanomaterials that measure less than 10 nm and display attractive physical and chemical features such as fluorescence. CDs have been considered the new “power” carbon nanomaterials since their accidental discovery in 2004. This study reports a simple, easy, and accessible experiment for undergraduate courses. The experiment involves the preparation of CDs by pyrolysis using commercial gelatin as a low cost precursor as well as CD purification and optical characterization. The optical properties of CDs such as absorption and emission properties make them a promising material for teaching the basic concepts and techniques used for characterization of nanomaterials. Also, the reactants and final product are suitable for undergraduate courses since they are non-toxic materials. The prepared CDs can be used in such applications as bioimaging, solar cells, and photocatalysis.

OBTENÇÃO DE COMPÓSITOS HÍBRIDOS BASEADOS EM HIDROGÉIS E CIMENTO PORTLAND

In this study, a novel hybrid composite based on biodegradable hydrogel and Portland cement with promising technological properties was reported. In the first step, a full 23 with central point factorial design was utilized to obtain the enhanced polyacrylamide-carboxymethylcellulose hydrogel compositions. A mathematical model was devised, indicating that the 3 main variables were significant and the AAm and MBAAm variables positively contributed to the mode and showing that the CMC variable had the opposite contribution. In the second step, these compositions were mixed with Portland cement to obtain the hybrid composites. The presence of cement improved the mechanical properties of polymeric matrices, and electronic microscopic micrographics revealed that the hydrogels were well adhered to the cement phase and no phase separation between hydrogel and cement was detected. Finally, using the energy dispersive X-ray technique, the elements Na, Mg, Al, Si, S, K, Ca and Fe were detected in the polymeric matrix, consistent with the hybrid composite formation.

Avaliação da resistência de cultivares e linhagens do feijoeiro comum a diferentes populações de Uromyces appendiculatus

A técnica de folhas destacadas tem sido utilizada para estudos relacionados a doenças de plantas. Neste trabalho foi utilizada a técnica de folhas de feijoeiro (Phaseolus vulgaris) destacadas e cultivadas em vermiculita, visando estudar a resistência de diversas cultivares a diferentes populações de Uromyces appendiculatus, coletadas em diferentes regiões ou épocas. Compararam-se os sintomas da doença na planta com os observados nas folhas destacadas. Os sintomas nas folhas destacadas foram semelhantes aos das folhas nas plantas. As cultivares Novo Jalo, Corrente e Aporé de feijoeiro foram resistentes a todas as populações do patógeno. A técnica de folhas destacadas e cultivadas em vermiculita mostrou-se útil e vantajosa com relação às demais técnicas de avaliação de resistência. Por permitir a inserção de várias folhas num mesmo recipiente, facilita a avaliação de maior número de cultivares em menor espaço, além de proporcionar melhor comodidade durante a execução do trabalho.

Arranjo espacial do vira-cabeça do fumo em arapiraca, estado de alagoas

O vira-cabeça do fumo (Nicotiana tabacum), causado pelo Groundnut ringspot virus (GRSV), do gênero Tospovirus, tem sido observado em alta incidência em determinadas áreas da região fumageira do agreste do estado de Alagoas. O arranjo espacial da doença foi analisado em duas áreas de plantio (A e B), formadas por quatro parcelas cada, localizadas no município de Arapiraca. As parcelas foram avaliadas semanalmente, sendo efetuado o mapeamento espacial de plantas sadias e com sintomas de vira-cabeça, bem como determinada a incidência da doença, representada pelo número de plantas com sintomas em relação ao total de plantas avaliadas. Pelas análises de "ordinary runs" e autocorrelação espacial, foi constatada a predominância do arranjo aleatório de plantas doentes, embora tenha sido detectada agregação em alguns casos. Embora não se descarte a possibilidade de mudas infetadas terem influenciado no arranjo da doença, a hipótese mais provável é que as infecções ocorreram principalmente pelo inóculo primário transmitido por tripes virulíferos entrando nas parcelas, oriundos de reservatórios externos.

Análise de restrição de DNA ribossomal amplificado (ARDRA) pode diferenciar Fusarium solani f. sp. phaseoli de F. solani f. sp. glycines

Métodos moleculares têm sido utilizados para caracterizar a diversidade entre isolados de Fusarium spp. patogênicos e não patogênicos a uma cultura e, para determinar relações genéticas entre formae speciales. Testes de patogenicidade realizados em soja (Glycine max) e feijoeiro (Phaseolus vulgaris) com 17 isolados de Fusarium solani não demonstraram especificidade de hospedeiros. Utilizou-se a técnica ARDRA (Amplified Ribosomal DNA Restriction Analysis) para analisar a região ITS1 - 5,8S rDNA - ITS2, amplificada com os primers ITS5 e ITS4. Os produtos amplificados foram digeridos com as enzimas de restrição Hae III e Msp I. Os padrões de bandas gerados pela digestão com a enzima Hae III permitiram diferenciar três grupos entre os isolados de F. solani, sendo um grupo específico para isolados de F. solani f. sp. phaseoli com 100% de similaridade entre os 11 isolados. Entre os isolados de F. solani f. sp glycines foram observados dois padrões distintos de restrição. A técnica de ARDRA utilizando a enzima Hae III apresenta, portanto, potencial para utilização como um marcador para diferenciação entre as formae specialesphaseoli e glycines, dentro do complexo F. solani.