Microbiological and physicochemical characterization of surimi obtained from waste of piramutaba fillet

The aim of this work was to perform the microbiological and physicochemical characterization of surimi made from waste of piramutaba filleting. The results of physicochemical characterization of the waste and surimi were: moisture (76.37 and 79.11%), total lipids (5.35 and 0.74%), proteins (14.92 and 10.79%), ash (3.03 and 2.35%), pH (6.9 and 7.4), caloric value (109.15 and 77.86 kcal.g-1), and water activity (both 0.98), respectively. The results of the levels of total volatile bases were 7.29 mgN/100-1 g (waste) and 7.01% carbohydrate (surimi). The values of total lipids and proteins were reduced during the preparation of surimi, probably due to successive washes during the processing. Waste and surimi were examined microbiologically and are in compliance with required parameters. The results show a loss of red (a* parameter) and yellow (b* parameter) color. On the other hand, the L* parameter (lightness) increased after the processing of surimi. It can be concluded that piramutaba waste can be used for surimi preparation and as a source of nutrients for human consumption, providing an alternative use of these wastes avoiding their disposal polluting the environment.

Use of colour parameters for roasted coffee assessment

Fast and non-destructive indicators were evaluated as tools to measure the technological quality of Arabica and Robusta coffee. Accordingly, considering the roasting intensity in highly valuable commercial samples, volume, mass, apparent density, moisture, total ash, ash insoluble in hydrochloric acid, and ether extract were characterized. The chromatic parameters L*, C*, Hº were measured using illuminants D65 and C. It was found that in roasted coffee beans, the parameters L*, C*, Hº, and coordinate b* had an antagonist interaction due to an increase in the roasting intensity, whereas after milling, only L* and Hº decreased progressively. Considering that the parameters L* and Hº followed similar patterns using both illuminants, D65 and C, it can be concluded that they are appropriate to evaluate coffee colour changes during roasting, enabling a relationship with coffee quality.

Processing, physicochemical, and sensory analyses of ostrich meat hamburger

The objective of this study was to assess the potential utilization of ostrich meat trimming in hamburger preparation, as well as its physicochemical and sensory characterization. Using ostrich meat trimmings from the legs and neck, four different formulations were prepared with varied amounts of bacon and textured soybean protein. Physical analysis of yield, shrinkage percentage, and water retention capacity and chemical analysis of proximate composition, cholesterol levels, and calories were performed. The formulations underwent sensory analysis by 52 potential ostrich meat consumers, who evaluated tenderness, juiciness, flavor, and purchase intent. The formulations containing textured soybean protein showed the highest yield, lowest shrinkage percentage, and highest water retention capacity. Lipid content varied from 0.58 to 4.99%; protein from 17.08 to 21.37%; ash from 3.00 to 3.62%; moisture from 73.87 to 76.27%; cholesterol from 22.54 to 32.11 mg.100 g-1; and calorie from 87.22 to 163.42 kcal.100 g-1. All formulations showed low cholesterol and calorie levels, even that containing 10% bacon and 3.5% textured soybean protein, which achieved the best scores and acceptance by the panelists.

Physicochemical and microbiological characterization of cassava flower honey samples produced by africanized honeybees

Cassava producers in the region of Marília-São Paulo are integrating their farming activity with beekeeping to diversify their income. The aim of this study was to evaluate the physicochemical and microbiological quality of honey samples produced by Africanized honeybees Apis mellifera from cassava flower in 2008. Analysis were carried out for pH, total soluble solids (TSS), acidity, moisture, reducing and total sugars, apparent sucrose, hydroxymethylfurfural, color, ash, proteins, water insoluble solids, diastasic activity, mineral content, microbiological evaluations, and mineral and hydrocyanic acid (HCN) content. The honey samples showed physicochemical and microbiological characteristics favorable to commercialization, with the exception of apparent sucrose and acidity, which show the need for a narrow focus of attention to the honey maturation degree at the harvest time and more careful monitoring during production and processing. The commercialization of Brazilian cassava honey, still little explored, can be widely spread in the market since the levels of hydrocyanic acid (HCN) showed no consumption risk; in addition the simultaneous production of honey and cassava provides an alternative to family income increase.

Comparison between freeze and spray drying to obtain powder Rubrivivax gelatinosus biomass

The use of colorants in products of animal origin is justified by the improvement in the color of foods since this attribute is considered a quality criterion. These additives can be produced using industrial effluents as substrates and appropriate organisms, such as Rubrivivax gelatinosus. Oxycarotenoids represent a class of carotenes responsible for the pigmentation of animals and vegetables. R. gelatinosus grows in fish industry effluent with the resulting production of a bacterial biomass containing oxycarotenoids. The purpose of this study was to compare the use of two drying processes - spray and freeze drying - to obtain powder biomass in terms of the process parameters (yield, productivity, and product recovery) and the product characteristics (color, proximate composition, and oxycarotenoids). No difference was detected in the yield between these techniques, while productivity was higher using spray drying. Higher product recovery and moisture were achieved with freeze drying, while ash was higher with spray drying. The freeze dried biomass was redder, darker and less saturated than the spray dried biomass. No difference in oxycarotenoids was detected between the biomasses. Although it results in lower recovery rate, spray drying was faster and more productive, and it provided the same yield as freeze drying, which makes it the method of choice for obtaining R. gelatinosus biomass.

Studies of chemical and enzymatic characteristics of Yacon (Smallanthus sonchifolius) and its flours

Due to the importance of studies on yacon related to health, its in natura pulp, in natura peel, pulp flour, and peel flour were chemically analyzed in terms of its centesimal composition, specific minerals, total dietary fiber and fractions, pH, total soluble solids, total titratable acidity, tannins, oxalic acid, and nitrate. The polyphenoloxidase and peroxidase enzymatic activities were evaluated for in natura pulp and peel only. Yacon pulp and peel flour presented average yield of 7.94% and 10.86%, respectively. The in natura pulp presented a higher moisture and carboydrate content and lower lipid, protein, total dietary fiber, and ash than those of the peel flour. The same pattern was observed for pulp flour when compared to peel flour. The highest tannin, nitrate, and oxalic acid levels were found in the peel flour, 15,304.5 mg.kg-1, 1,578.3 mg.kg-1, and 7,925.0 mg.kg-1 (wet weight), respectively. The polyphenoloxidase and peroxidase enzymes presented higher enzymatic activity in the yacon peel. Based on the results obtained, it can be said that the yacon and its derivatives are important dietary carbohydrate and mineral sources and contain antinutritional substance contents lower than those harmful to health.

Physicochemical and microbiological parameters of dried salted pork meat with different sodium chloride levels

The objective of this study was to evaluate the physicochemical and microbiological parameters of pork meat submitted to dry salting. Sodium chloride (NaCl) was added at levels of 0%, 2.5%, 5%, 7.5% or 10% by the meat weight. Dry salting technique was used, which consists of rubbing the sodium chloride manually, followed by a rest period. The data were submitted to analysis of variance using a completely randomized experimental design. The means were compared by Duncan test at 5%. The salting process reduced (P < 0.05) humidity and water activity, and it increased (P < 0.05) ash, chloride, palmitic acid, and water holding capacity levels compared to those of the control. Luminosity (L*) was lower (P < 0.05) in the control, and a* color was more intense in samples with 2.5% NaCl. Cooking loss was lower (P < 0.05) in the samples salted with 5% and 10% NaCl, and similarity was observed between the levels 0 and 7.5% salt. The treatments with levels 0% and 2.5% NaCl had higher mesophilic counts. The other microbiological parameters were within limits established by law. Therefore, salting with 5% NaCl can be used in pork meat in order to maintain the physicochemical and microbiological characteristics of the final product.

Effect of soaking on the nutritional quality of pequi (Caryocar brasiliense Camb.) peel flour

Pequi peel comprises 76% of the whole fruit and it is discarded during consumption. Thus, pequi peel has been considered a solid residue, although it has potential for use in various applications. Limitations in the use of this material are mainly due to the lack of information of its nutritional composition, especially about the toxic or antinutritional factors. Soaking is often used to prepare complementary foods and has been reported to be beneficial for enhancing nutritive value. The effect of soaking on the nutritional quality of pequi peel flour was determined by measuring changes in chemical composition, antinutritional factors, total phenols and in vitro protein and starch digestibility. The results showed that 24 h of maceration increases the content of lipids (200%), protein (28.3%) and dietary fibber (31%), while carbohydrate and ash content decreases. There were no haemagglutination activity or α-amylase inhibitors, but it was detected the presence of phytic acid (0.4 g 100 g-1). The soaking reduced 8.5% phenols and 19.0% tannins, 6.2% protein digestibility, and was also effective to eliminate trypsin inhibitors, and increase starch digestibility (24.2%). Soaking was efficient to improve nutritional characteristics of the pequi peel flour, opening up possibilities for its use in food formulations.

Antioxidant capacity and chemical composition in seeds rich in omega-3: chia, flax, and perilla

The chemical composition and antioxidant capacity of five seeds, chia, golden flax, brown flax, white perilla, and brown perilla, were determined. The chemical properties analyzed included moisture, ash, crude protein, carbohydrates, total lipids, fatty acids, and antioxidant capacity (ABTS•+, DPPH•, and FRAP). The results showed the highest amounts of protein and total lipids in brown and white perilla. Perilla and chia showed higher amounts of alpha-linolenic fatty acid than those of flaxseed varieties, ranging between 531.44 mg g-1 of lipids in brown perilla, 539.07 mg g-1 of lipids in white perilla, and 544.85 mg g-1 of lipis in chia seed. The antioxidant capacity of the seeds, evaluated with ABTS•+, DPPH• , and FRAP methods, showed that brown perilla had greater antioxidant capacity when compared with white perilla, flax, and chia seeds.

Biochemical characteristics of composite flours: influence of fermentation

The purpose of this study was to introduce yam in the development of two new composite flours containing soy and cassava. Two composite flours were obtained after fermentation of yam, soybean, and cassava in respectively 60, 30, and 10% proportions. Two varieties of yam were used: Dioscorea alata (variety "Bete bete") and Dioscorea cayenensis (variety "Lokpa"). Proximate composition, mineral content, some anti-nutritional factors (oxalates, phenols), microbiological quality, and α-amylase digestibility were determined for the fermented and unfermented composite flours. The results indicated that for the composite flours made of D. alata and D. cayenensis, fermentation increased ash and titrable acidity. Carbohydrates, pH, and energy decreased. Crude fat content was not affected by the fermentation process. Anti-nutritional factors such as oxalates and phenols were found to decrease significantly after the fermentation of the composite flours. Fermentation increased the mineral content (Mg, K, Fe, and Ca) of the composite flours. A decrease in P and Na was observed after fermentation. The microbiological study showed that safety flours contain no potential pathogenic germs. The in vitro α-amylase digestibility of the composite flours was significantly improved after fermentation. The biochemical characteristics and good hygienic quality of the obtained flours suggest that these flours can be considered as a feeding alternative for children in poor areas where yam is produced.

Stability of frozen marolo pulp during storage

Marolo, also known as araticum or head-to-black, is a globular berry, a species native to the Brazilian savannah. The aim of this study was to evaluate the physical, chemical, and microbiological stability of frozen marolo pulp during 12 months of frozen storage. It was observed that the levels of ash (0.28-0.22%), protein (0.77-0.71%), lipids (1.75-1.73%), carbohydrates (12.1-10.15%), calorie (67.23-59.01 kcal), sucrose (2.50-1.29%), citric acid (435.63-197.5 µg.g-1), tartaric acid (4.38-1.88 µg.g-1) , acetic acid (470.38-279.25 µg.g-1), ascorbic acid (3.00-0.00 µg.g-1), total pectin (0.67-0.39%), pH (3.88-3.83), and b* chromaticity coordinates (24.85-20.53) decreased reduced during storage, whereas the levels of moisture (85.10-87.19%), color parameters (L* 58.89-62.62 and a* 5.37-7.86), reducing sugars (4.53-5.62%), total soluble sugars (7.1-7.36%), soluble solids (7.0-8.4 ºBrix), total acidity (0.9-1.0%), malic acid (514.13-781.25 µg.g-1), soluble pectin (0.16-0.24%), and antioxidant (6.85-37.35% of DPPH discoloration) increased over the one-year of storage period. According to the physical, chemical, and microbiological parameters assessed, the product can be stored for 12 months without loss of quality with addition of citric acid as a preservative.

Changes in the physicochemical and microbiological properties of frozen araça pulp during storage

Araça belongs to the Myrtaceae family and is popularly known as araçá-comum, araçá-azedo, or araçá-do-campo. Frozen fruit pulp is of great importance for the food industry, which can produce it at the time of harvest, store it, and use it according to the demand of the consumer market and/or as an ingredient in the formulation of products such as yogurt, candies, and ice creams among others. The aim of this study was to evaluate the physical, chemical, and microbiological stability of frozen araça pulp during 12 months of frozen storage. It was observed that the levels of moisture (90.55-88.75%), ash (0.34-0.26%) total soluble sugars (7.11-6.62%), sucrose (3.55-1.39%), soluble pectin (0.24-0.23%), total pectin (0.5-0.46%), pH (3.82-2.31%), organic acids (698.12-122.25 µg.g-1 citric acid), and phenolic compounds (6.22-0.00 mg GAE.100 g-1) decreased during storage, whereas the levels of protein (0.61-0.83%), lipids (0.14-0.38%), total carbohydrates (8.36-9.78%), calorific value (37.14-45.86 kcal.100 g-1), reducing sugars (3.51-5.21%), soluble solids (5.17-6.0%), total antioxidant capacity (6.89-35.13%), and color parameters (L*49.75-50.67; a*0.79-1.82 and b*22.5-25.19) increased over the one-year storage period. According to the chemical and microbiological parameters assessed, the product can be stored for 12 months without loss of quality with addition of citric acid as a preservative.

Chemical composition and bioactive compounds of grape pomace (Vitis vinifera L.), Benitaka variety, grown in the semiarid region of Northeast Brazil

Grape pomace (Vitis vinifera L.), Benitaka variety, grown in the semiarid region of Northeast Brazil was evaluated in relation to chemical composition, and content of minerals and functional properties. Its microbiological quality and toxic potential, using Artemia salina sp, were also investigated. The results showed that the flour obtained from these residues had below neutral pH (3.82), moisture (3.33g/100g), acidity of (0.64g of citric acid/100g), and ash (4.65 g/100g). The amount of total dietary fiber (46.17g/100g) stood out quantitatively compared to the content of carbohydrate (29.2g/100 g), protein (8.49g/100g), and lipids (8.16g/100g). The total energy was 224Kcal/100g. With regard to the compounds with functional properties, higher values of insoluble fiber 79% (36.4 g/100 g); vitamin C (26.25 mg of acid ascorbic/100g), and anthocyanins (131mg/100g) were found. The minerals iron, potassium, zinc, manganese, and calcium were present in higher concentrations. There were no significant copper values. The results showed that the grape residues are an important source of nutrients and compounds with functional properties suggesting that they can be incorporated as an ingredient in the diet and/or used as a dietary supplement aiming at health benefits. The residues did not show microbiological contamination and were considered nontoxic.

Crossflow microfiltration of sugarcane juice: effects of processing conditions and juice quality

Sugarcane juice with passion fruit pulp was clarified using microfiltration under different T (temperature), P (pressure), and V (tangential velocity). The effects of these processing parameters were evaluated applying a rotational central composite experimental design (RCCD) and response surface methodology (RSM). The tests were performed at a filtration pilot plant using a polyamide hollow-fiber membrane with an average pore diameter of 0.4 µm and filtration area of 0.723 m². In addition, the resistances to the permeate flux during the microfiltration were investigated according to the series resistance. The final permeate flux ranged from 7.05 to 17.84 L·h- 1·m- 2. There was a rapid decline in flux (50%) in the initial stages of microfiltration. T and V were the major variables responsible for the flux increase. The concentration polarization showed the greatest influence on the flux decline, and highest values for the flux decline rate (λ) were found when low pressures were used. In the clarified juice there was a reduction in the contents of total solids, proteins, vitamin C, and acidity, while the soluble solids, pH, and ash contents did not change. Finally, membrane process could produce high quality filtered sugarcane juice with substantial flux and increased luminosity improving organoleptical properties.

Bioactive compounds and acceptance of cookies made with Guava peel flour

The use of fruit industrial waste in the processing new foods represents an important new step for the food industry. This study aimed to develop cookie recipes using different amounts of guava peel flour (GPF) levels (30%, 50%, and 70%) to evaluate the proximate composition, and the phenolic compound, lycopene, and β-carotene levels in the cookies and flour and to evaluate the cookie sensory acceptance. The results demonstrated low moisture, lipid and carbohydrate contents in the flour and cookies. GPF was considered rich in fiber, ash, polyphenols, and β-carotene. The sensory analysis showed satisfactory acceptance of the cookies containing 30% GPF regarding the aroma, flavor, and texture attributes. The cookies containing 50% and 70% GPF received satisfactory acceptance regarding to aroma only. In conclusion, GPF can be used to partially replace wheat flour in the preparation of cookies to improve the nutritional quality without affecting the product sensory quality.