Soil physical attributes in chemigated banana plantation with wastewater

ABSTRACT The feasibility of using sewage wastewater as a water and nutrient source for plants is an alternative to harness agricultural natural resource, observing its influence on the organic matter dynamics and soil energy. Our objective here was to evaluate the effects of applying different doses of effluent from a sewage treatment plant, in Janaúba – MG, Brazil, over the physical attributes of a soil grown with “Prata Anã” banana. From soil sample collection at depths of 0-20, 20-40, and 40-60 cm, we determined the following soil properties: soil density, total porosity, macroporosity, microporosity, organic matter, clay dispersed in water and stability of soil aggregate. The experimental design was in randomized blocks with four repetitions. Wastewater raising doses promoted increase in suspended solids, contributing to macroporosity reduction at 20-40 and 40-60 cm depths; as well as a reduction in organic matter within 0-20 cm layer. Clay dispersal was observed in the depths of 0-20 cm, being derived from an increase in sodium content. Concurrently, there was a reduction of soil aggregate stability.

Physical attributes of a pasture soil in southeast Goiás determined by geostatistics

ABSTRACT This study aimed to evaluate the spatial dependence of physical attributes in a soil cultivated with Brachiaria grass. A 12-m regular sampling grid was established within an area of 3.500 m2. Thirty-five soil samples were collected at 0-30 cm depth for particle density, bulk density, texture and total porosity analysis. These data were evaluated using statistical methods of indicator kriging and the GS+ software. The GS+ software was used to develop three-dimensional maps and evaluate semivariograms. The spatial dependence was evaluated using experimental semivariograms. The analyzed attributes indicated the occurrence of spatial dependence when fit to the exponential model. Areas with higher porosity occurred in the regions with lower bulk densities and higher particle densities.

Effect of harvest at different times of day on the physical and chemical characteristics of vegetable-type soybean

The objective of this study was to evaluate the effect of harvest at different times of day on the chemical and physical characteristics of vegetable-type soybean BRS 267 cultivar, harvested at the R6 stage (seed development) and to compare it with that on the grains harvested at the R8 stage (maturation). The pods of the BRS 267 cultivar were harvested at the R6 stage (at 8:00 AM, 12:00 AM, and 6:00 PM), the color parameters were evaluated, and the grains were analyzed for chemical composition, activity inhibitor trypsin, phytic acid content, starch, sugars, fatty acids, and isoflavones. No differences were observed among the different harvest times in terms of the chemical constituents of vegetable-type soybean BRS 267 cultivar harvested at the R6 stage. Isoflavones content did not change with different harvest times, and the aglycone forms (daidzein, glycitein, and genistein) were found in smaller quantities at the R6 stage compared to the R8 stage. The color of the pods of soybean BRS 267 cultivar, harvested at the R6 stage did not change with different harvest times. The grains harvested at the R6 stage had lower protein content, phytic acid, and sucrose and higher levels of lipids, carbohydrates, starch, glucose, fructose, stachyose, and linolenic acids than those collected at the R8 stage. The different times of harvest did not affect the quality of the vegetable-type soybean BRS 267 cultivar harvested at stage R6. Nevertheless, it is recommended to harvest in the morning, when the temperature is milder, like other vegetables, to facilitate and optimize its marketing and in natura consumption.

Physical, chemical, technological and sensory characteristics of Frankfurter type sausage containing okara flour

The addition of okara flour to an emulsified meat product (Frankfurter type sausage) was evaluated based on the physical, chemical, technological, and sensory characteristics of the final product. Okara, residue from soymilk production, was provided by two soymilk producing companies whose production systems were based on the hot disintegration of the decorticated (company B) or undecorticated (company A) soybeans. The okara was dehydrated using a flash dryer and then ground into flour (>420 µm). However, The okara flours A and B showed approximately the same amount of protein (35 and 40 g.100 g-1 dwb). However, the okara flour A presented higher values (p < 0.05) for all technological functional properties studied (emulsification capacity, emulsion stability, protein solubility, and water hold capacity) than those of okara flour B. The A and B okara flours were used in a frankfurter sausage formulation as substitution of 1.5% and 4% of meat. The results showed that the sausages containing okara flours A and B, as well as the control sausage, were accepted by the sensory panel. Moreover, there were no significant differences (p < 0.05) in the physical (color, objective texture, and emulsion stability) and chemical (pH and proximate composition) measurements of the sausages with and without the okara flour.

Soymilk plain beverages: correlation between acceptability and physical and chemical characteristics

The objective of the research was to relate the physical and chemical characteristics of soymilk plain beverages to its sensory acceptance. Five commercial products and a new product formulated based on the less accepted sample were used. The overall acceptance was evaluated by 102 assessors using a 10-point hybrid hedonic scale. The hedonic scores ranged from 3.8 (sample E) to 7.0 (A). Most assessors (55%) preferred sample A, which was viscous (26.6 cp), dark (L* = 77.7), and slightly acidic (pH = 6.6). Sample C, which had lower solid content and higher acidity, was preferred by 29% of the assessors. These two beverages showed the greatest commercial potential of the products analyzed. The least-accepted sample (E), preferred by 8% of the assessors, had a lighter color (L* = 96.8), lower viscosity (13.5 cp), higher lipid content (2.2 g/100 g), and less protein (1.68 g/100 g) than the other products evaluated. A reformulation of the least preferred product (E) with the addition of maltodextrin and also vanilla and milk flavors increased its acceptance, yielding an average score of 7.2. Overall, it was observed that a soymilk plain beverage with higher viscosity, darker color, and higher protein content best meets consumer expectations.

Extrusion of blends of cassava leaves and cassava flour: physical characteristics of extrudates

A cassava-based puffed snack was produced using a single screw extruder to determine the effect of the raw material composition (cassava leaf flour and moisture) and the process parameters (extrusion temperature and screw speed) on the physical characteristics of an extruded-expanded snack. A central composite rotational design, including four factors with 30 treatments, was used with the following as dependent variables: expansion index, specific volume, water solubility index, water absorption index, color (L*, a*, b*), and hardness. Under conditions of low moisture content (12 to 14%), low percentage of cassava leaf flour (2 to 4%), and intermediate conditions of extrusion temperature (100°C) and screw speed (230rpm), it was possible to obtain puffed snack products with desirable characteristics.

Study of the physical and physicochemical characteristics of fruits of the licuri palm (Syagrus coronata (Mart.) Becc.) found in the Atlantic Forest of Minas Gerais, Brazil

AbstractThe Atlantic Forest has species of native fruits, consumed fresh and processed, which have an important contribution to food sovereignty of families that consume it. This study examined the physical and physicochemical characteristics, proximate composition, concentration of carotenoids, vitamin C, vitamin E and minerals in the pulp and kernels of fruits of licuri (Syagrus coronata (Mart.) Becc.). Titratable acidity was analyzed by volumetric neutralization, soluble solids by refractometry, proteins by the micro-Kjeldahl method, lipids by gravimetry using soxhlet, dietary fiber by non-enzymatic gravimetry, carotenoids and vitamin C by HPLC-DAD, vitamin E by HPLC-fluorescence, and minerals by ICP-AES. Pulp were a source of Zn (0.95 mg 100–1), a good source of fiber (6.15 g 100–1), excellent source of provitamin A (758.75 RAE 100–1), Cu (0.69 mg 100–1), Fe (3.81 mg 100–1), Mn (3.40 mg 100–1) and Mo (0.06 mg 100–1). The kernel were a source of Fe (3.36 mg 100–1) and excellent source of Mn (6.14 mg 100–1), Cu (0.97 mg 100–1) and Mo (0.07 mg 100–1). The nutritional value and wide availability of licuri fruit make it an important resource for reducing food insecurity and improving nutrition of the rural population and other individuals who have access to it.

Influence of heat treatment on the sensory and physical characteristics and carbohydrate fractions of french-fried potatoes (Solanum tuberosum L.)

AbstractThe aim of this study was to analyze the impact that heat treatment with salts and freezing processes on the sensory, instrumental, and physico-chemical characteristics of fried potatoes of the Monalisa cultivar. The potatoes were blanched in distilled water (P); sodium chloride solution (B1); calcium chloride solution (B2), and a solution with both of these salts (B3). They were then pre-cooked and frozen for 24 hours and for 30 days. After frying, sensory characteristics were analyzed (color, texture, flavor, oiliness), along with overall preference and instrumental determinations of texture, color, and oil content. Further tests were conducted on the sample with the best results in the sensory analysis (B1), along with sample P as a control, to determine granule microstructure, carbohydrate fractions, glycemic index, and glycemic load. Blanching B3, despite reducing oil absorption and providing less oiliness, obtained lesser overall preference. Freezing for 30 days increased the lightness, except for when sodium chloride was used, which intensified the color yellow. The use of sodium chloride did not interfere with the type of starch granules, nor with the formation of resistant starch; however, longer freezing time reduced the glycemic index and concentrated the dietary fiber content. All samples exhibited low glycemic index and moderate glycemic loads.

Effect of different proportions of brea gum in the functional characteristics of wheat flour starch: impact on the physical quality of bread

The aim of this work was to study the changes induced by BG in the behaviour of wheat starch, and observe the influence of these variations on the quality of a basic white bread. The effect of four BG addition levels in the wheat flour functional characteristics (WAI, WSI, and pasting properties) and bread quality (physical parameters, crumb grain structure, moisture and hardness) was investigated. The highest levels of BG (1% and 2%) decreased the peak viscosity, and increased the stability and setback of the flour. This was due to a lower gelatinization of the starch granules, caused by a competition for water between the hydrocolloid and starch. These changes influenced the bread quality. The loaves added with 1% and 2% of BG presented smaller alveoli: this resulted in more compact, hard and less airy crumbs. Nevertheless, the moisture of the samples at 1% and 2% of added gum was higher than the control bread. However, the incorporation of BG at 0.5% did not affect the pasting parameters and bread quality, but increased moisture of crumb, so this concentration would be most recommended for baking, since higher humidity could favour the shelf- life of the product.

Sensory response and physical characteristics of gluten-free and gum-free bread with chia flour

Abstract The aim of this study was to evaluate the physical quality and sensory acceptance of gluten-free breads with different percentages of chia flour (Salvia Hispanica L .). The chia flour was used to substitute rice flour and soy flour in order to replace the gum required in this type of bread. Four formulations were developed; a standard made with gum, and three formulations with 2.5%, 5.0% and 7.5% of chia flour. Analyses of specific volume, cooking losses and the rise in dough of the breads were performed. Sensory analysis included tests for affective acceptability and purchase intent. The results showed that the bread with 2.5% chia flour had specific volume and cooking losses similar to the standard. In terms of the rise in dough, the standard showed the highest values, followed by the bread made with 5.0% chia flour. The substitution of soy and rice flour with 2.5% of chia flour produced bread with sensory characteristics similar to the standard in all of the analyzed attributes; it also received higher purchase intent. Using chia flour at a concentration of 2.5%, compared to rice flour and soy flour, proved that it was possible to replace gum in the bread formulation.

Soil profile internal drainage for a central pivot fertigated coffee crop

Coffee cultivation via central-pivot fertigation can lead to fertilizer losses by soil profile internal drainage when water application is excessive and soils have low water retention and cation adsorption capacities. This study analyses the deep water losses from the top 1 m sandy soil layer of east Bahia, Brazil, cultivated with coffee at a high technology level (central-pivot fertigation), using above normal N fertilizer rates. The deep drainage (Q) estimation is made through the application of a climatologic water balance (CWB) program having as input direct measures of irrigation and rainfall, climatological data from weather stations, and measured soil water retention characteristics. The aim of the study is to contribute to the understanding of the hydric regime of coffee crops managed by central-pivot irrigation, analyzing three scenarios (Sc): i) rainfall only, ii) rainfall and irrigation full year, and iii) rainfall and irrigation dry season only. Annual Q values for the 2008/2009 agricultural year were: Sc i = 811.5 mm; Sc ii = 1010.5 mm; and Sc iii = 873.1 mm, so that the irrigation interruption in the wet season reduced Q by 15.7%, without the appearance of water deficit periods. Results show that the use of the CWB program is a convenient tool for the evaluation of Q under the cited conditions.

Nutrient accumulation and biomass production of alfafa after soil amendment with silicates

Studies on the use of silicate correctives in agriculture show that they have great potential to improve soil chemical characteristics, however, little information is available on the reactivity rates of their particle-size fractions. This study investigated whether the reactivity rates obtained experimentally could be considered in the calculation of ECC (effective calcium carbonate) for soil liming, promoting adequate development of alfalfa plants. Six treatments were evaluated in the experiment, consisting of two slag types applied in two rates. The experimental ECC was used to calculate one of the rates and the ECC determined in the laboratory was used to calculate the other. Rates of limestone and wollastonite were based on the ECC determined in laboratory. The rates of each soil acidity corretive were calculated to increase the base saturation to 80%. The treatments were applied to a Rhodic Hapludox and an Alfisol Ferrudalfs. The methods for ECC determination established for lime can be applied to steel slag. The application of slag corrected soil acidity with consequent accumulation of Ca, P, and Si in alfalfa, favoring DM production.

Prevalence and correlates of physical activity among adolescents from Southern Brazil

OBJECTIVE: To estimate the prevalence and identify correlates of physical activity among adolescents. METHODS: Cross-sectional study nested within a cohort of 4,325 subjects from the city of Pelotas, Southern Brazil, aged 14-15 years in 2008. Physical activity was analyzed using three different approaches: (1) prevalence of any leisure-time physical activity; (2) prevalence of any active commuting to school; and (3) prevalence of engaging in at least 300 minutes per week of both (1) and (2) combined. Independent variables included sociodemographic, behavioral, social, and biological characteristics, and number of different leisure-time physical activites practiced. Statistical analyses were carried out using Poisson regression. RESULTS: The proportion of adolescents involved in any type of leisure-time physical activity was 75.6%, while 73.4% displayed some form of active commuting to school. Prevalence of total physical activity score (> 300 min/week) was 48.2%, being greater among boys (62.6%) than among girls (34.5%). Furthermore, prevalence increased along with the number of physical activity modalities practiced (p<0.001). Factors associated with greater physical activity (leisure + commuting) at the recommended levels were: nonwhite skin color, having failed at school, and playing videogames. Lower socioeconomic status, more time spent on the computer, and parental physical activity were associated with the outcome only among girls. CONCLUSIONS: Less than half the adolescents reached recommended levels of physical activity, and this proportion tended to decrease among subjects with higher socioeconomic level. Associated factors were different for leisure-time and commuting. Engaging in a wide variety of physical activities should be encouraged already during childhood.

Effects of irregular-shift work and physical activity on cardiovascular risk factors in truck drivers

OBJECTIVE: To analyze the putative effect of type of shift and its interaction with leisure-time physical activity on cardiovascular risk factors in truck drivers.METHODS: A cross-sectional study was undertaken on 57 male truck drivers working at a transportation company, of whom 31 worked irregular shifts and 26 worked on the day-shift. Participants recorded their physical activity using the International Physical Activity Questionnaire along with measurements of blood pressure, body mass index and waist-hip ratio. Participants also provided a fasting blood sample for analysis of lipid-related outcomes. Data were analyzed using a factorial model which was covariate-controlled for age, smoking, work demand, control at work and social support.RESULTS: Most of the irregular-shift and day-shift workers worked more than 8 hours per day (67.7% and 73.1%, respectively). The mean duration of experience working the irregular schedule was 15.7 years. Day-shift workers had never engaged in irregular-shift work and had been working as a truck driver for 10.8 years on average. The irregular-shift drivers had lower work demand but less control compared to day-shift drivers (p < 0.05). Moderately-active irregular-shift workers had higher systolic and diastolic arterial pressures (143.7 and 93.2 mmHg, respectively) than moderately-active day-shift workers (116 and 73.3 mmHg, respectively) (p < 0.05) as well as higher total cholesterol concentrations (232.1 and 145 mg/dl, respectively) (p = 0.01). Irrespective of their physical activity, irregular-shift drivers had higher total cholesterol and LDL-cholesterol concentrations (211.8 and 135.7 mg/dl, respectively) than day-shift workers (161.9 and 96.7 mg/dl, respectively (ANCOVA, p < 0.05).CONCLUSIONS: Truck drivers are exposed to cardiovascular risk factors due to the characteristics of the job, such as high work demand, long working hours and time in this profession, regardless of shift type or leisure-time physical activity.

Environmental analyses of the parasitic profile found in the sandy soil from the Santos municipality beaches, SP, Brazil

The environmental contamination by geohelminths represents a world public health problem and has been well documented by several authors. However, few papers describe the presence of such contamination in saline soils of coastal beaches. A study was performed on the beaches of the municipality of Santos in the period between May 2004 to April 2005 with the aim of determining the degree of contamination, and the correlation between contamination level and seasonal conditions and characteristics of the environment. Of the 2,520 samples analyzed, 18.2% (458) were contaminated, 32.3% (148) of which were localized in children's recreational areas (playgrounds). The parasite profile found in the analyzed samples indicated the presence of several zoonotic parasites: Ancylostoma larvae (82.5%), Toxocara sp. eggs (59.4%), Ancylostomidae-like eggs (37.1%), coccid oocysts (13.5%), Trichostrongylus sp. eggs and larvae, Ascaris lumbricoides eggs, (11.6%), Entamoeba sp. cysts (10.0%), Strongyloides sp. (4.8%), several free nematoids and some non-identified parasitic structures (3.3%). It was established that the highest frequency of parasitic structures occurred in the months between May and October 2004, and from February to March 2005. An increase in the diversity of parasitic forms was documented in the months between February to December 2004 and from January to April 2005, these periods having the highest rainfall.