Serological based monitoring of a cohort of patients with chronic Chagas disease treated with benznidazole in a highly endemic area of northern Argentina

This study aimed to evaluate well-documented diagnostic antigens, named B13, 1F8 and JL7 recombinant proteins, as potential markers of seroconversion in treated chagasic patients. Prospective study, involving 203 patients treated with benznidazole, was conducted from endemic areas of northern Argentina. Follow-up was possible in 107 out of them and blood samples were taken for serology and PCR assays before and 2, 3, 6, 12, 24 and 36 months after treatment initiation. Reactivity against Trypanosoma cruzi lysate and recombinant antigens was measured by ELISA. The rate of decrease of antibody titers showed nonlinear kinetics with an abrupt drop within the first three months after initiation of treatment for all studied antigens, followed by a plateau displaying a low decay until the end of follow-up. At this point, anti-B13, anti-1F8 and anti-JL7 titers were relatively close to the cut-off line, while anti-T. cruzi antibodies still remained positive. At baseline, 60.8% (45/74) of analysed patients tested positive for parasite DNA by PCR and during the follow-up period in 34 out of 45 positive samples (75.5%) could not be detected T. cruzi DNA. Our results suggest that these antigens might be useful as early markers for monitoring antiparasitic treatment in chronic Chagas disease.

Construction and validation of nursing diagnoses for individuals with diabetes in specialized care

OBJECTIVE To construct statements of nursing diagnoses related to nursing practice for individuals with diabetes in Specialized Care, on the basis of the Database of Nursing Practice Terms related to diabetes, in the International Classification for Nursing Practice (ICNP®) and in the Theory of Basic Human Needs and to validate them with specialist nurses in the area. METHOD Methodological research, structured into sequential stages of construction, cross-mapping, validation and categorization of nursing diagnoses. RESULTS A list was indicated of 115 statements of diagnostic, including positive, negative and improvement statements; 59 nursing diagnoses present in and 56 nursing diagnoses absent from the ICNP® Version 2011. 66 diagnoses with CVI ≥ 0.50 were validated, being categorized on the basis of human needs. CONCLUSION It was observed that the use of the ICNP® 2011 favored the specifications of the concepts of professional practice in care with individuals with diabetes.

Nursing workload in specialized Semi-intensive Therapy unit: workforce size criteria

Abstract OBJECTIVE To assess the nursing workload (NW) in Semi-intensive Therapy Unit, specialized in the care of children with Craniofacial anomalies and associated syndromes; to compare the amount of workforce required according to the Nursing Activities Score (NAS) and the COFEN Resolution 293/04. METHOD Cross-sectional study, whose sample was composed of 72 patients. Nursing workload was assessed through retrospective application of the NAS. RESULTS the NAS mean was 49.5%. Nursing workload for the last day of hospitalization was lower in patients being discharged to home (p<0.001) and higher on the first compared to last day of hospitalization (p< 0.001). The number of professionals required according to NAS was superior to the COFEN Resolution 293/04, being 17 and 14, respectively. CONCLUSION the nursing workload corresponded to approximately 50% of the working time of nursing professional and was influenced by day and outcome of hospitalization. The amount of professionals was greater than that determined by the existing legislation.

Dung beetle (Coleoptera, Scarabaeidae) assemblage of a highly fragmented landscape of Atlantic forest: from small to the largest fragments of northeastern Brazilian region

Human activities in tropical forests are the main causes of forest fragmentation. According to historical factor in deforestation processes, forest remnants exhibit different sizes and shapes. The aim of the present study was to evaluate the dung beetle assemblage on fragments of different degree of sizes. Sampling was performed during rainy and dry season of 2010 in six fragments of Atlantic forest, using pitfall traps baited with excrement and carrion. Also, we used two larger fragments as control. We used General Linear Models to determine whether the fragments presented distinguished dung beetle abundance and richness. Analysis of Similarities and Non-Metric Multidimensional Scaling were used to determine whether the dung beetle assemblage was grouped according to species composition. A total of 3352 individuals were collected and 19 species were identified in the six fragments sampled. Dung beetle abundance exhibited a shift according to fragment size; however, richness did not change among fragments evaluated. Also, fragments sampled and the two controls exhibited distinct species composition. The distinction on abundance of dung beetles among fragments may be related to different amount of resource available in each one. It is likely that the dung beetle richness did not distinguish among the different fragments due to the even distribution of the mammal communities in these patches, and consequent equal dung diversity. We conclude that larger fragments encompass higher abundance of dung beetle and distinct species. However, for a clearer understanding of effects of fragmentation on dung beetles in Atlantic forest, studies evaluating narrower variations of larger fragments should be conducted.

Uso alternativo da grade aradora superpesada na correção da acidez do solo em profundidade e na produção da aveia preta

A máxima eficiência da calagem depende, além da qualidade do material corretivo, de uma incorporação adequada quanto à profundidade e homogeneidade. Diante disto, objetivou-se avaliar o efeito dos modos de incorporação de calcário na produção da aveia preta e na correção da acidez no perfil do solo. Para isto, foi realizado um experimento em um Latossolo Vermelho distrófico textura argilosa, na região do Triângulo Mineiro, em Uberlândia (MG), no período de maio de 1995 a fevereiro de 1996. O delineamento experimental foi em parcelas subdivididas, com as parcelas principais organizadas em blocos, com três repetições. As parcelas foram constituídas pelos modos de incorporação do calcário: grade aradora pesada e grade niveladora GP+GN (14x34"); modo tradicional, com aração (4x26") e grade niveladora A+GN (60x22"); grade aradora superpesada e grade niveladora GSP+GN (14x34"); nas subparcelas, pelas doses de calcário dolomítico, como se segue: D0 = zero de calcário; D1 = dose para elevar V = 70%; D2 = dose para elevar V = 100%, que corresponderam a 0; 6,0 e 9,2tha-1, respectivamente. O modo de incorporação do calcário influiu na eficiência da calagem no perfil do solo. A gradagem pesada não foi adequada para a incorporação do calcário. O arado de disco mais a gradagem niveladora tiveram desempenho satisfatório, atingindo até 0,20m de profundidade. A gradagem superpesada proporcionou maior uniformidade e profundidade de incorporação, com neutralização da acidez do solo até 0,30m de profundidade.

Molecular analysis of the bacterial diversity in a specialized consortium for diesel oil degradation

Diesel oil is a compound derived from petroleum, consisting primarily of hydrocarbons. Poor conditions in transportation and storage of this product can contribute significantly to accidental spills causing serious ecological problems in soil and water and affecting the diversity of the microbial environment. The cloning and sequencing of the 16S rRNA gene is one of the molecular techniques that allows estimation and comparison of the microbial diversity in different environmental samples. The aim of this work was to estimate the diversity of microorganisms from the Bacteria domain in a consortium specialized in diesel oil degradation through partial sequencing of the 16S rRNA gene. After the extraction of DNA metagenomics, the material was amplified by PCR reaction using specific oligonucleotide primers for the 16S rRNA gene. The PCR products were cloned into a pGEM-T-Easy vector (Promega), and Escherichia coli was used as the host cell for recombinant DNAs. The partial clone sequencing was obtained using universal oligonucleotide primers from the vector. The genetic library obtained generated 431 clones. All the sequenced clones presented similarity to phylum Proteobacteria, with Gammaproteobacteria the most present group (49.8 % of the clones), followed by Alphaproteobacteira (44.8 %) and Betaproteobacteria (5.4 %). The Pseudomonas genus was the most abundant in the metagenomic library, followed by the Parvibaculum and the Sphingobium genus, respectively. After partial sequencing of the 16S rRNA, the diversity of the bacterial consortium was estimated using DOTUR software. When comparing these sequences to the database from the National Center for Biotechnology Information (NCBI), a strong correlation was found between the data generated by the software used and the data deposited in NCBI.

Amplification of 16S rRNA gene sequences to differentiate two highly related bradyrhizobia species

A 16S rRNA gene PCR-based assay was developed aiming at a fast molecular diagnostic method to differentiate the two phylogenetically closely related species Bradyrhizobium japonicum and B. elkanii, isolated from soybean nodules, in order to identify those more competitive and comprising greater nitrogen fixation ability for use in the formulation of commercial inoculants. The assay used was able to discriminate ten reference strains belonging to these two Bradyrhizobium species, as well as to efficiently identify 37 strains isolated from fields cultivated with soybean.

Zinc adsorption in highly weathered soils

The objective of this work was to assess the effects of pH and ionic strength upon zinc adsorption, in three highly weathered variable charge soils. Adsorption isotherms were elaborated from batch adsorption experiments, with increasing Zn concentrations (0-80 mg L-1), and adsorption envelopes were constructed through soil samples reactions with 0.01, 0.1 and 1 mol L-1 Ca(NO3)2 solutions containing 5 mg L-1 of Zn, with an increasing pH value from 3 to 8. Driving force of reaction was quantified by Gibbs free energy and separation factor. Isotherms were C-, H- and L-type and experimental results were fitted to nonlinear Langmuir model. Maximum adsorption ranged from 59-810 mg kg-1, and Zn affinity was greater in subsoil (0.13-0.81 L kg-1) than in the topsoil samples (0.01-0.34 L kg-1). Zinc adsorption was favorable and spontaneous, and showed sharply increase (20-90%) in the 4-6 pH range. No effect of ionic strength was observed at pH values below 5, because specific adsorption mechanisms predominated in the 3-5 pH range. Above pH 5, and in subsoil samples, Zn was adsorbed by electrostatic mechanisms, since ionic strength effect was observed. Despite depth and ionic strength effects, Zn adsorption depends mainly on the pH.

Pressão de insuflagem dos pneus no desempenho do conjunto trator-grade de discos

O objetivo deste trabalho foi avaliar o efeito da pressão de insuflagem dos pneus nos parâmetros de desempenho do conjunto trator-grade de discos. As pressões avaliadas foram: 100 kPa nos pneus da frente e 70 kPa nos pneus atrás; 140 kPa nos quatro pneus; 190 kPa nos quatro pneus. Os testes de um trator com grades de discos foram desenvolvidos em condições de campo, em solos de textura franca, mobilizados e secos. Os parâmetros de avaliação foram: o patinamento, a velocidade, a capacidade de trabalho, a eficiência energética global e o consumo de combustível por hectare. Entre as situações de pressão de insuflagem dos pneus indicadas pelo fabricante do trator e a pressão de insuflagem indicada pelo fabricante dos pneus, não se verificam diferenças significativas, tanto na capacidade de trabalho como no consumo de combustível por hectare. A utilização de elevadas pressões de insuflagem dos pneus conduz a uma redução da ordem de 3 a 5% na capacidade de trabalho e um aumento significativo entre 10 e 25% do consumo de combustível por hectare, mesmo em condições de boa aderência dos pneus, refletidas no intervalo de 7 a 15% de patinamento registrados.

Highly selective transport of mercury(II) ion through a bulk liquid membrane

In this work carrier-facilitated transport of mercury(II) against its concentration gradient from aqueous 0.04 M hydrochloric acid solution across a liquid membrane containing isopropyl 2-[(isopropoxycarbothiolyl)disulfanyl]ethane thioate (IIDE) as the mobile carrier in chloroform has been investigated. Sodium thiocyanate solution (1.6 M) was the most efficient receiving phase agent among several aqueous reagents tested. Various parameters such as investigated. Under optimum conditions the transport of Hg(II) across the liquid membrane is more than 97% after 2.5 h. The carrier, IIDE, selectively and efficiently could able to transport Hg (II) ions in the presence of other associated metal ions in binary systems.

Cobalt electrodeposition onto highly oriented pyrolytic graphite (HOPG) electrode from ammonium sulfate solutions

It was carried out an electrochemical study of the cobalt electrodeposition onto HOPG electrode from an aqueous solution containing 10-2 M of CoSO4 + 1M (NH4)2SO4. Nucleation parameters such as nucleation rate, density of active nucleation sites, saturation nucleus and the rate constant of the proton reduction reaction (kPR) were determined from potentiostatic studies. An increase in kPR values with the decrease in the applied potential suggested a competition between H+ and Co2+ by the active sites on the surface. The ΔG energy calculated for the formation of stable nucleus was 8.21x10-21 J/nuclei. The AFM study indicated the formation of small clusters of 50-400 nm in diameter and 2-120 nm in height.

Copper electrodeposition on glassy carbon and highly oriented pyrolytic graphite substrates from perchlorate solutions

In present work, we analyzed the copper electrodeposition onto GCE (System I) and HOPGE (System II) from perchlorate solutions. The current density transients obtained from system I and II were well described through a kinetic mechanism that involves four different contributions: (a) a Langmuir type adsorption process, b) an electron transfer from Cu2+→Cu+, (c) a 3D nucleation limited by a mass transfer reaction and (d) a proton reduction process. It was observed that the values of the nucleation rate, the number of active nucleation sites were increased with the overpotential and they are bigger onto GCE in comparison with HOPGE.

Highly improved chromium (III) uptake capacity in modified sugarcane bagasse using different chemical treatments

The present paper focuses on improving chromium (III) uptake capacity of sugarcane bagasse through its chemical modification with citric acid and/or sodium hydroxide. The chemical modifications were confirmed by infrared spectroscopy, with an evident peak observed at 1730 cm-1, attributed to carbonyl groups. Equilibrium was reached after 24 h, and the kinetics followed the pseudo-second-order model. The highest chromium (III) maximum adsorption capacity (MAC) value was found when using sugarcane bagasse modified with sodium hydroxide and citric acid (58.00 mg g-1) giving a MAC value about three times greater (20.34 mg g-1) than for raw sugarcane bagasse.

Química Sem Fronteiras: o desafio da energia

Coal, natural gas and petroleum-based liquid fuels are still the most widely used energy sources in modern society. The current scenario contrasts with the foreseen shortage of petroleum that was spread out in the beginning of the XXI century, when the concept of "energy security" emerged as an urgent agenda to ensure a good balance between energy supply and demand. Much beyond protecting refineries and oil ducts from terrorist attacks, these issues soon developed to a portfolio of measures related to process sustainability, involving at least three fundamental dimensions: (a) the need for technological breakthroughs to improve energy production worldwide; (b) the improvement of energy efficiency in all sectors of modern society; and (c) the increase of the social perception that education is a key-word towards a better use of our energy resources. Together with these technological, economic or social issues, "energy security" is also strongly influenced by environmental issues involving greenhouse gas emissions, loss of biodiversity in environmentally sensitive areas, pollution and poor solid waste management. For these and other reasons, the implementation of more sustainable practices in our currently available industrial facilities and the search for alternative energy sources that could partly replace the fossil fuels became a major priority throughout the world. Regarding fossil fuels, the main technological bottlenecks are related to the exploitation of less accessible petroleum resources such as those in the pre-salt layer, ranging from the proper characterization of these deep-water oil reservoirs, the development of lighter and more efficient equipment for both exploration and exploitation, the optimization of the drilling techniques, the achievement of further improvements in production yields and the establishment of specialized training programs for the technical staff. The production of natural gas from shale is also emerging in several countries but its production in large scale has several problems ranging from the unavoidable environmental impact of shale mining as well as to the bad consequences of its large scale exploitation in the past. The large scale use of coal has similar environmental problems, which are aggravated by difficulties in its proper characterization. Also, the mitigation of harmful gases and particulate matter that are released as a result of combustion is still depending on the development of new gas cleaning technologies including more efficient catalysts to improve its emission profile. On the other hand, biofuels are still struggling to fulfill their role in reducing our high dependence on fossil fuels. Fatty acid alkyl esters (biodiesel) from vegetable oils and ethanol from cane sucrose and corn starch are mature technologies whose market share is partially limited by the availability of their raw materials. For this reason, there has been a great effort to develop "second-generation" technologies to produce methanol, ethanol, butanol, biodiesel, biogas (methane), bio-oils, syngas and synthetic fuels from lower grade renewable feedstocks such as lignocellulosic materials whose consumption would not interfere with the rather sensitive issues of food security. Advanced fermentation processes are envisaged as "third generation" technologies and these are primarily linked to the use of algae feedstocks as well as other organisms that could produce biofuels or simply provide microbial biomass for the processes listed above. Due to the complexity and cost of their production chain, "third generation" technologies usually aim at high value added biofuels such as biojet fuel, biohydrogen and hydrocarbons with a fuel performance similar to diesel or gasoline, situations in which the use of genetically modified organisms is usually required. In general, the main challenges in this field could be summarized as follows: (a) the need for prospecting alternative sources of biomass that are not linked to the food chain; (b) the intensive use of green chemistry principles in our current industrial activities; (c) the development of mature technologies for the production of second and third generation biofuels; (d) the development of safe bioprocesses that are based on environmentally benign microorganisms; (e) the scale-up of potential technologies to a suitable demonstration scale; and (f) the full understanding of the technological and environmental implications of the food vs. fuel debate. On the basis of these, the main objective of this article is to stimulate the discussion and help the decision making regarding "energy security" issues and their challenges for modern society, in such a way to encourage the participation of the Brazilian Chemistry community in the design of a road map for a safer, sustainable and prosper future for our nation.

Simple, mild, and highly efficient synthesis of 2-substituted benzimidazoles and bis-benzimidazoles

A new convenient method for preparation of 2-substituted benzimidazoles and bis-benzimidazoles is presented. In this method, o-phenylenediamines were condensed with bisulfite adducts of various aldehydes and di-aldehydes under neat conditions by microwave heating. The results were also compared with results of synthesis by conventional heating under reflux. Structures of the products were confirmed by infrared, ¹H- and 13C-NMR spectroscopy. Short reaction times, good yields, easy purification of products, and mild reaction conditions are the main advantages of this method.