The evolution of universities' relations with the business sector in Brazil: What national publications between 1980 and 2012 reveal

ABSTRACT This paper addresses the changes in university-industry relations in Brazil regarding innovation activities. It is based on a survey of articles published in major national journals or presented at the most relevant Brazilian and regional conferences, between 1980 and 2012. The year 1980 was chosen due to the creation of the Technological Innovation Offices (NITs), which was the first government initiative to encourage knowledge transfer from universities to companies; the second was the Innovation Act of 2004. Our assumption was that after the Act the number of academic papers on this subject would increase, bringing new ideas and propositions of models to enhance this relationship. The methodology employed a qualitative, exploratory approach, using bibliographical research and a bibliometric analysis of 247 papers. Literature review of international studies shows the discussion of problems and suggestions for improvements, while in Brazil there is still a debate on whether this collaboration should occur, and if this is a legitimate role for the university. Despite the numerical growth, the content analysis showed few papers on new configurations and procedures for partnership management. We conclude that university-industry relations are not a regular and totally accepted process in Brazilian public universities, which reflect an ideological bias against cooperation with firms.

BETWEEN DREAMS AND REALITY: Migration of Brazilian women to Switzerland

The general objective of this article was to study the process of illegal migration of Brazilian women to Switzerland and, more specifically, to analyze the motivations for migration, the difficulties found upon arrival, the circumstances that led them to get married and lastly an evaluation of the whole experience. The methodology was based in a qualitative approach. The participants were eight Brazilian women that illegally migrated to Switzerland but now are married with Swiss or European men. They responded to an interview focused in the objectives of the study. The appreciation of the data was realized with Minayo´s Content Analysis. The motivations were related to a bettering of the financial situation. In the difficulties encountered, we can bring out illegality, language and prejudice. Regarding marriage, they married to stay legally in the country. Finally, the evaluation of the experience was negative for most participants.

Morphological and physiological variation between queens and workers of Protonectarina sylveirae (de Saussure) (Hymenoptera, Vespidae, Epiponini)

Morphological and physiological variation between queens and workers of Protonectarina sylveirae (de Saussure) (Hymenoptera, Vespidae, Epiponini). The Neotropical swarm-founding wasps, Epiponini, range from the absence of morphological differentiation between castes to highly distinct castes. We measured eight body parts of females of two colonies of Protonectarina sylveirae (de Saussure, 1854). ANOVA and Discriminant Analysis evidenced significant differences between castes, as previously observed by other authors for other species of Epiponini. However, some females previously categorized as queens, were actually workers, supported by our statistic analyses. These individuals showed intermediate morphological features between queens and workers, having distinct patterns of hairs and clypeal spots. The castes of P. sylveirae are distinct, however intermediate individuals may be found in colonies promoting social flexibility.

Spatial and linear correlations between soil and corn

The Technologies setting at Agricultural production system have the main characteristics the vertical productivity, reduced costs, soil physical, chemical and biological improvement to promote production sustainable growth. Thus, the study aimed to determine the variability and the linear and special correlations between the plant and soil attributes in order to select and indicate good representation of soil physical quality for forage productivity. In the growing season of 2006, on the Fazenda Bonança in Pereira Barreto (SP), the productivity of autumn corn forage (FDM) in an irrigated no-tillage system and the soil physical properties were analyzed. The purpose was to study the variability and the linear and spatial correlations between the plant and soil properties, to select an indicator of soil physical quality related to corn forage yield. A geostatistical grid was installed to collect soil and plant data, with 125 sampling points in an area of 2,500 m². The results show that the studied properties did not vary randomly and that data variability was low to very high, with well-defined spatial patterns, ranging from 7.8 to 38.0 m. On the other hand, the linear correlation between the plant and the soil properties was low and highly significant. The pairs forage dry matter versus microporosity and stem diameter versus bulk density were best correlated in the 0-0.10 m layer, while the other pairs - forage dry matter versus macro - and total porosity - were inversely correlated in the same layer. However, from the spatial point of view, there was a high inverse correlation between forage dry matter with microporosity, so that microporosity in the 0-0.10 m layer can be considered a good indicator of soil physical quality, with a view to corn forage yield.

Multivariate analysis applied to the study of the relationship between soil and plant properties in a peach orchard

In the State of Rio Grande do Sul, the municipality of Pelotas is responsible for 90 % of peach production due to its suitable climate and soil conditions. However, there is the need for new studies that aim at improved fruit quality and increased yield. The aim of this study was to evaluate the relationship that exists between soil physical properties and properties in the peach plant in the years 2010 and 2011 by the technique of multivariate canonical correlation. The experiment was conducted in a peach orchard located in the municipality of Morro Redondo, RS, Brazil, where an experimental grid of 101 plants was established. In a trench dug beside each one of the 101 plants, soil samples were collected to determine silt, clay, and sand contents, soil density, total porosity, macroporosity, microporosity, and volumetric water content in the 0.00-0.10 and 0.10-0.20 m layers, as well as the depth of the A horizon. In each plant and in each year, the following properties were assessed: trunk diameter, fruit size and number of fruits per plant, average weight of the fruit per plant, fruit pulp firmness, Brix content, and yield from the orchard. Exploratory analysis of the data was undertaken by descriptive statistics, and the relationships between the physical properties of the soil and of the plant were assessed by canonical correlation analysis. The results showed that the clay and microporosity variables were those that exhibited the highest coefficients of canonical cross-loading with the plant properties in the soil layers assessed, and that the variable of mean weight of the fruit per plant was that which had the highest coefficients of canonical loading within the plant group for the two years assessed.

Boundary between Soil and Saprolite in Alisols in the South of Brazil

Despite numerous studies conducted on the lower limit of soil and its contact with saprolite layers, a great deal of work is left to standardize identification and annotation of these variables in the field. In shallow soils, the appropriately noting these limits or contacts is essential for determining their behavior and potential use. The aims of this study were to identify and define the field contact and/or transition zone between soil and saprolite in profiles of an Alisol derived from fine sandstone and siltstone/claystone in subtropical southern Brazil and to subsequently validate the field observations through a multivariate analysis of laboratory analytical data. In the six Alisol profiles evaluated, the sequence of horizons found was A, Bt, C, and Cr, where C was considered part of the soil due to its pedogenetic structure, and Cr was considered saprolite due to its rock structure. The morphological properties that were determined in the field and that were different between the B and C horizons and the Cr layer were color, structure, texture, and fragments of saprolite. According to the test of means, the properties that support the inclusion of the C horizon as part of the soil are sand, clay, water-dispersible clay, silt/clay ratio, macroporosity, total porosity, resistance to penetration, cation exchange capacity, Fe extracted by DCB, Al, H+Al, and cation exchange capacity of clay. The properties that support the C horizon as a transition zone are silt, Ca, total organic C, and Fe extracted by ammonium oxalate. Discriminant analysis indicated differences among the three horizons evaluated.

Earthworm assemblages in an ecotone between forest and arable field and their relations with soil properties

The objective of this work was to assess the effects of a forest-field ecotone on earthworm assemblages. Five sites (blocks) differing in the type of crop rotation used in the field were studied in Central Bohemia, Czech Republic. In each block, sampling was carried out in seven parallel rows perpendicular to a transect from a forest (oak or oak-pine) to the centre of a field, both in spring and autumn 2001-2003. Individual rows were located in the forest (5 m from the edge), in the forest edge, and in the field (at 5, 10, 25, 50 and 100 m distances from the forest edge). The density and biomass of earthworms were lowest in the forest, increased markedly in the forest edge, decreased again at 5 or 10 m distance from the forest edge and then continuously increased along the distance to the field boundary. The highest number of species was found in the forest edge and in the field boundary. Individual species differed in their distribution along the transect. Both density and biomass of earthworms were correlated with distance from forest edge, soil organic matter content, soil porosity, and water infiltration rate.

Outcrossing rate between 'Haden' and 'Tommy Atkins' mangoes estimated using microsatellite and AFLP markers

The objective of this work was to estimate outcrossing rates between Haden and Tommy Atkins mango cultivars, using AFLP and microsatellite markers. Progenies of an isolated 'Haden' plant, identified in a 'Tommy Atkins' commercial orchard, in Petrolina, PE, Brazil, were analyzed. Total DNA was isolated from the progeny leaves and used for AFLP and microsatellite reactions. Multilocus outcrossing rates (t m) were estimated by direct count of AFLP or microsatellite markers and by the mLTR software. Outcrossing rates ranged from 0.85 to 0.87 with the analysis based on seven AFLP markers, and from 0.83 to 0.91 based on three microsatellite primers. No unexpected band patterns were observed for 'Haden' and 'Tommy Atkins'. The estimates obtained with the mLTR software were close to those obtained by direct AFLP and microsatellite allele counting, which indicates that the multilocus model was appropriate for this kind of study. The microsatellites mMiCIR005, mMiCIR030, and mMiCIR036 can be used to elucidate the origin of 'Haden' and 'Tommy Atkins' seedlings.

Susceptibility weighted imaging: differentiating between calcification and hemosiderin

Objective:To present a detailed explanation on the processing of magnetic susceptibility weighted imaging (SWI), demonstrating the effects of echo time and sensitive mask on the differentiation between calcification and hemosiderin.Materials and Methods:Computed tomography and magnetic resonance (magnitude and phase) images of six patients (age range 41– 54 years; four men) were retrospectively selected. The SWI images processing was performed using the Matlab’s own routine.Results:Four out of the six patients showed calcifications at computed tomography images and their SWI images demonstrated hyperintense signal at the calcification regions. The other patients did not show any calcifications at computed tomography, and SWI revealed the presence of hemosiderin deposits with hypointense signal.Conclusion:The selection of echo time and of the mask may change all the information on SWI images, and compromise the diagnostic reliability. Amongst the possible masks, the authors highlight that the sigmoid mask allows for contrasting calcifications and hemosiderin on a single SWI image.

Balloon-based adjuvant radiotherapy in breast cancer: comparison between 99mTc and HDR 192Ir

Abstract Objective: To perform a comparative dosimetric analysis, based on computer simulations, of temporary balloon implants with 99mTc and balloon brachytherapy with high-dose-rate (HDR) 192Ir, as boosts to radiotherapy. We hypothesized that the two techniques would produce equivalent doses under pre-established conditions of activity and exposure time. Materials and Methods: Simulations of implants with 99mTc-filled and HDR 192Ir-filled balloons were performed with the Siscodes/MCNP5, modeling in voxels a magnetic resonance imaging set related to a young female. Spatial dose rate distributions were determined. In the dosimetric analysis of the protocols, the exposure time and the level of activity required were specified. Results: The 99mTc balloon presented a weighted dose rate in the tumor bed of 0.428 cGy.h-1.mCi-1 and 0.190 cGyh-1.mCi-1 at the balloon surface and at 8-10 mm from the surface, respectively, compared with 0.499 and 0.150 cGyh-1.mCi-1, respectively, for the HDR 192Ir balloon. An exposure time of 24 hours was required for the 99mTc balloon to produce a boost of 10.14 Gy with 1.0 Ci, whereas only 24 minutes with 10.0 Ci segments were required for the HDR 192Ir balloon to produce a boost of 5.14 Gy at the same reference point, or 10.28 Gy in two 24-minutes fractions. Conclusion: Temporary 99mTc balloon implantation is an attractive option for adjuvant radiotherapy in breast cancer, because of its availability, economic viability, and similar dosimetry in comparison with the use of HDR 192Ir balloon implantation, which is the current standard in clinical practice.

A structural bridge between alternant and non-alternant hydrocarbons

A simple set of trimethylene-substituted even, fully-pi-bonded, non-alternant monocycles is shown to have several key features in common with acyclic, even alternant polyenes at the Hückel level. These non-alternant molecules provide a bridge between alternant and non-alternant hydrocarbons. This topic might serve as a useful addition to Hückel theory courses targeted at senior undergraduate students.

Synergism between dipyridamole and cisplatin in human breast cancer cells in vitro

Cisplatin is very effective in the treatment of metastatic breast cancer. However, the development of cellular resistance is a serious problem in cisplatin chemotherapy. In the present work, the effects of dipyridamole (DPM) on the cellular accumulation and cytotoxicity of cisplatin was studied in cisplatinsensitive (MDA/S) and cisplatinresistant (MDA/R) human breast cancer cells. In the presence of 30 µM DPM, the IC50 of cisplatin was reduced by 39% for both cell lines. Combination index analysis revealed that cisplatin and dipyridamole interact synergistically in MDA/R cells. In the MDA/S cells, the cellular accumulation of cisplatin increased by 57 ± 8% in the presence of 30 µM DPM. In the MDA/R cells, the cellular accumulation of cisplatin remained the same with or without 30 µM DPM. The results suggest that the enhancement of cisplatin cytotoxicity by DPM in MDA/S cells may be related to a DPM-induced increase in cisplatin accumulation, but the enhanced cytotoxicity in MDA/R cells employs a mechanism that does not involve an increase in the cellular accumulation of cisplatin.

Myoglobins: the link between discoloration and lipid oxidation in muscle and meat

Aerobic metabolism changes rapidly to glycolysis post-mortem resulting in a pH-decrease during the transformation of muscle in to meat affecting ligand binding and redox potential of the heme iron in myoglobin, the meat pigment. The "inorganic chemistry" of meat involves (i) redox-cycling between iron(II), iron(III), and iron(IV)/protein radicals; (ii) ligand exchange processes; and (iii) spin-equilibra with a change in coordination number for the heme iron. In addition to the function of myoglobin for oxygen storage, new physiological roles of myoglobin are currently being discovered, which notably find close parallels in the processes in fresh meat and nitrite-cured meat products. Myoglobin may be characterized as a bioreactor for small molecules like O2, NO, CO, CO2, H2O, and HNO with importance in bio-regulation and in protection against oxidative stress in vivo otherwise affecting lipids in membranes. Many of these processes may be recognised as colour changes in fresh meat and cured meat products under different atmospheric conditions, and could also be instructive for teaching purposes.

The interaction between sulfathiazole and cobalt(II): potentiometric studies

Potentiometric studies of sulfathiazole (HST) in the presence and absence of cobalt(II) were performed. Equilibrium constants for the formation of the detected species, [Co(ST)]+ and [Co(ST)(OH)], are reported. UV-Vis spectrophotometric measurements suggest that the coordination Co(II)-sulfathiazole might be through a N atom, which, in agreement with MO calculations, could be a thiazolic one. In spite of sulfonamides being better ligands at pH >7, [Co(ST)]+ was found at pH » 3.

Influence of basic properties of Mg,Al-mixed oxides on their catalytic activity in knoevenagel condensation between benzaldehyde and phenylsulfonylacetonitrile

The catalytic performance of Mg,Al-mixed oxides (MO20, MO25 and MO33) derived from hydrotalcites was evaluated in the Knoevenagel reaction between benzaldehyde and phenylsulfonylacetonitrile at 373 and 383 K. The best results were obtained for the sample MO20 that presented the highest basic sites density and external area and the smallest crystallite sizes. The relative amount of basic sites with weak to intermediate strength also played an important role on catalytic performance. By increasing the catalyst content from 1 to 5 wt.% at 383 K, a complete conversion of the reactants is attained, producing α-phenylsulfonylcinnamonitrile with a selectivity of 100%.