Fluorescência e teores de clorofilas em abacaxizeiro cv. pérola submetido a diferentes concentrações de sulfato de amônio

O presente trabalho teve como objetivo a análise da emissão da fluorescência da clorofila a e dos teores de clorofilas em plantas de Ananas comosus (L. Merril) cv pérola, cultivadas em casa de vegetação, submetidas a quatro concentrações de nitrogênio por adição ou não de sulfato de amônio, de acordo com os seguintes tratamentos: Tº= 0 T1/2 = 15; T1 = 30; e T2 = 60 mg/kg solo. As determinações de fluorescência mínima (F0), máxima (Fm), variável (Fv), terminal (Ft) e da eficiência fotoquímica máxima (Fv/Fm) de folhas adaptadas ao escuro foram realizadas ao longo do dia, aos cinco dias após a segunda aplicação de sulfato de amônio, efetuada 120 dias após o transplantio. A adição de sulfato de amônio afetou a fluorescência variável e a máxima, mas não afetou a fluorescência mínima, a terminal nem a eficiência fotoquímica. Houve diferenças significativas entre os valores das variáveis da fluorescência ao longo do dia em que foram feitas as leituras. Houve diferenças nos teores de clorofilas foliares, em função das concentrações de sulfato de amônio aplicadas, com aumento para clorofila a e para a relação clorofila a/b, mas não para clorofila b.

Caracterização de uma blindagem de chumbo protetora de mamas para redução de dose em exames de tomografia computadorizada

Objetivo:Diversos estudos foram publicados quanto ao uso de blindagens de bismuto para proteção de mamas em exames de tomografia computadorizada (TC), e até a redação deste artigo encontrou-se apenas uma publicação sobre blindagens de bário. O objetivo deste estudo foi caracterizar, pela primeira vez, uma manta plumbífera para proteção de mamas.Materiais e Métodos:Foram avaliadas a redução percentual da dose e a influência desta blindagem em parâmetros quantitativos da imagem. Medidas de dose foram feitas em um equipamento de TC com auxílio de fantomas específicos e detectores de radiação. Um software de processamento auxiliou na análise qualitativa, que consistiu em avaliar a variação no número médio de TC e do ruído nas imagens.Resultados:Uma redução de dose na entrada em até 30% e do CTDIvol em até 17% foi encontrada. Como previsto na literatura, a presença do algodão como objeto espaçador reduziu significativamente os artefatos presentes na imagem. Em todas as medidas realizadas foi constatado aumento do número médio de TC e do ruído das imagens na presença da manta.Conclusão:Como esperado, os dados encontrados para a blindagem com chumbo foram da mesma ordem daqueles encontrados na literatura para blindagem com bismuto.

Potencialidades do dióxido de chumbo eletrodepositado como sensor potenciométrico

This paper proposes an experiment to be performed in both instrumental analysis and experimental physical-chemistry curricular disciplines in order to open options to develop challenging basic research activities. Thus the experimental procedures and the results obtained in the preparation of electrodeposited lead dioxide onto graphite and its evaluation as potentiometric sensor for H3O+ and Pb2+ ions, are presented. The data obtained in acid-base titrations were compared with those of the traditional combination glass electrode at the same conditions. Although a linear sub-Nernstian response to free hydrogen ions was observed for the electrodeposited PbO2 electrode, a good agreement was obtained between them. Working as lead(II) sensing electrode, the PbO2 showed a linear sub-Nernstian behavior at total Pb2+ concentrations ranging from 3,5 x 10-4 to 3,0 x 10-2 mol/L in nitrate media. For the redox couple PbO2/Pb(II) the operational slope converges to the theoretical one, as the acidity of the working solution increases.

Eletrodissolução de ligas de latão empregando sistemas de análise em fluxo para a determinação de cobre, zinco e chumbo por ICP-AES

An on-line electrodissolution procedure implemented in a flow injection system for determination of copper, zinc and lead in brasses alloys by ICP-AES is described. Sample dissolution procedure was carried out by using a PTFE chamber and a DC power supply with constant current. Solid sample was attached to chamber as anode and a gold tubing coupled in the chamber was used as cathode. An electrolytic solution flowing through the gold tubing closed the electric circuit with sample, in order to provide condition for electric dissolution when the DC power supply was switched on. The best results were achieved by using a 1.5 mol l-1 nitric acid solution as electrolyte and a 2.5 A current intensity. The procedure presented a good performance characterized by a relative standard deviation better than < 5% (n=5) and a sample throughput of 180 determinations per hour for Cu, Zn and Pb. Results were in agreement with those obtained by conventional acid dissolution (99% confidence level).

Avaliação da fitodisponibilidade de cádmio, chumbo e crômio, em soja cultivada em latossolo vermelho escuro tratado com fertilizantes comerciais

The aim of this work was to evaluate the availability of the toxic heavy metals: cadmium, lead and chromium, in soybean, from some fertilizers. Five fertilizers and soluble salts contend Cd, Pb and Cr were used. All the treatments were accomplished in vases of 2,5 L with application of two doses, 50 and 100 kg.ha-1 for the fertilizers and 25 and 50 kg.ha-1 for the salts.

Especiação de cobre e chumbo em sedimento do Rio Tubarão (SC) pelo método Tessier

The sequential extraction procedure proposed by Tessier and total digestion were applied for the analysis of sediment samples from Tubarão River. The recoveries were between 93.5 and 102.5% for Cu and 99.2 and 111% for Pb. The precision was tipically better than 6% for Cu and 3% for Pb. Comparison of the values obtained for the total digest with the sum of the extracted fractions showed that there were no significant losses in the extraction steps so that the method can be used for the monitoring availability and mobility of these analytes. According to ten points of sampling, was possible to determined the average of labiles phases (fractions 1 and 4) for Pb and Cu: 33.70% and 18.18%, respectively; and the inert phases (fraction 5- residual): 66.30% for Pb and 81.82% for Cu.

Influência da geometria da plataforma na determinação de chumbo em zidovudina (AZT) por ET AAS

The aim of this work was to compare the performances of the L'vov and integrated platforms in order to overcome the interferences found on lead determination in zidovudine by ET AAS. Pyrolysis and atomization temperatures found with integrated platform were 700 and 1400°C, respectively. The characteristic masses were 12.7 ± 1.2 pg with integrated platform and 11.1 ± 1.3 pg with grooved platform. The ratio between the slopes of zidovudine and aqueous curves shows a decrease in the interferences when the L'vov platform is used (bAZT/b aq = 0.97 ± 0.10) and the detection limit found was 0.03 µg.g-1. That ratio was 0.85 ± 0.07 with the integrated platform.

Pré-concentração de chumbo e cádmio em um sistema de micro extração líquido-líquido e determinação por espectrometria de absorção atômica com chama

A method for determination of lead and cadmium in aqueous samples using solvent microextraction and dithizone as complexing agent with FAAS was developed. Solvent microextraction parameters were optimized. The effect of foreign ions on the extraction yields was studied. The extraction was carried out until the aqueous to organic phase ratio achieved a 250 fold preconcentration of metals. For preconcentration times of 4 min the 3sigma detection limits, relative standard deviations (n=7) and linear calibration ranges were 1.6 mug L-1, 5.8% and 10.0 -- 80.0 mug L-1 for lead and 11.1 ng L-1, 5.9% and 0.3 -- 3.0 mug L-1 for cadmium, respectively. The solvent microextraction procedure presented here was applied to the determination of lead and cadmium in natural waters.

Avaliação de poluição do ar por chumbo particulado: uma abordagem geoquímica

High lead concentrations up to 5478 mg kg-1 were detected in dry atmospheric precipitations in Rio Grande city and adjacent area. Lead anomalies cover up to 30% of the study area. Lead concentration measurement in dry atmospheric precipitation and suspended particulate matter provides a possibility to detect concentrations above lead threshold in the air. The most impacted areas are fishermen's villages. The most possible source of lead in the air is uncontrolled sub industrial activity of local population

A importância da análise de especiação do chumbo em plasma para a avaliação dos riscos à saúde

Lead absorption is influenced by the species that are formed and the physicochemical characteristics of lead, among others. Lead plasma concentration is < 5% of total blood lead and represents the biologically active fraction able to cross the cell membranes. Health risks mainly depend on a specific metal and its species. Speciation analysis is the analytical activity of identifying and determining different metal species. Chromatographic methods are very useful in the identification of species and the techniques most used to determine metals in biological fluids are ICP OES/MS and AAS. Lead speciation analysis in blood plasma is fundamental for understanding and evaluating the interaction mechanisms between that analyte and its biological targets.

Comportamento da atomização eletrotérmica de ouro, prata, bismuto, cádmio, chumbo e estanho em soluções aquosas e em etanol, a partir de diferentes superfícies atomizadoras

The atomization behavior of Au, Ag, Bi, Cd, Pb, and Sn from pyrolitic graphite coating (L'vov platform) with the use Pd and Mg solutions, and zirconium coated platform with the analytes in nitric acid 0.2% v/v and in ethanol was investigated. In ethanol medium, the sensitivity gain was three-fold for Bi and Cd using Zr as modifier. Without modifier, the ethanol medium is appropriate only for Au and Cd. In nitric acid medium, the Zr coated platform elevates sensitivity at least two-fold for Bi and Cd. The method was applied to the determination of Ag, Au and Bi of certified steel samples, after on-line preconcentration, sorption on a minicolumn filled with C-18 bonded to silica gel and elution with ethanol. The concentrations obtained agreed with the recommended values.

Resinas poliméricas para separação e pré-concentração de chumbo

This article gives an overview of polymer materials used for lead separation and preconcentration. Different kinds of polymer resins, commercial or not, are cited as well as the most used functional groups attached to polymer backbones. The synthesis of these resins and conditions of lead adsorption and elution are remarked. The influence of the porous structure of the polymer on the resines performance is described as well as the use of spacer arms.

Produção de sulfato de amônio duplamente marcado com os isótopos estáveis 15N e 34S

The purpose of this work was the production of ammonium sulfate double labeled with 15N and 34S ((15NH4)2(34)SO4)), employing the ion exchange technique in two different processes. The first one was carried out using Na2(34)SO4 and (15NH4)2SO4 previously enriched. It was possible to obtain about 54g of (15NH4)2(34)SO4 from 70.0g of Na2(34)SO4 and 64.2g of (15NH4)2SO4 . The second method involved the production of H2(34)SO4, by ion exchange, and its subsequent reaction with 15NH3(aq), using a distillation system, to yield 58 g of (15NH4)2(34)SO4 from 43.1 g of H2(34)SO4.