Initial growth of Bauhinia variegata trees under different colored shade nets and light conditions

Bauhinia variegata and B. variegata var. candida, commonly known as orchid trees, are small sized trees widely used for urban forestry and landscaping. Adult plants grow under full sun; in Brazil, however, seedlings are generally cultivated in commercial nurseries under natural half-shading. The objective of this study was to evaluate the influence of different colored shade nets and light conditions on the initial growth of B. variegata and B. variegata var. candida. The influence of six light conditions (red net with 50% shading; blue net with 50% shading; black net with 70% shading; black net with 50% shading; black net with 30% shading; and full sun) on the initial growth of B. variegata and B. variegata var. candida were evaluated along 160 days, and growth relationships were calculated. Seedlings showed more efficiency on the use of photoassimilated compounds when grown under full sun. Such condition is the most appropriate for seedling production of B. variegata and B. variegata var. candida, contradicting what has been performed in practice.

Computational modeling for irrigated agriculture planning. Part I: general description and linear programming

Linear programming models are effective tools to support initial or periodic planning of agricultural enterprises, requiring, however, technical coefficients that can be determined using computer simulation models. This paper, presented in two parts, deals with the development, application and tests of a methodology and of a computational modeling tool to support planning of irrigated agriculture activities. Part I aimed at the development and application, including sensitivity analysis, of a multiyear linear programming model to optimize the financial return and water use, at farm level for Jaíba irrigation scheme, Minas Gerais State, Brazil, using data on crop irrigation requirement and yield, obtained from previous simulation with MCID model. The linear programming model outputted a crop pattern to which a maximum total net present value of R$ 372,723.00 for the four years period, was obtained. Constraints on monthly water availability, labor, land and production were critical in the optimal solution. In relation to the water use optimization, it was verified that an expressive reductions on the irrigation requirements may be achieved by small reductions on the maximum total net present value.

Anaerobic biodigestion of pigs feces in the initial, growing and finishing stages fed with diets formulated with corn or sorghum

The objective of this study was to evaluate the quality and the production of biogas and biofertilizer obtained from biodigester supplied with pig feces in the initial, growing and finishing stages, fed with diets formulated based on corn or sorghum. Twenty bench biodigesters were used with hydraulic retention time of 30 days and daily loads that contained 4 to 6% of total solids (TS) and 3.6 to 5.2% of volatile solids (VS). In the effluent of the biodigesters, mean levels of TS were observed ranging between 1.6 and 2.0% and of VS between 1.2 and 1.6%. The mean reductions of TS were 57.7 to 64.7% and of VS from 61.7 to 69.0%, and there was only difference in the finishing phase, in which the major averages reductions were produced by the biodigesters supplied with feces from animals fed with diets based on corn. In biodigesters supplied with feces from animals in the initial and growing stages fed with diets based on corn, were observed higher average productions of biogas and the greatest average potentials of biogas production. The average potentials obtained were 0.033; 0.181; 0.685; 0.788 and 1.132 m³ per kg of affluent, manure, TS added, VS added and VS reduced, respectively. No differences were found on the average content of methane in the biogas between diets and stages. The average concentrations of nutrients N, P, K, Ca, Mg, Na, Fe, Mn, Zn and Cu in the biodigester affluent and effluent, ranged between diets and stages.

Initial development of two eucalyptus hybrid submitted to irrigation

The eucalyptus offers several advantages compared to other forestry species and, by using the irrigation can increase productivity and decrease production time. The objective of the present study was to evaluate two hybrid eucalyptus (Grancam and Urograndis), no irrigation, dripping and micro sprinkler irrigated at 90, 120, 150 and 180 days after transplanting (DAT). The experiment was conducted at the experimental irrigation area in the State University of Mato Grosso do Sul, in the municipality of Aquidauna - State of MS, Brazil. The experimental design was randomized blocks, split plot with four blocks and two replications within each block, and the plots were composed by irrigation treatments (dripping, micro sprinkler irrigate and dry) and the subplots the hybrids (Grancam and Urograndis).The total area of the experiment had 3 hectares, where each plot consisted of 1 ha. It was evaluated plant height, stem diameter and canopy, stem basal area, the relationship between height and stem diameter, the relationship between height and canopy diameter and stem volume. Data were subjected to analysis of variance and compared by Tukey test at 5% probability. Irrigation systems and dripping sprinkle provide greater plant height, stem diameter, canopy diameter, stem basal area and stem volume.

Implementation of a trauma registry in a brazilian public hospital: the first 1,000 patients

OBJECTIVE: Show the steps of a Trauma Registry (TR) implementation in a Brazilian public hospital and evaluate the initial data from the database.METHODS: Descriptive study of the a TR implementation in João XXIII Hospital (Hospital Foundation of the state of Minas Gerais) and analysis of the initial results of the first 1,000 patients.RESULTS: The project was initiated in 2011 and from January 2013 we began collecting data for the TR. In January 2014 the registration of the first 1000 patients was completed. The greatest difficulties in the TR implementation were obtaining funds to finance the project and the lack of information within the medical records. The variables with the lowest completion percentage on the physiological conditions were: pulse, blood pressure, respiratory rate and Glasgow coma scale. Consequently, the Revised Trauma Score (RTS) could be calculated in only 31% of cases and the TRISS methodology applied to 30.3% of patients. The main epidemiological characteristics showed a predominance of young male victims (84.7%) and the importance of aggression as a cause of injuries in our environment (47.5%), surpassing traffic accidents. The average length of stay was 6 days, and mortality 13.7%.CONCLUSION: Trauma registries are invaluable tools in improving the care of trauma victims. It is necessary to improve the quality of data recorded in medical records. The involvement of public authorities is critical for the successful implementation and maintenance of trauma registries in Brazilian hospitals.

Critical analysis of thoracotomies performed in the emergency room in 10 years

OBJECTIVE: To conduct a critical analysis of thoracotomies performed in the emergency rooms.METHODS: We analyzed mortality rates and survival as outcome variables, mechanism of injury, site of injury and anatomic injury as clinical variables, and gender and age as demographic variables of patients undergoing thoracotomy in the emergency room after traumatic injury.RESULTS: Of the 105 patients, 89.5% were male. The average age was 29.2 years. Penetrating trauma accounted for 81% of cases. The most common mechanism of trauma was wound by a firearm projectile (gunshot), in 64.7% of cases. Patients with stab wounds (SW) accounted for 16.2% of cases. Overall survival was 4.7%. Survival by gunshot was 1.4%, and by SW, 23.5%. The ERT following blunt trauma showed a 100%mortality.CONCLUSION: The results obtained in the Emergency Hospital of Porto Alegre POA-HPS are similar to those reported in the world literature.

Nuss procedure for Pectus excavatum repair: critical appraisal of the evidence

Objective: To evaluate the effectiveness and safety of correction of pectus excavatum by the Nuss technique based on the available scientific evidence.Methods: We conducted an evidence synthesis following systematic processes of search, selection, extraction and critical appraisal. Outcomes were classified by importance and had their quality assessed by the Grading of Recommendations Assessment, Development and Evaluation (GRADE).Results: The process of selection of items led to the inclusion of only one systematic review, which synthesized the results of nine observational studies comparing the Nuss and Ravitch procedures. The evidence found was rated as poor and very poor quality. The Nuss procedure has increased the incidence of hemothorax (RR = 5.15; 95% CI: 1.07; 24.89), pneumothorax (RR = 5.26; 95% CI: 1.55; 17.92) and the need for reintervention (RR = 4.88; 95% CI: 2.41; 9.88) when compared to the Ravitch. There was no statistical difference between the two procedures in outcomes: general complications, blood transfusion, hospital stay and time to ambulation. The Nuss operation was faster than the Ravitch (mean difference [MD] = -69.94 minutes, 95% CI: -139.04, -0.83).Conclusion: In the absence of well-designed prospective studies to clarify the evidence, especially in terms of aesthetics and quality of life, surgical indication should be individualized and the choice of the technique based on patient preference and experience of the team.

Assessment of pelvic floor by three-dimensional-ultrasound in primiparous women according to delivery mode: initial experience from a single reference service in Brazil

PURPOSE: To evaluate changes to the pelvic floor of primiparous women with different delivery modes, using three-dimensional ultrasound. METHODS: A prospective cross-sectional study on 35 primiparae divided into groups according to the delivery mode: elective cesarean delivery (n=10), vaginal delivery (n=16), and forceps delivery (n=9). Three-dimensional ultrasound on the pelvic floor was performed on the second postpartum day with the patient in a resting position. A convex volumetric transducer (RAB4-8L) was used, in contact with the large labia, with the patient in the gynecological position. Biometric measurements of the urogenital hiatus were taken in the axial plane on images in the rendering mode, in order to assess the area, anteroposterior and transverse diameters, average thickness, and avulsion of the levator ani muscle. Differences between groups were evaluated by determining the mean differences and their respective 95% confidence intervals. The proportions of levator ani muscle avulsion were compared between elective cesarean section and vaginal birth using Fisher's exact test. RESULTS: The mean areas of the urogenital hiatus in the cases of vaginal and forceps deliveries were 17.0 and 20.1 cm², respectively, versus 12.4 cm² in the Control Group (elective cesarean). Avulsion of the levator ani muscle was observed in women who underwent vaginal delivery (3/25), however there was no statistically significant difference between cesarean section and vaginal delivery groups (p=0.5). CONCLUSION: Transperineal three-dimensional ultrasound was useful for assessing the pelvic floor of primiparous women, by allowing pelvic morphological changes to be differentiated according to the delivery mode.

Critical aspects on the behavior of material from the mechanical tool-workpiece interaction in single point diamond turning

Some material aspects such as grain size, purity and anisotropy exert an important influence on surface quality, especially in single point diamond turning. The aim of this paper is to present and discuss some critical factors that can limit the accuracy of ultraprecision machining of non-ferrous metals and to identify the effects of them on the cutting mechanism with single point diamond tools. This will be carried out through observations of machined surfaces and chips produced using optical and scanning electron microscopy. Solutions to reduce the influence of some of these limiting factors related with the mechanism of generation of mirror-like surfaces will be discussed.

Buckling analysis of PVC sheets with RIB

This study has a technical and applied character. A PVC structured wall pipe can be produced by spirally winding a ribbed sheet having a male-female lock, chemically welded by an adhesive. These pipes are "flexible" and are used mainly in underground installations, to convey fluids in free duct regime. Initial studies have indicated that the buckling resistance of the ribs from the sheet coiling to the tube manufacturing is the critical design parameter. This study presents the theoretical analytical development in order to obtain the critical buckling moment of these sheets. This analysis uses concepts initially developed to calculate buckling resistance in monosymmetrical profiles that are very used in the metallic structure industry. Since the material used was PVC, that has different mechanical properties than steel and aluminum, it was necessary to consider the differences in the analytical treatment. It is important to emphasize that the results obtained are product of the co-operative work of engineers from industry and university.

Thermalhydraulic behavior of electrically heated rod during a critical heat flux transient

In nuclear reactors, the occurrence of critical heat flux leads to fuel rod overheating with clad fusion and radioactive products leakage. To predict the effects of such phenomenon, experiments are performed using electrically heated rods to simulate operational and accidental conditions of nuclear fuel rods. In the present work, it is performed a theoretical analysis of the drying and rewetting front propagation during a critical heat flux experiment, starting with the application of an electrical power step from steady state condition. After the occurrence of critical heat flux, the drying front propagation is predicted. After a few seconds, a power cut is considered and the rewetting front behavior is analytically observed. Studies performed with various values of coolant mass flow rate show that this variable has more influence on the drying front velocity than on the rewetting one.

Critical period for weed control in potatoes in the Huambo Province (Angola)

The effects of different weed management periods on potatoes were studied in three areas (Bailundo, Chianga and Calenga) of the central highlands of Angola and in three cropping seasons, from June 2005 to May 2007. Six weed-management treatments were used to identify critical periods of competition and to allow the development of more precise management recommendations. Total potato yield ranged from about 22 t ha-1 in weed-free plots to about 3 t ha-1 with no weed control a yield loss of 86%. Major weed species Galinsoga parviflora, Cyperus esculentus, Bidens biternata, Amaranthus hybridus, Nicandra physaloides, Portulaca oleracea and Datura stramonium differed from area to area. The species G. parviflora dominated the weed flora in all three areas 73, 97 and 72 plants m² 50 days after crop emergence in Bailundo, Chianga and Calenga respectively, in dry season trials; while C. esculentus was also present in Chianga and Calenga, with an average density of ca 30 plants m-2 in dry season trials. Gompertz and logistic equations were fitted to data representing increasing periods of weed-free growth and weed interference, respectively. Critical periods for weed control, with a 95% weed-free total yield, were estimated from 26 to 66 and from 20 to 61 days after emergence for the rainy and dry seasons, respectively. Weed competition before or after these critical periods had negligible effects on crop yield.

Sourgrass densities affecting the initial growth and macronutrient content of coffee plants

The objective of this work was to evaluate the coexistence effects of coffee (Coffea arabica) with densities of sourgrass (Digitaria insularis) on crop macronutrient content and plant growth. The experiment was conducted in plots where one coffee plant was maintained in coexistence with 0 (weed-free check), 1, 2, 4, 8, and 16 sourgrass plants, using a completely randomized design with three replicates. Reduction of coffee growth and macronutrient content, except P that increased, started when the coexistence occurred with sourgrass plants in a density of 1 plant per plot. In general, macronutrient content was reduced by 18-50%, while growth characteristics were reduced by 9-41%, when coffee plants coexisted with 16 plants of sourgrass. Thus, sourgrass competition for nutrients was a strong factor limiting coffee plant growth.

Implications of weeds of genus euphorbia for crop production: a review

The genus Euphorbia comprises about 2000 species ranging from annuals to trees, including C3, C4, and CAM species. Euphorbia species widely studied in agriculture includes E. antiquorum, E. carollata, E. dentata, E. dracunculoides, E. esula, E. geniculata, E. granulata, E. helioscopia, E. heterophylla, E. hierosolymitana, E. hirta, E. maculata, E. microphylla, E. nerifolia, E. piluifera, E. pulcherrima, E. royleana, E. supine, and E. thiamifolia. These species have been reported mainly in field crops/vegetables, orchards, pastures, and rangelands. Euphorbia plants may present allelopathic effect over desirable cereals, pulses, oilseeds, vegetables, forage plants, and nitrifying bacteria, posing a serious threat to livestock production on open range lands through the release of allelochemicals from roots, stems, leaves, and inflorescence in the rhizosphere. Leaves are reported to be more toxic than other plant parts. Competition of Euphorbia spp. against crop plants is the most important crop yield-limiting factor. The critical period for Euphorbia competition with crops is reported to take place between 17 to 70 days after emergence for most crops, depending on root development during the initial crop growth stage, crop height, tillering or branching capacity, whether weeds emerge at the same time as the crop or later after crop emergence; how quickly crop canopy develops and also on Euphorbia species. A yield reduction of 4-85% has been reported in field crops with different Euphorbia species and distinct occurrence densities. Euphorbia species decrease herbage production by 10 to 100% in pasture and rangelands, with many acting as natural insecticide, fungicide, nematidicide, immunopotentiator, or immunosuppressor.

Initial growth and competitive ability of yellow nutsedge and irrigated rice

Weeds cause significant reduction in the irrigated rice crop yield. Cyperus esculentus (yellow nutsedge) is adapted to irrigate environment. Information on the competitive ability of the weed to the culture, and their environmental adaptation, are scarce. In this study, we sought to determine the initial growth and competitive ability of yellow nutsedge and irrigated rice, as a function of cultivar growth cycle. Initial growth and competition studies were conducted in a randomized complete design in a greenhouse in the agricultural year 2010/11. For the initial growth study, the treatments consisted of a factorial combination of a biotype of yellow nutsedge and two rice cultivars in the function of the vegetative cycle (BRS Querência: early cycle - IRGA 424: intermediate cycle) and six evaluation times (10, 20, 30, 40, 50, and 60 days after emergence). Were evaluated: plant height, leaf area, aboveground dry biomass and root dry biomass. In the competitive ability study in the replacement series, the cultivar BRS Querência (early cycle) and yellow nutsedge were utilized and tested in different proportions of competition (100:0, 75:25, 50:50, 25:75, and 0:100). Were evaluated leaf area and aboveground dry biomass. In general, rice cultivars have an adaptive value equivalent to yellow nutsedge. IRGA 424 cultivar has less height than weed, becoming the weed control more important in this cultivar. For rice crop, intraspecific competition is more important, whereas for the weed, interspecific competition is the most pronounced.