Constituintes químicos de licania tomentosa Benth. (Chrysobalanaceae)

This paper describes the chemical constituents isolated from leaves and fruits of Licania tomentosa Benth. The plant materials were successively extracted with hexane and methanol. From the extracts the following compounds were obtained: betulinic acid; licanolide, a new triterpene lactone; oleanolic acid, lupeol; palmitoleic and hexadecanoic acid; a mixture of stigmasterol and sitosterol; and a mixture of tormentic, ursolic and betulinic acid. The structures of the natural products were identified on the basis of spectral data.

Constituintes voláteis de própolis piauiense

The essential oils of five samples obtained in different regions of the state of Piaui were analyzed by GC-MS. Ninety-one volatile constituents were tentatively identified and eight were positively identified. The principal components obtained from each sample were: 1,8-cineole, exo-fenchol, terpin-4-ol and fenchone (Teresina), a-pinene, caryophyllene oxide, b-pinene and a-copaene (Pio IX), (E)-caryophyllene, a-copaene, a-pinene, caryophyllene oxide and d-cadinene (Campo Maior), (E)-caryophyllene, a-gurjunene and b-selinene (Pedro II) and (E)-caryophyllene, a-gurjunene, d-cadinene and a-copaene (Lagoa de Sao Francisco). The five samples presented differences in the chemical composition of volatile fractions. The studies pointed out the need of characterizing propolis from Piaui by geographic regions and by seasons (drought and rainy periods).

Influência da temperatura de secagem sobre o rendimento e a composição química do óleo essencial de Tanaecium nocturnum (barb. Rodr.) bur. & K. Shum

The yields and chemical compositions of the essential oils obtained by steam distillation of the fresh and dried (30 and 40 ºC) leaves, stems and roots of Tanaecium nocturnum are reported. The identification and quantification of the volatile constituents were accomplished by GC/MS and GC/FID, respectively. The essential oils obtained from the various parts of the plant were constituted mainly of benzaldehyde. Large losses and variations in the quantities of the components during the drying process were observed. The presence of mandelonitrile in higher concentration in the stem and roots indicates that this species produces cyanogenic glycosides.

Constituintes químicos e atividade antiedematogênica de Peltodon radicans (Lamiaceae)

Most of the snakebite incidents in the Amazon region involve Bothrops atrox, whose venom presents the most potent edematogenic and necrotic activities in the genus. This work describes the studies of isolation of the chemical constituents and antiedematogenic activity of the species Peltodon radicans (Lamiaceae), which is used in the treatment of snakebites and scorpion stings in the region. The extracts presented aliphatic hydrocarbons, 3beta-OH,beta-amirin (1), 3beta-OH,alpha-amirin (2), beta-sitosterol (3), stigmasterol (4), ursolic acid (5), 2alpha,3beta,19alpha-trihydroxy-urs-12-en-28-oic acid (tormentic acid, 6), methyl 3beta-hydroxy,28-methyl-ursolate (7), sitosterol-3-O-beta-D-glucopyranoside (8), and stigmasterol-3-O-beta-D-glucopyranoside (9). The flower extracts presented the higher antiedematogenic activity. This is the first report on the study of the flowers, stem, and roots of this plant.

Composição e atividade antibacteriana dos óleos essenciais de Senecio crassiflorus var. crassiflorus

The essential oils of leaves, aerial and underground stems of Senecio crassiflorus var. crassiflorus were extracted by hydrodistillation and their analyses were performed by GC/MS. Qualitative and quantitative differences have been found between the analyzed parts. The main compounds of the essentials oils of the leaves were found to be oxygenated sesquiterpenes, while the oils from the aerial and underground stems showed sesquiterpene hydrocarbons as major constituents. Furthermore, the essential oils were tested against Staphylocccus aureus, Escherichia coli, Pseudomonas aeruginosa and Bacillus cereus. The essential oil of the leaves was shown to be the most active.

A espectrometria atômica e a determinação de elementos metálicos em material polimérico

Polymeric materials are widely used in the chemical industry and are part of our daily lives. Inorganic species may be added to them as additives, anti-oxidizing agents, stabilizers, plasticizers, colorants and catalysts and may be present in a wide range of concentrations. Their determination demands the development of analytical methods considering different kinds of polymeric materials, their composition and the final use of the material. Although many different analytical techniques may be used, this review emphasizes those based on atomic absorption and emission spectrometry. Solid sampling techniques and digestion methods are described and discussed and compared considering published results.

Constituintes químicos de Vernonia chalybaea mart.

The chemical investigation of the hexane and ethanol extracts from aerial parts of Vernonia chalybaea conducted to the isolation and characterization of a new aliphatic tetrahydroxyl ether, along with a series of known compounds such as 4 α,10 α-epoxyaromadendrane, friedelin, taraxasteryl acetate, pseudotaraxasteryl acetate, lupeyl acetate, lupeol, α-amiryn, β-amiryn, β-sitosterol, stigmasterol, 2,3-dimethyl-1,2,3-tri-hydroxybuthanol, angophorol, angophorol-7-O-glucoside, angophorol-7-O-rutinoside, 3,7-dimethoxy-5,3',4'-trihydroxyflavone and acacetin. The structures of all compounds were determined by spectroscopic analysis and comparison with published spectral data.

Determinação de benzeno, tolueno, etilbenzeno e xilenos em gasolina comercializada nos postos do estado do Piauí

Automotive gasoline consists of a complex mixture of flammable and volatile hydrocarbons derived from crude oil with carbon numbers within the range of 4-12 and boiling points range of 30-225 ºC. Its composition varies with the kind of crude oil and the type of refinery process that they undergone. Aromatics hydrocarbons, in particular benzene, toluene, ethylbenzene and isomeric xylenes (BTEX) are the toxic group constituents presents. GC-FID was employed to quantify these hydrocarbons in 50 commercial gasoline samples from Piauí state. Statistical analysis techniques, such as PCA and HCA were used to analyze the data. Moreover, several validation parameters were evaluated.

Processos físico-químicos em drenagem ácida de mina em mineração de carvão no sul do Brasil

Acid mine drainage generated from coal mine showed a pH of 3.2, high concentrations of SO4(2-), Al, Fe, Mn, Zn and minor As, Cd, Co, Cr, Cu, Ni and Pb. The major reduction in the concentration occurred for Al, As, Cr, Fe and Pb after the treatment with CaO. The evolution of these acid waters within the tributary stream showed decreasing concentration for all soluble constituents, except Al. This natural attenuation was controlled by pH (6.4 to 10.8) as a result of concurrent mixing with tributary stream and reaction with local bedrock that contains limestone. Aluminum increasing concentration during this evolution seems to be related to an input of Al-enriched waters due to the leaching of silicate minerals in alkaline conditions.

Aplicações de fibras lignocelulósicas na química de polímeros e em compósitos

The use of lignocellulosic fibers and their constituents, as raw materials in the production of polymeric and composite materials, represent an exceptional opportunity of sustainable technological development. In the present report works that discuss promising alternatives of obtaining and use of materials such as cellulose, hemicellulose, lignin, cellulose nanocrystals and biocomposites were revised. The advance in the use of biomass can be, in a near future, capable of going beyond the application difficulties of these vast materials, especially in relation to the economical unviability, by the production of high performance polymeric and composite materials. This advance would represent a higher profitability to some areas of agrobusiness, especially the sector of biofuels, which produces elevated amounts of biomass waste.

Variabilidade sazonal e biossíntese de terpenóides presentes no óleo essencial de Lippia alba (Mill.) N. E. Brown (Verbenaceae)

The essential oil of the leaves of Lippia alba chemotype linalool-1,8-cineol was extracted by hidrodistillation at different seasons and analyzed by GC/MS. Qualitative and quantitative variations in regard to the period of harvesting have been performed and the results were correlated with meteorological data. The essential oil yield varied from 0.33 to 0.67%. The chemical diversity of the constituents increased throughout the year, being 1,8-cineol and linalool the major components. Possible biosynthetic routes of mono and sesquiterpenoids present in the essential oil are discussed.

Relevância de compostos de baixa massa molar produzidos por fungos e envolvidos na biodegradação da madeira

Over the last decade, evidences have been shown that the wood biodegradation by fungi is not only a result of the action of their enzymatic machinery but also of various low molecular weight non-enzymatic compounds, especially in fungi that promote brown and white decay, which in nature are the major wood decaying microorganisms. The present review focuses on the recent theories involving these low molecular weight compounds that act direct or synergistically with lignocellulolytic enzymes to attack the wood main macromolecular constituents, their relevance as potential degradative systems, in the overall wood biodegradation, and also outlines their potential biotechnological applications.

Antifungal activity against postharvest fungi by extracts from Colombian propolis

The aims of the present study were to evaluate the antifungal properties of Colombian propolis extracts against Colletotrichum gloeosporioides and Botryodiplodia theobromae, and to isolate and identify the main constituents from the active extracts. Therefore, propolis samples were thoroughly extracted with n-hexane/methanol (EPEM), dichloromethane, ethyl acetate, and methanol. Experimental results indicated that mycelial growth of all selected microorganisms was reduced in culture media containing EPEM and dichloromethane fractions. Furthermore, through antifungal bioassay-guided fractionation, three known labdane-type diterpenes: isocupressic acid (1), (+)-agathadiol (2) and epi-13-torulosol (3) were isolated as the main constituents from the active fractions.

Avaliação do uso de poli(tereftalato de etileno) (PET) como matriz de imobilização de cinzas de incineradores

Industrial hazardous wastes must receive appropriate treatment to ensure a safe disposal to humans and environment. One of the techniques adopted for this purpose is the stabilization/solidification in polymer matrices. This paper evaluated the use of recycled polyethylene terephthalate as an incorporation matrix of incinerator ash. The polymer and the ash were submitted to an extrusion process in different percentages. The final product was evaluated through thermal and leaching tests and the leachate extracts constituents were determinated by atomic absorption spectrophotometry. The results showed a reduction in the release of substances up to 99% by mass for the conditions used.

Determinação direta de Ca, Mg, Mn e Zn em amostras de leite de búfala da Ilha de Marajó por espectrometria de absorção atômica com chama (FAAS)

This work proposes an analytical procedure for direct determination of calcium, magnesium, manganese and zinc in buffalo milk by flame atomic absorption spectrometry (FAAS). Samples were diluted with a solution containing 10% (v/v) of water-soluble tertiary amines (CFA-C) at pH 8. For comparison, buffalo milk samples were digested with HNO3 and H2O2. According to a paired t-test, the results obtained in the determination of Ca, Mg, Mn and Zn in digested samples and in 10% (v/v) CFA-C medium were in agreement at a 95% confidence level. The developed procedure is simple, rapid, decrease the possibility of contamination and can be applied for the routine determination of Ca, Mg, Mn and Zn in buffalo milk samples without any difficulty caused by matrix constituents, such as fat content, and particle size distribution in the milk emulsion.