Soil compaction and eucalyptus growth in response to forwarder traffic intensity and load

During timber exploitation in forest stands harvesting machines pass repeatedly along the same track and can cause soil compaction, which leads to soil erosion and restricted tree root growth. The level of soil compaction depends on the number of passes and weight of the wood load. This paper aimed to evaluate soil compaction and eucalyptus growth as affected by the number of passes and wood load of a forwarder. The study was carried out in Santa Maria de Itabira county, Minas Gerais State - Brazil, on a seven-year-old eucalyptus stand planted on an Oxisol. The trees were felled by chainsaw and manually removed. Plots of 144 m² (four rows 12 m long in a 3 x 2 m spacing) were then marked off for the conduction of two trials. The first tested the traffic intensity of a forwarder which weighed 11,900 kg and carried 12 m³ wood (density of 480 kg m-3) and passed 2, 4, and 8 times along the same track. In the second trial, the forwarder carried loads of 4, 8, and 12 m³ of wood, and the machine was driven four times along the same track. In each plot, the passes affected four rows. Eucalyptus was planted in 30 x 30 x 30 cm holes on the compacted tracks. The soil in the area is clayey (470 clay and 440 g kg-1 sand content) and at depths of 0-5 cm and 5-10 cm, respectively, soil organic carbon was 406 and 272 g kg-1 and the moisture content during the trial 248 and 249 g kg-1. These layers were assessed for soil bulk density and water-stable aggregates. The infiltration rate was measured by a cylinder infiltrometer. After 441 days the measurements were repeated, with additional analyses of: soil organic carbon, total nitrogen, N-NH4+, N-NO3-, porosity, and penetration resistance. Tree height, stem diameter, and stem dry matter were measured. Forwarder traffic increased soil compaction, resistance to penetration and microporosity while it reduced the geometric mean diameter, total porosity, macroporosity and infiltration rate. Stem dry matter yield and tree height were not affected by soil compaction. Two passes of the forwarder were enough to cause the disturbances at the highest levels. The compaction effects were still persistent 441 days after forwarder traffic.

Métodos de concentração de minerais 2:1 secundários na fração argila visando sua identificação por difratometria de raios x

Além dos baixos teores normalmente encontrados na fração argila dos solos sob clima tropical e subtropical, o tamanho reduzido e a baixa cristalinidade dos minerais 2:1 secundários dificultam sua identificação por difratometria de raios X (DRX). Este estudo objetivou avaliar métodos químicos e físico de concentração de minerais 2:1 secundários na fração argila para facilitar a identificação por DRX, incluindo a natureza dos minerais quanto ao local de formação de cargas permanentes (lâmina tetraedral ou octaedral). Coletaram-se amostras de dois Cambissolos originados de argilito da Formação Guabirotuba na Bacia Sedimentar de Curitiba (PR): horizontes A, Bi, C1 (1,2 a 1,5 m), C2 (2,2 a 2,5 m), C3 (3,2 a 3,5 m) e C4 (4,2 a 4,5 m). Após remoção da matéria orgânica e dispersão da terra fina seca ao ar, a fração argila foi submetida a tratamentos sequenciais com ditionito-citratobicarbonato (DCB) (amostra desferrificada - remoção de óxidos de Fe pedogenéticos) e com soluções de NaOH a quente, em diferentes concentrações (0,5; 1,0; 1,5; 2,5; 3,5; 4,0; 4,5 e 5,0 mol L-1), para extração de gibbsita e caulinita, em diferentes graus. A fração argila desferrificada também foi submetida à separação física (centrifugação) em argila grossa (0,2 a 2 m) e fina (< 0,2 m). Foram realizados tratamentos auxiliares para identificar as espécies minerais 2:1 na fração argila: saturação com Mg e solvatação com etilenoglicol; saturação com K e secagem ao ar e aquecimento a 550 ºC; e saturação com Li (teste de Greene-Kelly). Os resultados mostraram que o método clássico de extração da caulinita, com solução de NaOH 5,0 mol L-1 a quente, não deve ser aplicado para concentração de minerais 2:1 secundários, pois também removeu grande parte desses minerais. O tratamento com DCB e com solução de NaOH 3,5 mol L-1 possibilitou, com maior eficiência, a concentração e identificação de minerais 2:1 secundários por DRX nas amostras dos horizontes A, Bi e C1. Nas amostras tomadas em maiores profundidades (horizontes C2, C3 e C4), devido aos maiores teores desses minerais e ao menor tamanho dos cristais (argila fina), a solução menos concentrada de NaOH (1,5 mol L-1) foi mais eficiente para esse propósito. No horizonte A, os minerais 2:1 concentraram-se na fração argila grossa, compatível com o maior grau de intemperismo desse horizonte. Identificou-se esmectita com hidroxi-Al entrecamadas nos horizontes mais superficiais (A e Bi) e esmectita nas amostras do horizonte C. A saturação com Li permitiu a identificação das esmectitas dioctaedrais montmorilonita e beidelita/nontronita. As adaptações ao métodopadrão (NaOH 5 mol L-1) favoreceram a concentração de minerais 2:1 secundários na fração argila dos solos; a concentração da solução de NaOH deve ser maior para horizontes com menor teor do mineral.

Mobility of inorganic and organic phosphorus forms under different levels of phosphate and poultry litter fertilization in soils

The eutrophication of aquifers is strongly linked to the mobility of P in soils. Although P mobility was considered irrelevant in a more distant past, more recent studies have shown that P, both in organic (Po) and inorganic forms (Pi), can be lost by leaching and eluviation through the soil profile, particularly in less weathered and/or sandier soils with low P adsorption capacity. The purpose of this study was to determine losses of P forms by leaching and eluviation from soil columns. Each column consisted of five PVC rings (diameter 5 cm, height 10 cm), filled with two soil types: a clayey Red-Yellow Latosol and a sandy loam Red-Yellow Latosol, which were exposed to water percolation. The soils were previously treated with four P rates (as KH2PO4 ) to reach 0, 12.5, 25.0 and 50 % of the maximum P adsorption capacity (MPAC). The P source was homogenized with the whole soil volume and incubated for 60 days. After this period the soils were placed in the columns; the soil of the top ring was mixed with five poultry litter rates of 0, 20, 40, 80, and 160 t ha-1 (dry weight basis). Treatments consisted of a 4 x 5 x 2 factorial scheme corresponding to four MPAC levels, five poultry litter rates, two soils, with three replications, arranged in a completely randomized block design. Deionized water was percolated through the columns 10 times in 35 days to simulate about 1,200 mm rainfall. In the leachate of each column the inorganic P (reactive P, Pi) and organic P forms (unreactive P, Po) were determined. At the end of the experiment, the columns were disassembled and P was extracted with the extractants Mehlich-1 (HCl 0.05 mol L-1 and H2SO4 0.0125 mol L-1) and Olsen (NaHCO3 0.5 mol L-1; pH 8.5) from the soil of each ring. The Pi and Po fractions were measured by the Olsen extractant. It was found that under higher poultry litter rates the losses of unreactive P (Po) were 6.4 times higher than of reactive P (Pi). Both the previous P fertilization and increasing poultry litter rates caused a vertical movement of P down the soil columns, as verified by P concentrations extracted by Mehlich-1 and NaHCO3 (Olsen). The environmental critical level (ECL), i.e., the P soil concentration above which P leaching increases exponentially, was 100 and 150 mg dm-3 by Mehlich-1 and 40 and 60 mg dm-3 by Olsen, for the sandy loam and clay soils, respectively. In highly weathered soils, where residual P is accumulated by successive crops, P leaching through the profile can be significant, particularly when poultry litter is applied as fertilizer.

NPK fertilization on initial growth of physic nut seedlings in Quartzarenic Neossol

Balanced fertilization is important for plant growth. There is little information on physic nut (Jatropha curcas L.) and tests with the fertilization of the species are very recent. This study evaluated the initial growth of physic nut seedlings in response to NPK rates to Quartzarenic Neossol in a greenhouse and estimated P and K critical soil levels and N, P and K in shoot dry matter after 120 days of evaluation. The treatments were arranged in a randomized, fractional factorial design (4 x 4 x 4)½, totalizing 32 treatments with three replicates, 96 experimental plots and N rates (0, 75, 150 and 300 mg dm-3) as urea; P rates (0, 45, 90 and 180 mg dm-3) as triple superphosphate and K rates (0, 50, 100 and 200 mg dm-3) as potassium chloride. After 120 days, the plants were harvested and some variables evaluated: plant height, stem diameter, shoot and root dry weight, macro and micronutrient levels in plant shoots, and soil chemical properties. The physic nut seedlings responded to NPK fertilizer in the initial growth phase; the response to N was negative. The recommended P and K rates were 25 and 67 mg dm-3, respectively. The critical levels, corresponding to the recommended P rate were 13 and 74 mg dm-3 for K in soil (Mehlich-1). The N, P and K levels in the shoot dry matter of physic nut were 37.4, 2.1 and 35.7 g kg-1, respectively.

Application of alkaline waste from pulp industry to acid soil with pine

In Brazil extensive areas are covered with pine forests, planted for pulp and paper production. This industry generates solid alkaline waste, such as dregs. The application of this dregs to forest soils is an alternative for soil acidity correction and plant nutrient supply, as well as a solution for its proper disposal. The purpose of this study was to compare the residual effect of surface application of dregs and dolomitic lime on (a) changes in the physical and chemical properties of an acidic soil and (b) pine tree development. The experiment was carried out in 2004 in Bocaina do Sul, Santa Catarina, consisting of the application of increasing dreg and lime rates to a Pinus taeda L. production area, on a Humic Cambisol, in a randomized block design with four replications and 10 x 10 m plots. The treatments consisted of levels of soil acidity amendments corresponding to the recommendations by the SMP method to reach pH 5.5 in the 0-20 cm layer, as follows: no soil amendment; dregs at 5.08 (1/4 SMP), 10.15 (1/2 SMP) and 20.3 Mg ha-1 (1 SMP); and lime at 8.35 (1/2 SMP) and 16.7 Mg ha-1 (1 SMP). Soil layers were sampled in 2010 for analyses of soil chemical and physical properties. The diameter at breast height of the 6.5 year old pine trees was also evaluated. Surface application of dregs improved soil chemical fertility by reducing acidity and increasing base saturation, similar to liming, especially in surface layers. Dregs, comparable to lime, reduced the degree of clay flocculation, but did not affect the soil physical quality. There was no effect of the amendments on increase in pine tree diameter. Thus, the alternative to raise the pH in forest soils to 5.5 with dregs is promising for the forestry sector with a view to dispose of the waste and increase soil fertility.

Mineralogy of the clay fraction of Alfisols in two slope curvatures: III - spatial variability

A good knowledge of the spatial distribution of clay minerals in the landscape facilitates the understanding of the influence of relief on the content and crystallographic attributes of soil minerals such as goethite, hematite, kaolinite and gibbsite. This study aimed at describing the relationships between the mineral properties of the clay fraction and landscape shapes by determining the mineral properties of goethite, hematite, kaolinite and gibbsite, and assessing their dependence and spatial variability, in two slope curvatures. To this end, two 100 × 100 m grids were used to establish a total of 121 regularly spaced georeferenced sampling nodes 10 m apart. Samples were collected from the layer 0.0-0.2 m and analysed for iron oxides, and kaolinite and gibbsite in the clay fraction. Minerals in the clay fraction were characterized from their X-ray diffraction (XRD) patterns, which were interpreted and used to calculate the width at half height (WHH) and mean crystallite dimension (MCD) of iron oxides, kaolinite, and gibbsite, as well as aluminium substitution and specific surface area (SSA) in hematite and goethite. Additional calculations included the goethite and hematite contents, and the goethite/(goethite+hematite) [Gt/(Gt+Hm)] and kaolinite/(kaolinite+gibbsite) [Kt/(Kt+Gb)] ratios. Mineral properties were established by statistical analysis of the XRD data, and spatial dependence was assessed geostatistically. Mineralogical properties differed significantly between the convex area and concave area. The geostatistical analysis showed a greater number of mineralogical properties with spatial dependence and a higher range in the convex than in the concave area.

INTERNAL STRUCTURE OF A VERMICULAR IRONSTONE AS DETERMINED BY X-RAY COMPUTED TOMOGRAPHY SCANNING

Ironstones or petroplinthites are common materials in soils under humid tropical climate, generally defined as the result of Fe oxide accumulation in areas where the water table oscillates, and may exhibit considerable morphological variability. The aim of this study was to examine the internal structure and porosity of an ironstone fragment from a Petroferric Acrudox in Minas Gerais, Brazil, by computed tomography (CT) and conventional techniques. The sample analyzed had total porosity of 59.5 %, with large macropores in the form of tubular channels and irregular vughs, the latter with variable degrees of infilling by material released from the ironstone walls or the soil matrix. The CT scan also showed that the ironstone has wide variation in the density of the solid phase, most likely due to higher concentrations or thick intergrowths of hematite and magnetite/maghemite, especially in its outer rims. The implications of these results for water retention and soil formation in ironstone environments are briefly discussed.

THREE DIMENSIONAL CHARACTERIZATION OF SOIL MACROPOROSITY BY X-RAY MICROTOMOGRAPHY

Analysis of the soil pore system represents an important way of characterizing soil structure. Properties such as the shape and number of pores can be determined through soil pore evaluations. This study presents a three-dimensional (3D) characterization of the shape and number of pores of a sub-tropical soil. To do so, a second generation X-ray microtomograph equipped with a plain type detector was employed. A voltage of 120 kV and current of 80 mA was applied to the X-ray tube. The soil samples analyzed were collected at three different depths (0-10, 10-20, and 20-30 cm). The results obtained allowed qualitative (images) and quantitative (3D) analyses of the soil structure, revealing the potential of the microtomographic technique, as well as the study of differences in soil macroporosity at different depths. Macroporosity was 5.14 % in the 0-10 cm layer, 5.10 % in the 10-20 cm layer, and 6.64 % in the 20-30 cm layer. The macroporosity of unclassified pores (UN) was 0.30 % (0-10 and 10-20 cm) and 0.40 % (20-30 cm), while equant pores (EQ) had values of 0.01 % at the three depths under analysis.

ELEMENTOS-TRAÇO EM ÁREAS DE VEGETAÇÃO NATIVA E AGRICULTURA INTENSIVA DO ESTADO DE MATO GROSSO DETERMINADOS POR FLUORESCÊNCIA DE RAIOS-X POR REFLEXÃO TOTAL

A espectroscopia de raios-X por reflexão total (TXRF) é uma técnica promissora para análise de elementos-traço (ETs), principalmente por não ser necessária a digestão das amostras, reduzindo assim a geração de resíduos e emissão de vapores tóxicos. Este trabalho comparou os teores dos ETs: Cr, Mn, Ni, Zn, Cu, As, Se, Hg e Pb, coletados em solos de área de agricultura intensiva e vegetação nativa, determinados por TXRF e por espectrometria de absorção atômica de chama ou forno de grafite (FAAS/GFAAS). Adicionalmente, compararam-se os teores dos ET com valores de referência para solos não contaminados. As amostras de solo foram coletadas na profundidade 0,0-0,2 m em municípios representativos de cada região agrícola do Estado de Mato Grosso (Rondonópolis, Alto Garça, Primavera do Leste, Campo Novo, Nova Mutum, Lucas do Rio Verde, Sorriso, Sinop, Campo Novo dos Parecis, Campos de Julho e Vila Bela da Santíssima Trindade). Em cada município, foram selecionadas seis áreas, totalizando 72 amostras, todas georreferenciadas. Para a leitura dos teores de ET no aparelho de TXRF S2 Picofox™, foram preparadas suspensões de solo usando Triton X-100 a 5 % v/v utilizando gálio como padrão interno, enquanto no FAAS/GFAAS as amostras foram submetidas à digestão ácida pelo método 3051A. Considerando área cultivada e área nativa, respectivamente, os teores médios dos ET por TXRF, em mg kg-1, foram: Cr, 69 e 62; Zn, 16 e 8; Pb, 28 e 21; Mn, 56 e 42; As, 2 e 2; Cu, 9 e 8; e Ni, 2 e 2. O Cd, Se e Hg não foram detectados por TXRF nas amostras analisadas. Para As, Cr, Mn, Zn, Ni, Cu e Pb, houve correlação linear (p<0,001) positiva entre as técnicas e, no geral, os teores obtidos para esses ET em TXRF foram superiores aos do FAAS/GFAAS. Os teores de todos os elementos detectados pelo TXRF, exceto o Cr, estão dentro das faixas dos relatados para solos não contaminados e muito inferiores aos limites de alerta estipulados na literatura.

Importância das interações cultivares x locais e cultivares x anos na avaliação de milho na safrinha

Com o objetivo de verificar a importância da interação cultivares x locais e cultivares x anos e de identificar entre os híbridos já disponíveis os que sejam mais adaptados e estáveis para o cultivo em safrinha, foram estimados os parâmetros de adaptabilidade e estabilidade a partir de dados obtidos em experimentos de avaliação de cultivares de milho na safrinha, nos anos de 1993, 1994 e 1995. Esses experimentos foram conduzidos nos Estados de São Paulo, Goiás e Paraná. O delineamento utilizado foi em blocos casualizados com três repetições. Constatou-se que a magnitude da variância da interação cultivares com anos dentro de locais foi mais expressiva do que entre locais, o que indica a necessidade de que as avaliações de cultivares na safrinha sejam realizadas num maior número de anos. As cultivares diferiram quanto à adaptabilidade e estabilidade de produção de grãos. Os materiais que se destacaram como mais adaptados e estáveis foram o híbrido simples Zeneca 8452, o híbrido triplo C 805 e o híbrido duplo Agromen 2012. Já os híbridos duplos BR 201, Planagri 411, AG 303 e C 125 foram os que mostraram menor adaptação e maior instabilidade.

Characterization for plant height and flowering date in the biological species oat

The use of wild oat races in artificial hybridization with cultivated oat (Avena sativa L.) has been used as a way of increasing the variability. This work aimed to identify the variability for plant height and flowering date of groups of cultivated oat genotypes, wild introductions of A. fatua L. and segregating populations of natural crosses between A. sativa and A. fatua. Wide genetic variability was observed for both traits in the groups and between them. The wild group of A. fatua L. showed high plants with early maturity, but in the segregating group there was reduced plant height and early maturity. The wild introductions of A. fatua L. studied in this work can be used in oat breeding programs to increase genetic variability by transferring specific characters into the cultivated germ plasm.

Effect of phosphorus and potassium on yield and on agronomical characteristics of cotton

With the objective of studying the effect of increasing phosphorus and potassium doses on the agronomical and technological characteristics of the cotton (Gossypium hirsutum L.), cultivar IAC 20, an experiment was carried out during 1994/95 on a Red-Dark Latossol at the Embrapa-Centro de Pesquisa Agropecuária do Oeste (CPAO) in Ponta Porã, MS, Brazil. A randomized bloch design was used in a 3 x 5 factorial arrangement with four replications. The doses were 30, 60 and 90 kg ha-1 of P2O5, applied as triple superphosphate, and 0, 30, 60, 90 and 120 kg ha-1 of K2O as KCl. The K2O doses used had a significant influence on the seed cotton yield, plant height and weight of 100 seeds and of bolls.

Caracterização química da carne de cabrito da raça Moxotó e de cruzas Pardo Alpina x Moxotó

O objetivo da pesquisa foi avaliar a composição química da carne de cabrito-mamão (idade média de 72 dias), da raça Moxotó (MOX), grupos genéticos ¾ Pardo Alpina x ¼ Moxotó (3/4 PAMOX) e ½ Pardo Alpina x ½ Moxotó (1/2 PAMOX). A análise apresentou valores médios entre 77,80% a 80,25% de umidade; 15,90% a 19,08% de proteína; 1,12% a 1,21% de gordura, e 1,29% a 2,03% de cinzas. Quanto à composição mineral, os valores médios variaram de 5,62 mg/100 g a 8,21 mg/100 g de cálcio; 156,97 mg/100 g a 196,25 mg/100 g de fósforo; 0,26 mg/100 g a 0,48 mg/100 g de ferro; 16,25 mg/100 g a 23,72 mg/100 g de magnésio; 59,20 mg/100 g a 78,79 mg/100 g de sódio, e de 259,69 mg/100 g a 292,24 mg/100 g de potássio. Foram encontradas diferenças significativas a 5% de probabilidade entre os grupos genéticos no que diz respeito à composição de umidade, proteína e cinzas e mineral quanto a elementos estudados. Não houve diferenças entre os valores de gordura dos grupos genéticos.

Estiolamento e regeneração na multiplicação in vitro do abacaxizeiro híbrido PE x SC-52

Segmentos nodais estiolados são utilizados para a micropropagação e conservação da identidade genética em várias culturas. O objetivo deste trabalho foi avaliar a multiplicação in vitro de segmentos estiolados para produção de mudas do abacaxi híbrido PE x SC-52. Talos de plântulas produzidos in vitro receberam inóculo em tubos de ensaio contendo o meio de cultura MS e mantidos no escuro por 60 dias, para estiolamento. Foram utilizados três tratamentos, sem reguladores de crescimento, ANA a 1,86 mg/L e AIA a 1,75 mg/L em cinco repetições com dez explantes por repetição. Não houve diferença no número de brotos estiolados por explante entre os tratamentos avaliados. No entanto, aos 35 dias de cultivo, os tratamentos com ANA e AIA apresentavam maior número de nós por broto, sendo o ANA superior aos demais após 60 dias. Brotos estiolados in vitro por 60 dias foram colocados horizontalmente em placas de Petri contendo o meio MS e incubados na presença de luz. Foram usados quatro tratamentos para a regeneração das plântulas, sem reguladores de crescimento; BAP a 2 mg/L; ANA a 1,86 mg/L + BAP a 2 mg/L e CIN a 5 mg/L, em quatro repetições, com sete brotos estiolados, por repetição. O BAP promoveu maior número de plântulas regeneradas por broto e por nó, com uma média de 10,4 plântulas por broto estiolado, aos 30 dias.

Interação genótipo x ambiente no desempenho produtivo da soja no Paraná

Os objetivos deste trabalho foram conhecer o grau de representatividade dos locais no Estado do Paraná, onde são conduzidos os ensaios de avaliação final de produtividade de linhagens de soja no período 1990/2000 e realizar estudo de adaptabilidade e estabilidade das linhagens no ano agrícola 1999/2000. As linhagens testadas pertencem aos grupos de maturação precoce, semiprecoce e médio. Verificaram-se padrões de similaridade de resposta das linhagens dos três grupos de maturação, em alguns locais, em todos ou na maioria dos anos testados. Esses padrões dependeram do grupo de maturação. Contudo, as avaliações em Londrina/Cambé, Campo Mourão, Guarapuava/Mariópolis e Sertaneja foram sempre indicadas. O local Ponta Grossa - 1 foi útil na discriminação de linhagens do grupo precoce, e Ponta Grossa - 2, dos grupos semiprecoce e médio. O estudo de adaptabilidade e estabilidade revelou que as linhagens precoces BR95-7613, BRS 137, OC95-3006 e CD96-518 tiveram bom desempenho produtivo, adaptabilidade geral e previsibilidade. A linhagem semiprecoce BR96-25619 mostrou a maior produtividade, tanto em ambientes favoráveis como nos desfavoráveis, e pode ser indicada como tendo adaptabilidade geral. Outras linhagens semiprecoces de bom desempenho, como BR96-18710 e BRS 154, são indicadas para ambientes favoráveis e geral (ambientes favoráveis e desfavoráveis), respectivamente. As linhagens OC95-3194, BR96-12086 e BR96-16185, do grupo de maturação médio, destacam-se nos ambientes favoráveis e desfavoráveis.