Simultaneous determination of four phenolic compounds in extracts of aerial parts of Ipomoea pes-caprae (L.) R. Br. (Convolvulaceae) by HPLC-UV

Among other applications, Ipomoea pes-caprae is popularly used to treat jellyfish stings, supporting the development of a product for dermatological use. Hydroethanolic spray-dried extract was chosen for the further development of phytomedicines, and a stability-indicative HPLC-UV method was developed and validated for the determination of isoquercitrin and isochlorogenic acids A, B and C. The method was developed using a C18 column (250 x 4.6 mm, 5 µm) with an acetonitrile:water mobile phase at pH 3.0 in a gradient run. The four constituents and other unidentified components of the extract were appropriately resolved without interference of degradation products after stress tests (acid, alkali, neutral, oxidant, photolysis). The method showed linearity in the isoquercitrin concentration range from 5.0-50.0 µg mL-1, with adequate precision (RSD% < 2.5% for the intra- and inter-day studies), accuracy (recovery of 100.0 ± 2.0%), and robustness. Both the herbal drug and spray-dried extract of I. pes-caprae were subjected to stability studies in accelerated and long-term conditions over four months. The samples maintained their characteristics and marker contents (< 10% of variation).

Cotton resistance to ramulose and variability of Colletotrichum gossypii f. sp. cephalosporioides

Four cultivars and 21 lines of cotton were evaluated for resistance to ramulose (Colletotrichum gossypii f. sp. cephalosporioides) in a field where the disease is endemic. The seeds of each genotype were planted in 5 x 5 m plots with three replications. The lines CNPA 94-101 and 'CNPA Precoce 2'were used as standard susceptible and resistant references, respectively. The disease incidence (DI) was calculated from the proportion of diseased plants in the plot. The disease index (DIn) was calculated from the disease severity using a 1 to 9 scale, and was evaluated at weekly intervals starting 107 days after emergence. The data collected was used to calculate the area under disease progress curve (AUDPC). In general, the DIn increased linearly with time and varied from 20.0 to 57.1 and AUDPC from 567 to 1627 among the genotypes which could be clustered in to two distinct groups. The susceptible group contained two cultivars and nine lines and the resistant group contained one cultivar and 12 lines. The relationship between disease index and evaluation times was linear for the 25 genotypes tested. The line CNPA 94-101, used as susceptible standard, was the most susceptible with an average DI = 83.4, DIn = 57.1 and AUDPC = 1627.7. The line CNPA 96-08 with DI = 37.8, DIn = 20.0 and AUDPC = 567.7 was the most resistant one. Among the commercial cultivars 'IAC 22' was the most susceptible and 'CNPA Precoce 2', used as resistant standard was the most resistant. The variability in virulence of the pathogen was studied by spray inoculating nine genotypes with conidial suspensions (10(5)/mL) of either of the 10 isolates. The disease severity was evaluated 30 days later using a scale of 1 to 5. The virulence of the isolate was expressed by DIn. All the isolates were highly virulent but their virulence avaried for several genotypes and could be clustered in two distinct groups of less and more virulent isolates. The isolate MTRM 14 from Mato Grosso was the least virulent while Minas Gerais was the most virulent, with DIn of 6.36 and 46.47, respectively. In this experiment the line HR 102 and the cultivar 'Antares' were the most resistant ones with DIns of 18.32 and 19.14, respectively.

Relationship between IC50determined in vitro/in vivoand the fungicide rate used in the Field

Published data containing fungicide concentrations that control 50% (IC50) of a given fungus were analyzed. In the analysis we considered: (i) the IC50 determined in vitroand in vivofor a given fungicide and for a specific fungus; (ii) the concentration (g/ha) of active ingredient for the fungicide indicated to control a specific disease in the field; (iii) water volume of 120/L used in the spray; (iv) the fungicide a.i. concentration (mg/L) in 120 L volume; (v) and the ratio of the concentration used in the field with that determined in the laboratory. The analysis were performed by using IC50 data for DMIs, QoIs, a carbamate and a benzimidazol against the following fungi Bipolaris sorokiniana, Drechslera tritici-repentis, D. siccans, Fusarium graminearum, Puccinia triticina, Exserohilum turcicum, Phakopsora pachyrhiziand Corynespora cassiicola. The fungicide concentrations sprayed in the field were 33.9 (D. siccansand trifloxystrobin) to 500,000.0 (E. turcicumand iprodione) times higher than that determined in the laboratory. It was concluded that the IC50 was not related to the concentration used in the field and therefore should be used to compare the power among fungicides and to monitor the fungal sensitivity shift towards fungicides

DIFFERENTIAL RESPONSE OF CLONES OF EUCALYPT TO GLYPHOSATE1

Weed control is commonly performed by the inter-row mechanical weeding associated to intrarow glyphosate directed spraying, causing a risk for drift or accidental herbicide application, that can affect the crop of interest. The objective was to evaluate the response of clones C219, GG100, I144, and I224 of eucalypt (Eucalyptus grandis x E. urophylla) to glyphosate doses of 0, 18, 36, 72, 180, 360, and 720 g of acid equivalent per hectare. The clones showed different growth patterns with regard to height, leaf number, stem dry weight, relative growth rate, net assimilation rate, and relative leaf growth rate. The clones I144 and GG100 were more susceptible to glyphosate, showing the doses required to reduce dry weight by 50% of 113.4 and 119.6 g acid equivalent per hectare, respectively. The clones C219 and I224 were less susceptible to glyphosate, showing the doses required to reduce dry weight by 50% of 237.5 and 313.5 g acid equivalent per hectare, respectively. Eucalyptus clones respond differently to glyphosate exposure, so that among I224, C219, GG100, and I144, the susceptibility to the herbicide is increasing.

Modelagem de um condicionador de ar de alta precisão para uso em processamento agrícola

Apresenta-se neste trabalho, estudo detalhado sobre a modelagem de um condicionador de ar com controle acurado de temperatura e umidade relativa. Desenvolveu-se um programa de computador que permite predizer o comportamento do sistema sob diferentes condições psicrométricas e de vazão do ar de entrada. O modelo global físico-matemático inclui equações de balanço de massa e de energia para três diferentes volumes de controle que compõem o condicionador. Modelaram-se os processos de mistura, evaporação (ou condensação) simultânea de uma superfície d'água e de uma gota e o aquecimento de corrente de ar, separadamente. Propõem-se expressões semi-empíricas simples para os coeficientes de transferência de calor e massa inerentes ao processo de evaporação sobre uma superfície d'água e um modelo simplificado para o sistema de spray. Construiu-se um condicionador de ar no qual foram feitos testes experimentais para o ajuste das constantes que aparecem nas expressões para os coeficientes de transferência. Os dados obtidos validaram o modelo global, com precisão aceitável para projetos de engenharia.

Otimização da eficiência de limpeza em equipamento de beneficiamento de tomate de mesa

A etapa de limpeza no sistema de beneficiamento do tomate de mesa é essencial para a aceitação do produto pelo consumidor, pois o grau de limpeza dos frutos está diretamente relacionado com a qualidade do produto. Entretanto, a etapa de lavagem, nos atuais equipamentos de limpeza, utilizada em unidades comerciais de beneficiamento, demanda volume excessivo de água, trazendo sérias preocupações ambientais. Este trabalho teve como objetivo comparar a eficiência de limpeza em dois sistemas, avaliando diferentes configurações operacionais relacionadas com a rotação de escovas, vazão do sistema e tempo de permanência do fruto sobre o jato. Comparou-se o sistema convencional utilizado em equipamentos comerciais com o sistema composto por um bocal de spray do tipo cone cheio. Os resultados demonstraram que a eficiência de limpeza não está diretamente relacionada com o volume de água utilizado, mas, sim, à pressão da água, associado ao tempo de permanência dos frutos e à rotação das escovas. Portanto, o uso de spray em sistemas de limpeza de frutos de tomate pode trazer benefícios tanto para a eficiência de limpeza, com incrementos superiores a 13%, como para o meio ambiente, trazendo redução no consumo de água.

Measurement systems of soil water matric potential and evaluation of soil moisture under different irrigation depths

The development of new methodologies and tools that enable to determine the water content in soil is of fundamental importance to the practice of irrigation. The objective of this study was to evaluate soil matric potential using mercury tensiometer and puncture digital tensiometer, and to compare the gravimetric soil moisture values obtained by tensiometric system with gravimetric soil moisture obtained by neutron attenuation technique. Four experimental plots were maintained with different soil moisture by irrigation. Three repetitions of each type of tensiometer were installed at 0.20 m depth. Based on the soil matric potential and the soil water retention curve, the corresponding gravimetric soil moisture was determined. The data was then compared to those obtained by neutron attenuation technique. The results showed that both tensiometric methods showed no difference under soil matric potential higher than -40 kPa. However, under drier soil, when the water was replaced by irrigation, the soil matric potential of the puncture digital tensiometer was less than those of the mercury tensiometer.

Fungicide application using a trailing boom in soybean fields

The objective of this study was to determine the effects in the yield of soybean crop utilizing a trailing boom sprayer for chemical control of late season diseases. The experimental design was randomized blocks with 04 treatments, which consisted of applying fungicides with a traditional sprayer, trailing boom, the traditional sprayer plus the trailing boom simultaneously and control (without fungicide aerial application) in 05 repetitions per treatment. The variables evaluated were: final plant population, pods per plant, grains per pod, weight of one thousand grains and yield. It was concluded that the control of foliar diseases with fungicides presented weight of one thousand grains and yield significantly higher than the average of plots without fungicide application. The trailing boom did not significantly affect the yield compared to the technology currently used.

Air flow humidification for air-assisted boom sprayer

The air-assisted ground spray is fairly widespread. However, due to the unpredictable weather conditions, the operational efficiency is impaired by stops on grounds of low humidity and high temperatures. The aim of this work was to assess an air humidification method and evaluate its impact on temperature and air humidity for the air curtain of the air-assisted sprayer. With respect to relative air humidity, it has increased in 6.59%, being the maximum change when inserting 1.92 L min-1. So, it is concluded that the pipeline humidification might significantly reduce temperature and enhance air humidity. The treatments performed in this study consisted of a varied flow of a humidity device, related to weather conditions. Temperature and relative air humidity were measured at 1.0 m height from right to left of middle point of the machine, corresponding to the end of the spray boom, in the middle and end of right spray boom. The readings were also performed at three different distances from the end of the pipeline and at 0.25 and 0.50 m from that to the soil. The results show that 0.48 L min-1 in the humidification system has promoted a better efficiency in reducing air-temperature, on average 2.52 ºC when compared to the non-humidified one.

Coeficiente de descarga em emissores de pivô central

Este trabalho foi desenvolvido com o objetivo de determinar, em condições laboratoriais, o coeficiente de descarga (Cd) dos emissores fixos tipo “spray” (Senninger, Nelson e Fabrimar) utilizados em equipamentos pivô central no Brasil. Foram avaliados 45 bocais Senninger, 42 bocais Nelson e 36 bocais Fabrimar, com três repetições, totalizando 369 bocais ensaiados. As pressões de funcionamento variaram entre 6 e 30 PSI (41,37 a 206,84 kPa), com intervalo de leitura a cada 2 PSI (13,79 kPa), totalizando 13 pressões analisadas por bocal. Foram ajustadas as curvas do coeficiente de descarga em função do diâmetro de bocal, para quatro pressões de operação: 10; 15; 20 e 30 PSI (68,95; 103,42; 137,90 e 206,84 kPa). Utilizou-se de dois manômetros de precisão (analógico e digital) previamente calibrados em um manômetro de peso morto. As vazões foram obtidas utilizando três medidores eletromagnético-indutivos, calibrados em recipiente volumétrico. O diâmetro dos bocais foi mensurado através de uma ampliação em projetor de perfil da marca Starrett, modelo HB 400. Os resultados evidenciaram que o coeficiente de descarga varia em função da pressão e do diâmetro do bocal. Nos ensaios conduzidos, obtiveram-se Cds compreendidos na faixa de 0,88 a 0,98 para a faixa de emissores analisados.

Physical characteristics of oily spraying liquids and droplets formed on coffee leaves and glass surfaces

The physical characteristics of a spray liquid are important in getting a good droplet formation and control efficiency over a particular target. As a function of these characteristics, it is possible to decipher which is the best adjuvant based on the respective concentration used during the spray. Therefore, ten spraying liquids were prepared, which varied in concentrations of pesticide lufenuron + profenofos, mineral oil, water and manganese sulfate. Pendant droplets formed from these mixtures were measured to examine their impact on surface tension. Droplets were applied to the surface of coffee leaves and the surface tension, contact angle formed and the leaf area wetted by the droplet, were measured. A smooth glass surface was taken as a comparative to the coffee leaves. The highest concentrations of oil resulted in lower surface tension, smaller contact angles of droplets on leaf surfaces and larger areas wetted by the droplets. Both surfaces showed hydrophilic behavior.

Distribution pattern, surface tension and contact angle of herbicides associated to adjuvants on spraying and control of Ipomoea hederifolia under rainfall incidence

ABSTRACTScarlet Morning Glory is considered to be an infesting weed that affects several crops and causes serious damage. The application of chemical herbicides, which is the primary control method, requires a broad knowledge of the various characteristics of the solution and application technology for a more efficient phytosanitary treatment. Therefore this study aimed to characterize the effect of rainfall incidence on the control of Ipomoea hederifolia, considering droplet size, surface tension, contact angle of droplets formed by herbicides liquid on vegetal and artificial surfaces, associated to adjuvants and the volumetric distribution profile of the spray jet. The addition of the adjuvants to the herbicide spraying liquid improved the application quality, as it influenced the angle formed by the spray by broadening the deposition band of the spray nozzle and thus the possible distance between the nozzles on spray boom and due the changes at droplet size, which contribute to a safety application. The rainfall occurrence affected negatively the weed control with the different spraying liquids and also the dry matter weight, suggesting that the phytosanitary product applied was washed off.

Spraying systems and traveling speed in the deposit and spectrum of droplets in cotton plant

ABSTRACT Tractor traveling speed can influence the quality of spraying depending on the application technology used. This study aimed to evaluate the droplet spectrum, the deposition and uniformity of spray distribution with different spraying systems and traveling speeds of a self-propelled sprayer in two phenological stages of the cotton plant (B9 and F13). The experimental design was randomized blocks and treatments were three spraying techniques: common flat spray tips; tilted flat jet with air induction, at 120 L ha-1; and rotary atomizer disk, 20 L ha-1, combined with four traveling speeds: 12, 15, 18 and 25 km h-1, with four replications. Spraying deposition was evaluated for both leaf surfaces from the cotton plant apex and base (stage B9) and middle part of the plant (stage F13) with a cupric marker. A laser particle analyzer also assessed the droplet spectrum. The centrifugal power spray system produces more homogeneous droplet spectrum and increased penetration of droplets into the canopy in both phenological stages. Variation on the operating conditions necessary for increased traveling speed negatively influences the pattern of spraying deposits.

Avaliação da eficiência da desinfecção de teteiras e dos tetos no processo de ordenha mecânica de vacas

O presente trabalho teve como objetivos avaliar a eficiência do processo de desinfecção de teteiras por imersão em solução desinfetante utilizando duas fontes de cloro, hipoclorito de sódio e cloro orgânico, a dinâmica de cloro residual nesses dois tipos de soluções, ao longo do processo de ordenha, e a eficiência de três métodos de desinfecção: imersão, spray e esponja na remoção de microrganismos dos tetos de vacas em lactação, utilizando o cloro como desinfetante. Foram determinados os números de coliformes totais, coliformes fecais, Staphylococcus sp e microrganismos mesófilos nas amostras colhidas das teteiras, dos tetos e da solução desinfetante. Os resultados obtidos demonstraram que a prática da desinfecção de teteiras entre vacas, utilizando-se hipoclorito de sódio ou dicloroisocianurato de sódio como fontes de cloro, na concentração em torno de 150ppm não foi eficiente na redução dos microrganismos presentes nas teteiras. A solução desinfetante a base de dicloroisocianurato de sódio apresentou maior estabilidade. Os métodos de desinfecção dos tetos proporcionaram redução nos números de microrganismos pesquisados, em todos os tratamentos utilizados, mostrando ser uma ferramenta simples para minimizar o risco de transmissão de patógenos durante a ordenha e aumentar a qualidade microbiológica do leite produzido.

Efficacy of the d-phenothrin/pyriproxyfen association against mites in naturally co-infested rabbits

The aim of the present study was to evaluate the efficacy of the d-phenothrin/pyriproxyfen association against Psoroptes ovis, Cheyletiella parasitivorax, and Leporacarus gibbus infestations in naturally co-infested rabbits. Twenty crossbreed (New Zealand White x California) rabbits concurrently infested by the three mite species were randomly divided in two groups. All rabbits presented with hyperemia, erythema and formation of crusts in the ear canals caused by P. ovis. Infestations by both C. parasitivorax and L. gibbus were considered asymptomatic in all animals.Ten animals were treated with a 4.4% d-phenothrin and 0.148% pyriproxyfen spray formulation until have their body surface uniformly sprayed, including external ear canals. The other ten rabbits remained untreated, serving as control group. Observations were done on days +7, +14, +21, +28, and +35 post-treatment. The d-phenothrin/pyriproxyfen association showed 100% efficacy against the three mite species and was responsible for the remission of psoroptic mange lesions on treated animals. No signs of intoxication were observed. The results indicate that d-phenothrin/pyriproxyfen spray formulation in a single application is an effective and clinically safe option for the control of different mite infestations in rabbits.