263 resultados para isotermas de adsorção
Resumo:
A adsorção/dessorção de metais pelos solos é afetada por vários fatores, dentre os quais, a concentração salina da solução do solo. Este estudo teve o objetivo de avaliar o efeito da variação da força iônica da solução de equilíbrio (I) sobre a adsorção/dessorção de Pb por Latossolos brasileiros. Amostras do horizonte A foram colocadas para reagir com Pb(NO3)2 0,15 mmol L-1 em Ca(NO3)2 5 e 50 mmol L-1 (pH 5,5; I = 15 e 150 mmol L-1; relação solo:solução 1:100), durante 72 horas. Em seguida, as amostras foram colocadas para dessorver em Ca(NO3)2 5 mmol L-1. Dos 17 Latossolos, apenas seis apresentaram diferenças significativas entre as quantidades adsorvidas nos dois valores de I. As correlações significativas obtidas entre as quantidades adsorvidas e alguns atributos dos solos (SiO2 e Fe2O3 do ataque sulfúrico, Fe d e Fe o, caulinita, hematita, CTC e superfície específica) foram as mesmas para os dois valores de I. A variação de I durante a adsorção teve pouco efeito sobre a dessorção de chumbo. A não-variação da quantidade adsorvida com a mudança de I indica que o Pb é adsorvido, na maioria dos Latossolos, como complexo de esfera interna. Conclui-se que, dentro destas condições experimentais, o Pb não fez parte do complexo de troca da maioria dos solos estudados.
Resumo:
O objetivo deste trabalho foi avaliar o efeito da força iônica na adsorção de Cd em amostras de 17 Latossolos (horizonte A) de diversas regiões geográficas do Brasil. A reação dos solos com 0,167 mmol L-1 de Cd(NO3)2 foi avaliada por 72 horas em soluções de Ca(NO3)2 a 5, 50 e 150 mmol L-1 (pH 6,5; relação solo:solução 1:100) com forças iônicas de 15, 150 e 450 mmol L-1, respectivamente. A adsorção de Cd decresceu com o aumento da força iônica em todos os solos, com valores médios adsorvidos iguais a 12,17, 6,92 e 5,70 mmol kg-1 para as forças iônicas de 15, 150 e 450 mmol L-1, respectivamente. Na menor força iônica, a fração de Cd adsorvida foi positivamente correlacionada com argila, matéria orgânica, área superficial específica, caulinita, hematita e Fe2O3 extraído pelo ataque sulfúrico, ditionito-citrato-bicarbonato de sódio e pelo oxalato ácido de amônio, além do Al2O3 do ataque sulfúrico. Para a força iônica de 150 mmol L-1, não houve correlação entre a fração de Cd adsorvida e os atributos dos solos, enquanto em 450 mmol L-1 houve correlação com a matéria orgânica e área superficial específica. O Cd não é retido por sítios de adsorção específica, sendo potencialmente biodisponível nesses Latossolos.
Resumo:
O objetivo deste trabalho foi avaliar o efeito da força iônica da solução de equilíbrio sobre a adsorção e dessorção de arsênio, em 17 latossolos, de diferentes regiões geográficas brasileiras. A adsorção de As foi avaliada em dois valores de força iônica (15 e 150 mmol L-1), duas doses de As (15 e 150 µmol L-1), relação solo:solução final de 1:100 e pH 5,5. Não houve diferença nas porcentagens de adsorção, entre os valores de força iônica 15 e 150 mmol L-1 (63,51 e 64,46%). A porcentagem de dessorção na dose 15 µmol L-1 foi inferior a 15%, nos dois valores de força iônica, exceto para os solos LVd4 e LAd1, em que a porcentagem de dessorção foi superior a 20%.
Resumo:
No presente trabalho, avaliou-se a influência da embalagem de PEBD e da adsorção de etileno, em caquis 'Fuyu', na manutenção da qualidade comercial e na vida útil pós-colheita dos frutos, em 2 safras experimentais (1999-2000 e 2000-2001). Os frutos foram colhidos no estádio de maturação amarelo-alaranjado, na empresa KIWIS'TRIN Ltda - Farroupilha-RS, limpos, selecionados, pré-resfriados e acondicionados em embalagens de PEBD, com ou sem a adsorção de etileno. Na safra de 1999-2000, os frutos foram armazenados a granel, em embalagens de PEBD de 22 µm, com capacidade para 12 e 40 frutos, e de 33 µm, com capacidade para 12 frutos, sendo que metade das embalagens possuía o sachê adsorvedor. No laboratório de Biotecnologia de Alimentos, da UFPel/DCTA, foram avaliadas as seguintes variáveis: Firmeza de polpa, sólidos solúveis totais (SST) e acidez total titulável (ATT). Verificou-se que os frutos embalados em PEBD de 22 µm, com capacidade para 12 frutos, com e sem o sachê de adsorção, apresentaram maior firmeza de polpa, menores teores de sólidos solúveis totais e maiores níveis de acidez total titulável, sugerindo atraso na maturação. Na safra de 2000-2001, foram testados o armazenamento a granel e o armazenamento em embalagens de PEBD de 22 µm, com capacidade para 12; 18 e 24 frutos, com e sem a utilização de sachê. Observou-se que os frutos acondicionados nas embalagens de 22 µm de espessura para 12 frutos, com o sistema de adsorção de etileno, apresentaram maturação mais lenta, com excelente manutenção da qualidade organoléptica.
Resumo:
O trabalho foi realizado no Departamento de Ciência e Tecnologia Agroindustrial, da UFPel/Pelotas, com o objetivo de avaliar a utilização de embalagens de polietileno de baixa densidade (PEBD) e do adsorvedor de etileno em caquis cv. Fuyu. Na safra de 2000-2001, os frutos foram armazenados a granel, em embalagens de PEBD de 0,022 mm contendo doze e 40 frutos e em embalagens de PEBD de 0,033 mm contendo doze frutos, sendo que apenas metade das embalagens possuía o sachê adsorvedor de etileno. De acordo com as variáveis analisadas (distúrbios fisiológicos, concentração/produção de CO2 e etileno), os frutos acondicionados nas embalagens de 0,022 mm contendo doze frutos, com e sem o adsorvedor, apresentavam-se em estádio menos avançado de amadurecimento e com qualidade superior aos demais tratamentos. Já na safra de 2001 - 2002, sob os mesmos parâmetros avaliados no ano anterior, foram testados o armazenamento a granel e o armazenamento em embalagens de PEBD de 0,022 mm, contendo doze, dezoito e 24 frutos, também com e sem a utilização de sachê adsorvedor de etileno. Após 90 dias de armazenamento refrigerado (AR), mais os cinco dias de simulação de comercialização, os frutos acondicionados nas embalagens de 0,022 mm, contendo doze e dezoito frutos, independentemente do sistema de adsorção de etileno, apresentaram os melhores resultados em todas as variáveis testadas.
Resumo:
This article introduces a simplified model for the theoretical study of the physical adsorption process of gaseous He on the planes (100) and (111) of the solid Xe matrix, whose crystalline structure is face centered cubic (fcc). The Ab initio calculations were carried out at the MP2 level of theory employing basis sets obtained through the Generator Coordinate Method, where the core electrons were represented by a pseudopotential. The calculated adsorption energies for the (100) and (111) faces are 5,39 and 4,18 kJ/mol, respectively. This simplified model is expected to be suitable for treating complex systems of applied interest.
Resumo:
The herbicides are being used in huge quantities for various porpouses. Once the herbicide finds its way into the environment, a major part of it comes in contact with soil. Humic substances are major organic constituents of soil. These substances may interact with herbicides in different modes and adsorption is probably the most important one. Adsorption will control the quantity of herbicide in the soil solution, and determines its persistence, leaching, mobility and bioavailability. In this work we studied the interaction between the herbicide 2,4D and soil in the presence and absence of organic matter. The methodology utilized for the determination of 2,4D was gas chromatography with eletron capture detector. The behavior of 2,4D was evaluated through Freundlich isotherms. It was verified that the herbicide 2,4D has a large adsorption in the humic acid .
Resumo:
Silica gel was functionalized with [3-(2-aminoethyl)aminopropyl]trimethoxysilane group (SF-AEATS) and the characterization by chemical analysis (N) and infrared spectroscopy confirmed the functionalization. The capacity of the modified silica to adsorb the complex Ru(III)-EDTA from ethanolic solution was studied. The selectivity coefficients of the complex formed on the support obtained was (Gñ), 2,07 x 10(4) L/mol and the average number of ligand bonded by one metal ion on the support (ñ) was ~ 1.
Resumo:
The influence of the presence of hydrogen on Pt/TiO2 catalysts submitted to reduction treatment has been studied by FT-IR at room temperature. After submitting to LTR treatment, the hydrogen spillover has been detected and the presence of hydrogen at the bulk is shown to produce a strong absorption in the infrared spectral region. After HTR treatment, the hydrogen is strongly chemissorbed.
Resumo:
In environmental studies it is necessary to know the adsorption behavior of metals by soils, since the unfavorable effects of heavy metals and even the micronutrients at high concentrations in the environment are related to these adsorbents' ability to immobilize them. A sample of a humic yellow red oxisol from Araponga region in the State of Minas Gerais, Brazil, was used to verify the adsorption behavior of Cu2+ ions in this substrate. The mathematical model described by Langmuir's adsorption equation in its linearized form was applied and the values of the maximum capacity b and those of the constant related to the bonding energy a were obtained. Aliquots of copper nitrate solutions containing several concentrations of this metal were added to soil samples, the pH being predetermined for developing the adsorption experiments. The chemical and physical characterization of soil sample were performed by determining the organic carbon, nitrogen and phosphorus concentrations, cation exchange capacity (CEC), pH, concentration of metals (Al, Fe, K, Mg, Ca, Zn, Cu, Ni, Cr, Co, Pb, and Cd), granulometric analysis and X-ray diffraction. Langmuir isotherms presented two distinct adsorption regions at both pH 4 and pH 5, showing that the adsorptive phenomenon occurs in two distinct stages. The adsorption sites for the lower part presented greater bonding energy and low adsorption capacity compared with the adsorption sites of the part of the curve corresponding to higher Cu concentrations in the equilibrating solution.
Resumo:
The aim of this work was to evaluate the adsorption conditions of zinc and cadmium ions from aqueous solutions using a comercially available peat from Balneário Arroio do Silva, Santa Catarina State, Brazil. Adsorption studies were carried out in column experiments using radiotracers of the studied metals (65Zn and 115Cd). The pH influence and the interference of other ions, such as Na+, Ca2+, Fe3+ and Al3+on the adsorption process were investigated. The results showed that peat columns are able to retain more than 99% of metal ions in solution in a range of pH from 3,7 to 6,5. Ca2+ and Al3+ ions were the main interferent on adsorption of Zn and Cd ions in solution.
Resumo:
The chemical and physical characterization of coastal peat has been studied. It was examined the pH, organic matter content and elementary and XRD analyses, among other characteristics. The peat was then applied to the retention and competition of metal micronutrients (Cu and Zn) from metal nitrate solutions. The retention was affected by both the pH and time of adsorption, while the competitive character of these metals for the substrate was relevant to each pH examined.
Resumo:
It was evaluated the applicability of Langmuir, Freundlich and Temkin models to copper adsorption in three classes of soils. Fractions of each soil were added to test tubes containing growing concentrations of the metal in solution. The tubes were shaken and the copper concentrations were determined in the extracts by atomic absorption spectrometry (AAS). The models offered a good fit for the experimental data indicating that presence of silicated clay had high influence on copper sorption. The Langmuir isotherm showed high influence of the organic matter in the absorption phenomenon. It was evidenced the importance of further studies related to Temkin model.
Resumo:
The adsorption of H and S2- species on Pd (100) has been studied with ab initio, density-functional calculations and electrochemical methods. A cluster of five Pd atoms with a frozen geometry described the surface. The computational calculations were performed through the GAUSSIAN94 program, and the basis functions adapted to a pseudo-potential obtained by using the Generator Coordinate Method adapted to the this program. Using the cyclic voltammetry technique through a Model 283 Potentiostat/Galvanostat E.G.&G-PAR obtained the electrochemical results. The calculated chemisorption geometry has a Pd-H distance of 1.55Å, and the potential energy surface was calculated using the Becke3P86//(GCM/DFT/SBK) methodology. The adsorption of S2- ions on Pd surface obtained both through comparison between the experimental and theoretical results, at MP2 level, suggest a S2- absorption into the metallic cluster. The produced Pd-(S2-) system was show to be very stable under the employed experimental conditions. The paper has shows the powerful aid of computational methods to interpret adsorption experimental data.
Resumo:
This paper presents a study of adsorption of xanthate with alkyl chain of two (C2XK), four (C4XK) and eight (C8XK) atoms of carbon, on pyrite from Santa Catarina, Brazil. The results showed that pyrite surface changes from hydrophilic to hydrophobic when xanthate is adsorbed increasing the contact angle to 35º for C2XK, and to 90º for C4XK and C8XK. The rate of flotation of pyrite particles after adsorption increases with the increase of the number of carbon atoms in the alkyl chain in agreement with the results of contact angle measurements.