The effect of wood supply and bleaching process on pulp brightness stability

One hundred different 5.5-year-old Eucalyptus grandis x Eucalyptus urophylla wood clones were cooked to kappa number 15-17.5 and the resulting kraft pulps oxygen-delignified to kappa 9.5-11.5 under fixed conditions, except for chemical charges. Thirteen samples showing large variations in effective alkali requirement, pulp yield and O-stage efficiency and selectivity were selected for brightness reversion studies. These samples were bleached to 90-91% ISO by DEDD and DEDP sequences and their brightness stability and chemical characteristics determined. Heat reversion of the eucalyptus kraft pulps was strongly influenced by the wood supply, with brightness loss varying in the range of 2.1-3.6 and 0.8-1.7 %ISO for ODEDD and ODEDP bleached pulps, respectively. Pulps bleached by the ODEDP sequence showed reversion values 1.3-1.9 % ISO lower than those bleached by the ODEDD sequence. Pulp carbonyl content decreased by 35-40% during the final peroxide bleaching stage. Carbonyl and carboxyl groups correlated positively with brightness reversion, as did permanganate number and acid soluble lignin. Pulp final viscosity and metal and DCM extractives contents showed no significant correlation with brightness reversion. Pulping, oxygen delignification and ECF bleaching performances also showed no correlation with brightness reversion.

Chemical characteristics and Kraft pulping of tension wood from Eucalyptus globulus labill

Tension (TW) and opposite wood (OW) of Eucalyptus globulus trees were analyzed for its chemical characteristics and Kraft pulp production. Lignin content was 16% lower and contained 32% more syringyl units in TW than in OW. The increase in syringyl units favoured the formation of β-O-4 bonds that was also higher in TW than in OW (84% vs. 64%, respectively). The effect of these wood features was evaluated in the production of Kraft pulps from both types of wood. At kappa number 16, Kraft pulps obtained from TW demanded less active alkali in delignification and presented slightly higher or similar pulp yield than pulps made with OW. Fiber length, coarseness and intrinsic viscosity were also higher in tension than in opposite pulps. When pulps where refined to 30°SR, TW pulps needed 18% more revolutions in the PFI mill to achieve the same beating degree than OW pulps. Strength properties (tensile, tear and burst indexes) were slightly higher or similar in tension as compared with opposite wood pulps. After an OD0(EO)D1 bleaching sequence, both pulps achieved up to 89% ISO brightness. Bleached pulps from TW presented higher viscosity and low amount of hexenuronic acids than pulps from OW. Results showed that TW presented high xylans and low lignin content that caused a decrease in alkali consumption, increase pulp strength properties and similar bleaching performance as compared with pulps from OW.

Pisolithus sp. tolerance to glyphosate and isoxaflutole in vitro

The ectomycorrhizal fungi have different tolerance to herbicides and may promote the survival and growth of the eucalypts tree. This study aimed to evaluate the tolerance of Pisolithus sp. isolates to glyphosate and isoxaflutole. The isolates evaluated were D3, D16, D17, Pt24 and UFVJM04. Glyphosate concentrations were: 0, 32, 63, 127 and 254 mg L-1 in liquid medium; 0, 32, 63, 127, 254, 507 and 1014 mg L-1 in solid medium. For isoxaflutole, the concentrations were 0, 295, 589, 1178 and 2355 mg L-1 for both media. Assays were independent for each herbicide and culture medium. The tolerance of isolates depended on the herbicide and its concentration in each type of culture medium. Pt24 was the most tolerant to glyphosate and the UFVJM04 to isoxaflutole. Glyphosate was more toxic to isolates of Pisolithus than isoxaflutole.

Aspectos clínico-patológicos da intoxicação experimental por selenito de sódio em eqüinos

Dadas as controvérsias sobre a intoxicação por selênio, foram realizados nove experimentos com a administração de selenito de sódio, por via intramuscular, em eqüinos, com o intuito de estudar e melhor fundamentar os aspectos clínico-patológicos e toxicológicos sobre esse tema. Conseguiram-se produzir quadros com evoluções superaguda, aguda, subaguda e crônica; alguns sinais clínicos de origem nervosa observados nos quadros agudos foram similares aos descritos para "blind staggers"; a despeito disto, o carácter conflitante e duvidoso das descrições sobre essa pretensa entidade historicamente descrita, não permite uma comparação mais exata. O quadro crônico, por outro lado, configurou claramente a primeira reprodução de "alkali disease", por via parenteral, em eqüinos. Estabeleceu-se 1,49 mg/kg de selenito de sódio como a dose única letal para essa espécie. Descrevem-se diversos achados clínico-patológicos relativos aos sistemas cardiovascular e nervoso, antes não mencionados na literatura relativa aos eqüinos intoxicados por selênio. Entre eles, destacam-se, clinicamente, sopro e arritmia cardíacos, desdobramento de bulhas e convulsão. À necropsia, um animal apresentou nítido achatamento das circunvoluções cerebrais e, em relação à histopatologia, lise e necrose de neurônios do córtex, edema de astrócitos, bem como ativação endotelial e gliose. Em relação à patogênese, postula-se que as alterações degenerativo-necróticas observadas no sistema nervoso central, devam-se ao edema, por sua vez conseqüente ao aumento da permeabilidade vascular, determinada pelo selenito de sódio.

Enfermidades associadas à intoxicação por selênio em animais

Por meio de revisão da literatura pertinente foram coligidos e são apresentados os principais dados relativos à intoxicação por selênio em animais domésticos. Foram abordados e discutidos os aspectos epidemiológicos, clínicos, anátomo e histopatológicos e patogenéticos atribuídos a Alkali Disease, Blind Staggers, intoxicação aguda e poliomielomalácia simétrica focal dos suínos. O trabalho tem como objetivo esclarecer pontos obscuros relativos à intoxicação por selênio, bem como alertar para os riscos que a suplementação com esse elemento pode representar.

Tolerance of eucalypt (Eucalyptus spp.) seedlings to imazapyr in nutritive solution

Imazapyr has presented excellent results in controlling coppices in stand reforms of eucalypt forests, despite differences in the efficacy levels. To find out whether these different responses are caused by the genetic variability of the cultivated materials, two experiments were carried out under greenhouse conditions with different imazapyr doses in a hydroponic system in plastic vases containing 2,500 mL solution. The clones IEF-1 (Eucalyptus grandis x Eucalyptus sp. hybrid), GE 463 (E. urophylla x E. grandis), and MN 445 (E. grandis x Eucalyptus sp. hybrid) were used in the first assay, and IEF-1, IEF2 (E. grandis x E. urophylla) x Eucalyptus sp. hybrid) and the clones 129 and 7182 (E. grandis x Eucalyptus sp. hybrids) in the second assay. Thirty days after transplanting the seedlings to a nutritive solution, imazapyr was applied to the solution at doses of 0.00, 0.05, 0.10, 0.20, 0.40, 0.80, 1.60 and 3.20 muL L-1. Clone GE 463 proved to be more tolerant to imazapyr than clones IEF-1 and MN 445 in the first assay; however, in the second, clone 7182 was the most tolerant. Thus, doses should also be differentiated when controlling coppices, according to the cultivated clone.

Influence of environmental factors on seed germination and seedling emergence of yellow sweet clover (Melilotus officinalis)

Laboratory and greenhouse experiments were conducted to determine the effects of drought and salinity stress, temperature, pH and planting depth on yellow sweet clover (Melilotus officinalis) germination and emergence. Base, optimum and ceiling germination temperatures were estimated as 0, 18.47 and 34.60 ºC, respectively. Seed germination was sensitive to drought stress and completely inhibited at a potential of -1 MPa, but it was tolerant to salinity. Salinity stress up to 90 mM had no effect over the M. officinalis seed germination, but the germination decreased by increasing the salt concentration. The drought and salinity required for 50% inhibition of maximum germination were 207 mM and -0.49 MPa, respectively. High percentage of seed germination (>92%) was observed at pH = 5-6 and decreased to 80% at acidic medium (pH 4) and to 42% at alkaline medium (pH 9) pH. Maximum seedling emergence occurred when the seeds were placed at 2 cm depth and decreased when increasing the depth of planting; no seed emerged from depths of 10 cm.

Influence of seed size and ecological factors on the germination and emergence of field bindweed (Convolvulus arvensis)

An understanding of seed germination ecology of weeds can assist in predicting their potential distribution and developing effective management strategies. Influence of environmental factors and seed size on germination and seedling emergence of Convolvulus arvensis (field bindweed) was studied in laboratory and greenhouse conditions. Germination occurred over a wide range of constant temperatures, between 15 and 40 ºC, with optimum germination between 20 and 25 ºC. Time to start germination, time to 50% germination and mean germination time increased while germination percentage and germination index decreased with an increase in temperature from 20 ºC, salinity and osmotic stress. However, germination was tolerant to low salt (25 mM) or osmotic stress (0.2 MPa), but as salinity and osmotic stress increased, germination percentage and germination index decreased. Seeds of C. arvensis placed at soil surface showed maximum emergence and decreased as seeding depth increased. Seeds of C. arvensis germinated over a wide range of pH (4 to 9) but optimum germination occurred at pH 6 to 8. Under highly alkaline and acidic pH, time to start germination, time to 50% germination and mean germination time increased while germination percentage and germination index decreased. Increase in field capacity caused decreased time to start germination, time to 50% germination and mean germination time but increased germination percentage and germination index. Bigger seeds had low time to start germination, time to 50% germination and mean germination time but high germination percentage and germination index. Smaller seeds were more sensitive to environmental factors as compared to larger or medium seeds. It can be concluded that except for pH, all environmental factors and seed sizes adversely affect C. arvensis as regards seed germination or emergence and germination or emergence traits, and larger seeds result in improved stand establishment and faster germination than small seeds, regardless of moisture stress or deeper seeding depth.

Seed germination and seedling emergence of velvetleaf (Abutilon theophrasti) and Barnyardgrass (Echinochloa crus-galli)

Abutilon theophrasti and Barnyardgrass (Echinochloa crus-galli) are major weeds that affect cropping systems worldwide. Laboratory and greenhouse studies were conducted to determine the effects of temperature, pH, water and salinity stress, and planting depth on seed germination and seedling emergence of Velvetleaf and Barnyardgrass. For Velvetleaf, the base, optimum and ceiling germination temperatures were estimated as 5, 35 and 48 ºC, respectively. Seed germination was sensitive to drought stress and completely inhibited by a potential of -0.6 MPa, but it was tolerant to salinity. Salinity stress up to 45 mM had no effect on the germination of Velvetleaf, but germination decreased with increasing salt concentration. Drought and salinity levels for 50% inhibition of maximum germination were -0.3 MPa and 110 mM, respectively. Seed germination of Velvetleaf was tolerant to a wide range of pH levels. For Barnyardgrass, the base, optimum and ceiling germination temperatures were estimated as 5, 38 and 45 ºC, respectively. Seed germination was tolerant to drought stress and completely inhibited by a potential of -1.0 MPa. Salinity stress up to 250 mM had no effect on seed germination. Drought and salinity levels for 50% inhibition of maximum germination were -0.5 MPa and 307 mM, respectively. A high percentage of seed germination was observed at pH=5 and decreased to 61.5% at acidic medium (pH 4) and to 11% at alkaline medium (pH 9). Maximum seedling emergence of Velvetleaf and Barnyardgrass occurred when the seeds were placed on the surface of the soil or at a depth of 1 cm.

Tolerance of sugarcane cultivars to chemical eradication

Knowledge of the minimum rate of glyphosate required to eradicate sugarcane ratoons can reduce the amount of herbicide used. To confirm this hypothesis, this study aimed to investigate the tolerance of different sugarcane cultivars to chemical eradication, at different glyphosate rates. The experiment was conducted in a randomized block design in a split-plot scheme, with four replications. The sugarcane cultivars (IACSP94-2094, IACSP94-2101, IACSP93-3046, IACSP94‑4004, IAC86-2480, and RB72454) were allocated in plots and the glyphosate rates (0, 1,440, 2,160, 2,880, 3,600, and 4,320 g ha-1), in the sub plots. The traits evaluated were signs of poisoning symptoms; total chlorophyll content, plant height, percentage of dead tillers, and dry weight of the plants. At 45 days after application (DAA), the glyphosate rate of 1,440 g a.e. ha-1 eradicated the cultivars IACSP94-2094 and IACSP94-2101, as well as RB72454 with application of 2,160 g a.e. ha‑1. Application of glyphosate 2,880 g a.e. ha-1 eradicated both IACSP93-3046 and IAC86-2480 and glyphosate 3,600 g a.e. ha-1 eradicated IACSP94-4004. The most tolerant cultivar was IACSP94‑4004, eradicated at the rate of 3,600 g. a.e. ha-1. This confirms the hypothesis that knowing the cultivar's tolerance leads, in practice, to a smaller amount of herbicide applied to the environment, which also reduces production costs.

Mefenpyr-diethyl action on fenoxaprop-p-ethyl detoxification in wheat varieties

Safeners protect crops against herbicide injury. The aim of this study was to examine the differential susceptibility of five wheat (Triticum aestivum) varieties to the herbicide fenoxaprop-p-ethyl, as well as the performance of mefenpyr-diethyl on minimizing herbicide injury and on lipid contents. Varieties BRS 49, CD 104, CEP 24, IAPAR 78 and Rubi were sprayed with fenoxaprop-p-ethyl (69 g ha¹), fenoxaprop-p-ethyl + mefenpyr-diethyl (69 g + 18.75 g ha-1), or mefenpyr-diethyl (18.75 g ha-1). Plants were evaluated visually for injury at 7 and 14 days after treatment (DAT). Glutathione S-transferase (GST) activity was assayed in aerial parts at 7 DAT, and lipid content was measured at 14 DAT. Varieties CEP 24, IAPAR 78 and Rubi were more tolerant to fenoxaprop-p-ethyl than BRS 49, and CD 104 rapidly recovering from the slight phytotoxicity symptoms produced by the herbicide. Mefenpyr-diethyl prevented crop injury associated with the herbicide. GST activity did not correlate directly with fenoxaprop-p-ethyl detoxification. However, lipid content was related to the susceptibility of wheat to fenoxaprop-p-ethyl treatment.

Limited occurrence of resistant radish (Raphanus sativus) to AHAS-inhibiting herbicides in Argentina

Radish has developed feral and weedy biotypes, which is a concern for agriculture around the world. In Argentina, it is one of the most widespread and troublesome crop weeds. In Brazil, this species has developed herbicide-resistance to acetohydroxyacid synthase (AHAS) inhibiting herbicides. The objective of this study was to record the presence of herbicide-resistant weedy radish plants in Argentina. In spring 2008, we found a small population of radish at the end of the flowering stage in an imidazolinone-tolerant canola field treated with imazethapyr. Screening and dose-response tests were conducted to two successive generations. They proved the biotype resistant status, and showed extensive survival (between 50 and 80% of control) to the application of a double dose of four AHAS‑inhibiting herbicides from two different chemical families (imidazolinones and sulfonylureas). Dose-response assays exhibited very high resistance for imazethapyr (LD50 = 2452.5 g a.i. ha-1, GR50 = 2926.9 g a.i. ha-1) and intermediate for metsulfuron (LD50 = 3.0 g a.i. ha-1, GR50 = 43.2 g a.i. ha-1). The acquisition of cross-resistance to different herbicide families would confer an adaptive and invasive advantage in agricultural environments to this biotype. Due to the herbicide rotation conducted in the field, the dispersion of this biotype was restricted. This is the first report of resistance in weedy radish in Argentina.

Potential of plant species for bioremediation of soils applied with imidazolinone herbicides

Imidazolinone herbicides present physicochemical characteristics that allow them to persist longer in environment, with increased chances of soil and water contamination, as well as carryover effects on subsequent crops. Phytoremediation is shown as a promising technique to decontaminate soils polluted by herbicides. The aim of this study was to assess the potential of some winter grown species in removing residuals from soils contaminated with imazethapyr + imazapic and imazapic + imazapyr, using pre-emergence to control weeds in summer grown rice fields. The experiment was conducted in a completely randomized design, with four replications. All species were subjected to herbicide application at different doses. Imazethapyr + imazapic and imazapyr + imazapic were applied at doses of 0.0, 1.0 and 2.0 L ha-1, and 0.0, 140 and 280 g ha-1, respectively, in pre-emergence of the species. Brassica napus and Festuca arundinaceae are not tolerant to herbicides, with 100% of phytotoxicity (plant death) for all doses assessed. The herbicide imazapyr + imazapic proved to be less selective, causing the highest phytotoxicity in the species tested. The most tolerant species to the herbicides was Vicia sativa, which may be the most suitable one for phytoremediation programs in areas contaminated with imazethapyr + imazapic and imazapyr + imazapic.

Herbicide efficacy on Borreria densiflora control in pre- and post-emergence conditions

The weed Borreria densiflora is a management issue in soybean and sugarcane crops from North and Northeastern Brazil. Knowledge upon chemical control of B. densiflora contributes to the integrated management of this weed species, especially when active ingredient options become reduced due to the selection of herbicide resistant or tolerant weed species. Experiments in pre- and post-emergence of B. densiflora were conducted in greenhouse, in a randomized block design and four replications. In pre-emergence, the dose-response curve methodology was used and 7 herbicides were tested. In post-emergence, 9 herbicides at the recommended rate and 4 herbicide mixtures were tested. For pre and post-emergence conditions, evaluations were conducted at 60 and 21 days after treatment (DAT), respectively, and the variables analyzed were weed control and dry weight (%). The results showed options of pre-emergent herbicides that can be used for controlling B. densiflora, especially in sugarcane, where chemical weed control is mainly based on pre-emergent applications. In the current glyphosate resistance scenario, one should consider the use of pre-emergent herbicides within an integrated management of B. densiflora. For satisfactory post-emergence control, B. densiflora plants should be sprayed at the phenological stage of up to three pairs of leaves. Herbicide mixtures have been and will continue to be an important tool in chemical weed management, broadening the spectrum of weed control, while diversifying herbicide mechanisms of action, which helps to prevent or delay the appearance of herbicide resistance.

Chemical control of different Digitaria insularis populations and management of a glyphosate-resistant population

This study aimed to control different populations of Digitaria insularisby glyphosate herbicide, isolated and mixed, besides the combination of methods (chemical and mechanical) to manage resistant adult plants. Three experiments were conducted, one in pots which were maintained under non-controlled conditions and two under field conditions. In the experiment in pots, twelve populations of D. insularis were sprayed with isolated glyphosate (1.44 and 2.16 kg a.e. ha-1) and mixed (1.44 and 2.16 kg a.e. ha-1) with quizalofop-p tefuryl (0.12 kg i.a. ha-1). The treatment of 1.44 kg a.e. ha-1 of glyphosate plus 0.12 kg a.i. ha-1 of quizalofop was sufficient for adequate control (>95%) of all populations. Population 11 (area of grain production in Itumbiara, GO) was considered sensitive to glyphosate. Others populations were moderately sensitive or tolerant to the herbicide. In the field, the plants of D. insularis of one of the experiments were mowed and, in the other, there were not. Eight treatments with herbicides [isolated glyphosate (1.44 and 2.16 kg a.e. ha-1) and mixed (1.44 and 2.16 kg a.e. ha-1) with quizalofop-p-tefuryl at 0.12 kg a.i. ha-1), clethodim at 0.108 kg a.i. ha-1) or nicosulfuron at 0.06 kg a.i. ha-1)] were assessed, in combination with or without sequential application of the standard treatment, sprayed 15 days after the first application. The combination of the mechanic control with the application of glyphosate (2.16 and 1.44 kg a.e. ha-1) plus quizalofop-p-tefuryl (0.12 kg a.i. ha-1) or clethodim (0.108 kg a.i. ha-1), associated to the sequential application, was the most effective strategy for the management of adult plants of resistant D. insularis.