Efeitos do sexo, do vigor e do tamanho da planta hospedeira sobre a distribuição de insetos indutores de galhas em Baccharis pseudomyriocephala Teodoro (Asteraceae)

Several hypotheses have been proposed to explain the patterns of host plant utilization by herbivorous insects in natural communities. We tested four hypotheses aiming to understand the pattern of attack by gall-inducing insects on the dioecious shrub, Baccharis pseudomyriocephala (Asteraceae). The shrub occurs in the Parque Estadual do Itacolomi, Southeastern Brazil, and supports ten species of galling insects. The following hypotheses were tested: i) male plants are more attacked by galling insects than female plants; ii) larger plant modules are preferentially attacked by galling insects; iii) galling insects perform better on larger modules than on smaller modules; iv) galling insects increase in abundance with meristematic availability. To address these questions, 240 plants (120 of each sex) were sampled in both reproductive and vegetative periods. We recorded the growth rate (4 cm), inflorescence and fruit production, attack rates of the galling insects, and their survivorship and mortality per shoot (module). Modules were separated into size classes (cm) and analyzed by regressions and ANCOVAs. Module size and reproductive effort were positively correlated with host plant size. We did not observe any effect of host plant gender on either variables. In the same way, host plant sex did not show any influence on the abundance and richness of galling insects. Although the abundance of galling insects showed a positive correlation with shoot size, the trend disappeared when the analyses were performed taking into consideration the number of galls per unit of growth (number of galls/cm of shoot) or biomass (number of galls/dry weight). Larval survivorship was not influenced by shoot size. Also, we observed that the abundance of one species of hemipteran galling insect showed a positive relation with leaf biomass. Therefore, we conclude that gender and vigor of this plant species do not influence the community structure of its galling herbivores.

Developmental time of immature forms of Sabethes aurescens Lutz (Diptera, Culicidae) from artificially perforated bamboo in the rain forest of southern Brazil

The development time of the immature forms of Sabethes aurescens Lutz, 1905, from perforated bamboo in the southern Brazil rain forest was studied under laboratory conditions. Mean development periods were 5±2.23, 10±5.20, 14±8.26, 36±13.90 and 9±2.43 days, respectively, for the four larval instars and pupae. The 4th instar of females was longer than that of males. Implications of the long development time of the immature forms of Sa. aurescens are discussed.

Evaluation of oviposition traps as an entomological surveillance method for Aedes aegypti (Diptera, Culicidae)

This study aimed to describe the behavior of oviposition traps for Aedes aegypti over time, to compare it with the larval survey and to investigate the association with climatic variables. It was conducted in São José do Rio Preto city, São Paulo. Daily climatic data and fortnightly measurements for oviposition traps and larval infestation were collected from October 2003 to September 2004. Three different periods were identified in the behavior of oviposition traps' positivity and mean number of eggs: increase, plateau and decrease in values. These measurements followed the variation of climatic data from the first and third periods. High correlation was obtained between the positivity and the mean number of eggs. The oviposition traps showed higher capacity to detect the vector than did larval survey. It was observed that the first (October to December) and third (May to September) periods were considered to be the most suitable to use oviposition traps than larval surveys.

Nutritional ecology of blowflies (Diptera, Calliphoridae): estimates of critical larval weight for pupation on two different

Under natural environmental conditions, blowflies utilize discrete and ephemeral feeding resources such as decaying carcasses. Competition for food on such feeding substrates is usually very severe, and only the individuals that are capable of attaining the critical larval weight for pupation will be able to survive. This critical weight is hitherto unknown for several blowfly species; therefore, the current work is aimed at obtaining such a critical value for four blowfly species of the genera Chrysomya and Lucilia, deploying two types of feeding substrate, namely, artificial diet and macerated bovine meat. On the whole, the critical weights ranged from 30 to 35 mg. The lowest larval weight which permitted pupation was 30.0 mg for Chrysomya megacephala reared on macerated bovine meat. This species was also the best adapted to pupation at low larval weights in relation to the maximum larval weight for males. Regarding the pupation of females, the best-adapted individual was a C. albiceps specimen exhibiting a critical weight that was equal to 39.20 % of the maximum value obtained. Concerning all the species and diet types, the female individuals exhibited the lowest critical weights that produced viable pupae, probably representing an evolutionary strategy that favoured the survival of females, responsible for the egg formation, contributing to the establishment of future generations. Regarding the loss (in percentage) of adult biomass in relation to the third instar larvae, the females of C. megacephala lost less weight than males in both feeding substrates. On the other hand, such a loss of weight occurred in males of C. albiceps and L. cuprina.

Can larval lacewings Chrysoperla externa (Hagen): (Neuroptera, Chrysopidae) be reared on pollen?

The aim of this study was to verify the viability of exclusive use of elephant grass pollen, Pennisetum purpureum (Schum), to feed larvae of the lacewing Chrysoperla externa (Hagen, 1861). The insects were kept at 24ºC and the duration and survival rate of each instar and the larval and pupal phases were recorded. The diet provided complete development of the larvae. The average duration of the first and second instars was the same (6.9 days), while the third instar lasted an average of 10.0 days and the pupal phase 13.2 days. The average survival of the larvae was above 80% for the first, second and third instars, and 70.0% and 33.3% for the larval and pupal phase, respectively. These results indicate that the exclusive use of elephant grass pollen can provide complete development of the immature stages of this predator.

Temporal distribution of Aedes aegypti Linnaeus (Diptera, Culicidae), in a Hospital in Cuiabá, State of Mato Grosso, Brazil

This study aimed at registering and monitoring the presence of Aedes aegypti in the University Hospital Júlio Muller, Cuiabá-MT, as well as investigating the influence of temperature and rainfall on its temporal distribution and egg densities in ovitraps. The study was performed from April/2007 to March/2008, utilizing ovitraps with 10% of hay infusion and a wood paddle as an oviposition substrate. For surveillance, one ovitrap was placed in each of the 12 points distributed throughout the hospital. Ovitraps were collected monthly at the end of a 5-day installation period. After egg counting, wood paddles were immersed in water to allow larval eclosion for species identification through optical microscopy. Egg Density Index (EDI), Positive Ovitraps Index (POI), and Mean Number of Eggs (MNE) were used for data analysis. The presence of A. aegypti in the hospital was registered throughout the study period, except in July. The MNE was proportionally higher in the internal area (n= 8.47 eggs/paddle) when compared to the external area (n= 5.46 eggs/paddle), and was higher in September/October 2007 and January/February 2008. A significant increase in EDI, POI and MNE was registered in periods where the average temperature was higher, and the increase in POI was also concomitant with an increase in rainfall. The continuous presence of A. aegypti in the hospital throughout the study period, points out the need of including this mosquito in the arthropod control list in this environment. This is particularly important, considering that A. aegypti is an important vector of several arboviroses.

Bionomic data and larval density of Scarabaeidae (Pleurosticti) in sugarcane in the central region of Mato Grosso do Sul, Brazil

Bionomic data and larval density of Scarabaeidae (Pleurosticti) in sugarcane in the central region of Mato Grosso do Sul, Brazil. Phytophagous larvae of Scarabaeidae cause damage to diverse crops. Information on these pests is scarce; therefore, the objective of this study was to determine biological aspects and larval density of species occurring in an area of sugarcane. The studies were developed in Sidrolândia from April 2009 to March 2010. Scarab beetle larvae were collected in sugarcane roots every fifteen days, taken to the laboratory and reared to obtain the adults and determine biological parameters. A total of 2,656 larvae were collected, being 162 Liogenys fuscus, 120 Cyclocephala verticalis, 37 Cyclocephala forsteri, and 2337 Anomonyx sp. In January, 53.65 larvae m-2 were obtained, and the most abundant species was Anomonyx sp, representing 87.99% of the total larvae collected. From November to March, the greatest densities of Anomonyx were observed in the field. The adults of this species occurred from May to September, and egg laying from September to November. Eggs measured 1.1 x 1.7 mm, and incubation period last 15.4 days. First instar larvae were observed mainly in October; second instar larvae from November to April; and third instar from January to July. Pupae were observed from May to August. The most abundant scarab beetle, Anomonyx sp. in roots of sugarcane presents one generation per year in Sidrolândia, MS.

Description of the third larval instar and pupa of Geniates barbatus Kirby (Coleoptera, Scarabaeidae, Rutelinae)

Description of the third larval instar and pupa of Geniates barbatus Kirby (Coleoptera, Scarabaeidae, Rutelinae). The last larval instar and pupa of the Neotropical Geniatini Geniates barbatus Kirby, 1819 are described and illustrated. Biological notes and a key to the third instar larvae of Neotropical Rutelinae are also provided.

New method for rearing Spodoptera frugiperda in laboratory shows that larval cannibalism is not obligatory

New method for rearing Spodoptera frugiperda in laboratory shows that larval cannibalism is not obligatory. Here we show, for the first time, that larvae of the fall armyworm (FAW), Spodoptera frugiperda (Lepidoptera, Noctuidae), can be successfully reared in a cohort-based manner with virtually no cannibalism. FAW larvae were reared since the second instar to pupation in rectangular plastic containers containing 40 individuals with a surprisingly ca. 90% larval survivorship. Adult females from the cohort-based method showed fecundity similar to that already reported on literature for larvae reared individually, and fertility higher than 99%, with the advantage of combining economy of time, space and material resources. These findings suggest that the factors affecting cannibalism of FAW larvae in laboratory rearings need to be reevaluated, whilst the new technique also show potential to increase the efficiency of both small and mass FAW rearings.

Larval development of Physocephala (Diptera, Conopidae) in the bumble bee Bombus morio (Hymenoptera, Apidae)

Larval development of Physocephala (Diptera, Conopidae) in the bumble bee Bombus morio (Hymenoptera, Apidae). In the summer of 2012, a high incidence of conopid larvae was observed in a sample of female B. morio collected in remaining fragments of semidecidual forest and Cerrado, in the municipality of Sorocaba, state of São Paulo, Brazil. The larval development of conopid flies was studied, beginning at the larval instars (LO to L3) and PUP, until the emergence of the imago under laboratory conditions and inside the host. At the first instar, or LO, the microtype larvae measured less than 1 mm in length. During the transition from L1 to L3, the larvae grew in length. At L3, the larvae doubled their length (4 mm) and then started to develop both in length and width, reaching the PUP stage with 10 mm in length and 7 mm in width. The main characteristic that differentiates L3 from the early instars is the larger body size and the beginning of posterior spiracle development. The development from PUP to puparium took less than 24h. The bees died ten days after the fly oviposition, or just before full PUP development. The early development stages (egg-LO to L1) were critical for larva survival. The pupa was visible between the intersegmental sternites and, 32 days after pupation, a female imago of Physocephala sp. emerged from one bee. The puparium and the fly measured approximately 10 mm in length. In a single day of collection, up to 45% of the bumble bees collected were parasitized by conopid flies.

Larval development of Spodoptera eridania (Cramer) fed on leaves of Bt maize expressing Cry1F and Cry1F + Cry1A.105 + Cry2Ab2 proteins and its non-Bt isoline

This study aimed to evaluate, in controlled laboratory conditions (temperature of 25±2 °C, relative humidity of 60±10%, and 14/10 h L/D photoperiod), the larval development of Spodoptera eridania (Cramer, 1784) (Lepidoptera, Noctuidae) fed with leaves of Bt maize expressing Cry1F and Cry1F + Cry1A.105 + Cry2Ab2 insecticide proteins and its non-Btisoline. Maize leaves triggered 100% of mortality on S. eridania larvae independently of being Bt or non-Bt plants. However, it was observed that in overall Bt maize (expressing a single or pyramided protein) slightly affects the larval development of S. eridania, even under reduced leaf consumption. Therefore, these results showed that Cry1F and Cry1F + Cry1A.105 + Cry2Ab2 can affect the larval development of S. eridania, although it is not a target pest of this plant; however, more research is needed to better understand this evidence. Finally, this study confirms that non-Bt maize leaves are unsuitable food source to S. eridania larvae, suggesting that they are not a potential pest in maize fields.

Spatial and temporal dynamics of drosophilid larval assemblages associated to fruits

The study of organisms and their resources is critical to further understanding population dynamics in space and time. Although drosophilids have been widely used as biological models, their relationship with breeding and feeding sites has received little attention. Here, we investigate drosophilids breeding in fruits in the Brazilian Savanna, in two contrasting vegetation types, throughout 16 months. Specifically, larval assemblages were compared between savannas and forests, as well as between rainy and dry seasons. The relationships between resource availability and drosophilid abundance and richness were also tested. The community (4,022 drosophilids of 23 species and 2,496 fruits of 57 plant taxa) varied widely in space and time. Drosophilid assemblages experienced a strong bottleneck during the dry season, decreasing to only 0.5% of the abundance of the rainy season. Additionally, savannas displayed lower richness and higher abundance than the forests, and were dominated by exotic species. Both differences in larval assemblages throughout the year and between savannas and gallery forests are consistent with those previously seen in adults. Although the causes of this dynamic are clearly multifactorial, resource availability (richness and abundance of rotten fruits) was a good predictor of the fly assemblage structure.

Soil phosphorus fractions in sandy soils amended with cattle manure for long periods

Phosphorus fractions were determined in soil samples from areas fertilized or not with farmyard cattle manure (FYM) and in samples of FYM used in the semi-arid region of Paraiba state, Brazil. Soil samples were taken from the 0-20; 20-40 and 40-60 cm layers of 18 cultivated areas, which, according to interviews with farmers, had been treated with 12 to 20 t ha-1 FYM annually, for the past 2 to 40 years. Soil samples were also collected from four unfertilized pasture areas as controls. Phosphorus in the soil samples was sequentially extracted with water (Pw), resin (Pres), NaHCO3 (Pi bic and Po bic), NaOH (Pi hid and Po hid), H2SO4 (Pacid) and, finally, by digestion with H2SO4/H2O2 (Presd). Nine FYM samples were extracted with water, resin, Mehlich-1, H2SO4, NaOH or digestion with H2SO4/H2O2, not sequentially, and the extracts analyzed for P. The sampled areas had homogeneous, sandy and P-deficient soils; increases in total soil P (Pt) above the mean value of the control areas (up to 274 mg kg-1 in the 0-20 cm layer of the most P-enriched samples) were therefore attributed to FYM applications, which was the only external P input in the region. Regression analysis was used to study the relationship between soil P fractions and Pt. The Pacid fraction, related to Ca-P forms, showed the greatest increases (p < 0.01) as a result of FYM applications, rising from 8.4 mg kg-1 in a non-fertilized sample to 43.8 mg kg-1 in the sample with the highest Pt content. The sum of Pw, Pres and Pi bic, considered as labile P, showed comparable increases with Pacid, while Pi hid showed the smallest increase due to FYM applications. Organic P forms also increased, more so the fraction Po hid, considered less labile, than the more labile one, Po bic. The residual P fraction was practically half of Pt, independently of the Pt value. Increases in labile P, Pacid and organic P were justified by the high average concentration of Pw (36 %), Pacid (34 %), and Po hid (30 %) in the FYM. Significant changes in the proportion of P forms among soil layers indicated the downward movement of P in organic forms.

Phosphorus extracted by ion exchange resins and mehlich-1 from oxisols (latosols) treated with different phosphorus rates and sources for varied soil-source contact periods

Despite the large number of studies addressing the quantification of phosphorus (P) availability by different extraction methods, many questions remain unanswered. The aim of this paper was to compare the effectiveness of the extractors Mehlich-1, Anionic Resin (AR) and Mixed Resin (MR), to determine the availability of P under different experimental conditions. The laboratory study was arranged in randomized blocks in a [(3 x 3 x 2) + 3] x 4 factorial design, with four replications, testing the response of three soils with different texture: a very clayey Red Latosol (LV), a sandy clay loam Red Yellow Latosol (LVA), and a sandy loam Yellow Latosol (LA), to three sources (triple superphosphate, reactive phosphate rock from Gafsa-Tunisia; and natural phosphate from Araxá-Minas Gerais) at two P rates (75 and 150 mg dm-3), plus three control treatments (each soil without P application) after four contact periods (15, 30, 60, and 120 days) of the P sources with soil. The soil acidity of LV and LVA was adjusted by raising base saturation to 60 % with the application of CaCO3 and MgCO3 at a 4:1 molar ratio (LA required no correction). These samples were maintained at field moisture capacity for 30 days. After the contact periods, the samples were collected to quantify the available P concentrations by the three extractants. In general, all three indicated that the available P-content in soils was reduced after longer contact periods with the P sources. Of the three sources, this reduction was most pronounced for triple superphosphate, intermediate for reactive phosphate, while Araxá phosphate was least sensitive to the effect of time. It was observed that AR extracted lower P levels from all three soils when the sources were phosphate rocks, while MR extracted values close to Mehlich-1 in LV (clay) and LVA (medium texture) for reactive phosphate. For Araxá phosphate, much higher P values were determined by Mehlich-1 than by the resins, because of the acidity of the extractor. For triple superphosphate, both resins extracted higher P levels than Mehlich-1, due to the consumption of this extractor, particularly when used for LV and LVA.

Physical quality of an Oxisol after different periods of management systems

Management systems may lead to a loss of soil physical quality as a result of removal of the plant cover and excessive agricultural mechanization. The hypothesis of this study was that the soil aggregate stability, bulk density, macro- and microporosity, and the S index and saturated hydraulic conductivity may be used as indicators of the soil physical quality. The aim was to study the effects of different periods and managements on the physical attributes of a medium-textured Red Oxisol under soybean and corn for two growing seasons, and determine which layers are most susceptible to variations. A completely randomized experimental design was used with split plots (five treatments and four layers), with four replications. The treatments in 2008/09 consisted of: five years of no-tillage (NTS5), seven years of no-tillage (NTS7), nine years of no-tillage (NTS9), conventional tillage (CTS) and an adjacent area of native forest (NF). The treatments were extended for another year, identified in 2009/10 as: NTS6, NTS8, NTS10, CTS and NF. The soil layers 0-0.05, 0.05-0.10, 0.10-0.20 and 0.20-0.30 m were sampled. The highest S index values were observed in the treatment CTS in the 0-0.05 m layer (0.106) and the 0.05-0.10 m layer (0.099) in 2008/09, and in the 0-0.05 m layer (0.066) in 2009/10. This fact may be associated with soil turnover, resulting in high macroporosity in this treatment. In contrast, in the NTS, limiting macroporosity values were observed in some layers (below 0.10 m³ m-3). Highest aggregate stability as well as the highest saturated hydraulic conductivity (Kθ) values were observed in NF in relation to the other treatments. In 2009/10, the Kθ in NF differed only from NTS10. This study showed that the use of the S index alone cannot be recommended as an absolute indicator of the soil physical quality, even at values greater than 0.035.