Schistosomiasis control program in the state of Minas Gerais in Brazil

The Schistosomiasis Control Program (PCE) was implemented in Minas Gerais (MG) in 1984. In 1999, the state started the investigation and control of schistosomiasis in 470 municipalities. The aim of the present paper is to report the evolution of this Program from 1984-2007. The program included a coproscopic survey carried out in the municipalities of known endemic areas using a quantitative method. Positives were treated with praziquantel and given a program of health education. The information for this study was obtained from data collected and stored by the Health State Department. From 2003-2007, 2,643,564 stool examinations resulted in 141,284 positive tests for Schistosoma mansoni (5.3%). In the first evaluation after treatment, a decrease in the number of municipalities with prevalence over 10% was documented. In one village, selected for a more detailed evaluation, the percentage of positive tests decreased from 14.9% in the baseline survey to 5.3% after treatment. A reference centre for patients with severe schistosomiasis was created in Belo Horizonte, MG. Based on our findings, we believe that the implementation of PCE in MG is on the right path and in due time these new initiatives will provide desirable results.

Review of semiochemicals that mediate the oviposition of mosquitoes: a possible sustainable tool for the control and monitoring of Culicidae

The choice for suitable places for female mosquitoes to lay eggs is a key-factor for the survival of immature stages (eggs and larvae). This knowledge stands out in importance concerning the control of disease vectors. The selection of a place for oviposition requires a set of chemical, visual, olfactory and tactile cues that interact with the female before laying eggs, helping the localization of adequate sites for oviposition. The present paper presents a bibliographic revision on the main aspects of semiochemicals in regard to mosquitoes' oviposition, aiding the comprehension of their mechanisms and estimation of their potential as a tool for the monitoring and control of the Culicidae.

Influence of different tropical fruits on biological and behavioral aspects of the Mediterranean fruit fly Ceratitis capitata (Wiedemann) (Diptera, Tephritidae)

Influence of different tropical fruits on biological and behavioral aspects of the Mediterranean fruit fly Ceratitis capitata (Wiedemann) (Diptera, Tephritidae). Studies on Ceratitis capitata, a world fruit pest, can aid the implementation of control programs by determining the plants with higher vulnerability to attacks and plants able to sustain their population in areas of fly distribution. The objective of the present study was to evaluate the influence of eight tropical fruits on the following biological and behavioral parameters of C. capitata: emergence percentage, life cycle duration, adult size, egg production, longevity, fecundity, egg viability, and oviposition acceptance. The fruits tested were: acerola (Malpighia glabra L.), cashew (Anacardium occidentale L.), star fruit (Averrhoa carambola L.), guava (Psidium guajava L.), soursop (Annona muricata L.), yellow mombin (Spondias mombin L.), Malay apple (Syzygium malaccense L.), and umbu (Spondias tuberosa L.). The biological parameters were obtained by rearing the recently hatched larvae on each of the fruit kinds. Acceptance of fruits for oviposition experiment was assessed using no-choice tests, as couples were exposed to two pieces of the same fruit. The best performances were obtained with guava, soursop, and star fruit. Larvae reared on cashew and acerola fruits had regular performances. No adults emerged from yellow mombin, Malay apple, or umbu. Fruit species did not affect adult longevity, female fecundity, or egg viability. Guava, soursop, and acerola were preferred for oviposition, followed by star fruit, Malay apple, cashew, and yellow mombin. Oviposition did not occur on umbu. In general, fruits with better larval development were also more accepted for oviposition.

LOW COST ANALYZER FOR THE DETERMINATION OF PHOSPHORUS BASED ON OPEN-SOURCE HARDWARE AND PULSED FLOWS

The need for automated analyzers for industrial and environmental samples has triggered the research for new and cost-effective strategies of automation and control of analytical systems. The widespread availability of open-source hardware together with novel analytical methods based on pulsed flows have opened the possibility of implementing standalone automated analytical systems at low cost. Among the areas that can benefit from this approach are the analysis of industrial products and effluents and environmental analysis. In this work, a multi-pumping flow system is proposed for the determination of phosphorus in effluents and polluted water samples. The system employs photometric detection based on the formation of molybdovanadophosphoric acid, and the fluidic circuit is built using three solenoid micropumps. The detection is implemented with a low cost LED-photodiode photometric detection system and the whole system is controlled by an open-source Arduino Uno microcontroller board. The optimization of the timing to ensure the color development and the pumping cycle is discussed for the proposed implementation. Experimental results to evaluate the system behavior are presented verifying a linear relationship between the relative absorbance and the phosphorus concentrations for levels as high as 50 mg L-1.

Implementation of a trauma registry in a brazilian public hospital: the first 1,000 patients

OBJECTIVE: Show the steps of a Trauma Registry (TR) implementation in a Brazilian public hospital and evaluate the initial data from the database.METHODS: Descriptive study of the a TR implementation in João XXIII Hospital (Hospital Foundation of the state of Minas Gerais) and analysis of the initial results of the first 1,000 patients.RESULTS: The project was initiated in 2011 and from January 2013 we began collecting data for the TR. In January 2014 the registration of the first 1000 patients was completed. The greatest difficulties in the TR implementation were obtaining funds to finance the project and the lack of information within the medical records. The variables with the lowest completion percentage on the physiological conditions were: pulse, blood pressure, respiratory rate and Glasgow coma scale. Consequently, the Revised Trauma Score (RTS) could be calculated in only 31% of cases and the TRISS methodology applied to 30.3% of patients. The main epidemiological characteristics showed a predominance of young male victims (84.7%) and the importance of aggression as a cause of injuries in our environment (47.5%), surpassing traffic accidents. The average length of stay was 6 days, and mortality 13.7%.CONCLUSION: Trauma registries are invaluable tools in improving the care of trauma victims. It is necessary to improve the quality of data recorded in medical records. The involvement of public authorities is critical for the successful implementation and maintenance of trauma registries in Brazilian hospitals.

Control of Structures with Cubic and Quadratic Non-Linearities with Time Delay Consideration

This paper studies the effect of time delay on the active non-linear control of dynamically loaded flexible structures. The behavior of non-linear systems under state feedback control, considering a fixed time delay for the control force, is investigated. A control method based on non-linear optimal control, using a tensorial formulation and state feedback control is used. The state equations and the control forces are expressed in polynomial form and a performance index, quadratic in both state vector and control forces, is used. General polynomial representations of the non-linear control law are obtained and implemented for control algorithms up to the fifth order. This methodology is applied to systems with quadratic and cubic non-linearities. Strongly non-linear systems are tested and the effectiveness of the control system including a delay for the application of control forces is discussed. Numerical results indicate that the adopted control algorithm can be efficient for non-linear systems, chiefly in the presence of strong non-linearities but increasing time delay reduces the efficiency of the control system. Numerical results emphasize the importance of considering time delay in the project of active structural control systems.

Influence of food components on lipid metabolism: scenarios and perspective on the control and prevention of dyslipidemias

Cardiovascular diseases (CVD) are the main causes of death in the Western world. Among the risk factors that are modifiable by diet, for reducing cardiovascular disease risks, the total plasma concentrations of cholesterol, triglycerides, LDL-C, and HDL-C are the most important. Dietary measures can balance these components of the lipid profile thus reducing the risk of cardiovascular diseases. The main food components that affect the lipid profile and can be modified by diet are the saturated and trans fats, unsaturated fats, cholesterol, phytosterols, plant protein, and soluble fiber. A wealth of evidence suggests that saturated and trans fats and cholesterol in the diet raise the total plasma cholesterol and LDL-C. Trans fats also reduce HDL-C, an important lipoprotein for mediating the reverse cholesterol transport. On the other hand, phytosterols, plant proteins, isoflavones, and soluble fiber are protective diet factors against cardiovascular diseases by modulating plasma lipoprotein levels. These food components at certain concentrations are able to reduce the total cholesterol, TG, and LDL-C and raise the plasma levels of HDL-C. Therefore, diet is an important tool for the prevention and control of cardiovascular diseases, and should be taken into account as a whole, i.e., not only the food components that modulate plasma concentrations of lipoproteins, but also the diet content of macro nutrients and micronutrients should be considered.