Evaluation of the throughfall and stemflow nutrient contents in mixed and pure plantations of Acacia mangium, Pseudosamenea guachapele and Eucalyptus grandis

The interception of the rainfall by the forest canopy has great relevance to the nutrient geochemistry cycle in low fertility tropical soils under native or cultivated forests. However, little is known about the modification of the rainfall water quality and hydrological balance after interception by the canopies of eucalyptus under pure and mixed plantations with leguminous species, in Brazil. Samples of rainfall (RF), throughfall (TF) and stemflow (SF) were collected and analyzed in pure plantations of mangium (nitrogen fixing tree -NFT), guachapele (NFT) and eucalyptus (non-nitrogen fixing tree -NNFT) and in a mixed stand of guachapele and eucalyptus in Seropédica, State of Rio de Janeiro, Brazil. Nine stemflow collectors (in selected trees) and nine pluviometers were randomly disposed under each stand and three pluviometers were used to measure the incident rainfall during 5.5 months. Mangium conveyed 33.4% of the total rainfall for its stem. An estimative based on corrections for the average annual precipitation (1213 mm) indicated that the rainfall's contribution to the nutrient input (kg ha-1) was about 8.42; 0.95; 19.04; 6.74; 4.72 and 8.71 kg ha-1 of N-NH4+, P, K+, Ca+2, Mg+2 and Na+, respectively. Throughfall provided the largest contributions compared to the stemflow nutrient input. The largest inputs of N-NH4+ (15.03 kg ha-1) and K+ (179.43 kg ha-1) were observed under the guachapele crown. Large amounts of Na+ denote a high influence of the sea. Mangium was the most adapted species to water competitiveness. Comparatively to pure stand of eucalyptus, the mixed plantation intensifies the N, Ca and Mg leaching by the canopy, while the inputs of K and P were lower under these plantations.

Fungi associated to bark lesions of Eucalyptus globulus stems in plantations from Uruguay

Trees with stem bark lesions are frequently observed in Eucalyptus globulus Labill. plantations, particularly in the central west region of Uruguay. These lesions constitute a problem for trunk decortications at harvest and they also facilitate the access of fungi that could cause wood decay. Seven, three and oneyear-old plantations, located at three sites in close proximity were selected. Four types of trunk lesions were present in trees regardless the age of plantation and more than one type was found in each plantation. The aim of this study was to investigate the fungal composition associated with these lesions and compare them to healthy tissues and try to find out the origin of these symptoms. Another purpose was to elucidate the real role of the fungi considered pathogens by means of experimental inoculations. Segments from lesions and healthy tissues yielded 897 fungal isolates belonging to 32 taxa, 681 isolates from bark lesions and 216 from healthy tissues. Both healthy and symptomatic tissues showed similar fungal species composition, but with differences in frequencies of colonization. Cytospora eucalypticola Van der Westhuizen, Botryosphaeria spp., Pestalotiopsis guepinii (Desm.) Stey. and Penicillium spp. were the dominant species isolated. As symptoms were not reproduced after experimental inoculation with Botryosphaeria ribis Grossenb. & Duggar and B. eucalyptorum Crous, & M.J. Wingf, it could be suggested that these lesions were originated by unfavorable environmental conditions. The frost that occurred for several days out of season and flooding may have been involved in the development of bark lesion.

Genetic transformation of Eucalyptus camaldulensis by agrobalistic method

Eucalyptus stands in the setting of worldwide forestry due to its adaptability, rapid growth, production of high-quality and low cost of wood pulp fibers. The eucalyptus convetional breeding is impaired mainlly by the long life cycle making the genetic transformation systems an important tool for this purpose. However, this system requires in vitro eficient protocols for plant induction, regeneration and seletion, that allow to obtain transgenic plants from the transformed cell groups. The aim of this work was to evaluate the callus formation and to optimize the leaves and callus genetic transformation protocol by using the Agrobacterium tumefaciens system. Concerning callus formation, two different culture media were evaluated: MS medium supplemented with auxin, cytokinin (M1) and the MS medium with reduced nitrogen concentration and supplemented with auxin, cytokinin coconut water (M2). To establish the leave genetic transformation, those were exposed to agrobiolistics technique (gene gun), to tissue injury, and A. tumesfasciens EHA 105 contening the vetor pCambia 3301 (35S::GUS::NOS), for gene transference and to establish the callus transformation thoses were exposed only to A. tumefasciens. For both experiments, the influence of different infection periods was evaluated. The M2 medium provided the best values for callus sizea and fresh and dry weight. The leaves genetic transformation using the agrobiolistics technique was effective, the gus gene transient expression could be observed. No significant differences were obtained in the infection periods (4, 6 and 8 minutes). The callus genetic transformation with A. tumefaciens also promotend the gus gene transient expression on the callus co-cultiveted for 15 e 30 minutes. The transformed callus was transfered to a regeneration and selection medium and transformed plants were obtained.

Initial growth of Bauhinia variegata trees under different colored shade nets and light conditions

Bauhinia variegata and B. variegata var. candida, commonly known as orchid trees, are small sized trees widely used for urban forestry and landscaping. Adult plants grow under full sun; in Brazil, however, seedlings are generally cultivated in commercial nurseries under natural half-shading. The objective of this study was to evaluate the influence of different colored shade nets and light conditions on the initial growth of B. variegata and B. variegata var. candida. The influence of six light conditions (red net with 50% shading; blue net with 50% shading; black net with 70% shading; black net with 50% shading; black net with 30% shading; and full sun) on the initial growth of B. variegata and B. variegata var. candida were evaluated along 160 days, and growth relationships were calculated. Seedlings showed more efficiency on the use of photoassimilated compounds when grown under full sun. Such condition is the most appropriate for seedling production of B. variegata and B. variegata var. candida, contradicting what has been performed in practice.

VEGETATIVE RESCUE AND CUTTINGS PROPAGATION OF Araucaria angustifolia (Bertol.) Kuntze

Brazilian pine or araucaria (Araucaria angustifolia) is a coniferous tree with great economic, social and environmental importance in southern Brazil, being exploited for both wood production and for its edible pine nuts. However, no efficient cloning techniques are available and, therefore, the purpose of this study was to evaluate the effectiveness of vegetative rescue methods for cuttings propagation of the species. Shoots/cuttings were generated in two ways: 26 years old trees underwent coppicing and 20 years old trees had the primary branches on the upper third of crown pruned at 2, 20 and 50 cm from the main trunk. Orthotropic shoots were rooted after application of indole-3-butyric acid (IBA) at 0, 2, 4 and 6 g.L-1. Coppicing produced 47 cuttings per plant with 90% orthotropic shoots, while pruning resulted in 182 cuttings per plant with 44% orthotropic shoots. Rooting success indexes were low with no influence of IBA, although they are slightly superior to the ones available in the literature for the species, ranging from 12 to 30% for the coppice shoots and from 0 to 28% for the branches shoots. We conclude that both vegetative rescue techniques are viable and have potentially important applications. Coppicing is recommended for the propagation aiming the production of wood, while shoots derived from the side branches of the crown are more appropriate for seeds orchards formation.

ABOVEGROUND AND BELOWGROUND BIOMASS AND CARBON ESTIMATES FOR CLONAL EUCALYPTUS TREES IN SOUTHEAST BRAZIL

Eucalyptus plantations represent a short term and cost efficient alternative for sequestrating carbon dioxide from the atmosphere. Despite the known potential of forest plantations of fast growing species to store carbon in the biomass, there are relatively few studies including precise estimates of the amount of carbon in these plantations. In this study it was determined the carbon content in the stems, branches, leaves and roots of a clonal Eucalyptus grandis plantation in the Southeast of Brazil. We developed allometric equations to estimate the total amount of carbon and total biomass, and produced an estimate of the carbon stock in the stand level. Altogether, 23 sample trees were selected for aboveground biomass assessment. The roots of 9 of the 23 sampled trees were partially excavated to assess the belowground biomass at a singletree level. Two models with DBH, H and DBH2H were tested. The average relative share of carbon content in the stem, branch, leaf and root compartments was 44.6%, 43.0%, 46.1% and 37.8%, respectively, which is smaller than the generic value commonly used (50%). The best-fit allometric equations to estimate the total amount of carbon and total biomass had DBH2H as independent variable. The root-to-shoot ratio was relatively stable (C.V. = 27.5%) probably because the sub-sample was composed of clones. Total stand carbon stock in the Eucalyptus plantation was estimated to be 73.38 MgC ha-1, which is within the carbon stock range for Eucalyptus plantations.

SOIL COVER AND CHEMICAL AND PHYSICAL ATTRIBUTES IN OXISOL IN THE ATLANTIC FOREST BIOME

ABSTRACT The objective of this study was to evaluate the chemical and physical attributes of different soil cover in a Oxisol with a strong wavy relief in the Atlantic Forest Biome, in which were selected three watersheds, employed with grazing (watershed P), forest (watershed M) and coffee (watershed C). Deformed and not deformed samples were collected in three depths for physical and chemical characterization. The chemical characteristics of soil in different watershed studies presented low levels of fertility. It was observed an elevation of pH in the soil and contents of Ca2+ and Mg2+ in the watersheds P and C in relation to the watershed M. Due to deforestation and the establishment of agriculture and livestock, there was a decrease in the contents of soil organic matter in the watershed P and C, not altering the physical characteristics of the soil in the watershed P. The implementation of coffee plantation is causing a reduction in the soil quality of watershed C in comparison to the watershed P and M, therefore indicating a need to adequate soil management in this area.

JUVENILE-MATURE GENETIC CORRELATIONS IN Pinus taeda CLONES PROPAGATED VIA SOMATIC EMBRYOGENESIS

ABSTRACT This study aimed to estimate the genetic correlation among selection ages (juvenile - adult) and efficiency of early selection for the height, diameter, and volume traits of individuals from Pinus taeda families propagated via somatic embryogenesis. This study was carried out by genetic-statistical analysis, estimation procedure of variance (Reml), and prediction components of breeding values (Blup), using the Selegen-Reml/Blup software. Genetic correlations among juvenile ages and rotation age were performed by applying the linear model developed by Lambeth (1980). In accordance with results of the established model, the early selection can be performed in clones of Pinus taeda with high selection efficiency. Ages from 4 to 6 years old are enough to select Pinus taeda clones propagated via somatic embryogenesis for harvesting at 8 and 12 years old; and 6 to 10 years old are enough to select them for harvesting at 20 years old. On the basis of the genetic correlations estimates from the environments, the clones' selection of Pinus taeda propagated via somatic embryogenesis should be developed specifically for each environment. The clones' selection can be performed considering the diameter due to the high correlation between volume and diameter.

NON-DESTRUCTIVE ANALYSIS OF THE ROOT SYSTEM AND TREE GROWTH PARAMETERS

ABSTRACT The productivity of Eucalyptus at plantations is increasing and has undergone a variety of research studies. Most research is dealing with simple dendrometric variables like the DBH (diameter at breast height) and tree height, or more complex variables including crown parameters or variables concerning photosynthesis. The root systems, however, have not been well analyzed yet. The objective of the study was to analyze the root system with a non-destructive method and to evaluate possible correlations with dendrometric variables of the tree (DBH, height, crown expansion). A small experimental plantation with 39 even-aged, 6-year-old trees of Eucalyptus grandis x urophylla has been investigated within this study. The results of the study show the highest correlation of the root areas with the crown expansion. In general, the root area shows a significantly bigger expansion in the eucalypt plantation than the tree crown, with a more homogeneous development.

CLASSIFICATION OF FOREST ROADS AND DETERMINATION OF ROUTE USING GEOGRAPHIC INFORMATION SYSTEM

ABSTRACT Geographic Information System (GIS) is an indispensable software tool in forest planning. In forestry transportation, GIS can manage the data on the road network and solve some problems in transportation, such as route planning. Therefore, the aim of this study was to determine the pattern of the road network and define transport routes using GIS technology. The present research was conducted in a forestry company in the state of Minas Gerais, Brazil. The criteria used to classify the pattern of forest roads were horizontal and vertical geometry, and pavement type. In order to determine transport routes, a data Analysis Model Network was created in ArcGIS using an Extension Network Analyst, allowing finding a route shorter in distance and faster. The results showed a predominance of horizontal geometry classes average (3) and bad (4), indicating presence of winding roads. In the case of vertical geometry criterion, the class of highly mountainous relief (4) possessed the greatest extent of roads. Regarding the type of pavement, the occurrence of secondary coating was higher (75%), followed by primary coating (20%) and asphalt pavement (5%). The best route was the one that allowed the transport vehicle travel in a higher specific speed as a function of road pattern found in the study.

BIOMASS SUPPLY CHAIN ANALYSIS WITH DENSIFIED WASTE

ABSTRACT The possibility to vary the energy matrix, thus reducing the dependency on fossil fuels, has amplified the acceptance of biomass as an alternative fuel. Despite being a cheap and renewable option and the fact that Brazil is a major producer of waste from agriculture and forestry activities, the use of these materials has barriers due to its low density and low energetic efficiency, which can raise the costs of its utilization. Biomass densification has drawn attention due to its advantage in comparison to in natura biomass due to its better physical and combustion characteristics. The objective of this paper is to evaluate the impact of biomass densification in distribution and transport costs. To reach this objective, a mathematical model was used to represent decisions at a supply chain that coordinates the purchase and sale of forestry and wood waste. The model can evaluate the options to deliver biomass through the supply chain combining demand meeting and low cost. Results point to the possibility of an economy of 60% in transport cost and a reduction of 63% in the required quantity of trucks when densified waste is used. However, costs related to the densifying process lead to an increase of total supply costs of at least 37,8% in comparison to in natura waste. Summing up, the viability of biomass briquettes industry requires a cheaper densification process.

Irrigation management in pruned coffee tree crop

It was evaluated the effect of irrigation management on the production characteristics of coffee cultivar Acaiá MG-1474, planted in spacing of 3.00 m x 0.60 m, pruned in 2004, and irrigated by drip since the planting, in 1997. The experimental designed used was of randomized blocks with five treatments and four replications. The treatments consisted of irrigation management strategies, applying or not applying controlled moisture deficit in layer of 0 to 0.4m, in dry seasons of the year: A = no irrigation (control), B = irrigation during all year considering the factor of water availability in the soil (f) equal to 0.75, C = irrigation during all year considering f = 0.25, D = irrigation during all year, but in January /February /March /July /October /November /December with f = 0.25 and April /May /June /August /September with f = 0.75, E = irrigation only during April /May /June /August /September with f = 0.25. From July /2005 to June /2007 the applied water depth was defined based on Class A pan evaporation (ECA) and the period from July/2007 to June/2008 based on readings of matric potential of soil obtained from Watermark® sensors. Each plot consisted of three rows with ten plants per row, considering as useful plot five plants of center line. The results indicated that the E irrigation management was the most suitable for technical reasons.

Coffea arabica (cv Catuaí) production and bean size under different population arrangements and soil water availability

The purpose of this research was to evaluate the effect of drip irrigation under different population arrangements on the phytometric features, coffee productivity and bean size classification according to sieve retention. The experiment with Coffea arabica L. cv Catuaí was carried out in Mococa, São Paulo, Brazil. The experimental design was a 6 x 2 factorial scheme in randomized blocks, with four replications. The six densities of plantation were E1 (1.60 x 0.50 m); E2 (1.60 x 0.75 m); E3 (1.60 x 1.00 m); E4 (3.20 x 0.50 m); E5 (3.20 x 0.75 m) and E6 (3.20 x 1.00 m), which were divided according to the availability of water (irrigated - I - or non-irrigated - NI - groups). Data were submitted to analysis of variance and averages compared by Tukey test at 1 and 5% of probability. Descriptive analysis of coffee beans according to sieve classification was performed. Irrigation promoted an increase in plant height, crown diameter and production of processed coffee when compared with the NI group. Interaction between population arrangement and irrigation was observed, with an increase in production and crown diameter as the spacing was decreased. Therefore, irrigation provided significant increase in coffee bean size.

Initial development of two eucalyptus hybrid submitted to irrigation

The eucalyptus offers several advantages compared to other forestry species and, by using the irrigation can increase productivity and decrease production time. The objective of the present study was to evaluate two hybrid eucalyptus (Grancam and Urograndis), no irrigation, dripping and micro sprinkler irrigated at 90, 120, 150 and 180 days after transplanting (DAT). The experiment was conducted at the experimental irrigation area in the State University of Mato Grosso do Sul, in the municipality of Aquidauna - State of MS, Brazil. The experimental design was randomized blocks, split plot with four blocks and two replications within each block, and the plots were composed by irrigation treatments (dripping, micro sprinkler irrigate and dry) and the subplots the hybrids (Grancam and Urograndis).The total area of the experiment had 3 hectares, where each plot consisted of 1 ha. It was evaluated plant height, stem diameter and canopy, stem basal area, the relationship between height and stem diameter, the relationship between height and canopy diameter and stem volume. Data were subjected to analysis of variance and compared by Tukey test at 5% probability. Irrigation systems and dripping sprinkle provide greater plant height, stem diameter, canopy diameter, stem basal area and stem volume.

Infestation of weed species in pre-planting of soybean in succession to winter crops

This study aimed to evaluate different crops and plant species planted after soybeans for one year, in terms of their potential to inhibit the occurrence of weed species. The following crops that were planted as second crop after soybeans were evaluated: (1) corn (Zea mays) planted at spacing of 90 cm between rows, intercropped with Brachiaria ruziziensis in the inter-rows; (2) sunflower (Helianthus annuus); (3) crambe (Crambe abyssinica); (4) radish (Raphanus sativus); (5) rapeseed (Brassica napus); and (6) winter fallow - no plantation after soybeans. Phytosociological characterization of weed species was carried out at the pre-planting of soybeans in the following cropping season. Estimations of relative abundance, relative frequence, relative dominance and Importance Value Index were made for each species present. Areas were also intra-characterized by the diversity coefficients of Simpson and modified Shannon-Weiner, and areas were compared using the Jaccard similarity coefficient for presence-only, by multivariate cluster analysis. In the short‑term (a single cropping season), cultivation of winter crops do contribute for lower occurrence of weed species at the pre-planting of soybeans on the subsequent cropping season. The suppressive effects depend both on the species grown in the winter and in the amount of straw left on the soil by these winter crops. Radish was more efficient in inhibiting the occurrence of weed species and rapeseed showed composition of infestation similar to that observed at the area under fallow.