238 resultados para Catalisadores : Complexos de paládio
Resumo:
The present study proposes a method for cloud point preconcentration of copper ions at pH 2.0 based on complexes formed with [4,5-dimercapto-1,3-dithyol-2-thionate] and subsequent determination by flame atomic absorption spectrometry (FAAS). Under optimal analytical conditions, the method provided limits of detection of 0.84 and 0.45 µg L-1, by preconcentrating 12.0 and 24.0 mL of sample, respectively. The method was applied for copper determination in water samples, synthetic saliva, guarana powder, tea samples and soft drinks and the accuracy was assessed by analyzing the certified reference materials Dogfish Liver (DOLT-4) and Lobster Hepatopancreas (TORT-2).
Resumo:
Use of clays as catalyzers in heterogeneous processes has increased significantly given their low cost, safety and commercial availability. However, interconnected political, economic, social, environmental, geological, and chemical aspects should be considered for chemical processes to satisfy sustainable development concepts. This concept requires complex thinking involving different areas of knowledge in dialogue, contrasting with classical thought, which is linear and Cartesian. Thus, this paper discusses the principles of complex thought in the concept of sustainable development exemplified by use of clay as a clean technology in organic synthesis.
Resumo:
In this work, we describe the hydroformylation of methyl oleate catalyzed by several rhodium complexes. Parameters including total pressure, phosphorous/rhodium and CO/H2 ratio, temperature and phosphorous ligands were scanned. Total conversion of the starting double bonds was achieved while maintaining excellent selectivity in aldehydes.
Resumo:
The partial oxidation of ethanol on γ-Al2O3, CeO2, ZrO2 and Ce xZr1-xO2 supported rhodium catalysts was investigated by Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS). The catalysts were characterized by temperature-programmed reduction (TPR) and cyclohexane dehydrogenation. DRIFTS studies on the partial oxidation of ethanol showed that ethanol is adsorbed dissociatively, through O-H bond breaking, with the formation of ethoxy species, followed by successive dehydrogenation to acetaldehyde and acetyl species. Further oxidation to acetate and carbonate species lead to the formation of CO, CH4 and H2 by decomposition. The presence of CeO2 in the catalysts favored the oxidation steps due to its oxygen storage capacity.
Resumo:
Titanium dioxide nanostructured catalysts (nanotubes) doped with different metals (silver, gold, copper, palladium and zinc) were synthesized by the hydrothermal method in order to promote an increase in their photocatalytic activity under visible light. The catalysts were characterized by X-ray diffraction, diffuse reflectance spectroscopy, transmission electron microscopy and specific area and pore volume determination. The materials' photocatalytic activity was evaluated by rhodamine B decomposition in a glass batch reactor. Under UV radiation, only nanotubes doped with palladium were more active than the TiO2 P25, but the samples doped with silver, palladium and gold exhibited better results than the undoped samples under visible light.
Resumo:
Cobalt or iron oxides supported or not on zeolite Hbeta were prepared and evaluated in the reduction reaction of NO by CO in presence of O2, SO2 or H2O. XRD results evidenced the Hbeta structure and the formation of Co3O4 and Fe2O3. TPR-H2 analysis showed complete reduction of cobalt oxide at lower temperatures than for iron oxide. The catalysts are quite active and the activity depends on the reaction temperature. The highest conversions rates were observed for pure iron oxide, which can be a relatively low cost catalyst for reduction of NO by CO, with high selectivity towards the N2 formation.
Resumo:
Biomass gasification is a technology that has attracted great interest in synthesis of biofuels and oxo alcohols. However, this gas contains several contaminants, including tar, which need to be removed. Removal of tar is particularly critical because it can lead to operational problems. This review discusses the major pathways to remove tar, with a particular focus on the catalytic steam reforming of tar. Few catalysts have shown promising results; however, long-term studies in the context of real biomass gasification streams are required to realize their potential.
Resumo:
Rice husk ash (RHA) is used as a silica source for several purposes, among them to obtain metal catalysts, as was done in this work. The catalysts were characterized by chemisorption, physisorption, thermal analyses (TG, DSC), X-ray diffraction, X-ray fluorescence, temperature-programmed reduction and scanning electron microscopy. The catalysts synthesized with different Ni loadings supported on RHA were applied to the reaction of dry reforming of methane. The reaction was tested at three temperatures of catalytic reduction (500, 600 and 700 ºC). All synthesized catalysts were active for the studied reaction, with different H2/CO ratios achieved according to degree of metallic dispersion.
Resumo:
Palm oil containing 40% fatty acids was converted to methyl esters using zinc carboxylates as the esterification/transesterification catalyst. The reaction was optimized using a factorial design in which the effects of the alcohol:fatty acids molar ratio (MRAG) and the catalyst concentration (CAT) were assessed. The best conversion was achieved with CAT at 4 wt% and MRAG at 4:1. However, the solid catalyst presented significant structural changes after use. For instance, laurate anions were replaced by carboxylates of higher molecular mass, leading to the formation of a new catalytically active layered structure. Also, the glycerin obtained as a co-product contained 86 wt% glycerol.
Resumo:
In this work, a theoretical study on the basis of structural, vibrational, electronic and topological parameters of the C2H2‧‧‧(HF), C2H2‧‧‧2(HF) and C2H2‧‧‧3(HF) complexes concerning the formation of π‧‧‧H, F‧‧‧H and C‧‧‧H hydrogen bonds is presented. The main difference among these complexes is not properly the interaction strength, but the hydrogen bond type whose benchmark is ruled justly by the structure. Meanwhile, the occurrence of π‧‧‧H hydrogen bonds was unveiled in both C2H2‧‧‧(HF) dimer and C2H2‧‧‧3(HF) tetramer, although in latter, this interaction is stronger than C‧‧‧H of the C2H2‧‧‧2(HF) trimer. However, the F‧‧‧H hydrogen bonds within the subunits of hydrofluoric acid are the strongest ones, reaching a partial covalent limit, and thereby contribute decisively to the stabilization of the tetramer structure. In line with this, the largest red-shifts were observed on the hydrofluoric acid trimer of the C2H2‧‧‧3(HF) complex.
Resumo:
A influência de digeridos e suspensões de açúcar no comportamento térmico de As usando Pd(NO3)2, Pd(NO3)2 + Mg(NO3)2, and Ni(NO3)2 como modificadores químicos foi investigada. Influência de 0,2%, 5%, 10% e 35% (v/v) HNO3 na calibração (1,00 - 10,0 µg As L-1) também foi feita. Um volume de 20 µL de amostra mais 5 µL Pd ou 5 µL Pd + 3 µL Mg, ou 20 µL Ni foi injetado no atomizador do GF AAS. Para cada modificador, temperaturas de pirólise e atomização foram avaliadas por meio de curvas de pirólise e de atomização, respectivamente. Para suspensão de açúcar, temperaturas de pirólise e atomização (Tp, Ta) obtidas foram: sem modificador (400° C, 2000° C); Pd (1400° C, 2200° C); Pd/Mg (1400° C, 2200° C) e Ni (1600° C, 2200° C). Os valores para digeridos de açúcar foram: sem modificador (400° C, 2200° C); Pd (1400° C, 2200° C); Pd/Mg (1400° C, 2200° C) e Ni (600° C, 2200° C). Paládio foi selecionado como o melhor modificador químico. O tempo de vida do tubo de grafte foi de aproximadamente 350 queimas, o RSD (n = 12) para uma amostra típica contendo 5,52 µg As L-1 foi < 2,2% e o limite de detecção foi 2,4 pg As. Recuperações entre 80 e 92% foram encontradas.
Resumo:
Complexos de percloratos à base de terras raras com a 2-azaciclononanona (AZA) foram obtidos a partir da reação entre os respectivos sais hidratados com a AZA (proporção molar 1:8) pelo método de difusão de vapor e caracterizados por titulação complexiométrica com EDTA, microanálise (CHN), espectroscopia vibracional na região do IV, termogravimetria em atmosfera de ar e N2 e calorimetria exploratória diferencial (DSC) em atmosfera de N2. O estudo cinético desse trabalho foi realizado utilizando um software em QBASIC que faz a simulação dos dados termogravimétricos a partir de um conjunto dado de parâmetros cinéticos.
Resumo:
No presente trabalho é descrita a investigação do comportamento térmico de uma nova série de complexos ciclopaladados, obtidos a partir de reações do azido-complexo [Pd(dmba)(mi-N3)]2 (1) (dmba = N,N-dimetilbenzilamina) com os azo-ligantes aniônicos pirazolato (pz), imidazolato (imz) e 3,5-dimetil-pirazolato (3,5-dmpz). Os compostos binucleares [Pd(dmba)(mi-pz)]2 (2), [Pd(dmba)(mi-imz)]2 (3) e [Pd(dmba)(mi-3,5-dmpz)]2 (4) foram caracterizados por análise elementar, espectroscopia de absorção na região do infravermelho, espectroscopia de RMN de 13C{¹H} e ¹H e análise termogravimétrica. O produto final de decomposição térmica, paládio metálico, foi caracterizado pela difratometria de raios-X, método do pó.
Resumo:
Os íons fosfito constituem um importante componente inorgânico como fonte de fósforo na fertilização de solos, apresentando incontáveis vantagens em relação ao fosfato. A determinação desse ânion em produtos fertilizantes é usualmente realizada empregando-se método clássico de análise como gravimetria, sob a forma de pirofosfato de magnésio ou pela formação de cloreto mercuroso. Entretanto, existem algumas desvantagens nesta metodologia, como a necessidade de um elevado tempo de digestão e a possível produção de resíduos tóxicos. Sendo assim, este trabalho teve como objetivo propor uma metodologia eletroquímica alternativa para a determinação de fosfito. A modificação eletroquímica na superfície de eletrodos de platina realizada por eletrodeposição de paládio apresentou efeito catalítico para a oxidação de íons fosfito a fosfato em meio de ácido sulfúrico 1,0 mol.L-1. Uma dependência linear em relação à concentração de fosfito foi obtida no intervalo de 5,0x10-6 a 5,0x10-4 mol.L-1 tendo uma sensibilidade amperométrica de 8,5x10(4) miA.mol-1.L e um limite de detecção de 3.67x10-6 mol.L-1.
Resumo:
Os espectros de RMN de sais de calix[4]areno e aminas alifáticas , em acetonitrila, mostraram valores de deslocamento químico dos hidrogênios do calix[4]areno próximos entre si para as diversas aminas. Foram obtidas as temperaturas de coalescência ( t c), acompanhando os hidrogênios metilênicos entre 32 e 38 ºC para os sais de calixareno com as aminas e o aumento de t c deve-se ao aumento da basicidade da amina e não a fatores relacionados com o volume. Os dados estão de acordo com uma proposta exo-cálix, em que os cátions amônio situam-se fora da cavidade do calixareno.