Corn and soybean yields as affected by cover crops and herbicide timing under no-tillage system

To achieve better results in the no-tillage system (NTS), it is important to properly manage the cover crop prior to planting by using herbicides, usually glyphosate. The effect of glyphosate on plant coverage is slow, and plants take a few days to die completely. Thus, when applying the herbicide on the same day of planting soybean or corn, cover crops are still alive and standing, causing initial shading on seedlings of the crop and delaying its establishment. Therefore, this study aimed to evaluate the effect of distinct cover crops and their timing of desiccation prior to planting soybean or corn, on crop yield and yield components. Two experiments were installed, one for soybean and another for corn. Each experiment consisted in combining three cover crops (Brachiaria brizantha, common bean or millet) chemically desiccated at two timings before planting the crop (15 or 0 days before planting) under no-tillage system (NTS). Experiments were installed in a completely randomized block design with five replications. Brachiaria brizantha produced the highest amount of biomass; common bean and millet as cover crops allowed higher soybean grain yields; herbicide application under common bean, millet and Brachiaria brizantha 15 days before planting soybean allowed higher crop grain yields; desiccation timing of common bean did not affect corn grain yield; Brachiaria brizantha should be desiccated 15 days before planting corn to allow maximum grain yield; when millet was used as a cover crop, glyphosate application at planting of corn allowed the highest grain yield.

Interference of Sorghum sudanense and Eleucine indica in the soybean and corn cultivation

The natural infestations are composed of numerous species that compete for environmental resources such as water, light, nutrients and space. The objective of this study was to evaluate the interference of mixed infestations Sorghum sudanense (sudangrass) and Eleusine indica (goosegrass) in the presence of soybean and corn. The experimental design was completely randomized with four replications and the experimental units consisted of plastic pots with a volume capacity of 8 L. The treatments were associations of plants S. sudanense and E. indica in the proportions 8:0, 6:2, 4:4,2:6 and 0:8, respectively, corresponding to 100, 75, 50, 25 and 0% S. sudanense and the reverse for E. indica. In all treatments remained constant four soybean or corn plants per experimental unit. The variables analyzed in the weeds were shoot dry weight, root, total and height of plants. The competitive analysis was accomplished through diagrams applied to replacement series experiment and indexes of competiveness. The results indicated that E. indica was more competitive than S. sudanense in mixed infestations with corn. Rather, S. sudanense was more competitive than E. indica, in mixed infestations with soybean, demonstrating differences in competitiveness among the weeds.

Glyphosate tolerant volunteer corn control at two development stages

The loss of grains during the harvest of glyphosate tolerant corn may generate volunteer plants, which can interfere in the conventional or glyphosate crop in succession. The current work aim to evaluate the control of the volunteer corn glyphosate tolerant under two weed stages. Aimed to evaluate the control of volunteer glyphosate tolerant corn in two stages of development. There were conducted two experiments with hybrid 2B688 HR (lepidoptera and glyphosate tolerant), the application were at V5 and V8 stage. The experiment was randomized block design with four replicates, using the treatments: haloxyfop at 25, 50 and 62 g ha-1 alone and associated with 2,4-D at 670 g ha-1 or fluroxypyr at 200 g ha-1. The standard was clethodim at 84 g ha-1 with 2,4-D and fluroxypyr at same rates. The applications of haloxyfop and clethodim both isolated or in a mixture with 2,4-D and fluroxypyr at V5 stage showed total control (100%) at 32 and 39 days after the application, except for haloxyfop + 2,4-D (25 + 670 g ha-1) mixture, which did not provided adequate control. At V8 stage, haloxyfop + 2,4-D (50 + 670 g ha-1) and haloxyfop + 2,4-D (62 + 670 g ha-1) mixtures took up to 6 and 10 days or longer to reach adequate to excellent control, when compared to haloxyfop isolated applications in the same doses, respectively. Either isolated clethodim or mixed with 2, 4-D and fluroxypyr did not show adequate control. The treatments showed efficient control on volunteer corn plants at V5 stage, except for haloxyfop + 2, 4-D (25 + 670 g ha-1) mixture. At V8 stage applications, haloxyfop either isolated or mixture with fluroxypyr demonstrated excellent control on every evaluated dose. The mixture with 2, 4-D can reduce haloxyfop efficiency at low doses. Clethodim alone or mixed with 2,4-D or furoxypyr did not provide acceptable level of control.

Population density and weed infestation in organic no-tillage corn cropping system under different soil covers

Currently, one of the biggest challenges faced by organic no-tillage farming is weed control. Thus, the use of cropping practices that help in the control of weeds is extremely important. The objective of this study was to evaluate population density and level of weed infestation in an organic no-tillage corn cropping system under different soil covers. The experiment was conducted in a randomized block design with six repetitions and five treatments, consisting of three soil covers in an organic no-tillage system, and an organic and a conventional system, both without soil cover. The treatments with soil cover used a grass species represented by the black oat, a leguminous species represented by the white lupine, and intercropping between both species. Corn was sown with spacing of 1.0 m between rows and 0.20 m between plants, using the commercial hybrid AG 1051. Infestation in corn was evaluated at stages V5 and V10, and weed density was evaluated at stage V5. The use of black oat straw alone or intercropped with white lupine, in the organic no-tillage corn cropping system, reduced the percentage of weed infestation and absolute weed density. Management-intensive systems and systems without soil cover showed higher relative densities for species Oxalis spp., Galinsoga quadriradiata and Stachys arvensis. The species Cyperus rotundus showed the highest relative density on organic no-tillage corn cropping systems. Black oat straw in the organic no-tillage cropping system limited the productive potential of corn.

Volunteer RR® corn management in roundup ready® soybean-corn succession system

The present study evaluated the effects of cover crops (Pennisetum glaucum, Crotalaria spectabilis and Urochloa ruziziensis) associated with the application of herbicides {glyphosate; (glyphosate + haloxyfop-R); (glyphosate + fluazifop-p-butyl); (glyphosate + imazethapyr) and (glyphosate + imazaquin)} in soybean desiccation management for volunteer RR® corn control. The experiment was conducted under field conditions at Sinop-MT, during the 2013/2014 crop season, in a randomized complete blocks design with factorial scheme and four replications. The following parameter were evaluated: dry matter of cover crops and ground coverage rate, control of volunteer RR® corn present at the time of desiccation, dry matter, height and intoxication level on soybean plants caused by herbicides at 7, 14 and 28 days after emergence (DAE), control of volunteer RR® corn derived from emergence fluxes subsequent to desiccation management and soybean yield. The joint application of (glyphosate + haloxyfop-R) provided the best level of volunteer RR® corn control present at the time of desiccation. Satisfactory control (80%) of volunteer corn was obtained with the application of (glyphosate + imazethapyr). This treatment displayed an additional residual effect of imazethapyr, which efficiently controled volunteer RR® corn derived from fluxes subsequent to desiccation management, especially in treatments performed under U. ruziziensis straw. None of the herbicides used in desiccation management caused any significant effect on dry matter, height and phytotoxicity of soybean plants at 7, 14 and 28 DAE nor on grain yield.

Soil Persistence of Chlorimuron-Ethyl and Metsulfuron-Methyl and Phytotoxicity to Corn Seeded as a Succeeding Crop

Two experiments were carried out to evaluate soil persistence of chlorimuron-ethyl and metsulfuron-methyl and phytotoxicity to corn seeded as a succeeding crop. One experiment was conducted with chlorimuron-ethyl applied at 20 g ha-1, and one with metsulfuron-methyl applied at 3.96 g ha-1. Treatments were arranged in a factorial design with two types of soil (sandy and clay), three irrigation regimes (daily, weekly and no irrigation) and four application timings (90, 60 and 30 days before corn seeding, as well as untreated plots). Soil persistence of the herbicides was influenced by water availability, molecule water solubility (leaching potential) and application timings prior to corn seeding. In sandy soil, with adequate water availability, leaching probably had the greatest influence, reducing the persistence of the products, and consequently allowing less time between product application and corn seeding. In clay soil, microbial degradation was probably more important, because it was assumed that the lesser time available for microorganism activity, the lesser the damage was observed for corn, as long as the crop had enough water availability. Metsulfuron-methyl was the least phytotoxic herbicide, possibly as a result of the properties of its molecule and its higher leaching potential.

Determining economical TBHQ doses for corn oil stability

Corn oil obtained from a Brazilian industry, free from antioxidants and citric acid, added of different tertiary butylhydroquinone (TBHQ) concentrations, was submitted to accelerated oxidation in the Schaal oven test at 63°C for 120 hours and for 168 hours in a photooxidation chamber. Peroxide and absorptivity values at 232nm and 270nm were determined for this oil. From the Schaal oven test results, the best and the economical TBHQ doses were determined to this oil. Afterwards, a shelf life experiment was conducted and confirmed 115mg.kg-1 TBHQ as the best and economical dose for that oil.

Evaluation of the in vitro glycemic index of a fiber-rich extruded breakfast cereal produced with organic passion fruit fiber and corn flour

The aim of this study was to determine the influence of process parameters and Passion Fruit Fiber (PFF) addition on the Glycemic Index (GI) of an extruded breakfast cereal. A 2³ Central Composite Rotational Design (CCRD) was used, with the following independent variables: raw material moisture content (18-28%), 2nd and 3rd barrel zone temperatures (120-160 ºC), and PFF (0-30%). Raw materials (organic corn flour and organic PFF) were characterized as to their proximate composition, particle size, and in vitro GI. The extrudates were characterized as to their in vitro GI. The Response Surface Methodology (RSM) and Principal Component Analysis (PCA) were used to analyze the results. Corn flour and PFF presented 8.55 and 7.63% protein, 2.61 and 0.60% fat, 0.52 and 6.17% ash, 78.77 and 78.86% carbohydrates (3 and 64% total dietary fiber), respectively. The corn flour particle size distribution was homogeneous, while PFF presented a heterogeneous particle size distribution. Corn flour and PFF presented values of GI of 48 and 45, respectively. When using RSM, no effect of the variables was observed in the GI of the extrudates (average value of 48.41), but PCA showed that the GI tended to be lower when processing at lower temperatures (<128 ºC) and at higher temperatures (>158 ºC). When compared to white bread, the extrudates showed a reduction of the GI of up to 50%, and could be considered an interesting alternative in weight and glycemia control diets.

Rheological behavior of corn and soy mix as feed ingredients

Foods behave as non-Newtonian fluids, but little is known about how corn and soybean mix behave under viscometric flow. In order to characterize the rheological behavior of animal feed under viscometric flow, a 70:30 (mass:mass) mixture of ground corn and soybean grains was submitted to a capillary rheometer at 3 different temperatures (80, 120, and 160 °C), different moisture levels (26.5 ± 0.08; 30.4 ± 0.31, and 33.4 ± 0.05%), and 4 shear rates (30.4; 72.9; 304.3, and 728.6/second). Different strain rates and die dimensions were used to obtain the target shear rates. The resulting data were fitted to Power Law, Casson, and Bingham models. Based on experimental data, water content, mass temperature, and the effects of shear rate on the apparent shear viscosity of corn-soy mix were fitted to a single expression (p < 0.001, R² = 0.93): η = 18,769.7 (y)-0.86 e (-9.34 U + 935 T), where y is shear rate, U is sample moisture, and T is sample temperature in Kelvin scale. As expected, such mixture presented a pseudoplastic (shear-thinning) behavior.

Production and partial characterization of alkaline polygalacturonase secreted by thermophilic Bacillus sp. SMIA-2 under submerged culture using pectin and corn steep liquor

Polygalacturonase production by the thermophilic Bacillus sp. SMIA-2 cultivated in liquid cultures containing 0.5% (w/v) apple pectin and supplemented with 0.3% (w/v) corn steep liquor, reached its maximum after 36 hours with levels of 39 U.mL-1. The increase in apple pectin and corn steep liquor concentrations in the medium from 0.5 and 0.3%, respectively, to 0.65%, markedly affected the production of polygalacturonase, whose activity increased four times, reaching a maximum of 150.3 U.mL-1. Studies on polygalacturonase characterization revealed that the optimum temperature of this enzyme was between 60-70 °C. Thermostability profile indicated that the enzyme retained about 82 and 63% of its activity at 60 and 70 °C, respectively, after 2 hours of incubation. The optimum pH of the enzyme was found to be 10.0. After incubation of crude enzyme solution at room temperature for 2 hours at pH 8.0, a decrease of about 29% on its original activity was observed. At pH 10.0, the decrease was 25%.

Corn germ with pericarp in relation to whole corn: nutrient contents, food and protein efficiency, and protein digestibility-corrected amino acid score

The germ fraction with pericarp (bran) is generated in the industrial processing of corn kernel, and it is used for oil extraction and animal feed. This study evaluated the nutritional and protein quality of this fraction in relation to whole corn. The proximate composition, mineral contents, and amino acid profile of the germ fraction with pericarp and of whole corn were determined. A 4-week experiment was conducted using 36 weanling male Wistar rats, and three 10%-protein diets (reference, germ with 15% lipids and casein with 15% lipids), two 6%-protein diets (whole corn and casein), and a protein-free diet were prepared. The germ showed higher contents of proteins, lipids, dietary fiber (27.8 g.100 g-1), ash, minerals (Fe and Zn- approximately 5 mg.100 g-1), and lysine (57.2 mg.g-1 protein) than those of corn. The germ presented good quality protein (Relative Protein Efficiency Ratio-RPER = 80%; Protein Digestibility-Corrected Amino Acid Score-PDCAAS = 86%), higher than that of corn (RPER = 49%; PDCAAS = 60%). The corn germ fraction with pericarp is rich in dietary fiber, and it is a source of good quality protein as well as of iron and zinc, and its use as nutritive raw material is indicated in food products for human consumption.

Color and chemical composition and of green corn produced under organic and conventional conditions

The present study aimed to evaluate the chemical properties of green corn, grown in both organic and conventional farming systems, using a completely randomized factorial design. Four corn varieties (AG 1051, BR 106, SWB 551 and VIVI) of green corn kernels were evaluated for color, proximate composition, total calories, carotenoids and bioactive amines. The farming system affected some chemical and physical characteristics of green corn, but this effect was dependent upon variety. In general, organic green corn kernels were reddish (a* color component) and had higher levels of β-carotene compared to the conventional ones, suggesting that these characteristics are related. Moreover, organic green corn had higher levels of total carbohydrates and total energy compared to conventional varieties. On the other hand, crude fiber levels were higher in conventional grains - an unexpected result that deserves further investigation. Finally, the levels of cadaverine and spermine bioactive amines were not affected either by the corn variety or by the farming system.

Simultaneous α-amylase and protease production by the soil bacterium Bacillus sp. SMIA-2 under submerged culture using whey protein concentrate and corn steep liquor: compatibility of enzymes with commercial detergents

Protease and α-amylase production by a thermophilic Bacillus sp. SMIA-2 cultivated in liquid cultures containing 0.25% (w/v) starch as a carbon source reached a maximum at 18 hours (47 U.mg-1 Protein) and 36 hours (325 U.mg-1 Protein), respectively. Culture medium supplementation with whey protein concentrate (0.1%, w/v) and corn steep liquor (0.3%, w/v) not only improved the production of both enzymes but also enabled them to be produced simultaneously. Under these conditions, α-amylase and protease production reached a maximum in 18 hours with levels of 401 U.mg-1 protein and 78 U.mg-1 protein, respectively. The compatibility of the enzymes produced with commercial laundry detergent was investigated. In the presence of Campeiro® detergent, α-amylase activity increased while protease activity decreased by about 27%. These enzymes improved the cleaning power of Campeiro® detergent since they were able to remove egg yolk and tomato sauce stains when used in this detergent.

Some functional characteristics of extruded blends of fiber from sugarcane bagasse, whey protein concentrate, and corn starch

Blends of fiber from sugar cane bagasse, corn starch, and whey protein concentrate were extruded. A single screw extruder, equipped with a screw at a constant compression ratio of 1:1 and a die diameter of 3 mm, was used. The best processing conditions were determined according to a central composite rotatable design (α = 1.41) with 5 central points, which gives a total of 13 tests. During the extrusion process the content of insoluble fiber decreased and that of soluble fiber increased. An increase in the contents of fiber and in the barrel temperature resulted in a decrease in the expansion index values and an increase in the water absorption index values; whereas in blends with intermediate fiber contents the effects in these parameters were found to be the opposite. High fiber contents increased penetration force but decreased luminosity, water solubility index values and the adhesive force in gels. The extrusion process improved the functional properties of sugarcane fiber bagasse enabling its addition to diverse alimentary systems.

Effects of the mechanical damage on the water absorption process by corn kernel

The purpose of this study was to investigate and model the water absorption process by corn kernels with different levels of mechanical damage Corn kernels of AG 1510 variety with moisture content of 14.2 (% d.b.) were used. Different mechanical damage levels were indirectly evaluated by electrical conductivity measurements. The absorption process was based on the industrial corn wet milling process, in which the product was soaked with a 0.2% sulfur dioxide (SO2) solution and 0.55% lactic acid (C3H6O3) in distilled water, under controlled temperatures of 40, 50, 60, and 70 ºC and different mechanical damage levels. The Peleg model was used for the analysis and modeling of water absorption process. The conclusion is that the structural changes caused by the mechanical damage to the corn kernels influenced the initial rates of water absorption, which were higher for the most damaged kernels, and they also changed the equilibrium moisture contents of the kernels. The Peleg model was well adjusted to the experimental data presenting satisfactory values for the analyzed statistic parameters for all temperatures regardless of the damage level of the corn kernels.