Hydrogen production from cassava processing wastewater in an anaerobic fixed bed reactor with bamboo as a support material

Attempting to associate waste treatment to the production of clean and renewable energy, this research sought to evaluate the biological production of hydrogen using wastewater from the cassava starch treatment industry, generated during the processes of extraction and purification of starch. This experiment was carried out in a continuous anaerobic reactor with a working volume of 3L, with bamboo stems as the support medium. The system was operated at a temperature of 36°C, an initial pH of 6.0 and under variations of organic load. The highest rate of hydrogen production, of 1.1 L.d-1.L-1, was obtained with application of an organic loading rate of 35 g.L-1.d-1, in terms of total sugar content and hydraulic retention time of 3h, with a prevalence of butyric and acetic acids as final products of the fermentation process. Low C/N ratios contributed to the excessive growth of the biomass, causing a reduction of up to 35% in hydrogen production, low percentages of H2 and high concentrations of CO2in the biogas.

Portable flow board for storage of fruits and vegetables in mini-chambers with controlled atmosphere

ABSTRACT A portable flow board system was developed in the present study with the aim to facilitate lab-scale experiments of controlled atmosphere (CA) with fruits and vegetables. This sturdy flow board combines ease fabrication, low cost and gas economy. Its functionality is provided by manifolds and gas mixers. Each gaseous component is supplied by a gas cylinder through a differential valve of adjusted pressure control, generally at 6 kPa, and forced through 13 standardized restrictors coupled to each manifold output. Controlled atmospheres are then formed with one, two or three gases in 13 gas mixers affixed to the flow board base, which are further conducted through flexible tubes to storage mini-chambers that can also be used to study metabolic consumption and production of gaseous components. The restrictors used in the flow gaseous components were manufactured from microhematocrit test-type capillary glass tubes following the hot forming method under continuous air flow. The portable flow board showed to be low cost and simple post-harvest equipment that allows preparing controlled atmospheres in open systems with stable composition and flow, in a manner similar to traditional flow boards with control of gas escape by barostats.

Evaluation of skin sensitivity in dogs bearing allergic dermatitis to standardized allergenic extract of house dust and storage mites

The objective of the study was to evaluate whether allergenic extracts of five house dust and storage mite species standardized for humans might be used for the diagnosis of canine atopic dermatitis (CAD). Extracts of Dermatophagoides pteronyssinus (Pyroglyphidae), D. farinae (Pyroglyphidae), Blomia tropicalis (Glycyphagidae), Lepidoglyphus destructor (Glycyphagidae) and Tyrophagus putrescentiae (Acaridae) were evaluated by intradermal testing in 20 healthy dogs (control) and 25 dogs with allergic dermatitis. A significant difference in the response was observed between the two groups (p<0.05). Only one dog (5%) in the control group reacted to the intradermal test, whereas 14 dogs (56%) in the allergic group were positive for at least one extract (odds ratio = 24.2). Most of the positive reactions observed in the allergic group occurred against the extracts of T. putrescentiae or L. destructor, each inducing reactions in 10 dogs (40%). D. farinae, D. pteronyssinus e B. tropicalis extracts induced reactions in 7 (28%), 3 (12%) and 3 (12%) dogs, respectively. The allergenic extracts standardized for humans evaluated in the present study may be used as a tool to complement the diagnosis of the disease, as well as to select potential allergen candidates for allergen-specific immunotherapy.

Histochemical study of the oviducal gland and analysis of the sperm storage tubules of Mustelus schmitti Springer, 1939 (Chondrichthyes, Triakidae)

Abstract: The paired oviducal glands of immature and mature females of Mustelus schmitti were examined macro and microscopically. Findings indicate that these glands possessed the same zonation as in most chondrichthyans from anterior to posterior: club, papillary, baffle and terminal zones. The whole gland is composed by simple tubular glands that connect with transverse grooves all along the organ. The club zone presents a typical indian club shape with a simple columnar and ciliated epithelium including secretory cells PAS (+) and AB (+). The papillary zone is characterized by lamella forming small and long cones in numbers of three. The epithelium of this zone contains ciliated cells with apical nuclei and secretory cells with basal nuclei that stain AB (+)The baffle zone consists of apically flattened lamellae alternating with spinnerets which are small projections disposed by both sides of the plateau. This whole structure is present in number of 8 or 9 units. A simple columnar ciliated epithelium covers the plateau and spinnerets and no AB or PAS staining is observed. The epithelium of the terminal zone is PAS (-) and AB (+), and elongated tubules, that run adjacent to the baffle zone are the site where groups of spermatozoa are clearly observed in the lumen. The epithelium of the sperm storage tubules do not stain with any of the dyes tested. Sperm was also observed in the baffle zone, presumably in its way to the fecundation in the oviduct because it displays no aggregation pattern and was between the folds of the epithelium. By scanning electron microscopy sperm was observed in the club and baffle zones in a gland which belonged to a pregnant female.

Fracture modes and acoustic emission characteristics of hydrogen-assisted cracking in high-strength low-alloy steel weldment

The aim of the present paper is to study the relationship between the fracture modes in hydrogen-assisted cracking (HAC) in microalloied steel and the emission of acoustic signals during the fracturing process. For this reason, a flux-cored arc weld (FCAW) was used in a high-strength low-alloy steel. The consumable used were the commercially available AWS E120T5-K4 and had a diameter of 1.6 mm. Two different shielding gases were used (CO2 and CO2+5% H2) to obtain complete phenomenon characterization. The implant test was applied with three levels of restriction stresses. An acoustic emission measurement system (AEMS) was coupled to the implant test apparatus. The output signal from the acoustic emission sensor was passed through an electronic amplifier and processed by a root mean square (RMS) voltage converter. Fracture surfaces were examined by scanning electron microscopy (SEM) and image analysis. Fracture modes were related with the intensity, the energy and the number of the peaks of the acoustic emission signal. The shielding gas CO2+5% H2 proved to be very useful in the experiments. Basically, three different fracture modes were identified in terms of fracture appearance: microvoid coalescence (MVC), intergranular (IG) and quasi-cleavage (QC). The results show that each mode of fracture presents a characteristic acoustic signal.

Arc fusion of self-fluxed nickel alloys

Self-fluxed nickel alloys are usually flame fused after thermal spraying. However, due to the practical aspects of high temperatures reached during flame fusing, large structures such as the hydraulic turbines for power generation, can not be efficiently coated. An alternative is to fuse the sprayed coating with a gas tungsten electric arc. In this case, heating is much more intensive and substrate temperature during and after the fusing operation is much lower, thus reducing the possibility that any problem will occur. In this work, coatings of self-fluxed nickel alloy fused by flame and gas tungsten arc were evaluated as protection of hydraulic turbines against cavitational damage. Several tests were performed, including the ASTM ultrasonically vibration-induced cavitation, optical and scanning electronic microscopic metallography, and hardness tests. The results showed that the arc-fused coating presented better cavitation damage resistance, probably due to its finer microstructure. A field application of this new technique is also described. A self-fluxed Ni alloy was flame sprayed in critical regions of Francis-type hydraulic turbine blades and fused by a gas tungsten arc after spraying. The blades will be inspected during the next two years.

Noise and vibration damping of Fe-Cr-x alloys

The aim of the present work is to study the noise and vibration damping capacity of ferromagnetic Fe-16%Cr base alloys (before and after heat treatment) with different Al and Mo contents. The noise damping was evaluated by the level of sound emission after an impact. The vibration damping was studied using a cantilever device. In addition to these tests, the magnetic structure of the materials was also investigated by Kerr effect. It was verified that the materials can decrease noise level in the frequency range of human earring. The vibration damping is influenced by heat treatment and chemical composition of the alloy. The improvement of vibration damping after heat treatment is ascribed to the decrease of internal stresses in materials and changes in magnetic domain structures.

Welding current effect on diffusible hydrogen content in flux cored arc weld metal

The application of flux cored arc welding (FCAW) has increased in manufacturing and fabrication. Even though FCAW is well known for its good capability in producing quality welds, few reports have been published on the cause of the relatively high diffusible hydrogen content in the weld metal and its relation with the ingredients used in the wire production and with the welding parameters (mainly welding current). This paper describes experiments where data obtained from weld metal diffusible hydrogen analysis, metal droplet collection, and high-speed recording of metal droplet transfer were used to evaluate the effect of welding current on diffusible hydrogen content in the weld metal. The results from gas chromatography analysis showed that weld metal hydrogen content indeed increased with welding current. A polynomial regressional analysis concluded that hydrogen increase with current was better described by a linear function with proportional constant of approximately 0.7 or 70%. Different from the GMA welding transfer behavior, statistical analysis showed only a small increase in metal droplet size with increasing current. The metal transfer mode remained in the globular range for currents between 100 and 150 A. The most surprising findings were with the high-speed cinematography recording. Observing the high speed movies, it was possible to see that at low current, "unmelted" flux sporadically touched the weld pool but at higher current, the flux remained touching the weld pool during the whole time of droplet formation and transfer. It is believed that since the flux has ingredients that contain hydrogen, hydrogen passes through the arc undisturbed, going to the weld bead intact and increasing the hydrogen content in the weld metal. Another important observation is regarding to droplet size. Droplet size increased with increasing current because forces from decomposed gases from the flux could sustain the droplets, retarding their transfer and allowing them to grow.

Reserve substances and storage of Cyathea delgadii Sternb. spores

The spores used were collected from a population of trees of Cyathea delgadii Sternb. growing in a gallery forest at the Reserva Biológica e Estação Experimental de Moji Guaçu, São Paulo state, Brazil (22°18’S and 47°11’W). The germination of spores of Cyathea delgadii decreases with time when kept in closed bottles under storage at 4°C in darkness. Germination is still very high after storage for one year. Spores stored for three years do not germinate. The results also show a decrease in soluble proteins and an increase in starch after several months storage.

Light and storage on the germination of spores of Dicksonia sellowiana (Presl.) Hook., Dicksoniaceae

Spores of Dicksonia sellowiana are positively photoblastic and reach the maximum percentage of germination at 23 ± 2°C in white light after seven days of imbibition. The pre-induction phase for spores induced by white or red light for 24 hours was 72 hours. Gametophytes grown in white light were plane and bidimensional, while those grown under red light were filamentous. The higher the number of hours of light applied per day during 10 days, the higher the percentage of germination. Germination was higher for long white light treatments applied on a daily basis. The effect of different light intensities on germination was also investigated here. The lower percentages of germination were observed for spores kept under 43% and 2% of full sunlight, while those kept under 26, 19 and 4% presented higher percentages. Spores presented circa 82% of germination after 731 days of storage under refrigeration at aproximately 10°C.

Effect of storage of achenes of Bidens gardneri Baker on light sensitivity during germination

Bidens gardneri is a very common herbaceous species in the cerrados of the state of São Paulo, whose seeds become light sensitive at 25°C only. Achenes of this species were stored in refrigerator at 4°C and in cerrado soil and in forest soil. The field experiments were carried out in the cerrado at the Reserva Biológica e Estação Experimental de Moji Guaçu, in Moji Guaçu and in the forest of the Instituto de Botânica, in São Paulo, Brazil. Achenes of B. gardneri vary in size and achenes from 7 to 12 mm long were used. Achenes stored for up to 6 months at 4°C showed light sensitivity; after 9 months storage, the difference in germination between light and darkness had disappeared for the smallest and the largest achenes used. Seeds of B. gardneri germinated during the period of storage in soil; the number of germinated seeds increased over the storage time, while the number of intact achenes decreased for the same period, no matter if the experiment was being carried out in the cerrado or in the forest. Therefore, the achenes germinated in soil in darkness. Light sensitivity was lost in intact achenes that had been stored in soil for three months.

Storage substances in the androgametogenesis and mature pollen grain of Ilex paraguariensis St. Hil. (Aquifoliaceae)

Storage substances such as starch grains, proteins and lipids were studied during the male gametogenesis and in the mature pollen grain of Ilex paraguariensis St. Hil. (Aquifoliaceae). There are two cycles of amylogenesis and amylolyse. The first cycle lasts until the vacuolated stage when the starch is hydrolyzed and amorphous proteins are stored inside the single vacuole. The next cycle begins after mitosis with the formation of the vegetative and generative cells. At this point, the young vegetative cell stores many starch grains that are bigger than in the first cycle. During the maturation of the male gametophyte, the starch is hydrolyzed and it is absent in the mature pollen grain. Small lipid droplets surround the young generative cell after the mitosis of the androspore and are dispersed in the vegetative cytoplasm during its maturity. The relationship between the pollen storage substances and the ontogeny of the layers in the sporoderm, formation of the generative cell, and the male germ unit were discussed.

Occurrence of xyloglucan containing protuberances in the storage cell walls of cotyledons of Hymenaea courbaril L.

Despite the suggestions of its pectic composition, no clear evidence for this has been presented. Here we show the occurrence of such a structure in walls of cells from cotyledons of Hymenaea courbariI L. These cells are known to accumulate large amounts of storage xyloglucan in the wall and, in this case, the protuberances seem to contain this storage polysaccharide rather than pectin. A hypothetical sequence of events leading from wall strands to protuberances was assembled based on scanning electron microscopy observations. On this basis, a tentative model for how polysaccharides are distributed into the wall, near the regions where protuberances are found, is proposed to explain the presence of storage xyloglucan in their composition.

Effects of moisture content and temperature during storage on germination of the achenes of Bidens gardneri Baker

Bidens gardneri is a herbaceous species of the cerrados, whose seeds are light sensitive at 25 °C, but they become indifferent to light when stored in soil. In this work the effects of moisture content, temperature and light (during storage) upon light sensitivity during germination were studied. Ripe achenes were collected in the cerrados of Itirapina and Moji Guaçu, State of São Paulo, Brazil. The storage conditions of the achenes varied in each experiment. Achenes were stored in darkness or light, in closed bottles, at 4 °C, 20/30 °C or 25 °C. Achenes were imbibed for 24 h at 4 °C, 25 °C or 20/30 °C (in darkness) and then stored for 1, 10, 20, 30 and 40 days (40 days only for 4 °C and 25 °C). Germination tests were conducted at 25 °C and 20/30 °C. The achenes not previously imbibed showed sensitivity to light during germination. High moisture content did not affect light sensitivity of the achenes during germination but high moisture content together with storage temperatures of 25 °C and 20/30 °C had a deleterious effect upon the longevity of the achenes. Alternate temperatures during germination did not change the light sensitivity of newly collected achenes from Itirapina but changed the light sensitivity of the achenes stored imbibed at 4 °C in darkness. Alternate temperatures during storage of achenes with low moisture content did not change their photoblastism when germination was carried out at 25 °C. Alternate temperatures during storage of achenes with high moisture content followed by alternate temperatures during germination changed the light sensitivity of the achenes.

Germination of spores and growth of gametophytes and sporophytes of Rumohra adiantiformis (Forst.) Ching (Dryopteridaceae) after spore cryogenic storage

Rumohra adiantiformis (Forst.) Ching is a fern (Dryopteridaceae) used in floral arrangements. Spores sterilized in 15% (v/v) solution of commercial sodium hypochlorite for 10 minutes and unsterilized spores were plunged in liquid nitrogen and held for 15 minutes and for 90 days. After the cryogenic treatments, spores were taken out of liquid nitrogen and rapidly thawed out in a water bath or slowly at room temperature and were cultured in Mohr's mineral solution as modified by Dyer, kept at 25 ± 2 ºC and a 16-hours photoperiod. Statistical differences were not observed in the germination of unsterilized spores immersed or not immersed in liquid nitrogen, but when the spores were previously sterilized, a severe inhibition of germination was observed in cryopreserved spores. Faster mean germination time was observed for unsterilized spores cryopreserved in liquid nitrogen for 15 minutes. The germination of spores stored in liquid nitrogen for 90 days reached the maximum percentage after 12 days, while control spores reached their maximum percentage after 16 days. Levels of soluble sugars did not vary among treatments in gametophytes cultivated for 10 weeks after spore inoculation. The number of fronds and the length of the longest frond on sporophytes did not differ statistically among treatments. The relative growth rate of sporophytes grown from cryopreserved and control spores were not statistically different among treatments. Spores of R. adiantiformis immersed in liquid nitrogen for 15 minutes apparently produced phenotypically normal plants.