116 resultados para dry meadow flora
Resumo:
O objetivo deste trabalho foi caracterizar e comparar a estrutura de florestas secundárias, com quatro anos de idade, no nordeste do Pará, que foram formadas após o uso dos trituradores florestais Ahwi FM600 (T1) e Tritucap (T2). O estudo foi realizado em cinco áreas de pequenos produtores, cada uma dividida em parcelas que totalizavam 60 m² por área de estudo. Foi encontrada diversidade média (H') de 2,84 para as áreas T1 e 2,95 para as T2. A densidade média foi 530.167 indivíduos ha-1 nas áreas T1 e 459.556 indivíduos ha-1 nas T2; a média de área basal das T1 foi 1,25 m² ha-1 e a das T2, 4,55 m² ha-1; a biomassa seca estimada para as áreas T1 foi de 2,37 t ha-1 e 6,68 t ha-1 para as T2. Ocorrem diferenças estruturais nas florestas secundárias, formadas após a utilização dos trituradores.
Resumo:
The objective of this work was to determine the most susceptible nymphal stage of Bemisia tabaci biotype B to neem (Azadirachta indica A. Juss.) oil applied to dry bean (Phaseolus vulgaris L.) in a screenhouse. A solution of commercial oil (Dalneem) extracted from neem seeds was sprayed directly on each nymphal instar at 0, 0.1, 0.25, 0.5, 1 and 2% concentrations for lethal concentration (LC) determination, and at 0, 0.5 and 1% concentrations for lethal time (LT) determination. The number of living and dead nymphs was recorded five days after spraying for LC determination, and daily during six days for LT determination. The LC50 estimated for fourth instar nymphs occurred at 0.56% concentration. For all instars, LC50 and LC95 were estimated at 0.32 and 2.78% concentrations, respectively. The estimated values of LT50 at 1% concentration were 2.46, 4.45, 3.02 and 6.98 days for the first to fourth instars, respectively. The LT50 occurred at five days for 0.5% and at four days for 1% concentration in all instars. A mortality rate of over 80% was observed on the 6th day for the first to third instars at 1% concentration. The first three nymphal stages were more susceptible to neem oil when compared to the fourth nymphal stage.
Resumo:
The objective of this work was to investigate possible maternal effects on potassium content of common bean seeds, as well as to estimate the heritability and selection gains in early hybrid generations for this character and to evaluate the efficiency of genetic selection to improve the nutritional quality of common bean (Phaseolus vulgaris). Crosses with four cultivars from the Mesoamerican gene pool yielded the reciprocal F1 and F2 generations and the backcrossed populations (BCP1 and BCP2). The potassium content of the progenies was measured via nitric‑perchloric digestion and flame photometry. The potassium content in the tested progenies varied from 6.0 to 14.9 g kg-1 dry matter, and no significant maternal effect was observed. The narrow-sense heritability ranged from low (33.26%) to intermediate (43.05%). Partial dominance was observed for low potassium content in the seeds. No increase in potassium content was obtained through selection. Breeding common bean plants for increasing potassium content in seeds may be difficult because the local environment strongly influences the character.
Resumo:
The objective of this work was to develop and validate linear regression models to estimate the production of dry matter by Tanzania grass (Megathyrsus maximus, cultivar Tanzania) as a function of agrometeorological variables. For this purpose, data on the growth of this forage grass from 2000 to 2005, under dry‑field conditions in São Carlos, SP, Brazil, were correlated to the following climatic parameters: minimum and mean temperatures, degree‑days, and potential and actual evapotranspiration. Simple linear regressions were performed between agrometeorological variables (independent) and the dry matter accumulation rate (dependent). The estimates were validated with independent data obtained in São Carlos and Piracicaba, SP, Brazil. The best statistical results in the development and validation of the models were obtained with the agrometeorological parameters that consider thermal and water availability effects together, such as actual evapotranspiration, accumulation of degree‑days corrected by water availability, and the climatic growth index, based on average temperature, solar radiation, and water availability. These variables can be used in simulations and models to predict the production of Tanzania grass.
Resumo:
The objective of this work was to evaluate the genetic variability of common bean lines for cycle, weight of 100 grains, grain yield, cooking time, and grain calcium and iron concentrations. Twenty-four common bean lines were evaluated in two crop cycles (2010 and 2011). The ¯Z index was used for the selection of superior lines for most of the traits. The DF 06-19, DF 06-03, DF 06-17, DF 06-20, DF 06-11, DF 06-14, DF 06-01, DF 06-08, DF 06-22, and DF 06-04 lines showed high grain yield. All lines were of semi-early cycle and of fast cooking. The DF 06-08 and DF 06-23 lines showed high calcium concentration in grains (>1.4 g kg-1 dry matter - DM), and the DF 06-09, DF 06-03, DF 06-04, and DF 06-06 lines presented high iron concentration in grains (>0.95 g kg-1 DM) in the two crop cycles. The DF 06-09 and DF 06-03 carioca lines present high agronomic performance and high iron concentration in grains. The DF 06-17 and DF 06-08 black lines present high agronomic performance and high calcium concentration in grains. The selection of the DF 06-09, DF 06-03, DF 06-17, and DF 06-08 lines is recommended.
Resumo:
The objective of this work was to identify sources of resistance to dry root rot induced by Fusarium sp. in cassava accessions. A macroconidial suspension (20 µL) of 11 Fusarium sp. isolates was inoculated in cassava roots, from 353 acessions plus seven commercial varieties. Ten days after inoculation, the total area colonized by the pathogen on the root pulp was evaluated by digital image analysis. Cluster analysis revealed the presence of five groups regarding resistance. The root lesion areas ranged from 18.28 to 1,096.07 mm² for the accessions BGM 1518 and BGM 556, respectively. The genotypes BGM 1042, BGM 1552, BGM 1586, BGM 1598, and BGM 1692 present the best agronomical traits.
Resumo:
Abstract:The objective of this work was to evaluate the effect of nitrogen fertilization on the growth and yield of arracacha (Arracacia xanthorrhiza), as well as on the plant's nutrient uptake, distribution, and removal. The experiment was carried out in a typical Oxisol, with sandy texture. A randomized complete block design was used, with four replicates. The treatments consisted of five N rates: 0, 50, 100, 200, and 400 kg ha-1. The plots were composed of three 8-m-length rows, spaced at 0.60 m between rows and 0.40 m between plants. The plants were harvested after an 8-month cycle. Nitrogen fertilization significantly increased the proportion of N and S accumulated in stems, and of Ca, Mg, Fe, and Mn in leaves. N supply increased Zn distribution to stems and leaves, whereas high N rates increased Cu allocation to stems more than to the rootstock. High N rates increase plant dry matter (DM) production and nutrient uptake and removal, but do not result in the greatest yield due to the greater development of leaves and stems, and to the lower allocation of DM in storage roots.
Resumo:
This paper describes the development and validation of an UV-Visible spectrophotometric method for quantitation of genistein and genistin in soy dry extracts, after reaction with aluminum chloride. The method showed to be linear (r²= 0.9999), precise (R.S.D. < 2%), accurate (recovery of 101.56%) and robust. Seven samples of soy dry extracts were analyzed by the spectrophotometric validated method and by RP-HPLC. Genistein concentrations determined by spectrophotometry (0.63% - 16.05%) were slightly higher than values obtained by HPLC analysis (0.40% - 12.79%); however, the results of both methods showed a strong correlation.
Resumo:
The influence of metal loading and support surface functional groups (SFG) on methane dry reforming (MDR) over Ni catalysts supported on pine-sawdust derived activated carbon were studied. Using pine sawdust as the catalyst support precursor, the smallest variety and lowest concentration of SFG led to best Ni dispersion and highest catalytic activity, which increased with Ni loading up to 3 Ni atoms nm-2. At higher Ni loading, the formation of large metal aggregates was observed, consistent with a lower "apparen" surface area and a decrease in catalytic activity. The H2/CO ratio rose with increasing reaction temperature, indicating that increasingly important side reactions were taking place in addition to MDR.
Resumo:
The effectiveness of fungicides in controlling white mold (Sclerotinia sclerotiorum) of dry beans (Phaseolus vulgaris) was evaluated when they were applied through irrigation water directly onto the plants or only to the soil. Two field trials were installed in April 1998 and April 1999 in Viçosa, MG. Trials were conducted as a (2 x 3) + 1 factorial: two fungicides x three application modes + one untreated control. The fungicides were benomyl (1.0 kg a.i. ha-1) and fluazinam (0.5 l a.i. ha-1). The three application modes were: (a) by backpack sprayer (667 l ha-1), (b) by garden watering-cans simulating sprinkler irrigation with 35,000 l ha-1 of water, and (c) by garden watering-cans applying water between the rows and near the soil surface in 35,000 l ha-1 of water. In 1998, fungicides were applied at 43 and 54 days after emergence (DAE); in 1999, at 47 and 61 DAE. Both fungicides were similarly effective on white mold control when applied by either chemigation or backpack sprayer, resulting in yields 21% higher than untreated control. Only fluazinam provided disease control when applications were made only in soil. Chemigation provided white mold control equivalent to that of backpack sprayer in terms of incidence, severity and number of diseased pods. Consequently, yield differences between these application methods were not significant.
Resumo:
Esta nota é a primeira contribuição para a distribuição especial das algas marinhas do litoral paranaense (Caiobá). São considerados três tipos de litoral: a) Litoral rochoso sujeito à ação de arrebentação. b) Litoral rochoso mais ou menos abrigado. c) Manguesais. Dentro do esquema proposto, o primeiro tipo é subdividido em 2 zonas: 1.º) Zona dos borrifos, situada acima do limite médio da maré alta (fig. 2 n.º 1), correspondente à "Splash zone" ou à "Sprit zone" dos autores estrangeiros. 2.º) Zona de arrebentação (Ressaca), situada entre os níveis médios das marés baixa e alta, correspondendo à "Interdital zone" ou à "Gezeitenzone" dos autores estrangeiros, (fig. 2 n.º 2). A primeira zona só conta com uma alga, Lyngbya confervoides e pelo menos mais duas espécies de moluscos do gênero Littorina. A segunda zona, a mais rica tanto em algas como em animais, é essencialmente caracterizada em Caiobá pelas algas seguintes: Levringia sp. Chaetomorpha media e Centroceras clavulatum na parte mais alta, associadas a balanoides (craca) e a Mytilus perna (marisco). Mais abaixo domina Pterosiphonia pennata, Hypnea musciformis e Bryocladia thyrsigera. São apresentados também mais três tipos secundários dependendo das condições locais dos rochedos. Esta sucessão de Littorina, Balanus e Mytilus é a mesma existente no sul da África, segundo se depreende dos trabalhos de Stephenson (11,12) e de vários de seus colaboradores. O segundo tipo apresenta também duas zonas, sendo a segunda a mais rica e variada, aparecendo aqui como dominante, uma associação na qual, Callithamnion, Laurencia papulosa, Gigartina Teedii e Sargassum cymosum são as mais abundantes. É sugerida a existência de uma zona abaixo do limite inferior das marés baixas, zona essa representada por Rhodymenia Palmetta, Plocamium brasiliensis e Spatoglossum Schroederi pelo menos. É feita uma rápida enumeração das algas dos manguesais.
Resumo:
Estudou-se um fragmento de Floresta Estacional Semidecidual Submontana, localizado no município de Viçosa (20º35' a 28º50'S e 42º45' a 43º00'W), no Estado de Minas Gerais. Os dados apresentados resultam de uma amostragem fitossociológica realizada em uma área de 1 hectare quadrado. Foram relacionados todos os indivíduos arbóreos que apresentavam circunferência de tronco à altura do peito maior ou igual a 15 cm, o que resultou em121 espécies, compreendendo 89 gêneros, distribuídos em 39 famílias. Considerando os gêneros, as famílias mais bem representadas foram Leguminosae (16), Rubiaceae (6) e Euphorbiaceae e Myrtaceae, com cinco cada uma. As famílias mais ricas em espécies foram Leguminosae (20), Lauraceae (10), Rubiaceae (9) e Flacourtiaceae (8). Dentre os gêneros encontrados, destacaram-se Ocotea e Casearia, com sete e cinco espécies, respectivamente. Entre os vários fragmentos analisados na região, o trecho de floresta estudado apresentou-se como o mais rico em espécies, considerando o mesmo critério de amostragem.
Resumo:
Realizou-se o levantamento do compartimento arbóreo-arbustivo de um fragmento de floresta estacional semidecidual montana situado em Lavras, Minas Gerais, com o objetivo de caracterizar sua composição florística e a estrutura comunitária no contexto de outros sete fragmentos próximos. Conhecido como Mata da Lagoa, o fragmento possui uma área de aproximadamente 4,0 ha e está situado nas coordenadas 21º13'11"S e 44º58'15"W e a uma altitude média de 884 m. Foram alocadas 29 parcelas de 20 ´ 20 m, para amostrar os indivíduos com diâmetro à altura do peito (DAP) ³ 5 cm; registraram-se 1.294 indivíduos de 144 espécies, 94 gêneros e 45 famílias. As distribuições diamétricas das 10 espécies mais abundantes apresentaram dois padrões distintos, aparentemente relacionados com os efeitos da fragmentação e distúrbios sobre os mecanismos de dispersão. Análises de correspondência retificada (DCA) dos dados florísticos e quantitativos de oito fragmentos florestais indicaram forte dissimilaridade entre estes, principalmente quanto à composição florística, o que é, por certo, influenciado pela alta heterogeneidade ambiental da região do Alto Rio Grande. Os padrões de dissimilaridade florística evidenciaram influência mais forte da altitude e proximidade geográfica, ao passo que os padrões de dissimilaridade estrutural apontaram influência mais forte do "status" nutricional e regime de água no solo.
Resumo:
Foi conduzido um estudo fitossociológico no Cerrado sentido restrito da Floresta Nacional de Paraopeba, comparando-se os resultados (qualitativos) com os de outras amostras. Foram estabelecidas 10 parcelas de 0,1 ha (20 x 50 m), sendo incluídas no estudo todas as árvores (C30 > 15,7 cm). Foram registrados 1.990 indivíduos/ha (densidade total) e 18,13 m²/ha (área basal total). Os valores de riqueza (73 espécies/38 famílias), de diversidade Shannon (3,57) e de uniformidade (0,83) indicaram grande heterogeneidade e baixa dominânica ecológica. Leguminosae e Vochysiaceae foram as famílias mais ricas em espécies. O grupo das árvores mortas alcançou o maior valor de importância, seguido por Qualea parviflora, Pera glabrata, Erythroxylum suberosum e Qualea grandiflora. A análise comparativa de composições florísticas de 11 cerrados indicou uma forte influência da flora de Floresta Atlântica em Cerrado marginal do interior de São Paulo. Houve influência da localização geográfica na similaridade do Cerrado de Palmas, TO, com as outras áreas.
Resumo:
The Cerrado has been the main source of firewood and charcoal in Brazil, but despite being one of the hot spots for conservation of the world's biodiversity, neither plantations of native species nor sustainable management has been adopted in the region. The aim of this work was to investigate the biomass distribution and the potential for energy production of the cerrado species. The study was conducted in a cerrado sensu stricto site at the Água Limpa Farm (15º 56'14'' S and 47º 46'08'' W) in the Cerrado Biosphere Reserve. An area of 63.54ha was divided in 20 x 50m plots and, a random sample consisting of ten of these plots, representing 1.56% of the study-site, was assessed. All woody individuals from 5 cm diameter at 30 cm above ground level were identified and measured. Each individual was felled, the twigs thinner than 3cm were discarded while the larger branches and the trunks, both with bark, were weighted separately. After that, 2.5cm transverse sections of the trunk with bark were taken at 0, 25, 50, 75 and 100% of the length. A similar sample was also taken at the base of each branch. A total of 47 species in 35 genera and 24 families were found, with an average density of 673 individuals per ha. The diameter distribution showed a reversed-J shape with 67% of the individuals up to 13cm, while the maximum diameter was 32.30cm. Seven species represented 72% of the total biomass. In general, the species with higher production per tree were among those with higher production per ha. This content was distributed by diameter classes, reaching a maximum of 2.5ton/ha between 9 to 13cm and then, decreasing to 0.96 ton/ha between 29 to 33cm diameter. Carbon sequestering was 6.2ton/ha (until the actual stage of cerrado) based on an average 50% carbon content in the dry matter. The heat combustion of the wood varied from 18,903kj/kg to 20,888kj/kg with an average of 19,942kj/kg. The smaller diameter classes fix more carbon due to the large number of small plants per ha. But, for a species that reached larger dimensions and contained individuals in all diameter classes, Vochysia thyrsoidea, one can verify an increase in carbon fixation from 1.41 kg/ha in the first class (5 to 9cm) to 138,3kg/ha in the last (25 to 33cm). That indicates that it is possible to select species that reach larger size with a higher capacity of carbon accumulation per plant. The species that reached larger dimensions, with a production per tree above average and had high calorific power values were Dalbergia miscolobium, Pterodon pubescens and Sclerolobium paniculatum. These species have potential for use in fuelwood plantations and sustainable management.